scholarly journals Determination of the rotation speed of chopped hay on the surface of the separator sieve of the leaf part of herbs

2020 ◽  
Vol 1 (4) ◽  
pp. 53-57
Author(s):  
T. Abilzhanuly ◽  
◽  
D.T. Abilzhanov ◽  
Keyword(s):  
Experimental Studies ◽  
Operating Costs ◽  
Empirical Expression ◽  
Average Speed ◽  
Livestock Products ◽  
Main Component ◽  
Analytical Expressions ◽  
Mass Feed ◽  
Leaf Part

To increase the production of livestock products, it is necessary to feed the animals with full-feed mixtures. The main component of the feed mixture is feed, which consists of grain feed, vitamin-grass meal (VGM) and other additives. Currently, high-temperature methods of drying hay are used for the production of VGM, which require high costs and expensive technical means. Therefore, to reduce operating costs and equipment costs, authors proposed a technology and a line for the prepa-ration of VGM from the leaf part of herbs. As part of the VGM preparation line, the main machine is a separator of the leaf portion of grass from chopped hay. The separation process is due to the fact that when grinding dry hay in sieveless shredders, the delicate leaf part is finely chopped, this con-tributes to the process of separating the leaf part of the grasses. The purpose of the research is to determine the speed of hay moving along the surface of the sieve, which allows to determine the productivity of the line by mass feed and flour. For the theoretical determination of the average speed of movement of the sieve, the method of mathematical analysis was used. To determine the actual value of the speed of movement of hay on the surface of the sieve, the method of one-factor experimental research was used. As a result of theoretical studies, the analytical expressions were obtained to determine the performance of the separator, the average speeds of the sieve in the hori-zontal direction and the movement of hay on the surface of the sieve. As a result of experimental studies, a regularity of the change in the average speed of hay movement depending on the length of the sieve was obtained, and this regularity provides an empirical expression for determining the actual value of the average speed of hay layer movement on the surface of the sieve and it is 0.19 m/s. With the average line capacity for mass feeding, the thickness of the transported layer over the sieve surface was 0.0186 m, and it is not maximal for the separator of the leaf part of grasses.

scholarly journals Determining the speed and acceleration of the separator for grass leaf part in horizontal and vertical directions

2021 ◽  
Vol 5 (1(113)) ◽  
pp. 41-50
Author(s):  
Tokhtar Abilzhanuly ◽  
Seitkazy Keshuov ◽  
Askar Rzaliyev ◽  
Omirserik Zhortuylov ◽  
Gani Zhumatay ◽  
...  
Keyword(s):  
High Temperature ◽  
Moisture Content ◽  
Operating Costs ◽  
Theoretical Research ◽  
Carotene Content ◽  
Air Heating ◽  
Side Walls ◽  
Main Component ◽  
Leaf Part ◽  
High Temperature Drying

Vitamin-grass flour is the main component of mixed fodders intended for all types of livestock and poultry. Earlier and currently, the vitamin-grass flour has been prepared from legumes by a high-temperature drying technique. However, existing techniques have high operating costs and require very expensive technical tools. To reduce the specific operating costs and the price of equipment in the production of VGF, a technique has been proposed that involves the main drying of grass to a moisture content of 30‒35 % on a swath while the post-drying of grass is performed in a small-sized channel under the haystack without air heating. Next, the dried mass is pre-crushed. At the same time, the delicate leaf part of the hay, while falling between the side walls of hammers and counter-hammers, is ground and finely crushed, and the stems are processed into large fractions. From pre-crushed hay, the leaf part is separated and fed into the crusher to produce flour. In this case, the main machine that determines the performance of the line is the separator of the leaf part of the grass. The results of the theoretical research have established the speed and acceleration of hay movement on the surface of the sieve. These values determine the productivity of separation of the leaf part from pre-crushed hay and the reliability of the selected structural and technological scheme of the separator. The production tests have confirmed the reliability and economic efficiency of the proposed technique. Comparing the proposed technique for obtaining vitamin-grass flour by existing high-temperature methods has shown that the carotene content in flour was 1.6 times higher while the specific operating costs and equipment price were 6‒7 times lower

Improvement Of Curvilinear Diagrams Of Concrete Deformation

2019 ◽  
pp. 99-104
Keyword(s):  
Reinforced Concrete ◽  
Peak Load ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Deformation Model ◽  
Reinforced Concrete Structures ◽  
Significant Difference ◽  
Deformation Diagrams

