scholarly journals АНАЛІЗ ЕНЕРГЕТИЧНИХ ХАРАКТЕРИСТИК БУДІВЛІ НАВЧАЛЬНОГО КОРПУСУ СКЛАДНОЇ КОНФІГУРАЦІЇ ІЗ РОЗРОБКОЮ ПРОПОЗИЦІЙ ПО ПІДВИЩЕННЮ ЕНЕРГОЕФЕКТИВНОСТІ

2022 ◽  
pp. 49-59
Author(s):  
MARYNA SHOVKALIUK ◽  
ROMAN VASHCHYSHYN
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Educational Institution ◽  
Energy Performance ◽  
Actual Condition ◽  
Design Stage ◽  
Laboratory Equipment ◽  
Method Of Calculation ◽  
Specialized Software ◽  
Software Packages

There are many approaches to assessing the energy performance of buildings. In Ukraine, previously, when developing the energy passport of buildings, a method based on stationary calculations using degree-days of the heating period was used. Then, for the tasks of energy certification of buildings, a national calculation method based on the monthly quasi-stationary method was introduced. The simplified hourly method of calculation allows to consider thermal inertia of protections. In recent years, the methods of dynamic energy modeling using software packages have become increasingly relevant, because it allows at the preliminary design stage to estimate energy costs for different building needs before and after the implementation of energy efficiency projects and provides the ability to create 3D models based on geometric and thermal parameters, tasks of different configurations and types of engineering systems of the building. To build an energy model, a training building was chosen to determine energy consumption indicators and identify measures that have the greatest impact on the energy performance of the building.Purpose. Evaluation of energy characteristics of the educational building of a higher education institution with modeling of energy consumption in specialized software, technical and economic evaluation of opportunities to increase energy efficiency.Research methods. Energy inspection of the object of research and technical and economic analysis with the use of engineering methods of calculation, experimental measurements of the parameters of the microclimate of the building with the use of laboratory equipment were performed. Simulations are used in specialized software products RETScreen, EnergyPlus, DesignBuilder.Result. With the help of the developed models the structure of energy consumption of the educational building is obtained and the assessment of energy saving potential is carried out; in case of implementation of the proposed measures it is expected to reduce the consumption of energy resources and monetary costs for their payment, as well as improve the quality of educational services. The research was conducted as part of a master's thesis.Scientific novelty. The technical potential of this software for modeling the energy performance of a building of complex configuration on the example of the educational building of the educational institution, analyzed the methods of processing initial data for programs, comparative analysis of calculation results for the actual condition of the building, baseline and after implementing energy saving measures.Practical significance. As a result of the research, the potential of using different software packages to perform applied research of the master's dissertation was determined and a project of complex thermal modernization of the building of the educational building was developed.

Evaluation of Energy Usage for a Teaching and Research Complex

2006 ◽  
Author(s):  
M. Feng ◽  
Y.-X. Tao ◽  
E. Inclan ◽  
R. Bartra
Keyword(s):  
Energy Saving ◽  
Temperature Difference ◽  
Electricity Consumption ◽  
Energy Performance ◽  
South Florida ◽  
Data Monitoring ◽  
Laboratory Equipment ◽  
Teaching And Research ◽  
Chilled Water ◽  
Research Complex

The evaluation of energy performance for a teaching and research complex located in South Florida was carried out by auditing the energy bills, on-site data monitoring, and numerical simulation by computer. To facilitate the process of on-site data monitoring, a remotely controlled, wireless thermal monitoring system was deployed in the building. The system can automatically collect the temperature, relative humidity ratio, illumination intensity, and building electricity usage data for analysis. The contribution and savings potential of each energy consumption component is analyzed for the whole building. From the audit result it is obvious that laboratory equipment is the dominant electricity consumption factor. The fluctuation pattern of electricity usage due to artificial lighting demonstrates the effectiveness of occupancy sensors for energy saving during evenings, weekends and holidays. The trend of HVAC chilled water consumption rate follows closely with the indoor and outdoor temperature difference. Since the HVAC coil load represents the building's total cooling requirement, the ratio between chilled water rate and temperature difference reflects the building's comprehensive thermal resistance. This coefficient can be used as a new building energy index for future energy audits of similar buildings. Finally, computer software simulates several proposed energy saving scenarios, e.g. reducing the HVAC fresh air percentage, adding energy wheel to recycle the wasted cooling, etc. The result shows that installing energy wheel can save more cooling load than other methods, however such benefit is compromised by its extra motor electricity usage.

