Structure and genesis of the Boulder-Weld allochthon, Denver Basin, Colorado - Gravity slide or Laramide thrust sheet?

This study was undertaken to determine the structure and genesis of the Boulder-Weld allochthon (BWA), the 216 mi2 (559 km2) remnant of a once larger feature, that moved east from the flank of the Front Range into the western part of the Denver Basin. This review of surface and subsurface data revealed new aspects of the BWA, especially in its western part. There, the decollement of the BWA ramps 900 feet up-section to the east from a near bedding-parallel detachment low in the upper transition member of the Pierre Shale to a bedding-parallel detachment near the base of the Fox Hills Formation. Repeated sections found in wells east of the decollement ramp demonstrate up to two miles of translation in the system. Secondary faults in the hanging wall of the allochthon include antithetic thrusts bounding pop-up structures and occasional normal faults that almost exclusively overprint the decollement ramp. The hanging wall is also cut by a postulated tear fault separating areas exhibiting different amounts of translation. The western, trailing edge of the decollement shows attenuation in its hanging wall that increases to the west. This part of the decollement either represents a very low-angle breakaway normal fault or a thrust fault cutting slightly down-section in the direction of transport. Past studies perceived a southeast transport direction for the BWA in contrast to the northeast slip directions on nearby Laramide thrusts, a difference used to interpret the allochthon as a gravity slide. However, similar east-west oriented slickenlines on thrusts across the western part of the allochthon and into the neighboring Front Range leave open the possibility the BWA originated as a Laramide thrust sheet. Furthermore, both the BWA and Laramide thrusts in the neighboring Front Range utilized detachments near the top of the Pierre Shale, suggesting a possible common genesis. Given the available data, both the gravity slide and Laramide thrust models provide viable explanations for the BWA.

Download Full-text

Basement-involved inversion at the Appalachian structural front, western Newfoundland: an interpretation of seismic reflection data with implications for petroleum prospectivity

Bulletin of Canadian Petroleum Geology ◽

10.2113/52.3.215 ◽

2004 ◽

Vol 52 (3) ◽

pp. 215-233 ◽

Cited By ~ 11

Author(s):

Glen S. Stockmal ◽

Art Slingsby ◽

John W.F. Waldron

Keyword(s):

Seismic Reflection ◽

Hanging Wall ◽

Normal Fault ◽

Hydrocarbon Exploration ◽

Normal Faults ◽

Apparent Magnitude ◽

Seismic Reflection Data ◽

The Public ◽

Reflection Data ◽

New Interpretation

Abstract Recent hydrocarbon exploration in western Newfoundland has resulted in six new wells in the Port au Port Peninsula area. Port au Port No.1, drilled in 1994/95, penetrated the Cambro-Ordovician platform and underlying Grenville basement in the hanging wall of the southeast-dipping Round Head Thrust, terminated in the platform succession in the footwall of this basement-involved inversion structure, and discovered the Garden Hill petroleum pool. The most recent well, Shoal Point K-39, was drilled in 1999 to test a model in which the Round Head Thrust loses reverse displacement to the northeast, eventually becoming a normal fault. This model hinged on an interpretation of a seismic reflection survey acquired in 1996 in Port au Port Bay. This survey is now in the public domain. In our interpretation of these data, the Round Head Thrust is associated with another basement-involved feature, the northwest-dipping Piccadilly Bay Fault, which is mapped on Port au Port Peninsula. Active as normal faults in the Taconian foreland, both these faults were later inverted during Acadian orogenesis. The present reverse offset on the Piccadilly Bay Fault was previously interpreted as normal offset on the southeast-dipping Round Head Thrust. Our new interpretation is consistent with mapping on Port au Port Peninsula and north of Stephenville, where all basement-involved faults are inverted and display reverse senses of motion. It also explains spatially restricted, enigmatic reflections adjacent to the faults as carbonate conglomerates of the Cape Cormorant Formation or Daniel’s Harbour Member, units associated with inverted thick-skinned faults. The K-39 well, which targeted the footwall of the Round Head Thrust, actually penetrated the hanging wall of the Piccadilly Bay Fault. This distinction is important because the reservoir model invoked for this play involved preferential karstification and subsequent dolomitization in the footwalls of inverted thick-skinned faults. The apparent magnitude of structural inversion across the Piccadilly Bay Fault suggests other possible structural plays to the northeast of K-39.

