scholarly journals MENINGKATKAN KEAKTIFAN DAN HASIL BELAJAR SISTEM KELISTRIKAN KENDARAAN RINGAN DENGAN PENERAPAN MODEL PEMBELAJARAN DISCOVERY LEARING

TAMAN VOKASI ◽  
2018 ◽  
Vol 6 (1) ◽  
pp. 108
Author(s):  
Agung Purwanto ◽  
Rabiman Rabiman
Keyword(s):  
High School ◽  
Learning Outcomes ◽  
Action Planning ◽  
Discovery Learning ◽  
Average Score ◽  
Vocational High School ◽  
Electrical System ◽  
Vehicle Engineering ◽  
System Data ◽  
Light Vehicle

Penelitian bertujuan untuk: (1) meningkatan keaktifan belajar siswa; dan (2) meningkatkan hasil belajar kelistrikan kendaraan ringan siswa kelas XI TKR. Penelitian ini merupakan Penelitian Tindakan Kelas yang terdiri dari 3 siklus, masing-masing siklus terdiri dari empat tahapan yaitu: (1) Perencanaan tindakan; (2) Pelaksanaan tindakan; (3) Observasi; dan (4) Refleksi. Subjek penelitian adalah siswa kelas XI TKR 1 SMK Giripuro Sumpiuh yang berjumlah 42 siswa, objek penelitian adalah keaktifan dan hasil belajar sistem kelistrikan kendaraan ringan. Teknik analisis data menggunakan analisis kuantitatif. Hasil penelitian menunjukan bahwa penerapan model pembelajaran discovery learning dapat meningkatkan keaktifan dan hasil belajar kelistrikan kendaraan ringan siswa kelas XI TKR 1 SMK Giripuro Sumpiuh. Peningkatan keaktifan belajar dapat dilihat dari nilai rata-rata keaktifan siklus I sebesar 52,38%, siklus II sebesar 64,29%, dan 74,79% pada siklus 3, persentase keaktifan siklus I ke siklus II meningkat sebesar 11,19%, dan siklus II ke siklus III meningkat sebesar 10,50%. Peningkatan hasil belajar dilihat dari nilai ratarata siklus I sebesar 47,62%, siklus II sebesar 64,29%, dan 88,10% pada siklus III, persentase peningkatan hasil belajar siswa dari siklus I ke siklus II sebesar 16,67%, dan siklus II ke siklus III meningkat sebesar 23,81%. This study aims to: (1) improve the students’ learning activeness; and (2) increase the students’ learning outcomes of light vehicles electricity system of grade XI students of Light Vehicle Engineering. This study is a Classroom Action Research/Penelitian Tindakan Kelas consisting of 3 cycles in which each cycle comprises four stages: (1) Action planning; (2) Implementation of action; (3) Observation; and (4) Reflection. The subjects of the study were 42 students of grade XI of Light Vehicle Engineering (TKR) 1 class in Giripuro Sumpiuh Vocational High School. Meanwhile, the research object was the students’ activeness and learning outcomes of the light vehicles electrical system. Data analysis technique used was quantitative analysis. The result shows that the application of discovery learning model can improve the students’ activeness and learning outcomes of light vehicles electrical system of grade XI students of Light Vehicle Engineering (TKR) 1 class in Giripuro Sumpiuh Vocational High School. The improvement of the learning activeness can be seen from the average of the activeness of cycle I of 52.38%, cycle II of 64.29%, and cycle III of 74.79%, with the percentage of activeness in cycle I to cycle II increases by 11.19% and in cycle II to cycle III increases by 10.50%. The increase of learning outcomes is seen from the average score of cycle I of 47.62%, cycle II of 64.29%, and cycle III of 88.10%, with the percentage of the increase in students’ learning outcomes from cycle I to cycle II increases by 16.67%, and cycle II to cycle III increased by 23.81%. 

scholarly journals UPAYA MENINGKATKAN AKTIVITAS DAN HASIL BELAJAR SISWA DENGAN MEDIA AUDIO VISUAL PADA MATA PELAJARAN SISTEM REM KELAS XI SMK ISLAM SALAK BROJO PEKALONGAN TAHUN AJARAN 2014/2015

TAMAN VOKASI ◽  
2016 ◽  
Vol 4 (2) ◽  
pp. 206
Author(s):  
Muh Fredy Hermawan ◽  
Tarto Sentono
Keyword(s):  
High School ◽  
Student Learning ◽  
Learning Outcomes ◽  
Research Result ◽  
Student Learning Outcomes ◽  
Brake System ◽  
Vocational High School ◽  
Vehicle Engineering ◽  
Visual Method ◽  
Average Value