scholarly journals Reduction of Energy Intensity in Broiler Facilities: Methodology and Strategies

2021 ◽  
Vol 8 ◽  
Author(s):  
Catherine Baxevanou ◽  
Dimitrios Fidaros ◽  
Ilias Giannenas ◽  
Eleftherios Bonos ◽  
Ioannis Skoufos
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Thermal Energy ◽  
Energy Intensity ◽  
Electrical Energy ◽  
Energy Performance ◽  
Advanced Technology ◽  
Energy Audit ◽  
Wind Potential ◽  
Technology Level

Broiler facilities consume a lot of energy resulting in natural source depletion and greater greenhouse gas emissions. A way to assess the energy performance of a broiler facility is through an energy audit. In the present paper, an energy protocol for an energy audit is presented covering both phases of data collection and data elaboration. The operational rating phase is analytically and extendedly described while a complete mathematical model is proposed for the asset rating phase. The developed energy audit procedure was applied to poultry chambers located in lowland and mountainous areas of Epirus Greece for chambers of various sizes and technology levels. The energy intensity indices varied from 46 to 89 kWh/m2 of chamber area 0.25–0.48 kWh/kg of produced meat or 0.36–1.3 kWh/bird depending on the chamber technology level (insulation, automation, etc.) and the location where the unit was installed. The biggest energy consumer was heating followed by energy consumption for ventilation and cooling. An advanced technology level can improve energy performance by ~ 27%−31%. Proper insulation (4–7 cm) can offer a reduction of thermal energy consumption between 10 and 35%. In adequately insulated chambers, the basic heat losses are due to ventilation. Further energy savings can be achieved with more precise ventilation control. Automation can offer additional electrical energy saving for cooling and ventilation (15–20%). Energy-efficient lights can offer energy saving up to 5%. The use of photovoltaic (PV) technology is suggested mainly in areas where net-metering holds. The use of wind turbines is feasible only when adequate wind potential is available. Solar thermal energy is recommended in combination with a heat pump if the unit's heating and cooling systems use hot/cold water or air. Finally, the local production of biogas with anaerobic fermentation for producing thermal or electrical energy, or cogenerating both, is a choice that should be studied individually for each farm.

scholarly journals Understanding the energy performance GAP: case studies of energy efficient homes

2021 ◽  
Author(s):  
Moe Otsubo
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Energy Performance ◽  
Initial Energy ◽  
Energy Simulation ◽  
Design Stage ◽  
Performance Gap ◽  
Energy Models ◽  
Dynamic Energy Simulation ◽  
Actual Energy Consumption

The energy performance gap between the predicted and actual energy consumption of 3 LEED for Homes certified buildings were investigated. The actual energy consumptions of the homes were found to be 23 to 77% higher than the initial energy consumption predictions made during the design stage. Revisions to the HOT2000 models to account for changes made between the design and occupancy phase of the buildings helped reduce the gap (9 to 40%). The sources of the discrepancies were found to be related to the energy modeling program’s limitations, inconsistency between the energy model and the actual building, and additional loads in the homes. The HOT2000 program, which is used for obtaining the EnerGuide rating for LEED certified homes, was compared against a dynamic energy simulation program to assess the applicability of the use of the former for energy efficient homes. The use of EnergyPlus not only allowed for a more accurate representation of the actual homes in the energy models, but an increase in the EnerGuide rating for the home was seen, which in turn equates to additional points for the home under the “Energy & Atmosphere” category for the LEED for Homes certification process

scholarly journals Energy performance of single family houses in Serbia: Analysis of calculation procedures

2019 ◽  
Vol 23 (Suppl. 5) ◽  
pp. 1695-1705
Author(s):  
Dimitrije Manic ◽  
Mirko Komatina ◽  
Biljana Vucicevic ◽  
Marina Jovanovic
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Dynamic Simulation ◽  
Simulation Method ◽  
Energy Performance ◽  
Building Envelope ◽  
Test Case ◽  
Existing Buildings ◽  
Single Family ◽  
Steady State Method