Download Full-text

Hurricane Fault

Geosites ◽

10.31711/geosites.v1i1.51 ◽

2019 ◽

Vol 1 ◽

pp. 1-12

Author(s):

Robert Biek

Keyword(s):

East Coast ◽

Hanging Wall ◽

Grand Canyon ◽

Normal Fault ◽

Local Area ◽

Fault Scarp ◽

Normal Faults ◽

Slip Rates ◽

The Town

The Hurricane fault is the big earthquake fault in southwestern Utah. It stretches at least 155 miles (250 km) from south of the Grand Canyon northward to Cedar City and is capable of producing damaging earthquakes of about magnitude 7.0. The Hurricane fault is a “normal” fault, a type of fault that forms during extension of the earth’s crust, where one side of the fault moves down relative to the other side. In this case, the down-dropped side (the hanging wall) is west of the fault; the upthrown side (the footwall) lies to the east. Like most long normal faults, the Hurricane fault is composed of discrete segments that tend to rupture independently (figure 1). The fault lies at or near the base of the Hurricane Cliffs, which form an impressive, little-eroded fault scarp several hundred feet high. Conspicuous, west-tilted, faulted slivers of mostly Triassic and Jurassic red beds are locally exposed at the base of the cliffs, and contrast strongly with gray Permian carbonates exposed in the cliffs themselves. Several Pleistocene basaltic lava flows flowed across and are now offset by the fault zone, dramatically recording long-term slip rates. Should you make the mistake of pronouncing the name “Hurricane” as one would when describing a mighty storm on the East Coast, you should stand to be corrected, for locals pronounce it as “Hurricun” even though pioneers named the town after ferocious winds common to the local area.

Download Full-text

Descriptive text to the Geological map of Greenland, 1:100 000, Kilen 81 Ø.1 Syd

Geological Survey of Denmark and Greenland Bulletin ◽

10.34194/geusb.v8.4526 ◽

2018 ◽

pp. 1-29

Author(s):

Kristian Svennevig ◽

Peter Alsen ◽

Pierpaolo Guarnieri ◽

Jussi Hovikoski ◽

Bodil Wesenberg Lauridsen ◽

...

Keyword(s):

Hanging Wall ◽

Field Work ◽

Normal Faults ◽

The South ◽

Thrust Sheet ◽

Basin Inversion ◽

North East ◽

The North ◽

Geological Map ◽

Surrounding Areas

The geological map sheet of Kilen in 1:100 000 scale covers the south-eastern part of the Carboniferous– Palaeogene Wandel Sea Basin in eastern North Greenland. The map area is dominated by the Flade Isblink ice cap, which separates several minor isolated landmasses. On the semi-nunatak of Kilen, the map is mainly based on oblique photogrammetry and stratigraphical field work while in Erik S. Henius Land, Nordostrundingen and northern Amdrup Land the map is based on field data collected during previous, 1:500 000 scale regional mapping. Twenty-one Palaeozoic–Mesozoic mappable units were identified on Kilen, while the surrounding areas comprise the Late Cretaceous Nakkehoved Formation to the north-east and the Late Carboniferous Foldedal Formation to the south-west. On Kilen, the description of Jurassic–Cretaceous units follows a recently published lithostratigraphy. The Upper Palaeozoic–lowermost Cretaceous strata comprise seven formations and an informal mélange unit. The overlying Lower–Upper Cretaceous succession comprises the Galadriel Fjeld and Sølverbæk Formations, which are subdivided into six and five units, respectively. In addition, the Quaternary Ymer Formation was mapped on south-east Kilen. The Upper Palaeozoic to Mesozoic strata of Kilen are faulted and folded. Several post-Coniacian NNW–SSE-trending normal faults are identified and found to be passively folded by a later N–S compressional event. A prominent subhorizontal fault, the Central Detachment, separates two thrust sheets, the Kilen Thrust Sheet in the footwall and the Hondal Elv Thrust Sheet in the hanging wall. The style of deformation and the structures found on Kilen are caused by compressional tectonics resulting in post-extensional, presumably Early Eocene, folding and thrusting and basin inversion. The structural history of the surrounding areas and their relation to Kilen await further studies.

