scholarly journals The DC electrical Conductivity of prepared pure polypyrrole and polypyrrole /graphene (PPY/GN) nanocomposite by in-situ polymerization

2020 ◽  
Vol 18 (44) ◽  
pp. 50-61
Author(s):  
Fatima Mikdad Ahmed
Keyword(s):  
Electrical Conductivity ◽  
Room Temperature ◽  
In Situ Polymerization ◽  
Base Material ◽  
Chemical Oxidation ◽  
Nano Particles ◽  
Nano Particle ◽  
Result Show ◽  
Stretching Vibration

Abstract  In this work, pure Polypyrrole (PPy) and Polypyrrole (PPy)/Graphene (GN) was synthesized by in-situ polymerization in different weight percentages (0.1, 0.3, 0.5, 1, 3 and 5 wt.% (g)) of GN nano particles using chemical oxidation method at room temperature. The FTIR, SEM and electrical properties were studies for the nano composites. The result show that when concentration of GN Nano particle increase, the electrical conductivity increased and the graphene sheets were merging to form a continuous area of the GN through the polypyrrole base material. The FTIR spectra shows that the characteristics absorption peaks of polypyrrole that is, 1546.80, 1463.87 and 3400.27 cm-1(stretching vibration in the pyrrole ring), and at 1080.06 cm-1 was assigned to C—O stretching and at 1589.23 cm-1 was assigned to C—C vibration of carbon ring in graphene. الخلاصة حضر البولي بايرول النقي و المطعم بدرجة حرارة الغرفه بطريقة الاكسدة الكيميائية و قد تم استخدام جسيمات الكرافين النانوية و بالنسب التالية (0.1, 0.3, 0.5, 1. 3, ,5 %). و تم استخدام طيف الاشعه تحت الحمراء و ماسح الالكترون المجهري لتشخيص البولي بايرول المحضر كما قيست التوصيلية الكهربائية المستمرة و اوجدت النتائج ان التوصيلية تزداد بزيادة درجه الحرارة و كذالك بزيادة الكرافين .

3D Measurements of Nano-Particle Transport in Complex 2.5D Micro-Models

2015 ◽  
Author(s):  
Jagannath Upadhyay ◽  
Daniel S. Park ◽  
Karsten E. Thompson ◽  
Dimitris E. Nikitopoulos
Keyword(s):  
Particle Velocity ◽  
Particle Transport ◽  
Three Dimensional ◽  
Laser Scanning Microscopy ◽  
Nano Particles ◽  
Confocal Laser ◽  
Nano Particle ◽  
Micro Model ◽  
Micro Particle Image Velocimetry

A confocal Micro-Particle Image Velocimetry (C-μPIV) technique along with associated post image processing algorithms is established to quantify three dimensional distributions of nano-particle velocity and concentration at the micro-scale (pore-scale) in 2.5D porous media designed from a Boise rock sample. In addition, an in-situ, non-destructive method for measuring the geometry of the micro-model, including its depth, is described and demonstrated. The particle experiments use 900 nm fluorescence labeled polystyrene particles at a flow rate of 10 nLmin−1 and confocal laser scanning microscopy (CLSM), while in-situ geometry measurements use regular microscope along with Rhodamine dye and a depth-to-fluorescence-intensity calibration. Image post-processing techniques include elimination of background noise and signal from adsorbed nano-particle on the inner surfaces of the micro-model. In addition, a minimization of depth of focus technique demonstrates a capability of optically thin slice allowing us to measure depth wise velocity in 2.5D micro-model. The mean planar components of the particle velocity of the steady-state flow and particle concentration distributions were measured in three dimensions. Particle velocities range from 0.01 to 122 μm s−1 and concentrations from 2.18 × 103 to 1.79 × 104 particles mm−2. Depth-wise results show that mean velocity closer to the top wall is comparatively higher than bottom walls, because of higher planar porosity and smooth pathway for the nano-particles closer to the top wall. The three dimensional micro-model geometry reconstructed from the fluorescence data can be used to conduct numerical simulations of the flow in the as-tested micro-model for future comparisons to experimental results after incorporating particle transport and particle-wall interaction models.

