scholarly journals Industrial - agricultural symbiosis model for cassava starch production factory in Tay Ninh province

2021 ◽  
Vol 5 (1) ◽  
pp. 284-297
Author(s):  
Giàu Văn Võ ◽  
Nam Thành Nguyễn
Keyword(s):  
Rubber Tree ◽  
Cassava Starch ◽  
Production Plant ◽  
Clean Water ◽  
Symbiosis Model ◽  
Natural Leaf ◽  
The Cost ◽  
Technical Solutions ◽  
Starch Industry ◽  
Starch Production

This study aims to propose an industrial-agricultural symbiosis model that applies the closed sloop eco-technical solutions for cassava starch production towards sustainable development. This study applies the AHP method to analyze nine alternatives and determines the best one based on 17 specific criteria for the typical cassava starch production plant in Tay Ninh province. The chosen model has 12 losed sloop solutions and can save about 40% groundwater, hundreds of cubic metre of water for irrigation in agriculture (to meet hundreds of hectares of crops), limit the lack of water in the dry season and water regulation from the Dau Tieng lake and reduce from 19-73% emissions from traffic,... Wastewater after Biogas is diluted in proportion for cassava is 28l wastewater/49l of clean water and the rubber tree is 8,5l of wastewater/7l of clean water and sugar-apple is 20l wastewater/20l of clean water wasto spray as a natural leaf fertilizer, limiting the use of NPK chemical fertilizers. Some indicators of wastewater after treatment show that it is suitable for use as fertilizer but suitable for nutrient development in the soil and increase nitrogen for plant development, reducing the cost of using stimulating fertilizers. In addition, production wastewater with high cyanide levels is also considered to dilute according to certain proportions as natural insecticidal drugs. These results show that industrial-agricultural symbiosis model bring great enviromental benifits for cassava starch industry and can be replicated in the future.

TECHNICAL AND ECONOMIC EVALUATION OF THE DEVELOPMENT OF A DEVICE FOR THE PREVENTION OF APNEA DURING PHYSIOLOGICAL SLEEP IN HUMANS

2020 ◽  
pp. 198-210
Author(s):  
Сергей Борисович Казаков ◽  
Дмитрий Михайлович Шишов ◽  
Антон Игоревич Ларин ◽  
Александр Петрович Николаев ◽  
Аза Валерьевна Писарева
Keyword(s):  
Sleep Apnea ◽  
Humidity Sensor ◽  
Lung Ventilation ◽  
High Price ◽  
Device Structure ◽  
Artificial Lung Ventilation ◽  
Exact Moment ◽  
The Cost ◽  
Technical Solutions ◽  
Physiological Sleep

В статье представлен обзор существующих технических решений в сфере мониторинга и предотвращения апноэ во сне. Произведён анализ существующих аппаратов для предотвращения апноэ, который показал, что на рынке присутствует большое количество импортных моделей, однако они имеют довольно высокую цену. Разработанный нами Российский аналог проектируемого аппарата, при схожих характеристиках, будет иметь более привлекательную цену, чем у импортных приборов. Интегрирование датчика влажности в персональную маску пациента даёт возможность отслеживать остановки дыхания пациента во время сна, и тем самым включать процесс принудительной подачи дыхательной смеси именно в тот момент, когда она необходима для устранения патологии. Целью научной работы является разработка конструкции прибора и создание алгоритма программы для управления аппарата искусственной вентиляции лёгких для предотвращения апноэ во сне. Показана разработка структуры устройства аппарата. Подобран компрессор и датчик влажности с обоснованными характеристиками для создания аппарата, а также основные элементы. Разработана конструкция корпуса аппарата и разработана компоновка. Выполнено технико-экономическое обоснование разработки аппаратно-программного комплекса для предотвращения апноэ во сне. Показано, что себестоимость готового изделия достаточно конкурентна The article presents an overview of existing technical solutions in the field of monitoring and prevention of sleep apnea. An analysis of existing devices for preventing apnea was made, which showed that there are a large number of imported models on the market, but they have a fairly high price. The Russian analog of the designed device developed by us, with similar characteristics, will have a more attractive price than that of imported devices. The integration of the humidity sensor into the patient's personal mask makes it possible to monitor the patient's breathing stops during sleep, and thus enable the process of forced delivery of the respiratory mixture at the exact moment when it is necessary to eliminate the pathology. The purpose of the research is to develop the device design and create a program algorithm for controlling the artificial lung ventilation device to prevent sleep apnea. The development of the device structure is shown. The compressor and humidity sensor with reasonable characteristics for creating the device, as well as the main elements are selected. The design of the device body and its layout were developed. A feasibility study for the development of a hardware and software system for preventing sleep apnea has been completed. It is shown that the cost of the finished product is quite competitive