The purpose of this research to imporove the activity and student learning outcomes of class XI Islam Salak Brojo Pekalongan Vocational High School by audio-visual menthod on the brake system subjects.This education is clasroom action researsh that been conducted in Islam Salak Brojo Pekalongan.Vocational High School in the academic year of 2014/2015. The subject in this research is a class XI student of Light Vehicle Engineering Islam Salak Brojo Pekalongan Vocational High School that amounted to 26 student. The data collection techniques used observation and tests are divided into pre-test and post test. The data were anilyzed using descriptive statistics.The research result showed that the application of audio-visual method on the brake system subjects can improve activity and student learning outcomes class XI Islam Salak Brojo Pekalongan Vocational High Shool. The result can be seen in the successful development of the I cycle, the average value of learning activities amounted to 53,84 increased in the II cicle to 56,34 then on the III cycle increased to 59,42. On the learning outcomes of I cycle on average reached 5,11 increased in the II cycle to 6,51 then on the III cycle increased to 18,32. Therefore can be concluded that audio-visual method can increase the activity and student learning outcomes on the  break system subjects of class XI student of Islam Salak Brojo Pekalongan Vocational High School.

scholarly journals Improving Creative Thinking Skills through Discovery Learning Model in Vocational High Schools

2019 ◽  
Vol 25 (1) ◽  
pp. 62-67
Author(s):  
Luthfiyah Nurlaela ◽  
Suparji Suparji ◽  
IGP Asto Buditjahjanto ◽  
Any Sutiadiningsih ◽  
Febri Lukitasari
Keyword(s):  
High School ◽  
High School Students ◽  
Learning Outcomes ◽  
Creative Thinking ◽  
Lesson Plan ◽  
Food Service ◽  
Thinking Skills ◽  
Learning Model ◽  
Discovery Learning ◽  
Vocational High School

Several studies indicated the low creative thinking skills of vocational high school students. The objective of this study is to describe the application of discovery learning models to improve the ability of the teachers to manage learning, student activities during the learning process, the student learning outcomes in terms of creative thinking skills, and the student responses to the learning activities. The research subjects were 35 students from the study program of Catering Food Service in a Public Vocational High School, SMK N 6 Surabaya. The lesson plan included the syllabus, learning implementation plans, student activity sheets, and assessment. Meanwhile, the data collection instruments included tests, observations, and questionnaires. The data were analyzed using descriptive statistics and t-test. The results showed that discovery learning model could improve the teacher's ability to manage the learning, students’ activities, learning outcomes of creative thinking skills, and students’ responses.

scholarly journals The Development of News Text-Based Problems Teaching Materials in 12th Grade Students of Vocational High School at TR Sinar Husni of 2019/2020

2020 ◽  
Vol 3 (1) ◽  
pp. 293-305
Author(s):  
Bobby Pratama Putra ◽  
Khairil Ansari ◽  
Isda Pramuniati
Keyword(s):  
High School ◽  
Learning Outcomes ◽  
Average Score ◽  
Vocational High School ◽  
Teaching Materials ◽  
Sampling System ◽  
Module Design ◽  
12Th Grade ◽  
Module Size ◽  
Cover Design

This research aims to develop the material teaching of News text based Problem in 12th grade Students of Vocational High School at TR Sinar Husni. The methods used is quantitative method. It also use random sampling system. The product that was developed was in the form of a problem-based module on writing news text material entitled "News Text -Based Problem" for 12th grade students of Vocational High School at TR Sinar Husni qualified and suitable for use as individual teaching materials based on the assessment of material experts and learning design experts. The feasibility of teaching materials by material experts included in the criteria is excellent with aspects of the feasibility of the contents of 90.1%, the feasibility of the presentation of 90.3%, and the feasibility of aspects of the language of 93.2%. The feasibility of the design by the design experts in the criteria is excellent with an average score of 89.5%, the module size aspect with an average score of 89%, the module cover design (cover) with an average score of 91.6%, and the module design with an average score of 87.5%. The student news text test results after using the news text module increased by 9.47, with an average pretest learning outcomes or before using the module of 76.07 while the posttest learning outcomes or after using the module amounted to 85.54.

scholarly journals Penerapan discovery learning untuk meningkatkan keaktifan dan hasil belajar materi program linear

2021 ◽  
Vol 1 (1) ◽  
pp. 40-46
Author(s):  
Edy Suwanto
Keyword(s):  
Student Learning ◽  
Learning Outcomes ◽  
Initial Conditions ◽  
Action Planning ◽  
Discovery Learning ◽  
Linear Program ◽  
Learning Activity ◽  
Average Score ◽  
Program Material ◽  
Average Value

