scholarly journals Production and use of waste-derived fuels in Poland: current status and perspectives

2021 ◽  
Vol 27 (1) ◽  
pp. 36-41
Author(s):  
Jurand Bień
Keyword(s):  
Energy Recovery ◽  
Recovery Process ◽  
Alternative Fuel ◽  
Cement Industry ◽  
Annual Reports ◽  
Current Status ◽  
Waste Production ◽  
The Difference ◽  
Mixed Origin ◽  
Entire Amount

Abstract In the paper issues related to the production and utilisation of waste-derived fuel (alternative fuel) in Poland are presented. Alternative fuel comes from dry residue of waste, mostly municipal, and is treated as a waste. In European Waste Catalogue waste-derived fuel is marked with 191210 code despite their municipal, industrial or mixed origin. The production and utilisation of alternative fuel were analysed with the data from sixteen polish voivodships’ annual reports. The total amount of waste-derived fuel produced in Poland exceeds 3 million tonnes annually. It means there is no balance between the amount of production and possibility of energy recovery in Poland. In 2018 only 1,54 million tons was recovered in R1 recovery process which is only half of the waste-derived fuel produced. In addition, the entire amount of fuel is used in the cement industry. In 2018 in the cement industry 1,46 millions tons of alternative fuel was used. It is estimated that the potential use of alternative fuel by cement plants in Poland is about 1.5-1.8 million tonnes. This means that greater use of alternative fuel in the cement sector is significantly limited. The difference between in the amount of fuel produced and the amount of fuel used for energy recovery in 2018 is around 1.67 million tons. This situation has a significant impact on the economy of waste management in the field of combustible waste production.

POSTPARTUM AMENORRHOEA IN RURAL EASTERN UTTAR PRADESH, INDIA

1998 ◽  
Vol 30 (2) ◽  
pp. 227-243
Author(s):  
K. N. S. YADAVA ◽  
S. K. JAIN
Keyword(s):  
Higher Education ◽  
Uttar Pradesh ◽  
Current Status Data ◽  
North India ◽  
Current Status ◽  
Data Sets ◽  
Survival Status ◽  
The Mean ◽  
The Difference ◽  
Using Data

This paper calculates the mean duration of the postpartum amenorrhoea (PPA) and examines its demographic, and socioeconomic correlates in rural north India, using data collected through 'retrospective' (last but one child) as well as 'current status' (last child) reporting of the duration of PPA.The mean duration of PPA was higher in the current status than in the retrospective data;n the difference being statistically significant. However, for the same mothers who gave PPA information in both the data sets, the difference in mean duration of PPA was not statistically significant. The correlates were identical in both the data sets. The current status data were more complete in terms of the coverage, and perhaps less distorted by reporting errors caused by recall lapse.A positive relationship of the mean duration of PPA was found with longer breast-feeding, higher parity and age of mother at the birth of the child, and the survival status of the child. An inverse relationship was found with higher education of a woman, higher education of her husband and higher socioeconomic status of her household, these variables possibly acting as proxies for women's better nutritional status.

scholarly journals Climate Change Disclosures in the Annual Reports: Evidence from Bangladesh

2017 ◽  
Vol 9 (2) ◽  
pp. 88
Author(s):  
Pappu Kumar Dey ◽  
Mohammad Nakib ◽  
Probal Dutta
Keyword(s):  
Climate Change ◽  
Water Management ◽  
Global Warming ◽  
Content Analysis ◽  
Energy Saving ◽  
Banking Industry ◽  
Stock Exchange ◽  
Listed Companies ◽  
Cement Industry ◽  
Annual Reports

This study examines the nature and extent of climate change disclosures in the corporate annual reports of the listed companies in Dhaka Stock Exchange, Bangladesh. For this purpose, annual reports related to the year 2014 of the sample 88 listed companies have been scrutinized. In regard to this study, content analysis approach has been conducted considering thirteen different disclosure issues regarding climate change. Our analysis provides the comprehension of below average climate change disclosure practices by the Bangladeshi companies, though 58 percent companies have reported at least one issue on climate change and global warming. ‘Energy saving & efficiency’ and ‘water management & pollution’ are mostly reported issues that are industry specific requirements in some case. From the viewpoint of industry, Banking industry and Cement industry have started to report some issues related to the climate change, where 4 industries out of selected 17 industries have not provided any climate change disclosure. Disseminating climate change disclosure within 10 sentences by most of the reported companies manifests the desideratum of in-depth disclosure practices.