Friction and Rheological Properties of Meso-Porous MCM-41/Unsaturated Polyester In Situ Composites

2014 ◽  
Vol 599-601 ◽  
pp. 18-21
Author(s):  
Shu Long Hu ◽  
Jian Lv ◽  
Feng Ying Lu ◽  
Hua Shan Liu ◽  
De Ming Zeng
Keyword(s):  
Wear Resistance ◽  
Rheological Properties ◽  
Cetyltrimethylammonium Bromide ◽  
Room Temperature ◽  
Polyester Resin ◽  
In Situ Polymerization ◽  
Unsaturated Polyester ◽  
Roller Milling ◽  
Mcm 41

In this paper, meso-porous MCM-41 was synthesized at room temperature using cationic surfactant cetyltrimethylammonium bromide (CTAB) as the template agent. Then MCM-41/unsatura-ted polyester resin (UPR) materials were prepared by in-situ polymerization with the meso-porous MCM-41. MCM-41/UPR in-situ composites were prepared by roller milling and molding processes. Effects of meso-porous MCM-41 on rheological properties and wear resistance of the MCM-41/UPR composites have been investigated. It is shown that MCM-41 has a diameter in range of 4-5 nm and the pores are highly ordered. MCM-41 can improve the rheological properties and wear resistance of the composites. When MCM-41 content is 2%, the mass abrasion loss is decreased by 37.4%.

Controllable Synthesis of Functional Polyaniline Nanotubes via a Complex Template

2015 ◽  
Vol 1120-1121 ◽  
pp. 220-224
Author(s):  
Ying Wang ◽  
Dong Hao Sun ◽  
Yan Feng Guo
Keyword(s):  
Electric Conductivity ◽  
Room Temperature ◽  
In Situ Polymerization ◽  
High Yield ◽  
Controllable Synthesis ◽  
Order Of Magnitude ◽  
Uv Visible ◽  
Acid Orange Ii ◽  
High Electric Conductivity

Functional Polyaniline (PANI) nanotubes are easily synthesized in high yield by an in situ polymerization using a fibrillar complex of acid orange II (AO II) and FeCl3as a template. During the process, the complex templates help direct the growth of fibrillar PANI on their surfaces, resulting in the formation of composite micro/nanofibers of PANI. After polymerization, by the post-treatment of removing templates in 1.0 M hydrochloric acid solution, PANI nanotubes with azo function and high electric conductivity of PANI are readily fabricated. The PANI nanotubes have about 150nm-300nm in diameter and several microns in length. At room temperature, the electric conductivity of PANI nanotubes is up to 10-1S/cm order of magnitude. The characterizations, including FTIR, UV-visible, XRD and TG, are presented.

Microwave Absorption Properties of BaFe12O19 Prepared in Different Temperature with Polyaniline Nanocomposites

2017 ◽  
Vol 1142 ◽  
pp. 211-215 ◽  
Author(s):  
Wang Jun Feng ◽  
Xing Zhao ◽  
Wen Qian Zheng ◽  
Jun Tao Gang ◽  
Yue Cao ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Reflection Loss ◽  
In Situ Polymerization ◽  
Sol Gel ◽  
Ftir Spectra ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
Result Show ◽  
Absorbing Material

The BaFe12O19 nanoparticles was prepared by sol-gel method in different temperature (750°C,850°Cand 950°C), and then BaFe12O19/polyaniline nanocomposites was synthesized by in situ polymerization. The XRD, FTIR spectra, SEM and vector network analyzer were used to analyze the "" chemical component, morphology and microwave absorption property of the nanocomposites. The result show that BaFe12O19 can be generated at 750°C without any impurity ,and its size increased with increase of calcination temperature.BaFe12O19 nanoparticle was coated with polyaniline partially, and we can get it have interaction with polyaniline through FTIR spectra. While the ferrite calcined at 850°C,the thickness of the absorbing material is 4.5mm,the nanocomposites have the largest reflection loss of-17.6 dB at 6 GHz,and its reflection loss values less than−10 dB in the range of 5-7.4GHz.

scholarly journals The Use of Le Bail Method to Analyze the Semicrystalline Pattern of a Nanocomposite Based on Polyaniline Emeraldine-Salt Form andα-Al2O3

