scholarly journals Improvement of technological processes of non-seedling method of growing sugar beet seed

2020 ◽  
Vol 106 (2) ◽  
pp. 104-111
Author(s):  
V. Kurilo ◽  
◽  
V. Pryshliak ◽  
Keyword(s):  
Sugar Beet ◽  
Seed Production ◽  
Seed Yield ◽  
Production Costs ◽  
Yield Increase ◽  
Technological Processes

The article describes the advanced, based on the results of research on the agrophysical properties of plants, technological processes of a non-seedling method of seed production. The agrotechnical techniques developed and proposed for practical use are shown, which provide the increase of seed yield, increase of their coefficient of reproduction and reduction of production costs. The results of the research can be used to improve and optimize zonal technologies and facilities for growing and harvesting sugar beet seed.

Nitrogen responses of canola in low to medium rainfall environments of Western Australia

2016 ◽  
Vol 67 (4) ◽  
pp. 450 ◽  
Author(s):  
Mark Seymour ◽  
Sally Sprigg ◽  
Bob French ◽  
Jackie Bucat ◽  
Raj Malik ◽  
...  
Keyword(s):  
Seed Yield ◽  
Western Australia ◽  
Return On Investment ◽  
Production Costs ◽  
Annual Rainfall ◽  
Minor Effect ◽  
Gross Margin ◽  
Brassica Napus L ◽  
N Application ◽  
Yield Increase

Canola (Brassica napus L.) is widely grown throughout all rainfall zones in south-western Australia. Yields are low by world standards, and variable in low-rainfall (<350 mm annual rainfall) and medium-rainfall (350–450 mm) zones, so that minimising production costs is a major consideration for growers in these areas. One of the major input costs is nitrogen (N) fertiliser. Fifteen N rate × application time × canola plant-type experiments were conducted in the low- and medium-rainfall zones between 2012 and 2014. In most experiments, five rates of N were tested, of ranges 0–75, 0–100, or 0–150 kg N/ha. Nitrogen was applied at four different times (seeding, or 4, 8 or 12 weeks after sowing) or split between these timings. Each experiment compared triazine-tolerant (TT), open-pollinated (OP) canola with Roundup Ready (RR) hybrid canola, and one experiment included TT hybrid and RR OP canola types. On average, RR hybrid produced 250 kg/ha, or 23% more seed and 2.2% more oil than TT OP canola, and the average gross margin of RR hybrid was AU$65/ha more than TT OP. However, seed yield and gross margin differences between RR hybrid and TT OP canola were reduced when seed yields were <1400 kg/ha. Canola growth (dry matter) and seed yield responded positively to N fertiliser in most experiments, with 90% of maximum seed yield achieved at an average of 46 kg N/ha (s.e. 6). However, 90% of maximum gross margin was achieved at a lower average N rate of 17 kg N/ha, due primarily to the relatively small yield increase compared with the reduction in concentration of oil in the seed with N applied. Because canola growers of south-western Australia are now paid an uncapped premium for canola grain with oil concentration >42%, decreases in oil percentage have a significant financial effect, and recommended rates of N should be lower than those calculated to optimise seed yield. In 80% of cases, the first 10 kg N/ha applied provided a return on investment in N >$1.50 for every $1 invested. The next 20 kg N/ha applied provided a return on investment of $1.25 for every $1 invested 80% of the time, and further increases would most likely break even. The timing of N application had a minor effect on yield, oil and financial returns, but delaying N application would allow farmers to reduce risk under poor conditions by reducing or eliminating further inputs. Overall, our work demonstrates that a conservative approach to N supply mindful of the combined impacts of N on yield and oil is necessary in south-western Australia and that split and delayed applications are a viable risk-management strategy.

scholarly journals Effect of the Application Date of Fertilizer Containing Silicon and Potassium on the Yield and Technological Quality of Sugar Beet Roots

Plants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 370
Author(s):  
Arkadiusz Artyszak ◽  
Dariusz Gozdowski ◽  
Alicja Siuda
Keyword(s):  
Sugar Beet ◽  
Foliar Application ◽  
Plant Protection ◽  
Plant Protection Products ◽  
Water Shortage ◽  
The European Union ◽  
Yield Increase ◽  
Time Of Application ◽  
Technological Quality

Water shortage and drought are a growing problem in Europe. Therefore, effective methods for limiting its effects are necessary. At the same time, the “field to fork” strategy adopted by the European Commission aims to achieve a significant reduction in the use of plant protection products and fertilizers in the European Union. In an experiment conducted in 2018–2020, the effect of the method of foliar fertilization containing silicon and potassium on the yield and technological quality of sugar beet roots was assessed. The fertilizer was used in seven combinations, differing in the number and time of application. The best results were obtained by treating plants during drought stress. The better soil moisture for the plants, the smaller the pure sugar yield increase was observed. It is difficult to clearly state which combination of silicon and potassium foliar application is optimal, as their effects do not differ greatly.