Download Full-text

Eastern Boulder-Weld fault zone, Colorado: A gravity slide with pop-up structures

The Mountain Geologist ◽

10.31582/rmag.mg.57.3.177 ◽

2020 ◽

Vol 57 (3) ◽

pp. 177-198

Author(s):

Richard H. Groshong ◽

Ken Kittleson

Keyword(s):

Fault Zone ◽

Cross Sections ◽

Upper Cretaceous ◽

Sedimentary Rocks ◽

Detailed Examination ◽

Contour Map ◽

Pierre Shale ◽

Structural Style ◽

Transport Direction ◽

Gravity Slide

The Boulder-Weld fault zone, located southeast of Boulder, Colorado, is about 10 km (6 mi) wide, 34 km (21 mi) long, and involves at least 335 m (1100 ft) of upper Cretaceous sedimentary rocks. It affects the Cretaceous upper Pierre Shale, Fox Hills Sandstone, and the coal–bearing lower Laramie Formation. This study is a detailed examination of the eastern portion of the fault zone which consists of undisturbed areas separated by three long, narrow, fault-bounded uplifts that have received a variety of interpretations over the years. The fault zone geometry is determined from 21 closely spaced cross sections that use more subsurface data than previous studies, incorporate the elevations of the major economic coal seam derived from a published composite structure-contour map, and are area balanced using area-depth-strain (ADS) analysis. The most common structural style is a pop-up structure in which the uplifts are bounded on both sides by reverse faults. At larger-displacement the pop-ups are at the tip of the ramp and a second fault has formed close to the base of the ramp. A few sections show simple ramp anticlines developed above listric thrusts. The lower detachment for all structures is the distinctive Kp2 marker in the upper Pierre Shale. ADS analysis of the best-controlled uplifts shows that the uplifts are area balanced and confirms the lower detachment to be near Kp2. The structures are interpreted to have formed as a gravity slide because they formed in a break-back sequence, a characteristic of gravity gliding, and because the transport direction is approximately down the current southeast dip of the Kp2 detachment.

Download Full-text

Descriptive text to the Geological map of Greenland, 1:100 000, Kilen 81 Ø.1 Syd

Geological Survey of Denmark and Greenland Bulletin ◽

10.34194/geusm.v8.4526 ◽

2018 ◽

pp. 1-29

Author(s):

Kristian Svennevig ◽

Peter Alsen ◽

Pierpaolo Guarnieri ◽

Jussi Hovikoski ◽

Bodil Wesenberg Lauridsen ◽

...

Keyword(s):

Hanging Wall ◽

Field Work ◽

Normal Faults ◽

The South ◽

Thrust Sheet ◽

Basin Inversion ◽

North East ◽

The North ◽

Geological Map ◽

Surrounding Areas

NOTE: This Map Description was published in a former series of GEUS Bulletin. Please use the original series name when citing this series, for example: Svennevig, K., Alsen, P., Guarnieri, P., Hovikoski, J., Wesenberg Lauridsen, B., Krarup Pedersen, G., Nøhr-Hansen, H., & Sheldon, E. (2018). Descriptive text to the Geological map of Greenland, 1:100 000, Kilen 81 Ø.1 Syd. Geological Survey of Denmark and Greenland Map Series 8, 1-29. https://doi.org/10.34194/geusm.v8.4526 _______________ The geological map sheet of Kilen in 1:100 000 scale covers the south-eastern part of the Carboniferous–Palaeogene Wandel Sea Basin in eastern North Greenland. The map area is dominated by the Flade Isblink ice cap, which separates several minor isolated landmasses. On the semi-nunatak of Kilen, the map is mainly based on oblique photogrammetry and stratigraphical field work while in Erik S. Henius Land, Nordostrundingen and northern Amdrup Land the map is based on field data collected during previous, 1:500 000 scale regional mapping. Twenty-one Palaeozoic–Mesozoic mappable units were identified on Kilen, while the surrounding areas comprise the Late Cretaceous Nakkehoved Formation to the north-east and the Late Carboniferous Foldedal Formation to the south-west. On Kilen, the description of Jurassic–Cretaceous units follows a recently published lithostratigraphy. The Upper Palaeozoic–lowermost Cretaceous strata comprise seven formations and an informal mélange unit. The overlying Lower–Upper Cretaceous succession comprises the Galadriel Fjeld and Sølverbæk Formations, which are subdivided into six and five units, respectively. In addition, the Quaternary Ymer Formation was mapped on south-east Kilen. The Upper Palaeozoic to Mesozoic strata of Kilen are faulted and folded. Several post-Coniacian NNW–SSE-trending normal faults are identified and found to be passively folded by a later N–S compressional event. A prominent subhorizontal fault, the Central Detachment, separates two thrust sheets, the Kilen Thrust Sheet in the footwall and the Hondal Elv Thrust Sheet in the hanging wall. The style of deformation and the structures found on Kilen are caused by compressional tectonics resulting in post-extensional, presumably Early Eocene, folding and thrusting and basin inversion. The structural history of the surrounding areas and their relation to Kilen await further studies.

