PREDICTION AND ANALYSIS OF GEOMECHANICAL PROPERTIES OF JIMUSAER SHALE USING A MACHINE LEARNING APPROACH

2021 ◽  
Author(s):  
Lianteng Song ◽  
◽  
Zhonghua Liu ◽  
Chaoliu Li ◽  
Congqian Ning ◽  
...  
Keyword(s):  
Machine Learning ◽  
Cross Validation ◽  
Gamma Ray ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
Sequential Data ◽  
Log Data ◽  
Geomechanical Properties ◽  
Single Well

Geomechanical properties are essential for safe drilling, successful completion, and exploration of both conven-tional and unconventional reservoirs, e.g. deep shale gas and shale oil. Typically, these properties could be calcu-lated from sonic logs. However, in shale reservoirs, it is time-consuming and challenging to obtain reliable log-ging data due to borehole complexity and lacking of in-formation, which often results in log deficiency and high recovery cost of incomplete datasets. In this work, we propose the bidirectional long short-term memory (BiL-STM) which is a supervised neural network algorithm that has been widely used in sequential data-based pre-diction to estimate geomechanical parameters. The pre-diction from log data can be conducted from two differ-ent aspects. 1) Single-Well prediction, the log data from a single well is divided into training data and testing data for cross validation; 2) Cross-Well prediction, a group of wells from the same geographical region are divided into training set and testing set for cross validation, as well. The logs used in this work were collected from 11 wells from Jimusaer Shale, which includes gamma ray, bulk density, resistivity, and etc. We employed 5 vari-ous machine learning algorithms for comparison, among which BiLSTM showed the best performance with an R-squared of more than 90% and an RMSE of less than 10. The predicted results can be directly used to calcu-late geomechanical properties, of which accuracy is also improved in contrast to conventional methods.

scholarly journals Machine Learning-Based Vehicle Trajectory Prediction Using V2V Communications and On-Board Sensors

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 420
Author(s):  
Dongho Choi ◽  
Janghyuk Yim ◽  
Minjin Baek ◽  
Sangsun Lee
Keyword(s):  
Machine Learning ◽  
Prediction Models ◽  
Short Term Memory ◽  
Prediction Method ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
Trajectory Prediction ◽  
Target Vehicle ◽  
Decoder Architecture ◽  
V2v Communications

Predicting the trajectories of surrounding vehicles is important to avoid or mitigate collision with traffic participants. However, due to limited past information and the uncertainty in future driving maneuvers, trajectory prediction is a challenging task. Recently, trajectory prediction models using machine learning algorithms have been addressed solve to this problem. In this paper, we present a trajectory prediction method based on the random forest (RF) algorithm and the long short term memory (LSTM) encoder-decoder architecture. An occupancy grid map is first defined for the region surrounding the target vehicle, and then the row and the column that will be occupied by the target vehicle at future time steps are determined using the RF algorithm and the LSTM encoder-decoder architecture, respectively. For the collection of training data, the test vehicle was equipped with a camera and LIDAR sensors along with vehicular wireless communication devices, and the experiments were conducted under various driving scenarios. The vehicle test results demonstrate that the proposed method provides more robust trajectory prediction compared with existing trajectory prediction methods.

Using Machine Learning Algorithms on Prediction of Stock Price

2020 ◽  
Vol 12 (2) ◽  
pp. 84-99
Author(s):  
Li-Pang Chen
Keyword(s):  
Machine Learning ◽  
Stock Price ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Short Term ◽  
Learning Techniques ◽  
Historical Database ◽  
Long Short Term Memory

In this paper, we investigate analysis and prediction of the time-dependent data. We focus our attention on four different stocks are selected from Yahoo Finance historical database. To build up models and predict the future stock price, we consider three different machine learning techniques including Long Short-Term Memory (LSTM), Convolutional Neural Networks (CNN) and Support Vector Regression (SVR). By treating close price, open price, daily low, daily high, adjusted close price, and volume of trades as predictors in machine learning methods, it can be shown that the prediction accuracy is improved.

Optimization of Diabetes Training DATA using Machine Learning Algorithms

2018 ◽  
Vol 6 (2) ◽  
pp. 283-286
Author(s):  
M. Samba Siva Rao ◽  
◽  
M.Yaswanth . ◽  
K. Raghavendra Swamy ◽  
◽  
...  
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Training Data

Prediction of K562 Cells Functional Inhibitors Based on Machine Learning Approaches

2020 ◽  
Vol 25 (40) ◽  
pp. 4296-4302 ◽  
Author(s):  
Yuan Zhang ◽  
Zhenyan Han ◽  
Qian Gao ◽  
Xiaoyi Bai ◽  
Chi Zhang ◽  
...  
Keyword(s):  
Machine Learning ◽  
Inclusion Bodies ◽  
Cross Validation ◽  
Independent Set ◽  
K562 Cells ◽  
Machine Learning Algorithms ◽  
Learning Approaches ◽  
Validation Test ◽  
Excess Number ◽  
Fold Cross Validation