A Basis for Automated Control of Steam Trap Subcool in SAGD

SPE Journal ◽  
2012 ◽  
Vol 17 (03) ◽  
pp. 680-686 ◽  
Author(s):  
Dharmeshkumar R. Gotawala ◽  
Ian D. Gates
Keyword(s):  
Temperature Difference ◽  
Oil Sands ◽  
Dynamic Control ◽  
Recovery Process ◽  
Steam Injection ◽  
Liquid Pool ◽  
Gravity Drainage ◽  
Approximate Theory ◽  
Smart Wells ◽  
The Difference

Summary Full steam conformance along the well pair of the steam-assisted gravity-drainage (SAGD) oil-sands-recovery process is essential for high thermal efficiency. Conformance can be improved by controlling injection and production strategies to ensure that steam is delivered to target regions in the reservoir. Smart wells use interval-control valves (ICVs) that, conceptually, can be dynamically controlled to yield uniform steam injectivity along the well pair. Dynamic control algorithms, such as proportional-integral-derivative (PID) control and their associated controller parameters, have not yet been developed for the SAGD processes that use ICVs. One control strategy would be to control the interwell subcool temperature difference—that is, the difference between the steam-injection temperature and the produced-fluids temperature. If this temperature difference is small, then the liquid pool above the production well is small and there is a likelihood of live steam production from the chamber. On the other hand, if the difference is large, the pool may rise above the injection well and gravity drainage is hindered because the chamber is largely filled with liquid. Here, the focus is on developing a simple, approximate theory for the behavior of the liquid pool at the base of the steam chamber to determine the ranges of values of control parameters to achieve a targeted interwell subcool temperature difference.

Reporting human resources in annual reports

2015 ◽  
Vol 23 (3) ◽  
pp. 256-274 ◽  
Author(s):  
Monika Kansal ◽  
Mahesh Joshi
Keyword(s):  
Human Resources ◽  
Stock Exchange ◽  
Statistical Tests ◽  
Annual Reports ◽  
Public And Private ◽  
Content Type ◽  
Industrial Sectors ◽  
Significant Difference ◽  
The Difference ◽  
Training Programmes

Purpose – The purpose of this paper is to investigate the extent of corporate disclosure on human resources (HR) in the annual reports of top performing Indian companies. Design/methodology/approach – The paper explores the extent to which top 82 companies from India present information about HR in their annual reports. This study examines the annual reports of each of the top Indian firms listed on the Bombay stock exchange, using the “content analysis” method. Statistical tests have been performed to analyse the difference between the HR disclosure score across public and private sectors and disclosure variations among various industrial sectors. Findings – In-house training programmes has been noticed to be the favourite item of disclosure followed by safety awards/certifications and statements regarding cordial relations with the employees/unions. A majority of the Indian firms have ignored significant HR issues such as employee welfare fund, maternity/paternity leaves, holiday benefits, employee loans and adopting old age homes, etc. Overall, the study reflects low HR related disclosures. No statistically significant difference has been found between the mean HR disclosure from one industry to another and disclosure practices of the private and the public sector companies. Practical implications – The disclosure pattern of the Indian companies suggests that they only a few companies are concerned about employees’ welfare than the rest. This may motivate a change of the disclosure policy of the rest of the firms who may follow the reporting pattern of the most disclosing ones. Originality/value – This is first study on the disclosure of HR by the Indian corporate sector in the CSR domain with a disclosure analysis for a period of nine years . This research provides new directions for the literature in this area and may promote comparative studies on HR-based studies from different perspectives.

scholarly journals A detailed survey of just-in-time implementation status within Libyan cement industry, and its implication for operations management

2019 ◽  
Vol 10 (3) ◽  
pp. 1081
Author(s):  
Rajab Abduallah Hokoma ◽  
Hala Mansour Amaigl
Keyword(s):  
Value Chain ◽  
Operations Management ◽  
Manufacturing Industry ◽  
Survey Methodology ◽  
Cement Industry ◽  
Current Status ◽  
Just In Time ◽  
Successful Implementation ◽  
Key Factors ◽  
Implementation Status

This paper investigates in detail the current status of the implementation levels of JIT key-factors and their sub-elements within the cement industry within Libya, and its implication for management within the said industry. A survey methodology has been applied in this detailed investigation using an intensive questionnaire and one-to-one interviews of the correspondent organizations. Based on the analysis of the survey findings, the results show that the implementation status of the JIT key-factors and their sub-elements are found to be in the modest levels across all the surveyed organisations, thereby indicating to opportunities for eliminating waste and improving the value chain. This paper has also pointed to crucial areas where the senior management body within this industry need to take immediate actions in order to achieve an effective and successful implementation of JIT systems. The paper also makes a contribution by providing an insight into what extent the JIT key-factors and their sub-elements are understood and implemented within the key Libyan manufacturing industry.

scholarly journals PREVENTIVE MEDICINE DEPARTMENT;

2012 ◽  
Vol 19 (02) ◽  
pp. 162-167
Author(s):  
MUHAMMAD AYAZ BHATTI ◽  
MAHMOOD UR RAHMAN
Keyword(s):  
Family Planning ◽  
Public Sector ◽  
Sampling Technique ◽  
Poor Performance ◽  
Cross Sectional Study ◽  
Annual Reports ◽  
Current Status ◽  
Growth Monitoring ◽  
Cross Sectional ◽  
The Public