Energy certification of buildings in Serbia was introduced in 2011 and energy label depends on energy need for heating per unit floor area of heated space, calculated by the fully prescribed monthly quasi-steady-state method defined by ISO 13790. In the Republic of Serbia, most of families live in single-family houses built before the energy certification of buildings was introduced. Therefore, the estimation of energy performance of the existing buildings is important for labeling, and evaluation of energy saving measures and energy strategies to be implemented. This paper examines the applicability of monthly method defined by National legislation on the existing buildings stock in Serbia, by comparing it to the more accurate dynamic simulation method. Typical single-family houses are taken as a test case, since they are responsible for about 76% of energy consumption for heating. The results show that the dynamic simulation method estimates 21% to 54% higher energy need for heating, compared to the monthly method. Also, the monthly method estimates up to 13% higher savings by typical building envelope energy saving measures, compared to the dynamic simulation. This paper recommends improvement in procedures for calculation of building energy performance index to better assess energy consumption, effects of energy saving measures, and create solid background for developing and implementing of energy saving strategies.

Energy Factor Analysis in Modular Product

2011 ◽  
Vol 130-134 ◽  
pp. 1314-1317
Author(s):  
Qing Di Ke ◽  
Hong Chao Zhang ◽  
Guang Fu Liu ◽  
Bing Bing Li
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Modular Design ◽  
Design Method ◽  
Energy Performance ◽  
Physical Parameters ◽  
Physical Analysis ◽  
Energy Factor ◽  
Modular Product ◽  
Energy Equations

Nowadays, due to the huge energy consumption, the energy-saving problems of the product have been emphasized with many designers. In this paper, informed by the modular design method, the total energy performance in modular product can be analyzed and separated into the energy performances of basic modules. And with the physical analysis of basic modules, the energy equations are established with the band graphs theory. Then, the physical parameters, which could influence the energy consumption, are identified as “energy factor”. Thus, the energy consumption of the modules could be optimized with adjusting design factors, and the energy-saving design scheme for the whole product is obtained in the optimized model. Finally, the model and the method in this paper are demonstrated by an instance of the crank block pump.

scholarly journals Trends of Energy Performance Certification of Buildings in Azerbaijan

2018 ◽  
Vol 7 (3.2) ◽  
pp. 563
Author(s):  
Samira Akbarova ◽  
. .
Keyword(s):  
European Union ◽  
Energy Consumption ◽  
Energy Saving ◽  
Energy Performance ◽  
Building Codes ◽  
Construction Sector ◽  
The European Union ◽  
Certification System ◽  
Energy Auditing ◽  
World Trend

Energy consumption by construction sector is estimated by multi- disciplinary energy auditing and results are represented in an energy performance building certificate. The building certification, which is a world trend today, is applied successfully for many buildings  inAzerbaijantoo. The purpose of this paper to study the current methodology of energy building certification in terms of the technological aspects of energy auditing. Many documents of the European Union directives and Russian building codes and regulations in the field of ecology and energy saving in construction sector have been revised for implementing them as base for national energy performance certification system AZERI GREEN ZOOM. The assessment categories and main requirements have been considered. The results of this overview have shown the trends and problems in this field.  There are given examples of certified buildings.  

How outdoor microclimate mitigation affects building thermal-energy performance: A new design-stage method for energy saving in residential near-zero energy settlements in Italy

2018 ◽  
Vol 127 ◽  
pp. 920-935 ◽  
Author(s):  
Veronica Lucia Castaldo ◽  
Anna Laura Pisello ◽  
Cristina Piselli ◽  
Claudia Fabiani ◽  
Franco Cotana ◽  
...  
Keyword(s):  
Energy Saving ◽  
Thermal Energy ◽  
Energy Performance ◽  
Design Stage ◽  
Zero Energy

scholarly journals A comparative benchmarking study of multi-storey residential buildings in two periods of energy saving efforts: the 1980s and the 2010s