Background: β thalassemia is a common monogenic genetic disease that is very harmful to human health. The disease arises is due to the deletion of or defects in β-globin, which reduces synthesis of the β-globin chain, resulting in a relatively excess number of α-chains. The formation of inclusion bodies deposited on the cell membrane causes a decrease in the ability of red blood cells to deform and a group of hereditary haemolytic diseases caused by massive destruction in the spleen. Methods: In this work, machine learning algorithms were employed to build a prediction model for inhibitors against K562 based on 117 inhibitors and 190 non-inhibitors. Results: The overall accuracy (ACC) of a 10-fold cross-validation test and an independent set test using Adaboost were 83.1% and 78.0%, respectively, surpassing Bayes Net, Random Forest, Random Tree, C4.5, SVM, KNN and Bagging. Conclusion: This study indicated that Adaboost could be applied to build a learning model in the prediction of inhibitors against K526 cells.

Machine Learning Based Predictive Action on Categorical Non-Sequential Data

2020 ◽  
Vol 13 (5) ◽  
pp. 1020-1030
Author(s):  
Pradeep S. ◽  
Jagadish S. Kallimani
Keyword(s):  
Machine Learning ◽  
Data Analysis ◽  
Categorical Data ◽  
Numerical Data ◽  
Processing Technique ◽  
Machine Learning Algorithms ◽  
Sequential Data ◽  
Industry Standard ◽  
Robust Model ◽  
Future Work

Background: With the advent of data analysis and machine learning, there is a growing impetus of analyzing and generating models on historic data. The data comes in numerous forms and shapes with an abundance of challenges. The most sorted form of data for analysis is the numerical data. With the plethora of algorithms and tools it is quite manageable to deal with such data. Another form of data is of categorical nature, which is subdivided into, ordinal (order wise) and nominal (number wise). This data can be broadly classified as Sequential and Non-Sequential. Sequential data analysis is easier to preprocess using algorithms. Objective: The challenge of applying machine learning algorithms on categorical data of nonsequential nature is dealt in this paper. Methods: Upon implementing several data analysis algorithms on such data, we end up getting a biased result, which makes it impossible to generate a reliable predictive model. In this paper, we will address this problem by walking through a handful of techniques which during our research helped us in dealing with a large categorical data of non-sequential nature. In subsequent sections, we will discuss the possible implementable solutions and shortfalls of these techniques. Results: The methods are applied to sample datasets available in public domain and the results with respect to accuracy of classification are satisfactory. Conclusion: The best pre-processing technique we observed in our research is one hot encoding, which facilitates breaking down the categorical features into binary and feeding it into an Algorithm to predict the outcome. The example that we took is not abstract but it is a real – time production services dataset, which had many complex variations of categorical features. Our Future work includes creating a robust model on such data and deploying it into industry standard applications.

Derivation of Respiratory Metrics in Health and Asthma; Machine Learning Methodology (Preprint)

2020 ◽  
Author(s):  
Joseph Prinable ◽  
Peter Jones ◽  
David Boland ◽  
Alistair McEwan ◽  
Cindy Thamrin
Keyword(s):  
Machine Learning ◽  
Short Term Memory ◽  
Reference Signal ◽  
Machine Learning Algorithms ◽  
Training Dataset ◽  
Local Health ◽  
Strongly Correlated ◽  
Human Research Ethics ◽  
Expiration Time ◽  
Wide Variability

BACKGROUND The ability to continuously monitor breathing metrics may have indications for general health as well as respiratory conditions such as asthma. However, few studies have focused on breathing due to a lack of available wearable technologies. OBJECTIVE Examine the performance of two machine learning algorithms in extracting breathing metrics from a finger-based pulse oximeter, which is amenable to long-term monitoring. METHODS Pulse oximetry data was collected from 11 healthy and 11 asthma subjects who breathed at a range of controlled respiratory rates. UNET and Long Short-Term memory (LSTM) algorithms were applied to the data, and results compared against breathing metrics derived from respiratory inductance plethysmography measured simultaneously as a reference. RESULTS The UNET vs LSTM model provided breathing metrics which were strongly correlated with those from the reference signal (all p<0.001, except for inspiratory:expiratory ratio). The following relative mean bias(95% confidence interval) were observed: inspiration time 1.89(-52.95, 56.74)% vs 1.30(-52.15, 54.74)%, expiration time -3.70(-55.21, 47.80)% vs -4.97(-56.84, 46.89)%, inspiratory:expiratory ratio -4.65(-87.18, 77.88)% vs -5.30(-87.07, 76.47)%, inter-breath intervals -2.39(-32.76, 27.97)% vs -3.16(-33.69, 27.36)%, and respiratory rate 2.99(-27.04 to 33.02)% vs 3.69(-27.17 to 34.56)%. CONCLUSIONS Both machine learning models show strongly correlation and good comparability with reference, with low bias though wide variability for deriving breathing metrics in asthma and health cohorts. Future efforts should focus on improvement of performance of these models, e.g. by increasing the size of the training dataset at the lower breathing rates. CLINICALTRIAL Sydney Local Health District Human Research Ethics Committee (#LNR\16\HAWKE99 ethics approval).