Problems when calculating reinforced concrete structures based on the concrete deformation under compression diagram, which is presented both in Russian and foreign regulatory documents on the design of concrete and reinforced concrete structures are considered. The correctness of their compliance for all classes of concrete remains very approximate, especially a significant difference occurs when using Euronorm due to the different shape and sizes of the samples. At present, there are no methodical recommendations for determining the ultimate relative deformations of concrete under axial compression and the construction of curvilinear deformation diagrams, which leads to limited experimental data and, as a result, does not make it possible to enter more detailed ultimate strain values into domestic standards. The results of experimental studies to determine the ultimate relative deformations of concrete under compression for different classes of concrete, which allowed to make analytical dependences for the evaluation of the ultimate relative deformations and description of curvilinear deformation diagrams, are presented. The article discusses various options for using the deformation model to assess the stress-strain state of the structure, it is concluded that it is necessary to use not only the finite values of the ultimate deformations, but also their intermediate values. This requires reliable diagrams "s–e” for all classes of concrete. The difficulties of measuring deformations in concrete subjected to peak load, corresponding to the prismatic strength, as well as main cracks that appeared under conditions of long-term step loading are highlighted. Variants of more accurate measurements are proposed. Development and implementation of the new standard GOST "Concretes. Methods for determination of complete diagrams" on the basis of the developed method for obtaining complete diagrams of concrete deformation under compression for the evaluation of ultimate deformability of concrete under compression are necessary.

Energetic properties of peat saturated with petroleum products

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva
Keyword(s):  
Crude Oil ◽  
Diesel Fuel ◽  
Energy Use ◽  
Experimental Studies ◽  
Calorific Value ◽  
Petroleum Products ◽  
Ash Content ◽  
Motor Oil ◽  
Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.

EXPERIMENTAL STUDIES OF REINFORCED CONCRETE STRUCTURES WITH CROSS-SHAPED SPATIAL CRACK UNDER TORSION WITH BENDING

2020 ◽  
Vol 92 (6) ◽  
pp. 13-25
Author(s):  
Vl.I. KOLCHUNOV ◽  
◽  
A.I. DEMYANOV ◽  
M.M. MIHAILOV ◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Experimental Determination ◽  
Calculation Method ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Design Parameters ◽  
Reinforced Concrete Structures ◽  
Experimental Scheme

The article offers a method and program for experimental studies of reinforced concrete structures with cross-shaped spatial crack under torsion with bending, the main purpose of which is to check the design assumptions and experimental determination of the design parameters of the proposed calculation method. The conducted experimental studies provide an opportunity to test the proposed calculation apparatus and clarify the regularities for determining deflections, angles of rotation of extreme sections, and stresses in the compressed zone of concrete. For analysis, the article presents a typical experimental scheme for the formation and development of cracks in the form of a sweep, as well as characteristic graphs of the dependence of the angles of rotation of end sections.

Diagnostics of the location of damage to tubing oil well pipes

2019 ◽  
Vol 5 (4) ◽  
pp. 115-128
Author(s):  
Timur A. Ishmuratov ◽  
Rif G. Sultanov ◽  
Milyausha N. Khusnutdinova
Keyword(s):  
Fluid Motion ◽  
Oil Well ◽  
General Belief ◽  
Oil Flow ◽  
Specialized Equipment ◽  
Improving Accuracy ◽  
Analytical Expressions ◽  
Technical Measures ◽  
Quick Determination

The study is devoted to the mathematical description of the process of oil outflow in places of leakage of the tubing string, which allows a computer to locate a leakage in the tubing. The authors propose methodology for identifying defects in the tubing and determining the location of the leak. The uniqueness of this methodology lies in quick determination of the place of leakage without the use of specialists, sophisticated and specialized equipment. Mathematical modeling of oil flow in the tubing requires the apparatus of continuum mechanics. It is a general belief that the movement of oil in the pipe flows at low speeds due to its outflow from the hole. Using the general equations of mass and energy balance, the authors have obtained differential equations of fluid motion in a vertical pipe in the process of its outflow from the tubing and in the process of injection. Analytical expressions are the solution to these equations, as they can help in estimating the degree of damage and its location, as well as the feasibility of its eliminating. The results show that an increase in the leakage and injection times leads to improving accuracy of locating damage. Thus, when conducting various geological and technical measures (GTM) at the well, it is possible to assess the presence of leakage and its intensity when deciding on the repair of tubing.

