Some small-sized Cosmarium (Conjugatophyceae, Desmidiales) from sphagnum bogs of Moscow Region

2013 ◽  
Vol 47 ◽  
pp. 13-20
Author(s):  
O. V. Anissimova
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Moscow Region ◽  
Biological Station ◽  
Sphagnum Bogs ◽  
Different Seasons ◽  
Scanning Electron

Algae samples were collected during different seasons from 1997 to 2011 in two swamps located at Zvenigorod Biological Station in Moscow Region. There were found 25 Cosmarium species and varieties, 9 taxa of them being new to the region. Descriptions of the taxa were specified by observation of cell wall ornamentation with light and scanning electron microscopy. Original descriptions, photos and drawings of algae are presented.

Determination of cotton fiber maturity and linear density (fineness) by examination of fiber cross-sections. Part 2: A comparison optical and scanning electron microscopy

2014 ◽  
Vol 84 (18) ◽  
pp. 1939-1947 ◽  
Author(s):  
Geoffrey RS Naylor ◽  
Margaret Pate ◽  
Graham J Higgerson
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Optical Microscopy ◽  
Cross Sections ◽  
Linear Density ◽  
Wall Area ◽  
Density Values ◽  
Fiber Maturity ◽  
Scanning Electron

Previous researchers established a set of reference cottons with known fiber maturity and linear density (fineness) values based on the analysis of a large number of individual transverse fiber cross-sections viewed under the optical microscope. Part 1 identified that the limited optical resolution of the captured images may be the source of a significant systematic error in the assigned values of cell wall area and hence fiber maturity and linear density values. In this paper the optical microscopy technique was implemented. Individual cross-sections were measured using this approach and also higher resolution and higher magnification images were obtained using scanning electron microscopy. It was found that the data obtained from optical microscopy were similar to the SEM data, with the perimeter being 2% smaller, the cell wall area being 6% larger and the maturity ratio values being 8% higher. It was concluded that the combined approach of utilizing SEM in conjunction with optical imaging is a useful approach for verifying and perhaps correcting the data obtained from optical imaging. Further the SEM images highlighted that the current experimental protocol does not adequately address the challenge of ensuring that the fibers are mounted normal to the plane of cutting the transverse cross-section. Modeling demonstrated that while maturity ratio values are relatively insensitive to this misalignment, measured cell wall area values and hence fiber linear density values will be overestimated. This may be the major source of error associated with the technique and warrants further attention in future studies.

scholarly journals Serial Block-Face Scanning Electron Microscopy Reveals That Intercellular Nuclear Migration Occurs in Most Normal Tobacco Male Meiocytes

2021 ◽  
Vol 12 ◽  
Author(s):  
Sergey Mursalimov ◽  
Nobuhiko Ohno ◽  
Mami Matsumoto ◽  
Sergey Bayborodin ◽  
Elena Deineko
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Three Dimensional ◽  
Nuclear Migration ◽  
Male Meiosis ◽  
Face Scanning ◽  
Block Face ◽  
Plant Meiosis ◽  
Scanning Electron

Serial block-face scanning electron microscopy (SBF-SEM) was used here to study tobacco male meiosis. Three-dimensional ultrastructural analyses revealed that intercellular nuclear migration (INM) occurs in 90–100% of tobacco meiocytes. At the very beginning of meiosis, every meiocyte connected with neighboring cells by more than 100 channels was capable of INM. At leptotene and zygotene, the nucleus in most tobacco meiocytes approached the cell wall and formed nuclear protuberances (NPs) that crossed the cell wall through the channels and extended into the cytoplasm of a neighboring cell. The separation of NPs from the migrating nuclei and micronuclei formation were not observed. In some cases, the NPs and nuclei of neighboring cells appeared apposed to each other, and the gap between their nuclear membranes became invisible. At pachytene, NPs retracted into their own cells. After that, the INM stopped. We consider INM a normal part of tobacco meiosis, but the reason for such behavior of nuclei is unclear. The results obtained by SBF-SEM suggest that there are still many unexplored features of plant meiosis hidden by limitations of common types of microscopy and that SBF-SEM can turn over a new leaf in plant meiosis research.

High-Resolution Field Emission Scanning Electron Microscopy (FESEM) Imaging of Cellulose Microfibril Organization in Plant Primary Cell Walls

2017 ◽  
Vol 23 (5) ◽  
pp. 1048-1054 ◽  
Author(s):  
Yunzhen Zheng ◽  
Daniel J. Cosgrove ◽  
Gang Ning
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
High Resolution ◽  
Field Emission ◽  
Cell Walls ◽  
Cellulose Microfibrils ◽  
Critical Point Drying ◽  
Sputter Coating ◽  
Scanning Electron

AbstractWe have used field emission scanning electron microscopy (FESEM) to study the high-resolution organization of cellulose microfibrils in onion epidermal cell walls. We frequently found that conventional “rule of thumb” conditions for imaging of biological samples did not yield high-resolution images of cellulose organization and often resulted in artifacts or distortions of cell wall structure. Here we detail our method of one-step fixation and dehydration with 100% ethanol, followed by critical point drying, ultrathin iridium (Ir) sputter coating (3 s), and FESEM imaging at a moderate accelerating voltage (10 kV) with an In-lens detector. We compare results obtained with our improved protocol with images obtained with samples processed by conventional aldehyde fixation, graded dehydration, sputter coating with Au, Au/Pd, or carbon, and low-voltage FESEM imaging. The results demonstrated that our protocol is simpler, causes little artifact, and is more suitable for high-resolution imaging of cell wall cellulose microfibrils whereas such imaging is very challenging by conventional methods.

