Development of Performance Specifications for Shrinkage of Portland Cement Concrete

2003 ◽  
Vol 1834 (1) ◽  
pp. 40-47 ◽  
Author(s):  
David W. Mokarem ◽  
Richard E. Weyers ◽  
D. Stephen Lane
Keyword(s):  
Portland Cement ◽  
Prediction Models ◽  
Drying Shrinkage ◽  
Chloride Ions ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Volume Changes ◽  
Code Model ◽  
Concrete Mixtures ◽  
Performance Specifications

During its service life, concrete experiences volume changes. One of the types of deformation experienced by concrete is shrinkage. There are four main types of shrinkage associated with concrete: plastic, autogenous, carbonation, and drying shrinkage. The volume changes in concrete from shrinkage can lead to the cracking of the concrete. In the case of reinforced concrete, cracks in the cover concrete provide a direct path for chloride ions to reach and corrode the reinforcing steel. The development of concrete drying-shrinkage performance specifications with an associated test procedure was assessed for concrete mixtures purchased by the Virginia Department of Transportation (VDOT). Five existing shrinkage-prediction models were also assessed to determine the accuracy and precision of each model as it pertains to the VDOT mixtures used in this study. The five models are the ACI 209 Code model, CEB90 Code model, Bazant B3 model, Gardner–Lockman model, and Sakata model. The percentage length change limits for the portland cement concrete mixtures were found to be 0.0300% at 28 days and 0.0400% at 90 days. The CEB90 Code model was judged as the best prediction model for the VDOT portland cement concrete mixtures.

EXPLORATORY STUDY ON THE MECHANICAL AND PHYSICAL PROPERTIES OF CONCRETE CONTAINING SULFUR

2015 ◽  
Vol 77 (32) ◽  
Author(s):  
David Yeoh ◽  
Koh Heng Boon ◽  
Norwati Jamaluddin
Keyword(s):  
Portland Cement ◽  
Physical Properties ◽  
Ordinary Portland Cement ◽  
Cement Content ◽  
Drying Shrinkage ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Complete Replacement ◽  
Mechanical And Physical Properties ◽  
Ordinary Portland Cement Concrete

This research is an exploratory experiment into sulfur concrete used not as a complete replacement of cement but as an additional material in percentage of the cement content. The aim of this research was to explore the possible appreciation of mechanical and physical properties of concrete containing sulfur with percentages of 1%, 5% and 10% of the cement content. The sulfur used here was not heat-activated, hence the binding effect in sulfur was absent. The experimental results revealed that concrete containing sulfur did not perform better in their strength properties, both compressive strength and flexural strength. The physical properties such as water penetration and water absorption for concrete containing sulfur also showed poor performance in comparison to ordinary Portland cement concrete. Such phenomena are very likely due to the sulfur not being activated by heat. Carbonation test did not show good results as a longer term of testing is required. Drying shrinkage property was found to be encouraging in that concrete containing 10% sulfur had quite significant reduction in drying shrinkage as opposed to ordinary Portland cement concrete. 

scholarly journals Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates

2021 ◽  
Author(s):  
Gilson Lomboy ◽  
Douglas Cleary ◽  
Seth Wagner ◽  
Yusef Mehta ◽  
Danielle Kennedy ◽  
...  
Keyword(s):  
Portland Cement ◽  
Cementitious Materials ◽  
Recycled Concrete ◽  
Supplementary Cementitious Materials ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Concrete Aggregates ◽  
Concrete Mixtures

Dwindling supplies of natural concrete aggregates, the cost of landfilling construction waste, and interest in sustainable design have increased the demand for recycled concrete aggregates (RCA) in new portland cement concrete mixtures. RCA repurposes waste material to provide useful ingredients for new construction applications. However, RCA can reduce the performance of the concrete. This study investigated the effectiveness of ternary blended binders, mixtures containing portland cement and two different supplementary cementitious materials, at mitigating performance losses of concrete mixtures with RCA materials. Concrete mixtures with different ternary binder combinations were batched with four recycled concrete aggregate materials. For the materials used, the study found that a blend of portland cement, Class C fly ash, and blast furnace slag produced the highest strength of ternary binder. At 50% replacement of virgin aggregates and ternary blended binder, some specimens showed comparable mechanical performance to a control mix of only portland cement as a binder and no RCA substitution. This study demonstrates that even at 50% RCA replacement, using the appropriate ternary binder can create a concrete mixture that performs similarly to a plain portland cement concrete without RCA, with the added benefit of being environmentally beneficial.

scholarly journals On effect of superplasticizers and mineral additives on shrinkage of hardened cement paste and concrete