Microcontroller Device for Conductor Identification Using Acoustic Signal

2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev
Keyword(s):  
Acoustic Signal ◽  
Acoustic Waves ◽  
Theoretical Calculations ◽  
Poor Quality ◽  
Electrical Circuit ◽  
Research Purpose ◽  
Electrical Wiring ◽  
The Right ◽  
The Cost ◽  
Technical Solutions

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.

scholarly journals A METHODOLOGY TO SUPPORT COMPANIES IN THE FIRST STEPS TOWARDS DE-MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 131-140
Author(s):  
Federica Cappelletti ◽  
Marta Rossi ◽  
Michele Germani ◽  
Mohammad Shadman Hanif
Keyword(s):  
Environmental Impact ◽  
End Of Life ◽  
Design Stage ◽  
Life Strategies ◽  
Disassembly Sequence ◽  
The Status ◽  
The Cost ◽  
Technical Solutions ◽  
First Time ◽  
Complex Activities

AbstractDe-manufacturing and re-manufacturing are fundamental technical solutions to efficiently recover value from post-use products. Disassembly in one of the most complex activities in de-manufacturing because i) the more manual it is the higher is its cost, ii) disassembly times are variable due to uncertainty of conditions of products reaching their EoL, and iii) because it is necessary to know which components to disassemble to balance the cost of disassembly. The paper proposes a methodology that finds ways of applications: it can be applied at the design stage to detect space for product design improvements, and it also represents a baseline from organizations approaching de-manufacturing for the first time. The methodology consists of four main steps, in which firstly targets components are identified, according to their environmental impact; secondly their disassembly sequence is qualitatively evaluated, and successively it is quantitatively determined via disassembly times, predicting also the status of the component at their End of Life. The aim of the methodology is reached at the fourth phase when alternative, eco-friendlier End of Life strategies are proposed, verified, and chosen.

Cleaning in Crystalline Si Solar Cell Manufacturing

2012 ◽  
Vol 195 ◽  
pp. 283-288 ◽  
Author(s):  
Juergen Schweckendiek ◽  
Ronald Hoyer ◽  
Sebastian Patzig-Klein ◽  
Franck Delahaye ◽  
Gerry Knoch ◽  
...  
Keyword(s):  
Solar Cell ◽  
Large Scale ◽  
Diffusion Coating ◽  
Production Lines ◽  
Si Solar Cell ◽  
The Subject ◽  
Similarities And Differences ◽  
The Cost ◽  
Technical Solutions ◽  
Near Future

The large scale of production of modern PV manufacturing as well as the cost pressure demand a different approach to cleaning processes in semiconductor and PV applications. The subject of this presentation is, to highlight aspects of similarities and differences. Total added cost/m2of Si are estimated for typical PV manufacturing conditions and compared to semiconductor applications. Typical technical solutions are reviewed. They are compared to the anticipated technical and cost requirements in the near future according to PV roadmaps and cell concepts which are evident today. Starting with typical cleaning processes during the wafering (sawing, cleaning, separation) up to cell processing (texturing, diffusion, coating and plating) the main cleaning processes are presented and their specifics are indicated. Finally recontamination and conditioning in production lines are reviewed.

Evaluation of the waste from cassava starch production as a substrate for ethanol fermentation by Saccharomyces cerevisiae

2010 ◽  
Vol 61 (3) ◽  
pp. 431-436 ◽  
Author(s):  
Ancharida Akaracharanya ◽  
Jutarat Kesornsit ◽  
Natchanun Leepipatpiboon ◽  
Teerapatr Srinorakutara ◽  
Vichien Kitpreechavanich ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Ethanol Fermentation ◽  
Cassava Starch ◽  
Starch Production

Modernization of monitoring system of tir pressure for forest and agricultural machines

2021 ◽  
Author(s):  
I. V. Grigoryev ◽  
◽  
O. A. Kunitskaya ◽  
Yu. V. Lanskikh ◽  
S. Yu. Sandakov ◽  
...  
Keyword(s):  
Low Cost ◽  
Competitive Advantages ◽  
Tire Pressure ◽  
Agricultural Enterprises ◽  
Innovative Methods ◽  
Logging Industry ◽  
Cross Country ◽  
The Cost ◽  
Technical Solutions ◽  
Agricultural Machines

