scholarly journals Study on the Removal Efficiency of Heavy Metals in Flue Gas of Small Sintering Machines

2021 ◽  
Author(s):  
Yu Chen ◽  
Fan Zhang ◽  
Yu Liu ◽  
Chen Zhang ◽  
Gang Tian ◽  
...  

Heavy metal pollutants such as Hg, Pb, Cr, and Cd contained in flue gas from the sintering equipment bring about environmental hazards. In this paper, 4 small sintering machines with different control technologies were selected, and the US EPA 29 method was used to analyze the emission concentration of heavy metals from the sintering machines, and the removal efficiency of the different flue gas control technologies on the of heavy metal pollutants was analyzed. The results show that the dry flue gas desulfurization combining baghouse dedusting method has high removal efficiency of heavy metals in flue gas, with mercury removal efficiency of 60.06%, Pb removal efficiency of 92.92%, Cd removal efficiency of 92.20%, Cr removal efficiency of 55.14%. The removal efficiency of heavy metals is obviously higher than that of conventional electrostatic precipitation combining wet desulfurization. This is mainly ascribed to those heavy metals are mainly concentrated in the fine particulate matters of the fly ash. Dust removal technology can effectively coordinate the control of Hg, Cr, Pb and Cd in the flue gas. The semi-dry desulphurization and baghouse dedusting technology can promote the enrichment of Hg and Cr in fly ash. The results of this study can provide theoretical guidance for the control of Hg, Cr, Pb, Cd and other heavy metal pollutants control in sintering equipment, and for flue gas ultra-low emission transformation.

2020 ◽  
Vol 21 (2) ◽  
pp. 98-109
Author(s):  
Witriani Marvinatur Ihsan ◽  
Ratnawulan Ratnawulan

In the South Coastal Forest area, West Sumatra, a luminous mushroom with the species Neonothopanus Sp. This research was conducted with the aim of seeing the effect of heavy metals on the bioluminescence reaction of luminous mushrooms. Starting from the effect of heavy metal concentrations on the intensity and inhibition coefficient of luminous mushroom biolumination. From the measurement results, the maximum intensity value of luminous mushrooms is 499.6 au occurring at a wavelength of 505 nm. At a wavelength of 505 nm, visible light is produced in green. The results obtained are in accordance with observations, because the light emitted by the glowing mushroom is green. If the concentration of heavy metals is greater, the intensity of the bioluminescent fungus (Neonothopanus sp) will decrease. The type of heavy metal affects the intensity of the fungus biolumination. The greatest decrease in intensity occurred in copper (Cu) and iron (Fe), zinc (Zn) and lead (Pb). If the heavy metal concentration is greater, the inhibition coefficient will be smaller. The greatest inhibition coefficient due to the presence of heavy metals occurs in copper (Cu) then iron (Fe), zinc (Zn) and the smallest is lead (Pb).


2013 ◽  
Vol 830 ◽  
pp. 341-344
Author(s):  
Jun Jun Du ◽  
Sheng Ping Jin ◽  
Qiong Li ◽  
She Sheng Zhang

Consider heavy metal pollution of topsoil in the city of world today is a hot science research project. A fuzzy clustering algorithm l is constructed ed by analyzing the propagation characteristics of heavy metal pollutants. Considering topography, areas, factories, roads, , irredentist, etc. we calculate a evaluation on comprehensive pollution, and the degree of heavy metals pollution, by using fuzzy clustering and fuzzy AHP. The results show that the index of the comprehensive pollution of heavy metals on the region, and the weight of pollution of each category.


RSC Advances ◽  
2018 ◽  
Vol 8 (66) ◽  
pp. 38013-38021 ◽  
Author(s):  
Dean Fang ◽  
Xuefei Zhang ◽  
Xiangxin Xue

A novel resource utilization method using wet magnesia flue gas desulfurization residue for the simultaneous removal of ammonium nitrogen and heavy metal pollutants from vanadium industrial wastewater was proven to be viable and effective.