scholarly journals Paclobutrazol Improves Sesame Yield by Increasing Dry Matter Accumulation and Reducing Seed Shattering Under Rainfed Conditions

2021 ◽  
Author(s):  
Muhammad Zeeshan Mehmood ◽  
Ghulam Qadir ◽  
Obaid Afzal ◽  
Atta Mohi Ud Din ◽  
Muhammad Ali Raza ◽  
...  
Keyword(s):  
Leaf Area ◽  
Seed Production ◽  
Seed Yield ◽  
Dry Matter ◽  
Biomass Accumulation ◽  
Total Biomass ◽  
Dry Matter Accumulation ◽  
Seed Shattering ◽  
Rainfed Conditions ◽  
Leaf Greenness

AbstractSeveral biotic and abiotic stresses significantly decrease the biomass accumulation and seed yield of sesame crops under rainfed areas. However, plant growth regulators (such as Paclobutrazol) can improve the total dry matter and seed production of the sesame crop. The effects of the paclobutrazol application on dry matter accumulation and seed yield had not been studied before in sesame under rainfed conditions. Therefore, a two-year field study during 2018 and 2019 was conducted with key objectives to assess the impacts of paclobutrazol on leaf greenness, leaf area, total dry matter production and partitioning, seed shattering, and seed yield of sesame. Two sesame cultivars (TS-5 and TS-3) were treated with four paclobutrazol concentrations (P0 = Control, P1 = 100 mg L−1, P2 = 200 mg L−1, P3 = 300 mg L−1). The experiment was executed in RCBD-factorial design with three replications. Compared with P0, treatment P3 improved the leaf greenness of sesame by 17%, 38%, and 60% at 45, 85, and 125 days after sowing, respectively. However, P3 treatment decreased the leaf area of sesame by 14% and 20% at 45 and 85 days after sowing than P0, respectively. Compared with P0, treatment P3 increased the leaf area by 46% at 125 days after sowing. On average, treatment P3 also improved the total biomass production by 21% and partitioning in roots, stems, leaves, capsules, and seeds by 23%, 19%, 23%, 22%, and 40%, respectively, in the whole growing seasons as compared to P0. Moreover, under P3 treatment, sesame attained the highest seed yield and lowest seed shattering by 27% and 30%, respectively, compared to P0. This study indicated that by applying the paclobutrazol concentration at the rate of 300 mg L−1 in sesame, the leaf greenness, leaf areas, biomass accumulation, partitioning, seed yield, and shatter resistance could be improved. Thus, the optimum paclobutrazol level could enhance the dry matter accumulation and seed production capacity of sesame by decreasing shattering losses under rainfed conditions.

scholarly journals Individual and Combined Effects of Planting Date, Seeding Rate, Relative Maturity, and Row Spacing on Soybean Yield

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 605
Author(s):  
Peder K. Schmitz ◽  
Hans J. Kandel
Keyword(s):  
Seed Yield ◽  
Management Practices ◽  
Synergistic Effects ◽  
Canopy Cover ◽  
Planting Date ◽  
Row Spacing ◽  
Growth Stages ◽  
Seeding Rate ◽  
Yield Increase ◽  
Beginning Of Flowering

Planting date (PD), seeding rate (SR), relative maturity (RM) of cultivars, and row spacing (RS) are primary management factors affecting soybean (Glycine max (L.) Merr.) yield. The individual and synergistic effects of PD, SR, RM, and RS on seed yield and agronomic characteristics in North Dakota were herein investigated. Early and late PD, early and late RM cultivars, two SR (408,000 and 457,000 seed ha−1), and two RS (30.5 and 61 cm) were evaluated in four total environments in 2019 and 2020. Maximizing green canopy cover prior to the beginning of flowering improved seed yield. Individual factors of early PD and narrow RS resulted in yield increase of 311 and 266 kg ha−1, respectively. The combined factors of early PD, late RM, high SR, and narrow RS improved yield by 26% and provided a $350 ha−1 partial profit over conventional practices. Canopy cover and yield had relatively weak relationships with r2 of 0.36, 0.23, 0.14, and 0.21 at the two trifoliolate, four trifoliolate, beginning of flowering, and beginning of pod formation soybean growth stages, respectively. Producers in the most northern soybean region of the USA should combine early planting, optimum RM cultivars, 457,000 seed ha−1 SR, and 31 cm RS to improve yield and profit compared to current management practices.

Increase Longleaf Pine Seed Yields by Inhibiting Conelet Abortion

1987 ◽  
Vol 11 (1) ◽  
pp. 6-9 ◽  
Author(s):  
Robert C. Hare
Keyword(s):  
Boric Acid ◽  
Seed Production ◽  
Seed Yield ◽  
Longleaf Pine ◽  
Foliar Spray ◽  
Seed Yields

Abstract A single foliar spray with either antiethylene compounds or cytokinins shortly after anthesis reduced conelet abortion by half and doubled seed production. Spraying with boric acid plus Cytex® , a relatively economical form of cytokinin derived from seaweed, was equally effective,and addition of certain antiethylene compounds further improved seed yield. South. J. Appl. For. 11(1):6-9.

