scholarly journals Evaluation and storage studies of sausage roll produced from wheat-tigernut flour blends

2020 ◽  
Vol 14 (3-4) ◽  
pp. 82-90
Author(s):  
Emmanuel Kehinde Oke ◽  
Michael Ayodele Idowu ◽  
Abiodun Aderoju Adeola ◽  
Temitope Omuwumi Abiola ◽  
Ibrahim Ololade Adeniji
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Pasting Properties ◽  
Peak Time ◽  
Viscosity Data ◽  
Crude Fibre ◽  
Baked Products ◽  
Flour Blends ◽  
And Storage ◽  
Range Test

This study was carried out to investigate the effects of wheat flour substitution with tigernut flour. Brown variety of tigernut was sorted and dried in a cabinet dryer at 60°C for 72hrs and was processed into flour and blended with wheat flour at different ratios of 100:0; 90:10; 80:20; 70:30; 60:40; 50:50, 40:60, 30:70, 20:80, 10:90 respectively. The flour blends were analyzed for proximate composition, functional properties, pasting properties and rheological properties (viscosity). Data obtained were subjected to analysis of variance and significant means were separated using Duncan multiple range test. Moisture, crude protein, crude fibre, total ash, crude fat and carbohydrate ranged from 4.11 to 10.35%, 4.72 to 12.28%, 2.82 to 9.81%, 0,51 to 0.78%, 0.84 to 15.61% and 50.26 to 73.25% respectively. Significant differences exist in the functional, pasting properties and viscosity of wheat and tigernut flour blends. As the substitution of tigernut flour increases, the hardness, crust and crumb moisture of the sausage increases during storage. The result of this study shows that tigernut has the advantage of improving the crude fat, total ash and crude fibre of the blends. Substitution of tigernut flour to wheat flour had a significant effect on all the functional properties of the flour blends. The pasting properties of wheat and tigernut flour blends were affected thereby leading to decreases in the peak, trough, breakdown, final viscosity, setback and peak time. The viscosity of wheat and tigernut flour blends is relatively too high and this suggests that the flour blends will be useful in production of baked products.

scholarly journals The Evaluation of Pasting Properties of Whole Wheat and Whole Green Plantain Flour Blends and Quality Characteristics of Crackers Made from the Blends

2020 ◽  
Vol 2 (5) ◽  
Author(s):  
U. E. Inyang ◽  
V. P. Elijah
Keyword(s):  
Wheat Flour ◽  
Nutritive Value ◽  
Control Sample ◽  
Pasting Properties ◽  
Crude Fibre ◽  
Whole Wheat Flour ◽  
Overall Acceptability ◽  
Substitution Level ◽  
Whole Wheat ◽  
Flour Blends

The demand for food products with functional attributes is on the increase worldwide. The present study was aimed at evaluating the effect of supplementing whole wheat flour with 0, 10, 20, 30, 40 and 50% whole green plantain flour on pasting properties of the flour blends, proximate composition, minerals and sensory characteristics of crackers made from the blends. The 100% whole wheat flour served as the control sample. The result showed that the peak viscosity (PV), trough viscosity (TV), breakdown viscosity (BDV), final viscosity (FV) and setback viscosity (SBV) were significantly affected by the level of plantain flour substitution. The 20% plantain flour substitution level recorded the minimum PV (264.00RVU), TV (248.00RVU), FV (531.00RVU) and SBV (263.00RVU) while the 50% plantain flour substituted blend recorded the highest PV (362.00RVU), TV (328.00RVU) and FV (603.00RVU). The control sample recorded the highest SBV (312.00RVU) and least BDV (3.00RVU). The peak times for all the blended samples were the same (7 min) while the time for the control sample was 5 min. There was insignificant difference (P>0.05) in the pasting temperature which ranged from 91.30 – 92.80oC. The crude protein, fat and calcium contents progressively decreased while the ash, crude fibre, carbohydrate, K, Mg, Fe and Zn contents in the prepared crackers progressively increased with increase in the proportion of plantain flour substitution. Cracker prepared from the blend of 80% whole wheat and 20% whole green plantain flours was the most preferred by the sensory evaluation panellists in terms of taste, texture and overall acceptability. It is evident from the study that acceptable crackers of enhanced nutritive value could be produced from blend of 80% whole wheat and 20% whole green plantain flours. The use of flour from unpeeled plantain as ingredient in cracker production would eliminate waste generation and its associated environmental problems.