2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Muyun Sun ◽  
Kaiyuan He ◽  
Shi Shu

Despite the extensive attention paid to the transport of heavy metals in sludge landfills, the processes of transporting these pollutants from a landfill to the underground environment are quite complicated and subject to significant uncertainty. In this study, the transport of typical heavy metal pollutants in a sludge landfill through saturated and unsaturated soil zones during rainfall was investigated via numerical modeling. The objectives of the study are to evaluate the heavy metal pollution risk from a sludge landfill under rainfall infiltration conditions and to propose several management suggestions. The results indicate that, during rainfall, heavy metal concentrations at the top of the unsaturated sludge layer decrease rapidly, but they decrease more gradually at the bottom of the layer. The maximum concentration appears in vertical distribution and decreases gradually through the saturated zone. Nickel is the first heavy metal pollutant to break through the low-permeability natural silt barrier. The transport parameters not only influence the simulated time for heavy metal pollutants to break through the silt layer and cause underground environmental pollution but also affect the extent to which the heavy metal pollutants in pore water exceed the guidelines. On the basis of these results, for dredged sludge with heavy metal concentrations significantly exceeding the standard, the concentration of heavy metals in pore water should be reduced before the sludge is landfilled, and a covering layer should be established on the sludge surface to control rainfall infiltration.


2020 ◽  
Author(s):  
maryam khalilzadeh poshtegal ◽  
Mojtaba Noury ◽  
seyed ahmad mirbagheri

<p><strong>Abstract: </strong>Based on the deep studies of existing mathematical models, a mathematical model that expresses the dynamic of transport and transformation of heavy metals in the rivers has been presented. In this model, the basic principles of chemistry in the environment, hydraulic and fluid transfer dynamics have been used as well as recent studies of researchers. The effects of sediment on the transfer and evolution of heavy metals pollution can be investigated by the proposed models. For example, the evolution and transport of heavy metal pollutants in a steady state flow containing sediment are studied using the present model. The results of theoretical analysis and calculations show that transport and transformation of heavy metal pollution in sediment laden flows, not only have common characteristics of general pollutant but also have features of transport and transformation induced by the movement of sediments.</p><p><strong>Keywords:</strong> Numerical Simulation; Heavy Metal; Pollution; Sediment; Finite Difference Method.</p>


