scholarly journals AUTOMATION OF STRUCTURAL AND PARAMETRIC ANALYSIS OF PROJECT DECISIONS AND TRAINING OF THE DESIGNER OF MACHINE-BUILDING PRODUCTS WITH CAD COMPASS

2019 ◽  
Vol 2018 (2) ◽  
pp. 26-33
Author(s):  
Александр Афанасьев ◽  
Afanasyev Afanasyev ◽  
Сергей Бригаднов ◽  
Sergey Brigadnov
Keyword(s):  
Adaptive Learning ◽  
Computer Aided Design ◽  
Parametric Analysis ◽  
Three Dimensional ◽  
Machine Building ◽  
Building Products ◽  
Computer Aided ◽  
Design Solutions ◽  
Aided Design

The actual task in the field of computer-aided design of machine-building objects is to increase the level of automation of structural-parametric analysis of design solutions due to the repetition of their use, reducing the number of design operations and ensuring the corresponding competencies of designers. Developed methods and algorithms should ensure the acquisition of the necessary competencies for the designer for successful project activities in the field of computer-aided design, increasing the effectiveness of training. The system of analysis of design solutions should improve the quality of design solutions implemented in CAD KOMPAS-3D. In this paper, an overview of methods, systems and tools for analyzing design solutions implemented in the CAD-3D environment. The main features of such systems are described, their main disadvantages are identified: the lack of functions for determining non-optimal sequences of design operations, the inability to automatically rebuild a three-dimensional model of a machine-building product on the basis of analysis of the design model tree. A complex system for the analysis of project solutions and the training of a designer was developed and implemented, based on methods, models and algorithms for analysis and adaptive learning. The results of a computational experiment are presented, on the basis of which it can be concluded that the use of developed software enhances the efficiency and quality of the designer's training in the processes of constructing three-dimensional solid-state machine-building products in CAD KOMPAS-3D.

The current state of affairs in 3D modeling of machine-building profile parts

2021 ◽  
pp. 32-38
Author(s):  
E.T. Agaev ◽  
◽  
A.Yu. Bekmeshov ◽  
Keyword(s):  
Computer Aided Design ◽  
Machine Building ◽  
Software Environment ◽  
Current State ◽  
Computer Aided ◽  
Correct Representation ◽  
Design Systems ◽  
State Of Affairs ◽  
Aided Design

The article discusses the method of improving the quality of computer-aided design of machine-building products based on the introduction of the concept of 3D drawing. A comparative analysis of the application of a 3D drawing and the use of a standard flat drawing for the manufacture of machine-building profile products on modern CNC machines is given. The 3D drawings of the products are developed in the SolidWorks software environment. Based on the analysis, it is concluded that the use of 3D drawings in compliance with their correct representation in computer-aided design systems will reduce the time for the manufacture of relevant parts.

scholarly journals Automatized Evaluation of Students’ CAD Models

2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Application ◽  
Test Cases ◽  
Cad Model ◽  
Computer Solution ◽  
3D Cad ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.

scholarly journals Influence of Sequential CAD/CAM Milling on the Fitting Accuracy of Titanium Three-Unit Fixed Dental Prostheses

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1401
Author(s):  
Doo-Bin Song ◽  
Man-So Han ◽  
Si-Chul Kim ◽  
Junyong Ahn ◽  
Yong-Woon Im ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Computer Aided Design ◽  
Dental Prostheses ◽  
Computer Aided ◽  
Cad Cam ◽  
Fixed Dental Prostheses ◽  
Gap Data ◽  
Aided Design ◽  
Fitting Accuracy

This study investigated the fitting accuracy of titanium alloy fixed dental prostheses (FDP) after sequential CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) fabrication. A three-unit FDP model connecting mandibular second premolars and molars was prepared and scanned to fabricate titanium FDPs by CAD/CAM milling. A total of six FDPs were sequentially milled in one titanium alloy disk using a new set of burs every time (n = 4). The fitting accuracy of FDPs was mesiodistally evaluated by a silicone replica technique and the measurement was triplicated at four different locations: MO (marginal opening), MG (marginal gap), AG (axial gap), and OG (occlusal gap). Data were statistically analyzed using ANOVA and Tukey’s HSD test. The fitting accuracy of PMMA (polymethyl methacrylate) FDPs milled using the worn or new bur were evaluated by the same procedure (n = 6). The mean dimensions of titanium FDP for all measuring positions, except for AG, were significantly increased from the third milling. However, no difference was noted between the first FDP and the second FDP milled with the same set of burs. Severe edge chippings were observed in all milling burs. Detrimental effects of the worn burs on the fitting accuracy were demonstrated in the CAD/CAM-milled PMMA FDP. The results recommend proper changing frequency of cutting burs to achieve the quality of fit and predictable outcomes for dental CAD/CAM prostheses.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

scholarly journals The Influence of Exposure Energy Density on Porosity and Microhardness of the SLM Additive Manufactured Elements