scholarly journals Chemical, Pasting and Sensory Characteristics of Ukpo oka - A Steamed Maize Pudding Formulated From Maize and African Yam Bean Flour

2020 ◽  
Vol 39 (01) ◽  
Author(s):  
Anosike Francis Chidi ◽  
Nwagu Kingsley Ekene ◽  
Ekwu Francis ◽  
Nweke Friday Nwalo ◽  
Nwoba Sunday Theophilus ◽  
...  
Keyword(s):  
Functional Properties ◽  
Pasting Properties ◽  
Sensory Attributes ◽  
Absorption Capacity ◽  
Peak Time ◽  
African Yam Bean ◽  
Bean Flour ◽  
Emulsion Capacity ◽  
Yam Flour ◽  
Flour Blends

Studies were conducted on the chemical, functional, pasting properties of the flour blends and sensory properties of ukpo oka formulated from of maize- African yam bean flour (AYBF) in order to improve the nutritional content of maize and encourage a wider utilization of the legume AYB. Supplementation of maize and African yam flour was done at 100:0, 50:50, 80:20, 60:40 and 20:80 maize: African yam bean flour, respectively. Proximate composition, functional properties, pasting properties of the flour blends was determined and sensory attributes of the products were also evaluated. The result showed that supplementation of maize with African yam bean flour significantly increased the protein, ash and fiber content of the flour blends with values ranging from 3.91 - 11.08%, 2.90 - 6.60%, 0.67 - 1.82% for protein, ash and fiber contents respectively. The protein, ash and fiber contents increased with addition of African yam bean flour while carbohydrate content of maize- African yam bean blends decreased with increase in the level of African yam bean. The values for functional properties ranged from 0.72 – 0.82g/ml, 99.33 – 323.33%, 9.01 – 19.65%, 690.00 - 978.33%, 0.67 – 1.13%, 0.484 – 1.038% for bulk density, foaming capacity, emulsion capacity, swelling capacity, water absorption capacity and oil absorption capacity respectively. Values for pasting properties of the flour blends expressed in rapid visco unit (RVU) ranges from 129.25 – 209.40, 22.55 – 67.93, 60.21 – 124.62 , 145.25 – 247.67 , 83.37 – 84.56 , 5.47 – 5.97 and 87.19 – 141.35 for peak viscosity, break down viscosity, set back viscosity, final viscosity, pasting temperature, peak time and trough respectively. Set back viscosity and final viscosity increased with increase in the levels of African yam bean while break down viscosity decrease with the increase in the levels of African yam bean. The products were highly rated in all sensory attributes evaluated however aroma decreases with increase in the levels of AYBF. Product made from flour blend 50:50 was the most preferred in terms of general acceptability.

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Quality Assessment of Weaning Food from Blends of Sorghum, Mung Beans and Orange Fleshed Sweet Potato Blends

2020 ◽  
pp. 42-52
Author(s):  
H. T. Olaleye ◽  
T. O. Oresanya ◽  
E. O. Temituro
Keyword(s):  
Sweet Potato ◽  
Crude Protein ◽  
Proximate Analysis ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Peak Time ◽  
Weaning Food ◽  
Crude Fibre ◽  
Flour Blends ◽  
Orange Fleshed Sweet Potato