Download Full-text

Eocene exhumation and extensional basin formation in the Copper Mountains, Nevada, USA

Geosphere ◽

10.1130/ges02101.1 ◽

2019 ◽

Vol 15 (5) ◽

pp. 1577-1597

Author(s):

Andrew S. Canada ◽

Elizabeth J. Cassel ◽

Allen J. McGrew ◽

M. Elliot Smith ◽

Daniel F. Stockli ◽

...

Keyword(s):

Hanging Wall ◽

Normal Fault ◽

High Elevation ◽

Late Eocene ◽

Closure Temperature ◽

Coarse Grained ◽

Normal Faults ◽

Extensional Deformation ◽

Early Oligocene ◽

Basin Formation

Abstract Within extended orogens, records that reflect the driving processes and dynamics of early extension are often overprinted by subsequent orogenic collapse. The Copper Mountains of northeastern Nevada preserve an exceptional record of hinterland extensional deformation and high-elevation basin formation, but current geochronology and thermochronology are insufficient to relate this to broader structural trends in the region. This extension occurred concurrent with volcanism commonly attributed to Farallon slab removal. We combine thermochronology of both synextensional hanging-wall strata and footwall rocks to comprehensively evaluate the precise timing and style of this deformation. Specifically, we apply (U-Th)/(He-Pb) double dating of minerals extracted from Eocene–Oligocene Copper Basin strata with multi-mineral (U-Th)/He and 40Ar/39Ar thermochronology of rocks sampled across an ∼20 km transect of the Copper Mountains. We integrate basement and detrital thermochronology records to comprehensively evaluate the timing and rates of hinterland extension and basin sedimentation. Cooling and U-Pb crystallization ages show the Coffeepot Stock, which spans the width of the Copper Mountains, was emplaced at ca. 109–108 Ma, and then cooled through the 40Ar/39Ar muscovite and biotite closure temperatures by ca. 90 Ma, the zircon (U-Th)/He closure temperature between ca. 90 and 70 Ma, and the apatite (U-Th)/He closure temperature between 43 and 40 Ma. Detrital apatite and zircon (U-Th)/(He-Pb) double dating of late Eocene fluvial and lacustrine strata of the Dead Horse Formation and early Oligocene fluvial strata of the Meadow Fork Formation, both deposited in Copper Basin, shows that Early Cretaceous age detrital grains have a cooling history that is analogous to proximal intrusive rocks of the Coffeepot Stock. At ca. 38 Ma, cooling and depositional ages for Copper Basin strata reveal rapid exhumation of proximal source terranes (cooling rate of ∼37 °C/m.y.); in these terranes, 8–12 km of slip along the low-angle Copper Creek normal fault exhumed the Coffeepot Stock in the footwall. Late Eocene–early Oligocene slip along this fault and an upper fault splay, the Meadow Fork fault, created a half graben that accommodated ∼1.4 km of volcaniclastic strata, including ∼20 m of lacustrine strata that preserve the renowned Copper Basin flora. Single-crystal sanidine 40Ar/39Ar geochronology of interbedded tuffs in Copper Basin constrains the onset of rapid exhumation to 38.0 ± 0.9 Ma, indicating that surface-breaching extensional deformation was coincident with intense proximal volcanism. Coarse-grained syndeformational sediments of the Oligocene Meadow Fork Formation were deposited just prior to formation of an extensive regional Oligocene–Miocene unconformity and represent one of the most complete hinterland stratigraphic records of this time. We interpret this history of rapid late Eocene exhumation across the Copper Mountains, coeval volcanism, and subsequent unconformity formation to reflect dynamic and thermal effects associated with Farallon slab removal. The final phase of extension is recorded by late, high-angle normal faults that cut and rotate the early middle Miocene Jarbidge Rhyolite sequence, deposited unconformably in the hanging wall. These results provide an independent record of episodic Paleogene to Miocene exhumation documented in Cordilleran metamorphic core complexes and establish that substantial extension occurred locally in the hinterland prior to province-wide Miocene extensional break-up.

