scholarly journals The March 25, 2020 MW 7.5 Paramushir earthquake

2021 ◽  
Vol 5 (2) ◽  
pp. 113-127
Author(s):  
A.S. Prytkov ◽  
◽  
N.F. Vasilenko ◽  
Keyword(s):  
Subduction Zone ◽  
Seismic Event ◽  
Process Development ◽  
Source Parameters ◽  
Lithospheric Plate ◽  
Outer Rise ◽  
The North ◽  
Rupture Plane ◽  
Earthquake Source Parameters ◽  
Tectonic Position

The strong earthquake with moment magnitude Mw = 7.5 occurred on March 25, 2020, in the North Kurils to the southeast of the Paramushir Island. The hypocenter of the earthquake was located under the oceanic rise of deep-sea trench in the subducting Pacific lithospheric plate. This earthquake has been the strongest seismic event since 1900 for an area about 800 km long of the outer rise of the trench. It also was the strongest earthquake for the 300-kilometer long area of the Kuril-Kamchatka subduction zone adjacent to the epicenter. The article summarizes the data on the Paramushir earthquake. Tectonic position of the earthquake, source parameters, features of the aftershock process development, as well as coseismic displacement of the nearest continuous GNSS station are considered. The performed analysis did not allow us to clearly determine the rupture plane in the source. Nevertheless, the study of the features of the outer-rise earthquake is a matter of scientific interest, since the stress state of the bending area of the subducting Pacific lithospheric plate reflects the interplate interaction in the subduction zone.

The plate contact geometry investigation based on earthquake source parameters at the Burma arc subduction zone

2013 ◽  
Vol 56 (5) ◽  
pp. 806-817 ◽  
Author(s):  
LangPing Zhang ◽  
ZhiGang Shao ◽  
HongSheng Ma ◽  
XingZhou Wang ◽  
ZhiHai Li
Keyword(s):  
Subduction Zone ◽  
Source Parameters ◽  
Contact Geometry ◽  
Earthquake Source ◽  
Earthquake Source Parameters

Tsunami Hazard Assessment Along Chinese Coast Using Scaling Relations Developed for Tsunami Prediction

2021 ◽  
Author(s):  
Jiashen Guan ◽  
Chao An
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Source Parameters ◽  
Earthquake Magnitude ◽  
Tsunami Hazard ◽  
Tsunami Source ◽  
Scaling Relations ◽  
Tsunami Hazards ◽  
Earthquake Source Parameters ◽  
Chinese Coast

Potential tsunamis in the western Pacific Ocean pose great threats to the Chinese coastal areas. Among all possible tsunami source regions, the Manila subduction zone draws the most attention and there have been many research works on the tsunami hazards in the South China Sea. In this study, we evaluate the tsunami hazard along the Chinese coast by investigating more potential sources, including the subduction zones of Manila, Ryukyu, Nankai, Izu–Bonin and Mariana. Two tsunami scenarios are considered for each subduction zone, a worst scenario of earthquake magnitude 9.0 and a scenario of largest earthquake magnitude known in history in this zone. Earthquake source parameters are calculated using scaling relations that have been shown to be suitable for tsunami generation. Our results show that for the Chinese coast, tsunami hazards from the Manila and Ryukyu subduction zones are severe in the worst scenarios, and tsunami hazards from the Nankai, Izu–Bonin and Mariana subduction zones are mild. Using the largest earthquake magnitude in history, tsunami hazards from all the investigated subduction zones are almost negligible. Through a sensitivity test on earthquake magnitude, we find that earthquakes of magnitude of 8.5 or larger in the Manila and Ryukyu subduction zones cause severe tsunami hazard along the Chinese coast with wave amplitude over 2 m.

scholarly journals Fault source investigation of the 6 December 2016 MwMw 6.5 Pidie Jaya, Indonesia, earthquake based on GPS and its implications of the geological survey result