scholarly journals Predicting Future Occurrence of Acute Hypotensive Episodes Using Noninvasive and Invasive Features

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 445-451
Author(s):  
Yifei Sun ◽  
Navid Rashedi ◽  
Vikrant Vaze ◽  
Parikshit Shah ◽  
Ryan Halter ◽  
...  
Keyword(s):  
Machine Learning ◽  
Support Vector Machine ◽  
Real World ◽  
Short Term Memory ◽  
Model Performance ◽  
Learning Technologies ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Continuous Map

ABSTRACT Introduction Early prediction of the acute hypotensive episode (AHE) in critically ill patients has the potential to improve outcomes. In this study, we apply different machine learning algorithms to the MIMIC III Physionet dataset, containing more than 60,000 real-world intensive care unit records, to test commonly used machine learning technologies and compare their performances. Materials and Methods Five classification methods including K-nearest neighbor, logistic regression, support vector machine, random forest, and a deep learning method called long short-term memory are applied to predict an AHE 30 minutes in advance. An analysis comparing model performance when including versus excluding invasive features was conducted. To further study the pattern of the underlying mean arterial pressure (MAP), we apply a regression method to predict the continuous MAP values using linear regression over the next 60 minutes. Results Support vector machine yields the best performance in terms of recall (84%). Including the invasive features in the classification improves the performance significantly with both recall and precision increasing by more than 20 percentage points. We were able to predict the MAP with a root mean square error (a frequently used measure of the differences between the predicted values and the observed values) of 10 mmHg 60 minutes in the future. After converting continuous MAP predictions into AHE binary predictions, we achieve a 91% recall and 68% precision. In addition to predicting AHE, the MAP predictions provide clinically useful information regarding the timing and severity of the AHE occurrence. Conclusion We were able to predict AHE with precision and recall above 80% 30 minutes in advance with the large real-world dataset. The prediction of regression model can provide a more fine-grained, interpretable signal to practitioners. Model performance is improved by the inclusion of invasive features in predicting AHE, when compared to predicting the AHE based on only the available, restricted set of noninvasive technologies. This demonstrates the importance of exploring more noninvasive technologies for AHE prediction.

scholarly journals Financial Context News Sentiment Analysis for the Lithuanian Language

2021 ◽  
Vol 11 (10) ◽  
pp. 4443
Author(s):  
Rokas Štrimaitis ◽  
Pavel Stefanovič ◽  
Simona Ramanauskaitė ◽  
Asta Slotkienė
Keyword(s):  
Machine Learning ◽  
Sentiment Analysis ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Supervised Machine Learning ◽  
Experimental Investigations ◽  
Support Vector ◽  
Applied Machine Learning ◽  
Bayes Algorithm ◽  
Website Content

Financial area analysis is not limited to enterprise performance analysis. It is worth analyzing as wide an area as possible to obtain the full impression of a specific enterprise. News website content is a datum source that expresses the public’s opinion on enterprise operations, status, etc. Therefore, it is worth analyzing the news portal article text. Sentiment analysis in English texts and financial area texts exist, and are accurate, the complexity of Lithuanian language is mostly concentrated on sentiment analysis of comment texts, and does not provide high accuracy. Therefore in this paper, the supervised machine learning model was implemented to assign sentiment analysis on financial context news, gathered from Lithuanian language websites. The analysis was made using three commonly used classification algorithms in the field of sentiment analysis. The hyperparameters optimization using the grid search was performed to discover the best parameters of each classifier. All experimental investigations were made using the newly collected datasets from four Lithuanian news websites. The results of the applied machine learning algorithms show that the highest accuracy is obtained using a non-balanced dataset, via the multinomial Naive Bayes algorithm (71.1%). The other algorithm accuracies were slightly lower: a long short-term memory (71%), and a support vector machine (70.4%).