Prevalence of Malnutrition continues to be a plague ravaging children all over the world especially in developing countries such as Nigeria. Development of inexpensive, nutritious and readily available foods can mitigate against the challenges of malnutrition. Objective: To investigate the effect of different formulations of sorghum, mung beans and orange fleshed sweet potato flour blends on the proximate, functional, pasting properties and the sensory attributes of the weaning food blends. Methodology: Weaning foods were formulated from Sorghum grains (S), Mung beans (M) and (O) Orange fleshed sweet potato in ratios 40:45:15, 40:30:30, 25:35:45, 25:45:30 and 55:30:15 respectively. The blends of the weaning food were analyzed for the proximate, functional, pasting properties and sensory evaluation using standard methods. Data obtained were subjected to analysis of variance and means were separated using Duncan’s multiple range test p<0.05. Results: The proximate analysis of the blends had moisture content (8.15-9.58%), crude fat (1.47-2.76%), crude protein (14.00-18.04%), crude fibre (0.34-0.82%), total ash (1.86-2.52%) and carbohydrate (68.02-73.62%). Functional analysis: Bulk density 0.55-0.65 (g/cm3), swelling power (4.64-7.13%), solubility index (4.00-16.50%), water absorption capacity 1.58 (g/gcm3). Pasting: Peak viscosity: (87-214), Break-down viscosity (64-142), Trough viscosity (16-72), Final viscosity (50-175), Set back (28-103), Peak time (4.4.6 min), Pasting temperature (70.83°C). Blend S:M:O- 40:30:30 was rated most acceptable for all the parameters accessed. Conclusion: The blends of the weaning food showed that it can be a good source of carbohydrate, crude protein, minerals with low bulkiness and good reconstitution properties which can be used to solve malnutrition challenges in Nigeria.

Exploring the possibilities of some selected flour blends for the development of bakery products: Comparison with some physicochemical and functional properties of wheat flour

2021 ◽  
pp. 108201322110627
Author(s):  
Fabian Ugwuona ◽  
Anthony Ukom ◽  
Bridget Ejinkeonye ◽  
Nwamaka Obeta ◽  
Maureen Ojinnaka
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Potato Starch ◽  
Pasting Properties ◽  
Soy Flour ◽  
Bakery Products ◽  
Nutritional Properties ◽  
B Values ◽  
Flour Blends ◽  
Physicochemical And Functional Properties

This study explored the possibilities of some selected flour blends vis-a-vis the physicochemical and functional properties of wheat flour. Ten flour blends from potato starch, cassava, maize and soybean flours and wheat flour were made and evaluated for physicochemical, functional and anti-nutritional properties. The range of proximate values were for moisture (3.76%–6.67%), protein (4.33–8.96%), ash (1.35–1.96%), fat (3.37–4.88%), fibre (1.22–1.89%) and carbohydrate (78.35–84.94%), whereas wheat flour had moisture (9.45%), protein (11.31%), ash (2.54%), fat (3.78%), fibre (1.31%) and carbohydrate (73.90%). Cyanogenic glucoside, saponion and tannin contents increased with increase substitution of cassava and soybean flours. Pasting temperatures of flour blends ranged from 69.03°C to 78.83°C, while wheat flour had 78.05°C. Peak, hot paste, breakdown, setback and cold paste viscosities were 1514–2822, 1036–1597, 487–1225, 580–884 and 1616–2461 cp in flour blends compared to 2361, 1360, 1001, 1079 and 2439 cp of wheat flour. Substitutions with soy flour decreased the peak, hot paste, breakdown and cold paste viscosities but increased the pasting temperatures. L*, a* and b* values ranged from 78.56 to 87.65, −0.34 to 0.71 and 10. 95 to 13.50 in flour blends while the wheat flour varied significantly at 2361.00, 1360.00 and 1001.00. The nutritional and pasting properties of some of flour blends were closely related to wheat flour and may be used for bakery requirements.

scholarly journals Production and Evaluation of Biscuits Made From Wheat Flour and Toasted Watermelon Seed Meal as Fat Substitute

2018 ◽  
Vol 7 (5) ◽  
pp. 112
Author(s):  
A. I. Peter-Ikechukwu ◽  
G. C. Omeire ◽  
N. O. Kabuo ◽  
C. N. Eluchie ◽  
C. Amandikwa ◽  
...  
Keyword(s):  
Moisture Content ◽  
Wheat Flour ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Seed Meal ◽  
Composite Flour ◽  
Crude Fibre ◽  
Watermelon Seed ◽  
Fat Substitute ◽  
Flour Blends