2020 ◽  
Vol 14 (4) ◽  
pp. 405-412
Author(s):  
Endra Gunawan ◽  
Takuya Nishimura ◽  
Susilo Susilo ◽  
Sri Widiyantoro ◽  
Nanang T. Puspito ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Source Parameters ◽  
Secondary Effects ◽  
Near Surface ◽  
Morphological Attributes ◽  
Ground Shaking ◽  
The North ◽  
Coulomb Failure ◽  
North And South ◽  
Fault Source

AbstractOn 6 December 2016 at 22:03 UTC, a devastating magnitude 6-class strike-slip earthquake occurred along an unidentified and unmapped fault in Pidie Jaya, northern Sumatra. We analysed the possible fault using continuous Global Positioning System (GPS) observation available in the region. In our investigation, we searched for the fault source parameters of the north- and south-dipping left-lateral faults and the west- and east-dipping right-lateral faults. We identified that the fault responsible for the earthquake was located offshore, with a southwest-northeast direction. We also computed the Coulomb failure stress and compared the result with the distribution of the aftershocks. In this study, we demonstrated that the result of the geological field survey conducted soon after the mainshock was attributed to the secondary effects of ground shaking and near-surface deformation, and not surface faulting. The newly identified offshore fault proposed by this study calls for further investigation of the corresponding submarine morphological attributes in this particular region.

Strain to Ground Motion Conversion of DAS Data for Earthquake Magnitude and Stress Drop Determination

2021 ◽  
Author(s):  
Itzhak Lior ◽  
Anthony Sladen ◽  
Diego Mercerat ◽  
Jean-Paul Ampuero ◽  
Diane Rivet ◽  
...  
Keyword(s):  
Early Warning ◽  
Stress Drop ◽  
Source Parameters ◽  
Simulated Data ◽  
Earthquake Early Warning ◽  
Body Waves ◽  
Ocean Bottom ◽  
Correlated Noise ◽  
S Wave ◽  
Earthquake Source Parameters

<p>The use of Distributed Acoustic Sensing (DAS) presents unique advantages for earthquake monitoring compared with standard seismic networks: spatially dense measurements adapted for harsh environments and designed for remote operation. However, the ability to determine earthquake source parameters using DAS is yet to be fully established. In particular, resolving the magnitude and stress drop, is a fundamental objective for seismic monitoring and earthquake early warning. To apply existing methods for source parameter estimation to DAS signals, they must first be converted from strain to ground motions. This conversion can be achieved using the waves’ apparent phase velocity, which varies for different seismic phases ranging from fast body-waves to slow surface- and scattered-waves. To facilitate this conversion and improve its reliability, an algorithm for slowness determination is presented, based on the local slant-stack transform. This approach yields a unique slowness value at each time instance of a DAS time-series. The ability to convert strain-rate signals to ground accelerations is validated using simulated data and applied to several earthquakes recorded by dark fibers of three ocean-bottom telecommunication cables in the Mediterranean Sea. The conversion emphasizes fast body-waves compared to slow scattered-waves and ambient noise, and is robust even in the presence of correlated noise and varying wave propagation directions. Good agreement is found between source parameters determined using converted DAS waveforms and on-land seismometers for both P- and S-wave records. The demonstrated ability to resolve source parameters using P-waves on horizontal ocean-bottom fibers is key for the implementation of DAS based earthquake early warning, which will significantly improve hazard mitigation capabilities for offshore and tsunami earthquakes.</p>

Upper-plate structural controls on the segmentation of the Kefalonia Fault (Ionian Sea, Greece)

2021 ◽  
Author(s):  
Emmanuel Skourtsos ◽  
Haralambos Kranis ◽  
Spyridon Mavroulis ◽  
Efthimios Lekkas
Keyword(s):  
Eastern Mediterranean ◽  
Source Parameters ◽  
Plate Boundary ◽  
Temporal Distribution ◽  
Western Coast ◽  
African Plate ◽  
Plate Structure ◽  
The North ◽  
Macroseismic Effects ◽  
Spatio Temporal