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2304 ◽  
Author(s):  
Janusz Kluczyński ◽  
Lucjan Śnieżek ◽  
Krzysztof Grzelak ◽  
Janusz Mierzyński
Keyword(s):  
Computer Aided Design ◽  
Complex Geometry ◽  
Final Analysis ◽  
Machine Building ◽  
Layer By Layer ◽  
Laser Melting ◽  
Measurement Results ◽  
Computer Aided ◽  
Exposure Energy ◽  
Aided Design

Selective laser melting (SLM) is an additive manufacturing technique. It allows elements with very complex geometry to be produced using metallic powders. A geometry of manufacturing elements is based only on 3D computer-aided design (CAD) data. The metal powder is melted selectively layer by layer using an ytterbium laser. This paper contains the results of porosity and microhardness analysis made on specimens manufactured during a specially prepared process. Final analysis helped to discover connections between changing hatching distance, exposure speed and porosity. There were no significant differences in microhardness and porosity measurement results in the planes perpendicular and parallel to the machine building platform surface.

scholarly journals Development of integrated intelligent computer-aided design system for mechanical power-transmitting mechanism design

2017 ◽  
Vol 9 (7) ◽  
pp. 168781401771038 ◽  
Author(s):  
Isad Saric ◽  
Adil Muminovic ◽  
Mirsad Colic ◽  
Senad Rahimic
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Mechanical Power ◽  
Design System ◽  
Computer Aided ◽  
Aided Design ◽  
Intelligent Computer

This article presents architecture of integrated intelligent computer-aided design system for designing mechanical power-transmitting mechanisms (IICADkmps). The system has been developed in C# program environment with the aim of automatising the design process. This article presents a modern, automated approach to design. Developed kmps modules for calculation of geometrical and design characteristics of mechanical power-transmitting mechanisms are described. Three-dimensional geometrical parameter modelling of mechanical power-transmitting mechanisms was performed in the computer-aided design/computer-aided manufacturing/computer-aided engineering system CATIA V5. The connection between kmps calculation modules and CATIA V5 modelling system was established through initial three-dimensional models – templates. The outputs from the developed IICADkmps system generated final three-dimensional virtual models of mechanical power-transmitting mechanisms. Testing of the developed IICADkmps system was performed on friction, belt, cogged (spur and bevel gears) and chain transmitting mechanisms. Also, connection of the developed IICADkmps system with a device for rapid prototyping and computer numerical control machines was made for the purpose of additional testing and verification of practical use. Physical prototypes of designed characteristic elements of mechanical power-transmitting mechanisms were manufactured. The selected test three-dimensional virtual prototypes, obtained as an output from the developed IICADkmps system, were manufactured on the device for rapid prototyping (three-dimensional colour printer Spectrum Z510) and computer numerical control machines. Finally, at the end of the article, conclusions and suggested possible directions of further research, based on theoretical and practical research results, are presented.

Recognising Facial Surfaces

Perception ◽  
1991 ◽  
Vol 20 (6) ◽  
pp. 755-769 ◽  
Author(s):  
Vicki Bruce ◽  
Patrick Healey ◽  
Mike Burton ◽  
Tony Doyle ◽  
Anne Coombes ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Head Model ◽  
Matching Accuracy ◽  
The People ◽  
Computer Aided ◽  
Closed Head ◽  
The Face ◽  
Aided Design ◽  
Dimensional Surface

The extent to which faces depicted as surfaces devoid of pigmentation and with minimal texture cues (‘head models’) could be matched with photographs (when unfamiliar) and identified (when familiar) was examined in three experiments. The head models were obtained by scanning the three-dimensional surface of the face with a laser, and by displaying the surface measured in this way by using standard computer-aided design techniques. Performance in all tasks was above chance but far from ceiling. Experiment 1 showed that matching of unfamiliar head models with photographs was affected by the resolution with which the surface was displayed, suggesting that subjects based their decisions, at least in part, on three-dimensional surface structure. Matching accuracy was also affected by other factors to do with the viewpoints shown in the head models and test photographs, and the type of lighting used to portray the head model. In experiment 2 further evidence for the importance of the nature of the illumination used was obtained, and it was found that the addition of a hairstyle (not that of the target face) did not facilitate matching. In experiment 3 identification of the head models by colleagues of the people shown was compared with identification of photographs where the hair was concealed and eyes were closed. Head models were identified less well than these photographs, suggesting that the difficulties in their recognition are not solely due to the lack of hair. Women's heads were disproportionately difficult to recognise from the head models. The results are discussed in terms of their implications for the use of such three-dimensional head models in forensic and surgical applications.

Sign in / Sign up

Export Citation Format

Share Document