This study aims to determine the increase in student activity and learning outcomes in Linear Program material through the application of discovery learning learning models. This research was conducted at SMA Negeri 1 Karangrayung, Grobogan Regency, Central Java Province. This research method uses classroom action research with two cycles. Each cycle consists of four stages which include action planning, action implementation, observation of action results, and reflection of action results. The results showed that the average score of student learning activity in the initial conditions was 27.67 (=55.33%) then in the first cycle was 29.83 (=59.67%) and in the second cycle was 38.33 (= 76.67%. While the average value of student learning outcomes in the initial conditions was 65.87 then in the first cycle was 68.77 and in the second cycle was 75.50. The percentage of students' learning completeness in the initial condition is 10.00%, then in the first cycle it is 46.67% and in the second cycle it is 96.67%. Based on the results of the study, it can be concluded that the discovery learning model can increase the activeness and learning outcomes of students in the Linear Program material.

scholarly journals Integrated work-based learning (I-WBL) model development in light vehicle engineering competency of vocational high school

2018 ◽  
Vol 8 (1) ◽  
pp. 1
Author(s):  
S Suyitno ◽  
P. Pardjono
Keyword(s):  
Classroom Practice ◽  
Model Development ◽  
Vocational School ◽  
Average Score ◽  
Development Research ◽  
Vocational High School ◽  
Vehicle Engineering ◽  
School Students ◽  
Group Design ◽  
Light Vehicle

This research is to (1) analyze the implementation of new field project; (2) develop conceptual model of WBL integrated to industry; (3) test the validity of WBL integrated; (4) test the effectiveness of integrated WBL. This is educational and development research using randomized pretest-posttest and controlled group design. The population was all vocational school students.  The research was conducted from March to December 2016. Data were collected by listing, using observation sheet, interviewing guidline and documenting.   Validating was done by some experts.  The data were analyzed in descriptive and multivariate Analysis of Variance by SPSS.17. The result shows that (1) the implementation field project has some weaknesses;  (a) the schools are less prepared to plan the program, place and MoU; (b) schools never formally invite outside; (c) not all schools have a guidance to do a field project and schools only measure student’s skill aspect after doing field project; (2) developing model through philosophical level, theoritical  level, methodological level, dan classroom practice; (3) after validation of the guidance book by 12 experts, it shows the average score up to  4;  (4) The group using WBL is more effective than that using field project in increasing the student’.

scholarly journals Factors Affecting the Interests of Junior High School Students to Continue to High School of Automotive Engineering

2019 ◽  
Vol 8 (4) ◽  
pp. 2118-2122
Keyword(s):  
High School ◽  
High School Students ◽  
Mass Media ◽  
Junior High School ◽  
Significant Positive Effect ◽  
Vocational High School ◽  
Vehicle Engineering ◽  
Individual Character ◽  
Light Vehicle ◽  
Positive Effect

The purpose of this study is to find out how much interest students have in choosing to continue their studies at the vocational high school of light vehicle engineering expertise in bantul regency, seen from (1) individual students; (2) parents' encouragement; (3) environment; (4) mass media information. The study population was all students of the vocational high school of light vehicle expertise in bantul regency. Sampling was carried out using two stages, namely cluster sampling and random sampling using the formula krejcie and morgan with an error rate of 5%, a sample of 221 students were taken from six vocational high schools in bantul district. Data collection is determined using a questionnaire. Data analysis techniques include simple regression analysis and multiple regression. The results showed that: (1) there was a significant positive effect on the individual character of students on the students' interest in choosing to continue their studies at the vocational high vocational light vehicle engineering package in bantul by 41.6%; (2) there is a significant positive effect of parents 'encouragement on students' interest in choosing to continue their studies to a high vocational school of light vehicle engineering expertise in bantul by 48.8%; (3) there is a significant positive effect on the students 'environment on the students' interest in choosing to continue their studies at the vocational high school of light vehicle engineering expertise in bantul by 46.6%; (4) there is a significant positive effect of mass media information on students' interest in choosing to continue their studies at the vocational high school of light vehicle engineering expertise in bantul by 40.2%

scholarly journals THE DEVELOPMENT OF INDONESIAN NATIONAL QUALIFICATIONS FRAMEWORK (INQF) - BASED ELECTRICAL AND ELECTRONIC SUBJECT AT VOCATIONAL HIGH SCHOOL KAL-1 SURABAYA

2019 ◽  
Vol 7 (3) ◽  
pp. 315-322
Author(s):  
Karno Setyo Budi ◽  
Supari Muslim
Keyword(s):  
High School ◽  
Instructional Design ◽  
Learning Outcomes ◽  
National Curriculum ◽  
Development Stage ◽  
Average Score ◽  
Vocational High School ◽  
Curriculum Framework ◽  
The Republic