Production and evaluation of biscuits made from wheat flour and toasted watermelon seed meal as fat substitute was studied. Extracted watermelon seeds were toasted and grounded into seed meal, which were later usedto formulate composite flour blends in the ratio of 10:90 (MW1), 20:80 (MW2), 30:70 (MW3), 40:60 (MW4) with and 50:50 (MW5) of water melon seed meal: wheat flour respectively, while 100% wheat flour served as control (W1). Each blend was used to produce biscuits adopting robbing process. The functional properties of flour blends, proximate composition and physical properties of the biscuit samples were determined. Sensory qualities of the biscuits were evaluated by 20-members panelist. The accepted composite biscuit samples was stored on a shelf for 6 weeks and analyzed for moisture and total viable count. Data obtained were analyzed statistically (P&le;0.05) for ANOVA, and means separated using Fisher&rsquo;s LSD Test. The results of the functional properties showed variations in behaviour. There were no significant differences (P&le;0.05) in pH, swelling index, viscosity and gelation temperature of the flour blends while significant differences &lsquo;(P&le;0.05) existed in bulk density, water absorption capacity and wetability. There were significant differences (P&le;0.05) in protein, fat, crude fibre, ash and carbohydrate for both flour blends and biscuit samples respectively. The addition of toasted watermelon seed meal increased protein, fat, crude fibre and ash contents while carbohydrate content decreased with higher substitution level of wheat flour. Moisture content ranged from 10-11 % (flour) and 6.25 -10% (biscuit). Significant differences (P&le;0.05) were recorded in thickness, spread ratio and break strength within the samples. The result of sensory evaluation showed that W1I was significantly different (P&le;0.05) in taste, aroma and overall acceptance. However, MW4 and MW5 were significantly different in texture, but in terms of crispiness, MW1 and MW3 were preferred. Moisture content of the preferred samples (MW1 and MW3) stored for 6 weeks increased from 6.25-11.75 % (MW1) and 6.75 &ndash; 11.0% (MW3) while the viable microbial counts ranged from 2.0 x 102-6.8 x 105cfu/g for bacteria and 1.8 x 101-7.4 x 103cfu/g for mould respectively.

scholarly journals Functional and pasting properties of wheat/tigernut pomace flour blends and sensory attributes of wheat/tigernut pomace flour meat pie

2019 ◽  
Vol 11 (1) ◽  
pp. 30-36
Author(s):  
Idowu Michael Ayodele ◽  
Adeola Abiodun Aderpju ◽  
Oke Emmanuel Kehinde ◽  
Amusa Ayodeji Joseph ◽  
Omoniyi Saheed Adewale
Keyword(s):  
Wheat Flour ◽  
Control Sample ◽  
Pasting Properties ◽  
Sensory Attributes ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Overall Acceptability ◽  
Significant Difference ◽  
Flour Blends

This study investigated the functional and pasting properties of wheat and tigernut pomace flour blends, as well as the sensory attributes of the meat pie obtained from the composite flour. Tigernut pomace flour was substituted for wheat flour in the amount of 2 –10%. Unsubstituted wheat flour served as the control. The composite blends were analysed for functional and pasting properties. The sensory attributes of the meat pie obtained from the composite flour were also determined. Bulk density, water absorption capacity, swelling power, and the solubility index of the blends ranged from 0.70 -0.75 g/mL, 0.62 -0.96%, 4.06 -4.47 g/g, and 2.45 -13.7% respectively. Peak, trough, breakdown, final, and setback viscosities, peak time, and pasting temperature ranged from 113.6 -135.9 RVU, 76.7 -90.2 RVU, 36.0 -45.8 RVU, 170 -183.7 RVU, 91.0 -93.6 RVU, 5.07 -6.03 min, and 88.4 -90.0 RVU respectively. In terms of appearance, the meat pie samples prepared from tigernut-substituted flour blends did not show significant difference (p &lt; 0.05) from the control sample. The control sample had the highest overall acceptability, although samples from the composite blends were also found to be acceptable. Hence, tigernut pomace flour could be substituted for wheat at the amount of 10% to produce an acceptable meat pie.

scholarly journals Quality Characterization of Biscuits from Blends of Bambara Groundnut (Vigna subterranea), Ground Bean Seed (Macrotyloma) and Moringa Seed (Moringa oleifera) Flour