Deposition of glucuronoxylans on the secondary cell wall of Japanese beech as observed by immuno-scanning electron microscopy

PROTOPLASMA ◽  
2000 ◽  
Vol 212 (1-2) ◽  
pp. 72-79 ◽  
Author(s):  
Tatsuya Awano ◽  
Keiji Takabe ◽  
Minoru Fujita ◽  
Geoffrey Daniel
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Secondary Cell Wall ◽  
Japanese Beech ◽  
Scanning Electron

scholarly journals Molecular Docking, Dynamics Simulation, and Scanning Electron Microscopy (SEM) Examination of Clinically Isolated Mycobacterium tuberculosis by Ursolic Acid: A Pentacyclic Triterpenes

2019 ◽  
Vol 19 (2) ◽  
pp. 328
Author(s):  
Dian Ayu Eka Pitaloka ◽  
Sophi Damayanti ◽  
Aluicia Anita Artarini ◽  
Elin Yulinah Sukandar
Keyword(s):  
Electron Microscopy ◽  
Molecular Dynamics ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Mycobacterium Tuberculosis ◽  
Ursolic Acid ◽  
Resistant Strain ◽  
Dynamics Simulation ◽  
Computational Docking ◽  
Scanning Electron

The purpose of this study was to analyze the inhibitory action of ursolic acid (UA) as an antitubercular agent by computational docking studies and molecular dynamics simulations. The effect of UA on the cell wall of Mycobacterium tuberculosis (MTB) was evaluated by using Scanning Electron Microscopy (SEM). UA was used as a ligand for molecular interaction and investigate its binding activities to a group of proteins involved in the growth of MTB and the biosynthesis of the cell wall. Computational docking analysis was performed by using autodock 4.2.6 based on scoring functions. UA binding was confirmed by 30 ns molecular dynamics simulation using gromacs 5.1.1. H37Rv sensitive strain and isoniazid-resistant strain were used in the SEM study. UA showed to have the optimum binding affinity to inhA (Two-trans-enoyl-ACP reductase enzyme involved in elongation of fatty acid) with the binding energy of -9.2 kcal/mol. The dynamic simulation showed that the UA-inhA complex relatively stable and found to establish hydrogen bond with Thr196 and Ile194. SEM analysis confirms that UA treatment in both sensitive strain and resistant strain affected the morphology cell wall of MTB. This result indicated that UA could be one of the potential ligands for the development of new antituberculosis drugs.

scholarly journals Morphological and physicochemical diversity of snow algae from Alaska

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Marta J. Fiołka ◽  
Nozomu Takeuchi ◽  
Weronika Sofińska-Chmiel ◽  
Sylwia Mieszawska ◽  
Izabela Treska
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Cell Types ◽  
Microscopy Imaging ◽  
Excitation Light ◽  
X Ray ◽  
Acridine Orange Staining ◽  
Snow Algae ◽  
Scanning Electron

Abstract Snow algae are photosynthetic microbes growing in thawing snow. They usually show various morphological cell types. The aim of this study was to carry out microscopic and spectroscopic analysis of different forms of cells of snow algae collected on glaciers in Alaska. Four different shapes of algal cells were observed with the use of bright field LM (Light Microscopy), DIC (Differential Interference Contrast), EDF (Extended Depth Focus), fluorescence microscopy, and SEM (Scanning Electron Microscopy). The cells exhibited the strongest autofluorescence after the exposure to 365-nm excitation light, and the intensity differed among the cell types. Zygotes (cysts) showed the most intense fluorescence. Acridine orange staining revealed the acid nature of the algal cells. The use of Congo red and Calcofluor white fluorochromes indicated differences in the structure of polysaccharides in the cell wall in the individual types of algal cells. FTIR (Fourier-Transform Infrared Spectroscopy) analyses showed the presence of polysaccharides not only in the algal cells but also in the fixative solution. The presence of polysaccharides in the extracellular algal fraction was confirmed by X-ray dispersion spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy imaging (SEM). The differences observed in the structure of the cell wall of the different forms of red snow algae prompt further analysis of this structure.

scholarly journals A Simple Technique For The Removal Of Plant Cell Protoplasm To Facilitate Scanning : Electron Microscopy Of Fungal Haustoria And Plant Cell Wall Features

2001 ◽  
Vol 9 (3) ◽  
pp. 14-15 ◽  
Author(s):  
B. A. Richardson ◽  
C. W. Mims
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Wall ◽  
Plant Cell ◽  
Host Plants ◽  
Plant Cell Wall ◽  
Simple Technique ◽  
Plant Cells ◽  
Host Cell Wall ◽  
Scanning Electron

Several years ago Honegger (1985) described a simple technique for removing plant cell protoplasm in order to reveal details of interfaces between plant cells and fungal structures. This technique involves the use of Ariel a commercially available washing powder (Proctor and Gamble) containing a Bacillus substilis derived protease. We since have used this technique with excellent results to examine not only the morphology of fungal haustoria inside leaf cells of various host plants but also features of the inner surface of the host cell wall with scanning electron microscopy (SEM). Here we describe the procedure we have used to prepare samples for study and provide examples of the types of images we have obtained from our samples.

Sign in / Sign up

Export Citation Format

Share Document