2018 ◽  
Vol 196 ◽  
pp. 04018 ◽  
Author(s):  
Grigory Nesvetaev ◽  
Yulia Koryanova ◽  
Tatiana Zhilnikova
Keyword(s):  
Portland Cement ◽  
Cement Paste ◽  
Autogenous Shrinkage ◽  
Drying Shrinkage ◽  
Hardened Cement ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Hardened Cement Paste ◽  
Mineral Additive ◽  
Mineral Additives

A model describing the variation in autogenous shrinkage and drying shrinkage of portland cement concrete, depending on the volume of aggregates and the shrinkage of hardened cement paste, is presented. The equation to calculate shrinkage of concrete as a function of the volume of aggregates and shrinkage of a hardened cement paste was proposed. Formulas are proposed that describe the change in the shrinkage of hardened cement paste as a function of water/cement. The results of studies of the effect of superplasticizers and mineral additives on the autogenous shrinkage and the drying shrinkage of hardened cement paste are presented. Concretes made with superplasticizer and mineral additive may have the potential lower the value of drying shrinkage. The shrinkage value can be lowered from 30% till 70%. Concretes containing superplasticizers and mineral additives can potentially have the autogenous shrinkage reduced to 75%, or increased to 180%.

Chloride Ion Diffusion of Phosphoaluminate Cement Concrete

2009 ◽  
Vol 79-82 ◽  
pp. 99-102 ◽  
Author(s):  
Zhu Ding ◽  
Feng Xing ◽  
Ming Zhang ◽  
Peng Liu
Keyword(s):  
Portland Cement ◽  
Chloride Ion ◽  
Chloride Ions ◽  
Hydration Products ◽  
Portland Cement Concrete ◽  
Ion Diffusion ◽  
Cement Concrete ◽  
Dense Microstructure ◽  
Corrosion Of Steel ◽  
Chloride Ion Diffusion

Penetration and diffusion of chloride ions in concrete can lead to the corrosion of steel bar and shorten the service life of concrete structures. Phosphoaluminate cement (PAC) is a new cementitious material which has many special properties compared to Portland cement (PC). In the study, chloride ion diffusion in PAC concrete was tested with RCM method. The phase composition and morphology of hydration products, pore volume of hardened paste cured for 28d were analyzed with X-ray diffraction (XRD) and mercury intrusion porosimetry (MIP). The results show that chloride ion diffusion coefficient of PAC concrete is much lower than that of Portland cement concrete under the same test conditions. The hydration products of PAC are main micro-crystalline phase and gel of phosphate and/or phophoaluminate, which formed a dense microstructure. There is no calcium hydroxide produced in the PAC hydration system. In hardened PAC paste, chloride ions might replace the atom group [OH] - and [PO4]3- of hydrates and become stable compounds. The resistance to chloride ion diffusion of PAC concrete will increase with the hydration age, because its microstructure becomes denser with the hydration age increasing.

scholarly journals EVALUATION OF CONCRETE RESISTANCE TO CHLORIDE IONS PENETRATION BY MEANS OF ELECTRIC RESISTIVITY MONITORING

2005 ◽  
Vol 11 (2) ◽  
pp. 109-114 ◽  
Author(s):  
Marta Kosior-Kazberuk ◽  
Walery Jezierski
Keyword(s):  
Portland Cement ◽  
Salt Solution ◽  
Chloride Ion ◽  
Chloride Ions ◽  
Chloride Salt ◽  
Test Results ◽  
Ion Permeability ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Concrete Resistivity

The chloride‐induced corrosion of reinforcing steel is the major reason for the premature deterioration and degradation of field concrete structures built in a salt‐laden environment. The results of investigation of the bituminous addition effect on Portland cement concrete resistance to chloride ions penetration are presented in this paper. Chloride penetration was simulated by subjecting samples to cyclic loading with salt solution and drying. Concrete resistivity development was monitored during 12 months. The test results have been analysed to verify the effect of addition content, the time of exposure in aggressive environment, as well as the sort of cement on chloride ion permeability of Portland cement concrete. The statistical analysis showed that bituminous addition significantly improves the concrete resistance to chloride salt solution penetration.

Development of a Capacitor Probe to Detect Subsurface Deterioration in Concrete

1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi
Keyword(s):  
Dielectric Constant ◽  
Portland Cement ◽  
Electromagnetic Waves ◽  
Low Cost ◽  
Complex Dielectric Constant ◽  
Life Cycle Costs ◽  
Parallel Plates ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Set Up

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.

Sign in / Sign up

Export Citation Format

Share Document