2021 ◽  
Author(s):  
◽  
Andrea Tuohy

<p>Global industrialization has led to emissions of heavy metal pollutants that are transported to the most remote areas of the planet. Elevated concentrations of heavy metals are ecological toxins in soils, water, and air. Monitoring has only been implemented during the last few decades with anthropogenic emissions superimposed over natural sources. Furthermore, most monitoring programs generally target local sources of emissions near cities rather than large-scale impacts. Thus quantifying safe limits and controlling industrial emissions is complicated by a lack of knowledge about natural sources and variability on regional, hemispheric, and global scales. New baseline studies are needed to determine i) natural background concentrations of heavy metals, ii) contributions of anthropogenic emissions, and iii) the degree to which atmospheric transport affects background heavy metal concentrations. Due to the remoteness of Antarctica, ice cores can be used as sensitive recorders of background heavy metal atmospheric concentrations over thousands of years. This provides the opportunity to determine natural variability and contributions to the atmosphere on a hemispheric scale, as well as dating the onset of anthropogenic emissions.  This thesis presents a 2,300-year time-series record of six heavy metals from a new high-resolution coastal ice core from the Ross Sea region of Antarctica. Roosevelt Island is an ice dome located in the north-eastern Ross Ice Shelf, and a 763m deep ice core was collected over two field seasons as part of the Roosevelt Island Climate Evolution (RICE) project. In addition to 31 other trace elements, concentrations of iron, aluminium, manganese, lead, arsenic, and thallium were measured using inductively coupled plasma mass spectrometry (ICPMS) in the RICE ice core, snow pit, and snow precipitation samples. Sample resolution over the 20th century is extremely high (~1.6 months per sample), with ~four-year resolution extending the record back to 2,300 years ago.  We use this record to first determine the representativeness of the RICE ice core to Southern Hemisphere atmospheric concentrations of heavy metals, and find that concentrations in snow precipitation are strongly linked to meridional air mass pathways from the South Pacific. Local deposition characteristics and heavy metal seasonality are also examined in the surface snow. The natural sources and variability of the six heavy metals are explored through the last ~2,000 years, and this provides the context for examining changes over the 20th century. We find that iron, aluminium, and manganese are strongly associated with crustal dust and do not exhibit source changes over the 20th century, though significant increases in concentration may be due to anthropogenically induced increases in atmospheric dust. Even when increased variability due to recent increased efficiency of atmospheric transport is taken into account, the change in source emission strength dominates the concentration increases in these elements recorded in the RICE ice core. Thallium concentrations do not increase over the 20th century, and are likely linked to local volcanism. Both lead and arsenic concentrations increase significantly over the 20th century, with the pattern in lead concentrations closely matching existing Antarctic records. These increases are linked to anthropogenic emissions, with peaks during the 1970s and 1980s up to 400% higher than pre-industrial concentrations – well outside the natural variability. However, the ice core record shows a decreasing trend in concentrations of these elements from the mid-1990s to the present. Arsenic concentrations return to within pre-industrial variability, and the timing of this trend coincides with increasing efforts of policy makers in Southern Hemisphere countries to regulate industrial emissions and to promote public awareness of heavy metal pollutants.</p>


Transport ◽  
2020 ◽  
Vol 35 (2) ◽  
pp. 213-223
Author(s):  
Rasa Vaiškūnaitė ◽  
Vilma Jasiūnienė

Recently, concern for a rapid increase in heavy metal pollutants released by railway transport has been expressed. Most of pollutant emissions from combustion processes are related to fuel consumption in the internal combustion engines of traction rolling stock. The main pollutants released into the environment cover particulate matter, volatile non-methane organic compounds, sulphur dioxide and nitrogen oxides. In this way, it is likely that the biggest polluters of the environment are traction units with internal combustion engines. However, other types of pollution are possible, where polluters can be not only traction rolling stock with the internal combustion engines, but also electric locomotive. For example, when due to friction of metals and deterioration of rolling stock wheels, heavy metals such as aerosols are released into the atmosphere, soil, surface and ground water, etc. and severely pollute the railway environment. Along with an increase in the electrification of railways, local environmental pollution is likely to be increased in the future. High pollution by heavy metals can also occur near the track storing creosote-impregnated wooden railway sleepers. Having analysed railway transport intensity and in order to assess pollution level, the stations of three major cities of Lithuania (Vilnius, Kaunas and Klaipėda) were selected to investigate heavy metal pollutants (lead (Pb), cadmium (Cd), zinc (Zn)) acting as the most toxic and widespread elements. The highest concentrations of Pb (up to 50 mg/kg) were found at a distance of 5.0 m from railway sleepers in the upper (up to 10 cm) soil layer at Vilnius Railway Station. A comparison of the results of the investigated soil across the tested stations showed that Klaipėda Railway Station was the area most polluted with Cd. The highest concentrations of Cd (up to 1.5…1.8 mg/kg) were established at a varying distance of 5…10 m from the sleepers in the upper (up to 10 cm) soil layer of light loam. Among the investigated stations, the lowest pollution by heavy metals, including Zn, was found at Kaunas Railway Station where sandy loam dominated. A comparison of heavy metal pollutants deposited on the intact used and rotten wooden railway sleepers disclosed that the latter were more heavily contaminated with heavy metals and made from 8 to 13 mg/kg for Pb, from 0.3 to 1.2 mg/kg for Cd, from 13.8 to 66 mg/kg for Zn.