<p>The NNE-SSW, right-lateral Kefalonia Transform Fault (KTF) marks the western termination of the subducting Hellenic slab, which is a part of the oceanic remnant of the African plate. The inception of the KTF, described as a STEP fault, is placed in the Pliocene. KTF is considered to be the most active earthquake source in the Eastern Mediterranean. During the last two decades, four significant earthquakes (M>6.0) have been associated with the KTF. These events are attributed to the reactivation of different segments of the KTF, which are (from North to South) the North Lefkada, South Lefkada, Fiskardo, Paliki and Zakynthos segments: the North Lefkada segment ruptured in the 2003 earthquake, the 2014 Kefalonia events are associated with the Paliki segment and the 2015 Lefkada earthquake with the South Lefkada (and possibly the Fiskardo) segments.</p><p>The upper plate structure in the islands of Lefkada and Kefalonia is characterized by the Ionian Unit, thrusted over the Paxi (or Pre-Apulian) Unit. The Ionian Thrust, which brings the Ionian over the Paxi Unit, is a main upper-plate NNW-SSE, NE-dipping structure. It runs through the island of Lefkada, to be mapped onshore again at the western coast of Ithaki and at SE Kefalonia. Two other major thrusts are mapped on this island: the Aenos thrust, which has a WNW-ESE strike at the southern part of the island and gradually curves towards NNW-SSE in the west and the Kalo Fault in the northern part. These Pliocene (and still active) structures developed during the late-most stages of thrusting in the Hellenides, strike obliquely to the KTF and appear to abut against it.</p><p>We suggest that these thrusts control not only the deformation within the upper plate, but also the earthquake segmentation of the KTF. This suggestion is corroborated by the spatio-temporal distribution and source parameters of the recent, well-documented earthquake events and by the macroseismic effects of these earthquakes. The abutment of the Ionian thrust against the KTF marks the southern termination of the Lefkada earthquake segment, which ruptured in the 2003 earthquake, while the Aenos, (or the Kalo) thrust mark the southern end of the Fiskardo segment. The spatial distribution of the Earthquake Environmental Effects related to the four significant events in the last 20 years displays a good correlation with our interpretation: most of the 2003 macroseismic effects are located in the northern part of Lefkada, which belongs to the upper block of the Ionian thrust; similarly, the effects of the 2014 earthquakes of Kefalonia are distributed mainly in the Paliki Peninsula and the southern part of the island that belong to the footwall of the Aenos thrust and the 2015 effects are found in SW Lefkada, which is part of the footwall of the Ionian thrust.</p><p>We suggest that correlation between upper-plate structure and plate boundary faulting can provide insights in the understanding of faulting pattern in convergent settings, therefore contributing to earthquake management plans.</p>

Inversion of regional surface-wave spectra for source parameters of aftershocks from the 1992 Petrolia earthquake sequence

1995 ◽  
Vol 85 (3) ◽  
pp. 705-715
Author(s):  
Mark Andrew Tinker ◽  
Susan L. Beck
Keyword(s):  
Surface Wave ◽  
Focal Mechanism ◽  
Source Parameters ◽  
Strike Slip ◽  
Earthquake Sequence ◽  
Fault System ◽  
Accretionary Wedge ◽  
Wave Spectra ◽  
The North ◽  
Gorda Plate

Abstract Regional distance surface waves are used to study the source parameters for moderate-size aftershocks of the 25 April 1992 Petrolia earthquake sequence. The Cascadia subduction zone had been relatively seismically inactive until the onset of the mainshock (Ms = 7.1). This underthrusting event establishes that the southern end of the North America-Gorda plate boundary is seismogenic. It was followed by two separate and distinct large aftershocks (Ms = 6.6 for both) occurring at 07:41 and 11:41 on 26 April, as well as thousands of other small aftershocks. Many of the aftershocks following the second large aftershock had magnitudes in the range of 4.0 to 5.5. Using intermediate-period surface-wave spectra, we estimate focal mechanisms and depths for one foreshock and six of the larger aftershocks (Md = 4.0 to 5.5). These seven events can be separated into two groups based on temporal, spatial, and principal stress orientation characteristics. Within two days of the mainshock, four aftershocks (Md = 4 to 5) occurred within 4 hr of each other that were located offshore and along the Mendocino fault. These four aftershocks comprise one group. They are shallow, thrust events with northeast-trending P axes. We interpret these aftershocks to represent internal compression within the North American accretionary prism as a result of Gorda plate subduction. The other three events compose the second group. The shallow, strike-slip mechanism determined for the 8 March foreshock (Md = 5.3) may reflect the right-lateral strike-slip motion associated with the interaction between the northern terminus of the San Andreas fault system and the eastern terminus of the Mendocino fault. The 10 May aftershock (Md = 4.1), located on the coast and north of the Mendocino triple junction, has a thrust fault focal mechanism. This event is shallow and probably occurred within the accretionary wedge on an imbricate thrust. A normal fault focal mechanism is obtained for the 5 June aftershock (Md = 4.8), located offshore and just north of the Mendocino fault. This event exhibits a large component of normal motion, representing internal failure within a rebounding accretionary wedge. These two aftershocks and the foreshock have dissimilar locations in space and time, but they do share a north-northwest oriented P axis.