Technical solutions that can be implemented to increase mileage of tires up to 35%, eliminate the emergency of tires of forest and agricultural machines, reduce fuel consumption, increase cross-country ability and stability of machines, reduce damage of soil of cutting areas are discussed. These innovative methods for management of durability of tires are already widely used abroad, in leading transport companies in Russia, at large agricultural enterprises, but are still not known in the logging industry. The main competitive advantages of these technical solutions are simplicity of the construction, installation and operation, as well as low cost. As a result of the analysis of the existing tire pressure monitoring systems, the authors suggest the principle of improving the construction, which increases its reliability and reduces the cost.

scholarly journals Antagonistic lactic acid bacteria in association with Saccharomyces cerevisiae as starter cultures for standardization of sour cassava starch production

2019 ◽  
Vol 56 (9) ◽  
pp. 3969-3979
Author(s):  
Fernanda Corrêa Leal Penido ◽  
Carmen de Oliveira Goulart ◽  
Yara Cristina Fidelis Galvão ◽  
Carolina Vasconcelos Teixeira ◽  
Roseane Batitucci Passos de Oliveira ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Cassava Starch ◽  
Starter Cultures ◽  
Starch Production

Clean Water: How High the Cost?

Science News ◽  
1971 ◽  
Vol 100 (26) ◽  
pp. 419
Keyword(s):  
Clean Water ◽  
The Cost

scholarly journals Production of natural aroma by yeast in wastewater of cassava starch industry

2015 ◽  
Vol 35 (4) ◽  
pp. 721-732 ◽  
Author(s):  
Simone M. M. Oliveira ◽  
Simone D. Gomes ◽  
Luciane Sene ◽  
Divair Christ ◽  
Julia Piechontcoski
Keyword(s):  
Food Industry ◽  
Cassava Starch ◽  
Glucose Yield ◽  
Batch System ◽  
Low Concentrations ◽  
Chewing Gums ◽  
Biotechnological Processes ◽  
Cassava Wastewater ◽  
Yield Factor ◽  
Starch Industry

ABSTRACT 2-Phenylethanol (PE) is an aromatic alcohol with a characteristic odor of roses, widely used in food industry to modify certain aroma compositions in formulations with fruit, jam, pudding, and chewing gums, and also in cosmetic and fragrance industry. This compound occurs naturally in low concentrations in some essential oils from flowers and plants. An alternative to plants extraction are biotechnological processes. This study evaluated 2-phenylethanol’s production in cultivation of Saccharomyces cerevisiae in cassava wastewater originated from starch industry. The substrate was supplemented with glucose and L-phenylalanine in order to obtain higher 2-phenylethanol concentrations and better efficiency in glucose/2-phenylethanol conversion. It was performed using Rotatable Center Composite Design and response surface analysis. Cultures were performed under aerobic conditions in a batch system in Erlenmeyer flasks containing 50 mL of medium in shaker at 150 rpm and 24 ± 1 ºC. The highest PE values were obtained with supplementation of 20.0 g.L-1 of glucose and 5.5 g.L-1 of L-phenylalanine, which has been experimentally validated, obtaining a PE production of 1.33 g.L-1 and PE/glucose yield factor of 0.070 g.g-1, equivalent to 74.3 and 89.7% of desirability values according to the validated model.

scholarly journals Effect of the improved fermentation on physicochemical properties and sensorial acceptability of sour cassava starch

2007 ◽  
Vol 50 (6) ◽  
pp. 1073-1081 ◽  
Author(s):  
Maria Janete Angeloni Marcon ◽  
Gisele Cristina Netto Vieira ◽  
Karina Nunes de Simas ◽  
Karina Santos ◽  
Manoela Alano Vieira ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Cassava Starch ◽  
Fermentation Time ◽  
Expansion Capacity ◽  
Starch Production

The aim of this work was to study the effect of improved fermentation on sour cassava starch, aiming to reduce its fermentation time and to enhance its expansion capacity as well as its viscoamylographic properties and its sensorial acceptability. Results showed that the improved process of cassava starch production did not harm starch expansion, physicochemical properties or sensorial acceptability; it also produced starches with different viscoamylographic properties, which compared favourably to those of the sour cassava starch produced through current industrial methods.

Sign in / Sign up

Export Citation Format

Share Document