scholarly journals Implementation of Geolocation and Jquery Latest For Salesman Monitoring in Android Based Applications

2021 ◽  
Vol 5 (2) ◽  
pp. 163
Author(s):  
Ganda Yoga Swara ◽  
Putri Mandarani ◽  
G Giatman ◽  
S Syahril
Keyword(s):  
System Design ◽  
Success Rate ◽  
Failure Rate ◽  
Experimental Research ◽  
Open Space ◽  
Tracking System ◽  
Data Entry ◽  
Activity Monitoring ◽  
Analysis System ◽  
Monitoring Application

The purpose of this study is to design a sales activity monitoring application by utilizing the existing GPS on a smartphone. This research is an experimental research with the waterfall method. There are 5 stages in the waterfall method, namely requirements analysis, system design, implementation, integration & testing, operation & maintenance. Testing is done by testing the latest geolocation and jquery to see the success, failure or delay in the three test locations. The result of this research is that under the tree the highest success rate is 0.875, the lowest failure rate is 0.125 and the smallest delay (distance between data entry) is 0.45. The conclusion of this study is that the tracking system using Geolocation and the Latest jQuery if implemented in an open space with conditions under trees gets the highest rating compared to other test locations

scholarly journals RANCANG BANGUN SISTEM TRACKING JASA LAUNDRY SEPATU DI CLINIX SHOES CARE BERBASIS WEBSITE

2021 ◽  
Vol 5 (1) ◽  
pp. 73-76
Author(s):  
Febriyan Saragih ◽  
◽  
Yulia Agustina Dalimunthe ◽  
Husni Lubis
Keyword(s):  
System Design ◽  
Tracking System ◽  
Requirements Analysis ◽  
Writing Program ◽  
Program Code ◽  
Important Thing ◽  
The Status ◽  
Long Time ◽  
Analysis System

The matter of time still being an important thing in a shoe’s laundry services, because it can take a long time to get a shoes laundry. That’s why it required a tracking system to checking a status from our shoes at the clinix shoes and care laundry. The making of this system uses the method, waterfall starting from requirements analysis, system design, writing program code, testing programs, implementing programs, and writing program code in a structured manner. Writing program code using PHP, MySQL database and using the framework. With Codeigniter 3 this tracking system, customers can input the receipts provided by the admin clinix shoes care, to find out the status of shoes being laundered, and in this tracking system the customer can also check rates laundry.

Effects of shoulder translation on lumbar moment for two dimensional modeling strategies during lifting

1998 ◽  
Vol 1 (3) ◽  
pp. 173-187
Author(s):  
Wayne J. Albert ◽  
Joan M. Stevenson ◽  
Geneviève A. Dumas ◽  
Roger W. Wheeler
Keyword(s):  
Sagittal Plane ◽  
Tracking System ◽  
Vertical Direction ◽  
Two Dimensional ◽  
Model Type ◽  
Trunk Acceleration ◽  
Analysis System ◽  
Trunk Orientation ◽  
Shoulder Position ◽  
Dynamic Link

The objectives of this study were to: 1) develop a dynamic 2D link segment model for lifting using the constraints of four sensors from an electromagnetic motion analysis system; 2) evaluate the magnitude of shoulder movement in the sagittal plane during lifting; and 3) investigate the effect of shoulder translation on trunk acceleration and lumbar moments calculated by the developed model and comparing it with two separate 2D dynamic link segment models. Six women and six men lifted loads of 2 kg, 7 kg, 12 kg and 2 kg, 12 kg, 22 kg respectively, under stoop, squat and freestyle conditions. Trunk orientation and position, as well as shoulder position were monitored during all lifts using the Polhemus FASTRAK\trdmk. Results indicated that average range of motion was 0.05 ± 0.02 m in the horizontal direction and 0.03 ± 0.02 m in the vertical direction. Shoulder position relative to T1 was located 0.07 ± 0.02 m anteriorly, and 0.02 ± 0.04 m superiorly (0.06 and 0.00 m for males and 0.08 and 0.04 m for females, respectively). To estimate the effect of shoulder motion on trunk acceleration and L5/S1 moments, three two-dimensional dynamic link segment models were developed within the constraints of the electromagnetic tracking system and compared. Trunk segment endpoints were defined as L5/S1 and either T1 or shoulder depending on model type. For trunk accelerations, average differences between models were greater than 40 deg/s² in 70.4% trunk accelerations did not translate into significantly different moment calculations between models. Average peak dynamic L5/S1 moment differences between models were smaller than 4 Nm for all lifting conditions which failed to be statistically significant (p>0.05). The model type did not have a statistically significant effect on peak L5/S1 moments. Therefore, despite important shoulder joint translations, peak L5/S1 moments were not significantly affected.