Interference and Seed Production by Common Lambsquarters (Chenopodium album) in Soybeans (Glycine max)

Weed Science ◽  
1990 ◽  
Vol 38 (2) ◽  
pp. 113-118 ◽  
Author(s):  
S. Kent Harrison
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Chenopodium Album ◽  
Soybean Seed ◽  
Dry Weight ◽  
Threshold Level ◽  
Yield Reduction ◽  
Significant Treatment ◽  
Weed Biomass ◽  
Common Lambsquarters

Multiple regression and response surface plots were used to analyze the effects of common lambsquarters population density and interference duration on weed growth and soybean seed yield. Under favorable growing conditions in 1986, weed biomass production at all population densities and interference durations was four to five times that produced in 1987, under less favorable conditions. However, there was no significant treatment by year interaction for soybean seed yield reduction by common lambsquarters, and production of each kg/ha weed biomass resulted in an average soybean yield reduction of 0.26 kg/ha. Utilizing 5% yield loss as an arbitrary threshold level, the regression equation predicted a common lambsquarters density threshold of 2 plants/m of row for 5 weeks of interference after crop emergence and 1 plant/m of row for 7 weeks. Seed production by individual common lambsquarters plants was highly correlated (r=0.92) with weed dry weight, and seed production ranged from 30 000 to 176 000 seeds/plant.

INFLUENCE DES CULTIVARS ET DES STADES DE PRÉLÈVEMENT DE LA PREMIÈRE POUSSE SUR LA PRODUCTION DE SEMENCE DE TRÈFLE ROUGE

1990 ◽  
Vol 70 (4) ◽  
pp. 1071-1080 ◽  
Author(s):  
LUCIUS BELZILE
Keyword(s):  
Seed Germination ◽  
Seed Production ◽  
Seed Yield ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Kernel Weight ◽  
Climatic Conditions ◽  
Cultivar Group ◽  
Stage Of Development ◽  
Clover Seed

For five years, the effect of cultivars and vegetative stage of cutting were measured on red clover (Trifolium pratense L.) seed production. The first group of cultivars included Hungaropoli, Ottawa and Lakeland harvested in 1981 and 1982. The second group included Arlington, Florex and Prosper I harvested in 1984, 1985 and 1987. The total annual seed yield differed within cultivars and the highest seed yield was obtained with Hungaropoly and Florex. In the first cultivar group, the tetraploid Hungaropoly obtained a kernel weight higher than the diploids Lakeland and Ottawa. In the second group of cultivars, all diploids, Arlington yielded the highest kernel weight. The percentage of seed germination of Hungaropoly was higher than Lakeland and Ottawa while for Florex it was slightly higher than Arlington and Prosper I. A prior vegetative cutting is essential for good seed yield. In the absence of vegetative cutting seed weight seemed improved. The stage of development at which vegetative cutting is done has little influence on percentage seed germination. These results have shown that despite the strong effect of climatic conditions on seed production, the choice of the optimum stage for vegetative cutting and a well adapted cultivar are important aspects in successful seed production.Key words: Red clover, seed production, cultivar, stage of cutting

scholarly journals Effective Seed Yield and Flowering Synchrony of Parents of CIMMYT Three-Way-Cross Tropical Maize Hybrids

Agriculture ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 161
Author(s):  
Alberto A. Chassaigne-Ricciulli ◽  
Leopoldo E. Mendoza-Onofre ◽  
Leobigildo Córdova-Téllez ◽  
Aquiles Carballo-Carballo ◽  
Félix M. San Vicente-García ◽  
...  
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Grain Filling ◽  
Sowing Date ◽  
Planting Density ◽  
Planting Dates ◽  
Flowering Synchrony ◽  
Sowing Dates ◽  
Grain Filling Period ◽  
Hybrid Maize

Genotype, environmental temperature, and agronomic management of parents influence seed yield in three-way cross hybrid maize seed production. The objective of this research was to generate information on the seed production of six three-way cross hybrids and their progenitors, adapted to tropical lowlands. Data on days to—and duration of—flowering, distance to spike and stigmas, and seed yield of five female single crosses and five male inbred lines were recorded for different combinations of four planting densities and four sowing dates in Mexico. The effect of planting density was not significant. The male inbred line T10 was the earliest and highest seed yield and T31 the latest, occupying second place in yield. The single crosses T32/T10 and T13/T14 were the earliest and had the highest effective seed yield. At the earliest sowing date, the females were later in their flowering, accumulated fewer growing degree days (GDD), and obtained higher yields since the grain-filling period coincided with hot days and cool nights. To achieve greater floral synchronization and therefore greater production of hybrid seed, differential planting dates for parents are recommended based on information from the accumulated GDD of each parent. The three-way cross hybrids were classified according to the expected seed yield of the females and the complexity in the synchronization of flowering of their parents.

Sign in / Sign up

Export Citation Format

Share Document