Download Full-text

Structural characterization of fault damage zones in carbonates (Central Apennines, Italy)

10.5194/egusphere-egu21-1525 ◽

2021 ◽

Author(s):

Miriana Chinello ◽

Michele Fondriest ◽

Giulio Di Toro

Keyword(s):

Fault Zone ◽

Hanging Wall ◽

Damage Zone ◽

Normal Fault ◽

Vertical Displacement ◽

Fault System ◽

Normal Faults ◽

Central Apennines ◽

Fault Surface ◽

Fracture Intensity

The Italian Central Apennines are one of the most seismically active areas in the Mediterranean (e.g., L&#8217;Aquila 2009, Mw 6.3 earthquake). The mainshocks and the aftershocks of these earthquake sequences propagate and often nucleate in fault zones cutting km-thick limestones and dolostones formations. An impressive feature of these faults is the presence, at their footwall, of few meters to hundreds of meters thick damage zones. However, the mechanism of formation of these damage zones and their role during (1) individual seismic ruptures (e.g., rupture arrest), (2) seismic sequences (e.g., aftershock evolution) and (3) seismic cycle (e.g., long term fault zone healing) are unknown. This limitation is also due to the lack of knowledge regarding the distribution, along strike and with depth, of damage with wall rock lithology, geometrical characteristics (fault length, inherited structures, etc.) and kinematic properties (cumulative displacement, strain rate, etc.) of the associated main faults.Previous high-resolution field structural surveys were performed on the Vado di Corno Fault Zone, a segment of the ca. 20 km long Campo Imperatore normal fault system, which accommodated ~ 1500 m of vertical displacement (Fondriest et al., 2020). The damage zone was up to 400 m thick and dominated by intensely fractured (1-2 cm spaced joints) dolomitized limestones with the thickest volumes at fault oversteps and where the fault cuts through an older thrust zone. Here we describe two minor faults located in the same area (Central Apennines), but with shorter length along strike. They both strike NNW-SSE and accommodated a vertical displacement of ~300 m.The Subequana Valley Fault is about 9 km long and consists of multiple segments disposed in an en-echelon array. The fault juxtaposes pelagic limestones at the footwall and quaternary deposits at the hanging wall. The damage zone is < 25 m &#160;thick &#160;and comprises fractured (1-2 cm spaced joints) limestones beds with decreasing fracture intensity moving away from the master fault. However, the damage zone thickness increases up to &#8764;100 m in proximity of subsidiary faults striking NNE-SSW. The latter could be reactivated inherited structures.The Monte Capo di Serre Fault is about 8 km long and characterized by a sharp ultra-polished master fault surface which cuts locally dolomitized Jurassic platform limestones. The damage zone is up to 120 m thick and cut by 10-20 cm spaced joints, but it reaches an higher fracture intensity where is cut by subsidiary, possibly inherited, faults striking NNE-SSW.Based on these preliminary observations, faults with similar displacement show comparable damage zone thicknesses. The most relevant damage zone thickness variations are related to geometrical complexities rather than changes in lithology (platform vs pelagic carbonates). &#160;In particular, the largest values of damage zone thickness and fracture intensity occur at fault overstep or are associated to inherited structures. The latter, by acting as strong or weak barriers (sensu Das and Aki, 1977) during the propagation of seismic ruptures, have a key role in the formation of damage zones and the growth of normal faults.