Seismic doublets and a complex seismic sequence controlled by the rotation of the Juan Fernández microplate

2021 ◽  
Author(s):  
Simone Cesca ◽  
Carla Valenzuela Malebrán ◽  
José Ángel López-Comino ◽  
Timothy Davis ◽  
Carlos Tassara ◽  
...  
Keyword(s):  
Source Parameters ◽  
Strike Slip ◽  
Focal Mechanisms ◽  
Joint Analysis ◽  
Seismic Sequence ◽  
Local Data ◽  
Study Region ◽  
Coulomb Stress Changes ◽  
Earthquake Source Parameters ◽  
Stress Changes

<p> A complex seismic sequence took place in 2014 at the Juan Fernández microplate, a small microplate located between Pacific, Nazca and Antarctica plates. Despite the remoteness of the study region and the lack of local data, we were able to resolve earthquake source parameters and to reconstruct the complex seismic sequence, by using modern waveform-based seismological techniques. The sequence started with an exceptional Mw 7.1-6.7 thrust – strike slip earthquake doublet, the first subevent being the largest earthquake ever recorded in the region and one of the few rare thrust earthquakes in a region otherwise characterized by normal faulting and strike slip earthquakes. The joint analysis of seismicity and focal mechanisms suggest the activation of E-W and NE-SW faults or of an internal curved pseudofault, which is formed in response to the microplate rotation, with alternation of thrust and strike-slip earthquakes. Seismicity migrated Northward in its final phase, towards the microplate edge, where a second doublet with uneven focal mechanisms occurred. The sequence rupture kinematics is well explained by Coulomb stress changes imparted by the first subevent. Our analysis show that compressional stresses, which have been mapped at the northern boundary of the microplate, but never accompanied by large thrust earthquakes, can be accommodated by the rare occurrence of large, impulsive, shallow thrust earthquakes, with a considerable tsunamigenic potential.</p>

scholarly journals Earthquake source parameters that display the first digit phenomenon

2015 ◽  
Vol 22 (5) ◽  
pp. 625-632
Author(s):  
P. A. Toledo ◽  
S. R. Riquelme ◽  
J. A. Campos
Keyword(s):  
Seismic Moment ◽  
Waiting Times ◽  
Source Parameters ◽  
Tohoku Earthquake ◽  
Earthquake Source ◽  
Coseismic Slip ◽  
Self Organized ◽  
Earthquake Source Parameters ◽  
Self Organized Criticality

Abstract. We study the main parameters of earthquakes from the perspective of the first digit phenomenon: the nonuniform probability of the lower first digit different from 0 compared to the higher ones. We found that source parameters like coseismic slip distributions at the fault and coseismic inland displacements show first digit anomaly. We also found the tsunami runups measured after the earthquake to display the phenomenon. Other parameters found to obey first digit anomaly are related to the aftershocks: we show that seismic moment liberation and seismic waiting times also display an anomaly. We explain this finding by invoking a self-organized criticality framework. We demonstrate that critically organized automata show the first digit signature and we interpret this as a possible explanation of the behavior of the studied parameters of the Tohoku earthquake.

Sign in / Sign up

Export Citation Format

Share Document