Purpose of Study: Ineffective implementation of curriculum 2013 and low quality of vocational school graduates underlay the present study. The Presidential Regulation of the Republic of Indonesian number 8 year 2012 stipulates that the implementation of Indonesian National Curriculum Framework-based on curriculum 2013 will improve the quality of vocational high school graduates at level 2 and their learning outcomes, including cognitive, affective, and psychomotor domains. The development of the Indonesian National Curriculum framework-based curriculum 2013 was an activity in generating an educational curriculum at an institutional level which aligns the needs of business and industry. The design of this study was the 4-D models of Thiagarajan, namely 1) the definition; 2) design; 3) development; and 4) deployment, but this was only conducted up to the development stage. Methodology: Regarding the background, the research questions were formulated as follows: (1) how is the validity, practicality, and effectiveness of the instructional design of the Basic Electrical and Electronic subject?; (2) how is the students’ response to the instructional design of the Basic Electrical and Electronic Subject?; and (3) how are the results of students’ learning outcomes of Basic Electrical and Electronic Subject?. Results: This study aimed to find out: (1) the level of validity, practicality, and effectiveness of the instructional design of the Basic Electrical and Electronic Subject; (2) the students’ response of the instructional design of the Basic Electrical and Electronic Subject; and (3) the students’ learning outcomes of the Basic Electrical and Electronic Subject. Implications/Applications: The conclusion of this research is: 1) the average score on the validity of the instructional design was 3.722 (very high), the average  score on its feasibility was 3.72 (very practical), while the average score of its effectiveness was 71.87 (effective); 2) the students’ responses to the instructional design were 92%, which was satisfactory; and 3) the average score of the students’ learning results was 85, over the minimum score determined, with the learning mastery of 100%.

scholarly journals CORRELATION AUTOMOTIVE ACHIEVEMENT LEARNING AND DISCIPLINARY OF LEARNING WITH LEARNING READINESS WITH THE PRACTICE OF INDUSTRIAL ENGINEERING CLASS XI LIGHT VEHICLE VOCATIONAL HIGH SCHOOL MA'ARIF NANGGULAN KULON PROGO

TAMAN VOKASI ◽  
2014 ◽  
Vol 2 (2) ◽  
Author(s):  
Sri Aji Gularko ◽  
Tarto Sentono
Keyword(s):  
High School ◽  
Vocational School ◽  
Work Practices ◽  
Vocational High School ◽  
Vehicle Engineering ◽  
Learning Achievement ◽  
Light Vehicle ◽  
Vocational Learning ◽  
Academic Year ◽  
Year 2013

The purpose of the study (1) To determine the correlation between the learning achievement of vocational automotive industry working practices with readiness class XI student of Light Vehicle Technical Vocational High School Ma'Arif Nanggulan Kulon Progo Academic Year 2013/2014; (2) To determine the correlation between the discipline of learning the practice of industrial work readiness class XI student of Light Vehicle Technical Vocational High School Ma'Arif Nanggulan Kulon Progo Academic Year 2013/2014; (3) To determine the correlation between learning achievement and discipline automotive vocational learning with practical work readiness class XI student industry Light Vehicle Technical Vocational High School Ma'Arif Nanggulan Kulon Progo Academic Year 2013/2014.This research was conducted at the Vocational School Ma'Arif Nanggulan Kulon Progo academic year 2013/2014 in the second semester. The population in this study were all students of class XI Light Vehicle Engineering, amounting to 108 students and this study using simple random sampling with harry king nomogram to obtain samples and 88 respondents were randomly selected by lottery. This research is correlational and ex post facto categorized. Questionnaire data collection techniques and documentation of learning achievement. The validity of the items were obtained from the product moment correlation. About the reliability of the formula obtained by alpha and declared reliable. Before the data were analyzed first tested the normality test is prerequisite analysis, linearity test, and test intercorrelations. Analysis using a simple correlation analysis and multiple correlation analysis.Based on the analysis of the results obtained the following results: (1) There is a positive and significant correlation between automotive vocational learning achievement (X1) with the readiness of the industry work practices (Y) class XI student Lightweight Vehicle Engineering Vocational School Ma'Arif Nanggulan Kulon Progo Year Doctrine 2013/2014; (2) There is a positive and significant correlation between the discipline of learning (X2) the readiness of the industry work practices (Y) class XI student Lightweight Vehicle Engineering Vocational School Ma'Arif Nanggulan Kulon Progo Academic Year 2013/2014;; (3) There is a positive and significant correlation learning achievement of vocational automotive (X1) and the discipline of learning (X2) together with the readiness of the industry work practices (Y) class XI student Lightweight Vehicle Engineering Vocational School Nanggulan Kulon Progo Maarif School Year 2013/2014.

Sign in / Sign up

Export Citation Format

Share Document