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Edgar A. Sanches ◽  
Adriano de S. Carolino ◽  
Amanda L. dos Santos ◽  
Edson G. R. Fernandes ◽  
Daniela M. Trichês ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Room Temperature ◽  
Structural Characteristics ◽  
Pure Pani ◽  
Emeraldine Salt ◽  
Salt Form ◽  
Absorption Bands ◽  
Physical Deposition ◽  
Average Size

Ceramic nanocomposites constituted by a matrix ofα-Al2O3microparticles reinforced by polyaniline emeraldine-salt form (PANI-ES) nanoparticles were prepared byin situpolymerization and characterized structural and morphologically. Peaks related to both materials were observed through XRD technique: PANI-ES presented peaks at2θ= 8.9, 14.9, 20.8, 25.3, 27.1, and 30.0° and inα-Al2O3phase peaks were found at2θ= 25.6, 35.2, 37.9, 43.5, 52.6, 57.6, and 68.1°. Nanocomposite crystallinity percentage was estimated around 70%. SEM showed a polymerization of PANI-ES over alumina plates. By Le Bail method it was observed that PANI-ES andα-Al2O3have crystallite average size around, respectively, 41 and 250 Å. By FTIR analysis characteristic absorption bands of both materials were identified. Additional bands indicating new chemical bonds were not observed, suggesting that nanocomposite was formed by physical deposition. Nanocomposite DC electrical conductivity was found around 0.24 S/cm (against1.84×10-4 S/cm for pure PANI-ES), showing an increase of about 1,300 times compared to the pure PANI-ES at room temperature. Thus, this paper showed that both materials have kept its original structural characteristics and exhibited high electrical conductivity when combined in nanocomposite form.

IN SITU SYNTHESIS, CHARACTERIZATION AND FREQUENCY DEPENDENT AC CONDUCTIVITY OF POLYANILINE/CoFe2O4 NANOCOMPOSITES

2011 ◽  
Vol 01 (03) ◽  
pp. 357-362 ◽  
Author(s):  
G. D. PRASANNA ◽  
H. S. JAYANNA
Keyword(s):  
Ac Conductivity ◽  
Room Temperature ◽  
In Situ Polymerization ◽  
In Situ Synthesis ◽  
Electron Micrograph ◽  
Frequency Range ◽  
X Ray Diffraction ◽  
Scanning Electron Micrograph ◽  
X Ray

The polyaniline (PANI)/ CoFe2O4 nanocomposites were prepared by an In Situ polymerization of aniline in an aqueous solution. The composites were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrum,thermogravimetric analysis (TGA) and scanning electron micrograph (SEM). The AC conductivity and dielectric properties of these composites were investigated in the frequency range 1 kHz–10 MHz at room temperature. The AC conductivity was found to be constant up to 1 MHz and thereafter it increases steeply and it was observed maximum for the PANI with 60 wt% of CoFe2O4 nanocomposite. At lower frequencies the values of dielectric constant is maximum for pure CoFe2O4 nanoparticles.

Preparation of Polyaniline @ Polypyrrole Conductive Composite via In Situ Polymerization

2013 ◽  
Vol 562-565 ◽  
pp. 1137-1142
Author(s):  
Hui Xia Feng ◽  
Bing Wang ◽  
Lin Tan ◽  
Na Li Chen
Keyword(s):  
Electron Microscopy ◽  
Electrical Conductivity ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
In Situ Polymerization ◽  
Conductive Composite ◽  
The Core ◽  
Novel Method ◽  
Scanning Electron

We prepared the polyaniline@polypyrrole (PAn@PPy) conductive composite by a novel method. The struction like Pre-prepared PAn as the core and PPy as the shell for the composite has been prepared by in-situ polymerization. The PAn@PPy conductive composite presents an electrical conductivity of 12.5 S/cm, which is much higher than pure PAn. The synthesized polymer composites are characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Thermogravimetric analysis (TG). The results indicated that PPy successfully grafted on PAn and the heat resistance of nanocomposite is remarkably increased.

Sign in / Sign up

Export Citation Format

Share Document