Wearable energy-efficient fitness tracking system for sports person health monitoring application

2021 ◽  
pp. 1-13
Author(s):  
Dan Xie ◽  
Ming Zhang ◽  
Priyan Malarvizhi Kumar ◽  
Bala Anand Muthu
Keyword(s):  
Health Monitoring ◽  
Energy Efficient ◽  
Tracking System ◽  
Path Loss ◽  
Integrated Approach ◽  
Smartphone Application ◽  
Sensor Nodes ◽  
Engineering Research ◽  
Fitness Tracking ◽  
Monitoring Application

The high potential of wearable physiological sensors in regenerative medicine and continuous monitoring of human health is currently of great interest. In measuring in real-time and non-invasively highly heterogeneous constituents, have a great deal of work and therefore been pushed into creating several sports monitoring sensors. The advanced engineering research and technology lead to the design of a wearable energy-efficient fitness tracking (WE2FT) system for sports person health monitoring application. Instantaneous accelerations are measured against pulses, and specific walking motions can be tracked by this system using a deep learning-based integrated approach of an intelligent algorithm for gait phase detection for the proposed system (WE2FT). The algorithm’s effects are addressed, and the performance has been evaluated. In this study, the algorithm uses a smartphone application to track steps using the Internet of Things (IoT) technology. For this initiative, the central node’s optimal location is measured with the antenna reflectance coefficient and CM3A path loss model (IEEE 802.15.6) among the sensor nodes for energy-efficient communication. The simulation experiment results in the highest performance in terms of energy efficiency and path loss.

A novel UWB microstrip patch antenna des for cardio activity monitoring application

2021 ◽  
Author(s):  
K. Jayamani ◽  
V. Vinodhini ◽  
V. Gomathi ◽  
S. Vanaja ◽  
S. Kalaivani ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Activity Monitoring ◽  
Microstrip Patch ◽  
Monitoring Application

Replication of Special Education Research

2016 ◽  
Vol 37 (4) ◽  
pp. 205-212 ◽  
Author(s):  
Matthew C. Makel ◽  
Jonathan A. Plucker ◽  
Jennifer Freeman ◽  
Allison Lombardi ◽  
Brandi Simonsen ◽  
...  
Keyword(s):  
Special Education ◽  
Education Research ◽  
Success Rate ◽  
Research Design ◽  
Experimental Research ◽  
Journal Citation Report ◽  
Research Process ◽  
Publication History ◽  
Central Tenet ◽  
History Of

Increased calls for rigor in special education have often revolved around the use of experimental research design. However, the replicability of research results is also a central tenet to the scientific research process. To assess the prevalence, success rate, and authorship history of replications in special education, we investigated the complete publication history of every replication published in the 36 journals categorized by ISI Web of Knowledge Journal Citation Report as special education. We found that 0.5% of all articles reported seeking to replicate a previously published finding. More than 80% of these replications reported successfully replicating previous findings. However, replications where there was at least one author overlapping with the original article (which happens about two thirds of the time) were statistically significantly more likely to find successful results.

scholarly journals The influence of dissection on clinical anatomical knowledge for surgical needs

2021 ◽  
Author(s):  
Georg Feigl ◽  
Andreas Sammer
Keyword(s):  
Success Rate ◽  
Failure Rate ◽  
Human Body ◽  
Visceral Surgery ◽  
High Failure Rate ◽  
Anatomical Knowledge ◽  
High Good ◽  
Primary Focus ◽  
Head Neck ◽  
Dissection Course

Abstract Purpose Due to the ongoing discussion of the usefulness of dissection on human bodies in medical curricula, we investigated the influence of anatomical knowledge collected in the dissection course and requested for modules of visceral surgery. Methods Students attending the dissection course of topographic anatomy had to answer a questionnaire of 22 questions with focus on anatomical knowledge required for visceral surgical modules. Failure was defined as 13 or fewer correct answers, success categorized as high, good or moderate. The same questionnaire was handed out to 245 students prior to the module on visceral surgery. Students provided information on which regions they had dissected during the course or prior to the module. The results were compared to the result of a written Multiple Choice Question (MCQ) exam of the module visceral surgery (n = 160 students) with an unannounced primary focus on anatomy. Results Students who dissected the truncal regions of the human body succeeded in answering the questionnaire with high success. Students dissecting regions of the Head/Neck or Limbs had a high failure rate, and none of them reached the “high” success level. In the MCQ exam, students dissecting truncal regions had a high success rate, while those who had not dissected or who dissected the Head/Neck or Limbs had a high failure rate. Conclusion Dissections support and improve the required knowledge for surgical modules. For the visceral surgical module, students dissecting the region prior to the module greatly benefited. Therefore, entire human body dissection assumes to be preferable.

The Research on Rake-Car’s Driving System of Ore Reclaimer

2013 ◽  
Vol 300-301 ◽  
pp. 10-13
Author(s):  
Yuan Hui Li ◽  
Kui Sheng Chen ◽  
Jiang Hong Deng ◽  
Xin Yuan Chen
Keyword(s):  
Computer Simulation ◽  
System Design ◽  
Failure Rate ◽  
Hydraulic System ◽  
Driving Mechanism ◽  
Connecting Rod ◽  
Driving System ◽  
Final Design ◽  
Hydraulic System Design ◽  
Working Situation

Rake-car’s driving system of ore reclaimer originally used crank and connecting rod mechanism as driving mechanism. The driving mechanism got some trouble that parts got severe wear and failure rate of mechanism was high. The hydraulic system is used to drive rake car in view of hydraulic driving system’s advantage. By analysis on existing problem of crank and connecting rod mechanism, the actual working load of equipment is tested and the working situation is analysed. The working situation of the hydraulic system is also analysed by computer simulation. By optimization of the hydraulic system design, the final design is determined. The whole system is actually used. It works well.

Sign in / Sign up

Export Citation Format

Share Document