Objectives: To measure the current status of preventive activities in civil and military hospitals. To compare the quantum ofpreventive and curative activities in the hospitals. To make recommendations for promotion of preventive activities to reduce the curative burdenfrom the hospitals. Study Design: This was a cross-sectional study. Sampling Technique: Universal sampling. All the major military and publicsector hospitals having bed strength more than 400 in Rawalpindi were included in the study. All the preventive and curative work was taken intoaccount. Methodology: A structured questionnaire was developed and data regarding the quantum of work was collected from all the fourmajor Military and civil hospitals having bed strength more than 400 beds through registers and annual reports of the hospital and was analyzedin the form of frequencies, tabulation, cross tabulation, percentages and was displayed in tables and graphs using SPSS (10.5), Microsoft Exceland calculus. Results: Only seven percent work is preventive and ninety three percent is curative. In the preventive activity MH is marginallyhigher than the rest of the hospitals. In all the hospitals among the preventive activities 31% are antenatal visits, 20 % tetanus toxoid injection,19% BCG, Growth monitoring 13%, Measles injection 11% and family planning 6% in all the hospitals. Ante natal activities in the army sectorhospitals are more prominent 39-44% and also in the public sector 17-26%. Next to the antenatal are tetanus toxoids to pregnant ladies whichrange from 16-35% in military and 16-20 % in the public sector hospitals. Growth monitoring is more efficiently carried out in the RawalpindiGeneral Hospital i.e. 17% while in others 7-12%. Family Planning services are delivered very poorly only 9% in RGH and 6% in DHQ, zero % inCMH and 5% in MH. Measles vaccination is carried out efficiently in DHQ 27%, 11% in RGH and 8% in MH and again poorly 3% in CMH. BCG is27% in DHQ, 20% in MH, 17% in RGH and 10% in CMH. Conclusions: The study show that hospitals are showing very poor performance inpreventive aspect and this is the reason that countries like Pakistan are facing economic burden on the national exchequer and this burden willkeep on increasing if no appropriate action is taken.

scholarly journals Analgesic Effect of Apotel Versus Pethidine After Hemilaminectomy

2019 ◽  
Vol 5 (4) ◽  
pp. 185-189
Author(s):  
Mohammadreza Emamhadi ◽  
◽  
Hamid Behzadnia ◽  
Seifollah Jafari ◽  
Mohammadreza Zamanidoust ◽  
...  
Keyword(s):  
Recovery Process ◽  
Cross Sectional Study ◽  
Medical Sciences ◽  
Cross Sectional ◽  
Vas Score ◽  
Relieve Pain ◽  
Present Cross Sectional Study ◽  
Significant Difference ◽  
Vas Scores ◽  
The Difference

Background: Postoperative pain is a common phenomenon, and its management affects considerably on the recovery process, and patients’ satisfaction. Apotel and pethidine are two conventional medicines used to relieve pain after operation. Objectives: The present study aimed to compare the effect of intravenous injection of Apotel and intramuscular injection of pethidine in relieving pain after hemilaminectomy. Materials & Methods: In the present cross-sectional study, 150 patients who underwent hemilaminectomy were recruited between May 2015 and November 2015. They were taking either Apotel (n=75) or pethidine (n=75) after the operation, which was done at Poursina Hospital affiliated to Guilan University of Medical Sciences, Rasht City, Iran. The patients’ pain levels were measured using visual analog scale (VAS), and the results were compared between the 2 groups. Results: There was no significant difference in the total VAS score between the Apotel and pethidine groups (P=0.189). However, there was a significant reduction in VAS score hours 2 (P=0.03) and 4 (P=0.004) hours after the injection of Apotel in this group, compared with those scores in the pethidine group. Also, VAS scores at other times (8, 12, 20, 28 hours after the injection) were lower than those in the pethidine group, but the difference was not significant. Conclusion: Apotel was better pain-killer in the early hours after the first injection compared to pethidine. But its effect was similar to pethidine at the late hours after the first injection. Therefore it seems that Apotel is better painkiller after laminectomy, especially in the early hours after the operation.

scholarly journals Emission estimates and air quality impacts from the use of alternative fuels by the Titan cement factory in Thessaloniki

2013 ◽  
Vol 14 (2) ◽  
pp. 218-224
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Alternative Fuel ◽  
Cement Industry ◽  
Partial Replacement ◽  
Limit Values ◽  
Cement Factory ◽  
Pollution Levels ◽  
Fuel Substitution ◽  
The Impact

Cement production is an energy-intensive process. Utilisation of fossil fuels is common practice in the cement industry around the world. Alternative fuel substitution rates increase every year. More specifically, 18 % of the fuel used by the European cement industry in 2006 consists of alternative fuels. This study aims to investigate the prospects for the partial replacement of conventional fossil fuels currently used in the TITAN cement factory in Thessaloniki, Greece, with alternative fuels, focusing on the impact of alternative fuel use on the emissions of air pollutants from co-incineration operations. Air emissions were estimated for both the conventional fuel and mixtures of conventional fuel with alternative fuels, based on emission factors found in the literature but also using the measurements conducted by TITAN in 2010. Emission estimates indicate that legislative limit values for all pollutants are not exceeded. Based on the emission estimates and measurements in the flue gas, the dispersion of the plume around the factory has been described with an appropriate numerical simulation model. Results suggest that the factory’s contribution to the air pollution levels in the surrounding area is very low for most regulated pollutants.

Sign in / Sign up

Export Citation Format

Share Document