Download Full-text

Exhumation history of the Lomas de Olmedo basin: constraining multi-phase deformation using low-temperature thermochronology

10.5194/egusphere-egu21-12429 ◽

2021 ◽

Author(s):

Willemijn S.M.T. van Kooten ◽

Edward R. Sobel ◽

Cecilia del Papa ◽

Patricio Payrola ◽

Alejandro Bande ◽

...

Keyword(s):

Low Temperature ◽

Late Miocene ◽

Hanging Wall ◽

Normal Fault ◽

Fault Reactivation ◽

Normal Faults ◽

Northwestern Part ◽

Rift Basin ◽

The South ◽

Northern Margin

The Cretaceous period in NW Argentina is dominated by the formation of the Salta rift basin, an intracontinental rift basin with multiple branches extending from the central Salta-Jujuy High. One of these branches is the ENE-WSW striking Lomas de Olmedo sub-basin, which hosts up to 5 km of syn- and post-rift deposits of the Salta Group, accommodated by substantial throw along SW-NE striking normal faults and subsequent thermal subsidence during the Cretaceous-Paleogene. Early compressive movement in the Eastern Cordillera led to the formation of a foreland basin setting that was further dissected in the Neogene by the uplift of basement-cored ranges. As a consequence, the northwestern part of the Lomas de Olmedo sub-basin was disconnected from the Andean foreland and local depocenters such as the Cianzo basin were formed, whereas the eastern sub-basin area is still part of the Andean foreland. Thus, the majority of the Salta Group to the east is located in the subsurface and has been extensively explored for petroleum, while in northwestern part of the sub-basin, the Salta Group is increasingly deformed and is fully exposed in the km-scale Cianzo syncline of the Hornocal ranges. The SW-NE striking Hornocal fault delimits the Cianzo basin to the south and the Cianzo syncline to the north. During the Cretaceous, it formed the northern margin of the Lomas de Olmedo sub-basin, which is indicated by an increasing thickness of the syn-rift deposits towards the Hornocal fault, as well as a lack of syn-rift deposits on the footwall block. Structural mapping and unpublished apatite fission track (AFT) data show that the Hornocal normal fault was reactivated and inverted during the Miocene. Although structural and sedimentary features of the Cianzo basin infill provide information about the relative timing of fault activity, there is a lack of low-temperature thermochronology. Herein, we aim to constrain the exhumation of the Lomas de Olmedo sub-basin during the Cretaceous rifting phase, as well as the onset and magnitude of fault reactivation in the Miocene. We collected 74 samples for low-temperature thermochronology along two major NW-SE transects in the Cianzo basin and adjacent areas. Of these samples, 59 have been analyzed using apatite and/or zircon (U-Th-Sm)/He thermochronology (AHe, ZHe). Furthermore, 49 samples have been prepared for AFT analysis. The ages are incorporated in thermo-kinematic modelling using Pecube in order to test the robustness of uplift and exhumation scenarios. On the hanging wall block of the N-S striking east-vergent Cianzo thrust north of the Hornocal fault, Jurassic ZHe ages are attributed to pre-Salta Group exhumation. However, associated thrusts to the south show ZHe ages as young as Eocene-Oligocene, which might indicate early post-rift activity along those thrusts. AHe data from the Cianzo syncline show a direct age-elevation relationship with Late Miocene-Pliocene cooling ages, indicating the onset of rapid exhumation along the Hornocal fault in the Miocene. This is consistent with regional data and suggests that pre-existing extensional structures were reactivated during Late Miocene-Pliocene compressive movement within this part of the Central Andes.

Download Full-text

Bivergent extension in the overriding plate above a slab tear (Dodecanese, Greece)

10.5194/egusphere-egu2020-3167 ◽

2020 ◽

Author(s):

Bernhard Grasemann ◽

David A. Schneider ◽

Konstantinos Soukis ◽

Vincent Roche

Keyword(s):