2019 ◽  
pp. 1-12 ◽  
Author(s):  
Justina Y. Talabi ◽  
Babawande A. Origbemisoye ◽  
Beatrice O. Ifesan ◽  
Victor N. Enujuigha
Keyword(s):  
Protein Content ◽  
Wheat Flour ◽  
Moringa Oleifera ◽  
Pasting Properties ◽  
Bambara Groundnut ◽  
Vigna Subterranea ◽  
Bean Seed ◽  
Spread Ratio ◽  
Seed Flour ◽  
Flour Blends

The nutrient composition and the acceptability of biscuit from composite flours of wheat, Bambara groundnut (Vigna subterranea), Ground bean seed (Macrotyloma) and Moringa seed (Moringa oleifera) were evaluated. Bambara groundnut (Vigna subterranea), Ground bean seed (Macrotyloma) and Moringa seed (Moringa oleifera) were dried, and processed into flour. The flour blends developed was used as a substitute for wheat flour as composite flour. The resulting mixtures were then used to produce biscuits at different ratios of wheat flour to flour blends; 100:0, 90:10, 80:20 and 70:30 level of the flour blends. The pasting properties, proximate composition, minerals, physical (spread ratio, weight, thickness and colour) and sensory properties of the composite biscuit were evaluated. The pasting properties of the flours showed that pasting temperature ranged from 68.50°C - 70.0°C and the peak viscousity range from 101.17 RVU – 207.17 RVU, while Break down (43.0 RVU) was highest in 90% wheat: 10% (Bambara- groundnut-ground bean seed- moringa seed flour) (WFF1). The protein content increased from 12.50% in the control (100% wheat flour) to a range of 14.40% - 16.19% in the biscuits; crude fibre decreased from 2.83 to 2.40 - 1.84%, ash content increased from 1.26% to a range of 1.53 - 2.01%, while carbohydrate and energy value reduced from 69.20 to 65.54 - 63.36% and 384.04 Kcal/100 g to 391.34 - 391.55 Kcal/100 g respectively. As the ratio of blends level increase, the thickness, diameter and weight increased but the spread ratio decreased. In conclusion incorporation of bambara groundnut, ground bean seed and moringa seed flour blends played important role in enhancing the nutritional properties of biscuits through improving their protein content, energy value and mineral elements especially calcium and potassium.

Wheat–millet flour cookies: Physical, textural, sensory attributes and antioxidant potential

2019 ◽  
Vol 26 (4) ◽  
pp. 311-320 ◽  
Author(s):  
S Hussain ◽  
AA Mohamed ◽  
MS Alamri ◽  
MA Ibraheem ◽  
Akram A Abdo Qasem ◽  
...  
Keyword(s):  
Gallic Acid ◽  
Wheat Flour ◽  
Pasting Properties ◽  
Gluten Free ◽  
Phenolic Contents ◽  
Health Promoting ◽  
Physical Attributes ◽  
Pasting Temperature ◽  
Technical Properties ◽  
Flour Blends

Millet flour (water washed or alkali washed) was replaced with wheat flour (WF) at 0, 25, 50, 75, and 100% levels. Objectives of the research were to characterize the flour blends for their technical properties and to produce cookies with less or no gluten contents. All types of flour blends were evaluated for their pasting properties. The cookies were baked and evaluated for their textural and physical attributes. Inclusion of millet flour (both types) in wheat flour resulted in significant reduction in peak and final viscosities while setback viscosities were affected non-significantly. Pasting temperature was increased from 65 ℃ (100% wheat flour) to 91 ℃ (100% millet flour). The hardness of cookies was reduced in the presence of millet flour. Fracturability values of cookies with higher millet flour were higher as compared to control cookies (prepared from 100% wheat flour). Cookies prepared from blends having more that 50% millet flour were not much liked by sensory panelists. The phenolic contents of cookies containing higher levels of either water washed or alkali washed millet flour were found to be higher when compared to cookies prepared from plain WF (1.90 ± 0.14 mg gallic acid/g sample). The 2,2-diphenyl-1-picrylhydrazyl activity (%) of cookies ranged from 16.39 ± 0.34 (100% water washed millet flour) to 10.39 ± 0.26 (100% WF; control). The study will help the non-coeliac people to consume low gluten (≈1.6–6.5%) or gluten intolerant people to consume gluten-free cookies (0%) from millet flour having abundant of antioxidants and health-promoting polyphenols.

Sign in / Sign up

Export Citation Format

Share Document