scholarly journals Characterization of the Antibiotic Compound No. 70 Produced byStreptomycessp. IMV-70

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Lyudmila P. Trenozhnikova ◽  
Almagul K. Khasenova ◽  
Assya S. Balgimbaeva ◽  
Galina B. Fedorova ◽  
Genrikh S. Katrukha ◽  
...  
Keyword(s):  
Optimal Growth ◽  
Growth Conditions ◽  
Culture Broth ◽  
Producer Strain ◽  
New Class ◽  
New Antibiotics ◽  
Actinomycete Strain ◽  
Main Component

We describe the actinomycete strain IMV-70 isolated from the soils of Kazakhstan, which produces potent antibiotics with high levels of antibacterial activity. After the research of its morphological, chemotaxonomic, and cultural characteristics, the strain with potential to be developed further as a novel class of antibiotics with chemotherapeutics potential was identified asStreptomycessp. IMV-70. In the process of fermentation, the strainStreptomycesspp. IMV-70 produces the antibiotic no. 70, which was isolated from the culture broth by extraction with organic solvents. Antibiotic compound no. 70 was purified and separated into individual components by HPLC, TLC, and column chromatography methods. The main component of the compound is the antibiotic 70-A, which was found to be identical to the peptolide etamycin A. Two other antibiotics 70-B and 70-C have never been described and therefore are new antibiotics. The physical-chemical and biological characteristics of these preparations were described and further researched. Determination of the optimal growth conditions to cultivate actinomycete-producer strain IMV-70 and development of methods to isolate, purify, and accumulate preparations of the new antibiotic no. 70 enable us to research further the potential of this new class of antibiotics.

Determination of the Effective Depth for Double-Fiber Fluorometric Sensors

1992 ◽  
Vol 46 (6) ◽  
pp. 919-924 ◽  
Author(s):  
Zhong Yuan Zhu ◽  
M. Cecilia Yappert
Keyword(s):  
Fiber Optic Sensor ◽  
Fluorescence Signal ◽  
Acceptance Angle ◽  
Fiber Sensors ◽  
Sample Depth ◽  
Effective Depth ◽  
Different Diameters ◽  
Semi Empirical ◽  
Analytical Expressions

The relationship between the relative fluorescence signal excited and collected with a double-fiber optic sensor and the sample depth has been investigated. The complexity of the analytical expressions for the relative fluorescence signal and the effective depth was reduced by deriving a set of semi-empirical equations which can be evaluated in a simple fashion. These expressions take into account the configuration of the sensor, i.e., fiber diameter, acceptance angle, and separation between fibers. The expressions were tested with the use of double-fiber sensors with different diameters and separations between fibers. The reduction of the effective depth in solutions with significant absorbance was evaluated.

Experimental Determination of KI for Short Internal Cracks

2001 ◽  
Vol 68 (6) ◽  
pp. 937-943 ◽  
Author(s):  
K. Bearden ◽  
J. W. Dally ◽  
R. J. Sanford
Keyword(s):  
Stress Intensity ◽  
Stress Intensity Factors ◽  
Edge Crack ◽  
Series Solution ◽  
Experimental Studies ◽  
Experimental Methods ◽  
Internal Crack ◽  
Intensity Factors ◽  
Mode Stress

Since the pioneering discussion by Irwin, a significant effort has been devoted to determining stress intensity factors (K) using experimental methods. Techniques have been developed to determine stress intensity factors from photoelastic, strain gage, caustics, and moire´ data. All of these methods apply to a relatively long single-ended-edge crack. To date, the determination of K for internal cracks that are double-ended by experimental methods has not been addressed. This paper describes a photoelastic study of tension panels with both central and eccentric internal cracks. The data recorded in the experiments was analyzed using a new series solution for the opening-mode stress intensity factor for an internal crack. The data was also analyzed using the edge-crack series solution, which is currently employed in experimental studies. Results indicated that the experimental methods usually provided results accurate to within three to five percent if the series solution for the internal crack was employed in an overdeterministic numerical analysis of the data. Comparison of experimental results using the new series for the internal crack and the series for an edge crack showed the superiority of the new series.

Sign in / Sign up

Export Citation Format

Share Document