Eastern Mediterranean ◽

Hanging Wall ◽

Finite Extension ◽

Normal Fault ◽

Vertical Axis ◽

Normal Faults ◽

Low Grade ◽

Thrust Belt ◽

Fold And Thrust Belt ◽

Variscan Basement

Tearing in the Hellenic slab below the transition between the Aegean and Anatolian plate is considered to have significantly affected Miocene tectonic and magmatic evolution of the eastern Mediterranean by causing a toroidal flow of asthenosphere and a lateral gradient of extension in the upper plate. Some studies suggest that this lateral gradient is accommodated by a distributed sinistral lithospheric-scale shear zone whereas other studies favor a localized NE-SW striking transfer zone. Recent studies in the northern Dodecanese demonstrate that the transition zone between the Aegean and Anatolian plate is characterized by Miocene extension with a constant NNE-SSW sense of shear accommodating the difference in finite extension rates in the middle-lower crust. Neither localized or distributed strike-slip faults nor rotation of blocks about a vertical axis have been observed. In this work we focus on the geology Kalymnos located in the central Dodecanese. Based on our new geological map, three major tectonic units can be distinguished: (i) Low-grade, fossil-rich late Paleozoic marbles, which have been deformed into S-vergent folds and out-of-sequence thrusts. This fold-and-thrust belt is sealed by an up to 200 m thick wildflysch-type deposit consisting of low-grade metamorphic radiolarites and conglomerates with tens of meters-scale marbles and ultramafics blocks. (ii) Above this unit, amphibolite facies schists, quartzites and amphibolites are tectonically juxtaposed along a several meter-thick thrust fault with low-grade ultramylonites and cohesive ultracataclasites/pseudotachylites with top-to-N kinematics. (iii) At highest structural levels, a major cataclastic low-angle normal fault zone localized in Verrucano-type violet slates separates Mesozoic unmetamorphosed limestones in the hanging wall. The sense of shear of the normal fault is top-to-SSW. All units are cut by brittle high-angle normal faults shaping the geomorphology of Kalymnos, which is characterized by three major NNW-SSE trending graben systems. New white mica Ar-Ar ages suggests that the middle units represent relics of a Variscan basement, which was thrusted on top of a fold-and-thrust belt during an Eo-Cimmerian event. Zircon (U-Th)/He ages from the Variscan basement are c. 28 Ma, indicating that the lower units were exhumed below the Mesozoic carbonates during the Oligocene-Miocene. Since Miocene extension in the northern Dodecanese records top-to-NNE kinematics, we suggest that back-arc extension in the whole Aegean realm and transition to the Anatolian plate is bivergent, and tearing in the Hellenic slab did not significantly affected the extension pattern in the upper crust.

Download Full-text

Quantitative analysis of fault and fold growth in a salt-bearing transtensional basins: the Sørvestsnaget Basin, Western Barents Sea

Geological Society London Special Publications ◽

10.1144/sp495-2020-123 ◽

2020 ◽

pp. SP495-2020-123

Author(s):

Thomas B. Kristensen ◽

Atle Rotevatn ◽

Maria Marvik ◽

Gijs A. Henstra ◽

Rob L. Gawthorpe ◽

...

Keyword(s):

Barents Sea ◽

Hanging Wall ◽

Structural Evolution ◽

Normal Fault ◽

Growth Patterns ◽

Hydrocarbon Exploration ◽

Normal Faults ◽

Lateral Migration ◽

Seismic Reflection Data ◽

Economic Implications

AbstractThe growth of faults and folds in basins formed under transtension has been less studied than in their extensional counterparts. In this study, we capitalise on 3D seismic reflection data to investigate the evolution of faults and folds that evolved coevally during sub-orthogonal partitioned extension and shortening, respectively, in the Sørvestsnaget Basin, Western Barents Sea. We use quantitative techniques to constrain the distribution of normal fault throw, shortening accommodated by folds and thrusts, and stratigraphic thickness variations, to analyse the relative temporal and spatial evolution of faults and folds. Our results show that normal faults display a similar evolution to those occurring in extensional basins, where they grew by lateral- and dip-linkage of individual fault segments as well as upward propagation. Notably, we show that shortening-related fold growth affected the fault growth patterns, skewing their throw distributions, and shifting the location of accommodation away from the evolving folds. Thus, fold amplification caused lateral migration of normal fault hanging-wall depocentres. Our results shed new light on fault and fold growth processes in transtensional basins and contributes to an improved understanding of the structural evolution of basins forming along sheared continental margins, which has economic implications for sheared-margin basins targeted for hydrocarbon exploration.

Download Full-text