2021 ◽  
Vol 2069 (1) ◽  
pp. 012075
Author(s):  
O M Jensen ◽  
J Rose ◽  
J Kragh ◽  
C H Christiansen ◽  
M Grimmig ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Measurement Data ◽  
Building Energy ◽  
Energy Performance ◽  
Building Energy Performance ◽  
Heated Area ◽  
Energy Signature ◽  
Change Point Models

Abstract In 1990, Technological Institute (TI) in Denmark made a benchmarking study of 92 typical multi-storey buildings covering 23 000 dwellings. The study included measurement data from the 1970s and the years after the energy crises. This study showed that over a period of less than 20 years a significant reduction in energy consumption took place. In a new similar study, TI and Aalborg University have analysed 62 buildings covering 18 000 dwellings including measurement data from the last 20 years. This time, the data covers a period with an increasing focus on the carbon-emission impacts of energy consumption. As opposed to the first benchmarking study, the new 20-years study shows that the heat consumption has been almost constant over the last 20 years. This paper presents a comparative study of the two sets of measurements and evaluates energy saving efforts and individual building energy performance. Furthermore, the paper compares two different ways of deriving benchmarks from the data and demonstrates how utilizing change-point models/energy signature as opposed to the more traditional mean annual values per heated area, significantly increases the usability.

scholarly journals Top Energy Saver of the Year: Results of an Energy Saving Competition in Public Buildings

2020 ◽  
Vol 24 (3) ◽  
pp. 278-293
Author(s):  
Jan Kaselofsky ◽  
Ralf Schüle ◽  
Marika Rošā ◽  
Toms Prodaņuks ◽  
Anda Jekabsone ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Energy Use ◽  
Residential Buildings ◽  
Electricity Consumption ◽  
Energy Performance ◽  
Heat Consumption ◽  
The European Union ◽  
Public Building ◽  
Team Members

AbstractNon-residential buildings in the European Union consume more than one third of the building sector’s total. Many non-residential buildings are owned by municipalities. This paper reports about an energy saving competition that was carried out in 91 municipal buildings in eight EU member states in 2019. For each public building an energy team was formed. The energy teams’ activities encompassed motivating changes in the energy use behaviour of employees and small investments. Two challenges added an element of gamification to the energy saving competition. To assess the success of the energy saving competition, an energy performance baseline was calculated using energy consumption data of each public building from previous years. Energy consumption in the competition year was monitored on a monthly base. After the competition the top energy savers from each country were determined by the percentage-based reduction of energy consumption compared to the baseline. On average, the buildings had an electricity and heat consumption in 2019 that was about 8 % and 7 %, respectively, lower than the baseline. As an additional data source for the evaluation, a survey among energy team members was conducted at the beginning and after the energy competition. Support from superiors, employee interest and motivation and behaviour change as assessed by energy team members show a positive, if weak or moderate, correlation with changes in electricity consumption, but not with changes in heat consumption.

Determining a Practically Optimal Overhang Depth for South-Facing Windows in Hot Summer and Cold Winter Zone

2017 ◽  
Vol 42 (2) ◽  
pp. 82-88
Author(s):  
Jian Yao ◽  
Rong-Yue Zheng
Keyword(s):  
Total Energy ◽  
Energy Saving ◽  
Energy Savings ◽  
Building Energy ◽  
Energy Performance ◽  
Simulation Software ◽  
Design Stage ◽  
Cold Winter ◽  
Aesthetic Appearance ◽  
Daylight Performance

This study investigated the building energy, glare and daylight performance of overhang using building simulation software Energyplus in order to identify an optimal depth in hot summer and cold winter zone. A typical building with different window-to-wall ratios (WWR) was modeled and different overhang depths were considered. Results showed that the optimal overhang depths are 0.9m (WWR=0.15), 1.16m (WWR=0.3) and 1.62m (WWR=0.57), respectively. The total energy savings from overhang design can be ranging from about 3% to 24% depending on WWR and overhang depth. Moreover, the regression relationship between optimal overhang depth and WWR is given to help identify the best overhang dimension at the design stage. The potential energy saving performance for different WWRs then can be roughly inferred according to a total energy saving chart without building energy simulation. In conclusion, to be applicable in buildings, an overhang depth of 0.6-0.8m is suitable in this region since it has a balance in energy performance and aesthetic appearance.

Sign in / Sign up

Export Citation Format

Share Document