GeoEco ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 12
Author(s):  
Lies Indriyani ◽  
Deniyatno Deniyatno ◽  
Sahindomi Bana ◽  
Ridwan Adi Surya ◽  
Junartin Teke

<p>Heavy metal is one of the most pollutant loads that endangers the aquatic environment. Not only damaging the aquatic ecosystem, the presence of heavy metals also endangers the human health. This Research aims to determine the levels of heavy metals, especially Pb, Cu and Zn in water and also the sediments inside Kendari Bay waters. To determine the environmental quality of Kendari Bay waters standards, Sampling was carried out at 10 stations and sample analysis was carried out using the AAS method. Data analysis was performed using descriptive methods. The results showed that heavy metals Pb, Cu and Zn in water ranged &lt;0.002 - 0.012 mg / L, for metals ranging from &lt;0.002 - 0.003 mg / L, Cu metals ranged from &lt;0.002 - 0.012 mg / L and Zn metals ranged from &lt;0.002 - 0.003 mg / L, while heavy metals Pb, Cu and Zn in sediments range &lt;0.002 - 0.047 mg / kg, for Pb metals range from 0.052 to 0.047 mg / kg, Cu metals range &lt;0.002 - 0.042 mg / kg and Zn metals range from 0 , 0019 - 0.011 mg / kg. The heavy metal content of Pb, Cu, and Zn in both water and sediment samples has not exceeded the quality standards based on the Decree of the Minister of Environment No.51 of 2004 and USEPA.</p><p><em>Keyword</em><em>s</em><em> : kendari bay, heavy metal, Pb, Cu, Zn</em><em></em></p>


2016 ◽  
Vol 11 (1) ◽  
pp. 325-332 ◽  
Author(s):  
Pammi Singh ◽  
Mithra Dey ◽  
Sunkam Narayana

Considering the significance of heavy metal pollution in aquatic system bioaccumulation of heavy metals in two species of tadpoles namely Clinotarsus alticola and Leptobrachium smithicollected from tea gardens of Barak valley, Assam was studied. Aquatic life is affected by heavy metal pollutants present in water as well as in sediment. The result of the study revealed that the concentration of iron, chromium, cadmium and lead in water samples was higher than the permissible limit of 0.3, 0.05, 0.003, 0.01 mg/L respectively but that of copper and zinc concentration was within the maximum permissible limit of 2 mg/L and 3 mg/L (WHO, 2005). The accumulation pattern of different heavy metals in different organs viz., intestine, liver and tail was studied.Overall the metal burden in different organs of Clinotarsus alticola and Leptobrachium smithi was in the order of liver>tail>intestine. Liver had highest accumulation of metals while intestine accumulated the least.Iron (Fe) was highly and zinc (Zn) was the least accumulated metal in both the tadpoles. The accumulation of heavy metals might be due to tea plantation influx water, domestic and associated anthropogenic activities.


2021 ◽  
Author(s):  
Yunfei Li

With the rapid development of industry, large amounts of untreated industrial waste water and domestic sewage carried heavy metal pollutants below into the water body with enrichment in sediments. When environmental conditions change, enrichment of heavy metals in sludge may be released into the overlying water causing the overlying water quality standard. The agent on immobilization of heavy metals in sludge is to be an extremely promising remediation technology in order to reduce impact on the environment. This test selects Hydroxyapatite and Nano Hydroxyapatite as curing agent and puts it into heavy metal pollution by different proportion. The paper conducts the research of curing agent and optimizes the better one. The paper selected HAP as matrix and CaO and MgO as different additives and studied complex condition of heavy metals in sediment of curing effect. Also the paper conduct the static releases test for pollutants in cured sediment in order to provide technical support for contaminated sediment remediation of heavy metal.


Sign in / Sign up

Export Citation Format

Share Document