57 Precision neoantigen discovery using novel algorithms and expanded HLA-ligandome datasets

2020 ◽  
Vol 8 (Suppl 3) ◽  
pp. A62-A62
Author(s):  
Dattatreya Mellacheruvu ◽  
Rachel Pyke ◽  
Charles Abbott ◽  
Nick Phillips ◽  
Sejal Desai ◽  
...  
Keyword(s):  
Machine Learning ◽  
Cell Lines ◽  
Antigen Processing ◽  
Large Scale ◽  
Prediction Models ◽  
K562 Cells ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
High Quality ◽  
Tissue Samples

BackgroundAccurately identified neoantigens can be effective therapeutic agents in both adjuvant and neoadjuvant settings. A key challenge for neoantigen discovery has been the availability of accurate prediction models for MHC peptide presentation. We have shown previously that our proprietary model based on (i) large-scale, in-house mono-allelic data, (ii) custom features that model antigen processing, and (iii) advanced machine learning algorithms has strong performance. We have extended upon our work by systematically integrating large quantities of high-quality, publicly available data, implementing new modelling algorithms, and rigorously testing our models. These extensions lead to substantial improvements in performance and generalizability. Our algorithm, named Systematic HLA Epitope Ranking Pan Algorithm (SHERPA™), is integrated into the ImmunoID NeXT Platform®, our immuno-genomics and transcriptomics platform specifically designed to enable the development of immunotherapies.MethodsIn-house immunopeptidomic data was generated using stably transfected HLA-null K562 cells lines that express a single HLA allele of interest, followed by immunoprecipitation using W6/32 antibody and LC-MS/MS. Public immunopeptidomics data was downloaded from repositories such as MassIVE and processed uniformly using in-house pipelines to generate peptide lists filtered at 1% false discovery rate. Other metrics (features) were either extracted from source data or generated internally by re-processing samples utilizing the ImmunoID NeXT Platform.ResultsWe have generated large-scale and high-quality immunopeptidomics data by using approximately 60 mono-allelic cell lines that unambiguously assign peptides to their presenting alleles to create our primary models. Briefly, our primary ‘binding’ algorithm models MHC-peptide binding using peptide and binding pockets while our primary ‘presentation’ model uses additional features to model antigen processing and presentation. Both primary models have significantly higher precision across all recall values in multiple test data sets, including mono-allelic cell lines and multi-allelic tissue samples. To further improve the performance of our model, we expanded the diversity of our training set using high-quality, publicly available mono-allelic immunopeptidomics data. Furthermore, multi-allelic data was integrated by resolving peptide-to-allele mappings using our primary models. We then trained a new model using the expanded training data and a new composite machine learning architecture. The resulting secondary model further improves performance and generalizability across several tissue samples.ConclusionsImproving technologies for neoantigen discovery is critical for many therapeutic applications, including personalized neoantigen vaccines, and neoantigen-based biomarkers for immunotherapies. Our new and improved algorithm (SHERPA) has significantly higher performance compared to a state-of-the-art public algorithm and furthers this objective.

scholarly journals Drill-Core Mineral Abundance Estimation Using Hyperspectral and High-Resolution Mineralogical Data

2020 ◽  
Vol 12 (7) ◽  
pp. 1218
Author(s):  
Laura Tuşa ◽  
Mahdi Khodadadzadeh ◽  
Cecilia Contreras ◽  
Kasra Rafiezadeh Shahi ◽  
Margret Fuchs ◽  
...  
Keyword(s):  
Machine Learning ◽  
High Resolution ◽  
Ore Deposits ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
Support Vector ◽  
Drill Core ◽  
Data Types ◽  
Mineralogical Characterization ◽  
Core Samples

Due to the extensive drilling performed every year in exploration campaigns for the discovery and evaluation of ore deposits, drill-core mapping is becoming an essential step. While valuable mineralogical information is extracted during core logging by on-site geologists, the process is time consuming and dependent on the observer and individual background. Hyperspectral short-wave infrared (SWIR) data is used in the mining industry as a tool to complement traditional logging techniques and to provide a rapid and non-invasive analytical method for mineralogical characterization. Additionally, Scanning Electron Microscopy-based image analyses using a Mineral Liberation Analyser (SEM-MLA) provide exhaustive high-resolution mineralogical maps, but can only be performed on small areas of the drill-cores. We propose to use machine learning algorithms to combine the two data types and upscale the quantitative SEM-MLA mineralogical data to drill-core scale. This way, quasi-quantitative maps over entire drill-core samples are obtained. Our upscaling approach increases result transparency and reproducibility by employing physical-based data acquisition (hyperspectral imaging) combined with mathematical models (machine learning). The procedure is tested on 5 drill-core samples with varying training data using random forests, support vector machines and neural network regression models. The obtained mineral abundance maps are further used for the extraction of mineralogical parameters such as mineral association.

Sign in / Sign up

Export Citation Format

Share Document