scholarly journals STUDI IDENTIFIKASI PERANGKAP HIDROKARBON PALEOGEN - NEOGEN DI PERAIRAN WOKAM ARU UTARA, PAPUA BARAT: DATA UTAMA HASIL SURVEI GEOMARIN III

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Priatin Hadi Wijaya ◽  
Deny Setiady ◽  
Jusfarida Jusfarida ◽  
R. Wibowo
Keyword(s):  
Oil And Gas ◽  
Geological Structure ◽  
Passive Margin ◽  
Normal Faults ◽  
Seismic Structure ◽  
Seismic Section ◽  
Half Graben ◽  
Main Fault ◽  
Survey Results ◽  
Papua Barat

ABSTRAKPerairan Wokam Aru Utara, Papua Barat merupakan bagian tepi utara passive margin Mesozoik Arafura – Australia. Hasil survei dengan KR. Geomarin III di perairan Wokam 2014 diperoleh lintasan seismik Multi Kanal 1.182 km, dan pemeruman batimetri/sub bottom profiles (SBP) 1.510 km. Metode dilakukan interpretasi penampang seismik hasil survei, pengikatan sumur pemboran dan seismik, analisis petrofisika dan pemetaaan geologi bawah permukaan. Pada penampang seismik telah dilakukan interpretasi aspek struktur geologi dan perlapisan sedimen yang sebelumnya telah diikat dengan data sumur ASA-1X, ASM-1X dan ASB-1X untuk tiga horizon yaitu Top Neogen, Top Paleogen dan Base PaleogenPeta bawah permukaan Paleogen – Neogen menunjukan beberapa klosur yang berpotensi di bagian batas paparan dengan palung Aru serta bagian barat. Pada bagian Tenggara terdapat kenampakan onlapping sedimentasi Tipe struktural yang berkembang sebagai perangkap secara dominan berupa graben – half graben dan tilted faul. Onlaping sedimentasi yang mebaji juga dapat berpotensi.Struktur geologi pada area penelitian secara umum dikontrol oleh sesar utama Zona Sesar Palung Aru Utara di tepian paparan sampai lereng, mengarah utara - timur laut ke selatan - barat daya. Struktur ikutan yaitu sesar-sesar normal mengarah utara - timur laut ke selatan - barat daya di paparan sebelah timur zonar sesar utama.Studi awal potensi migas ini teridentifikasi empat lokasi potensi perangkap hidrokarbon dari umur Paleogen - Neogen, yaitu satu lokasi dari Peta Base Paleogen, dua lokasi Top Paleogen dan satu lokasi Top Neogen. kata kunci: Wokam, Aru, migas, seismik, struktur, interpretasi, jebakan, Geomarin III ABSTRACTThe waters of Wokam North Aru, West Papua are part of the northern edge of the Mesozoic passive margin of Arafura - Australia. Survey results with KR. Geomarin III in the waters of Wokam 2014 obtained a multi-channel seismic trajectory of 1,182 km, and bathymarism/sub bottom profiles (SBP) 1,510 km. The method is to interpret the seismic cross-section of the survey results, tie drilling and seismic wells, petrophysical analysis and mapping the subsurface geology. In the seismic section, an interpretation of the structural aspects of the geology and sediment layers has been carried out previously tied to data from the ASA-1X, ASM-1X and ASB-1X wells for three horizons, namely Top Neogen, Top Paleogene and Base Paleogene.The subsurface map of the Paleogene - Neogeneous surface shows several potential closures in the exposure boundary with the Aru Trench as well as the western part. In the Southeast, there is the appearance of sedimentation onlapping. Structural types that develop as traps are predominantly graben - half graben and tilted fault. The onlaping sedimentation also has potential. The geological structure in the study area is generally controlled by the main fault of the North Aru Trench Zone on the edge of the exposure to the slope, heading north - northeast to south - southwest. Follow-up structures are normal faults pointing north - northeast to south - southwest on the eastern exposure of the main fault zone.This preliminary study of oil and gas potential identified four potential locations for hydrocarbon traps from the Paleogene - Neogene age, namely one location from the Paleogene Base Map, two Top Paleogene locations and one Top Neogen location.Keyword: Wokam, Aru, oil and gas, seismic, structure, interpretation, traps, Geomarin III

APPLICATION OF THE DETACHMENT MODEL FOR CONTINENTAL EXTENSION TO HYDROCARBON EXPLORATION IN EXTENSIONAL BASINS

1989 ◽  
Vol 29 (2) ◽  
pp. 99
Author(s):  
M. A. Etheridge ◽  
P. A. Symonds ◽  
T. G. Powell
Keyword(s):  
Thermal Anomaly ◽  
Hydrocarbon Exploration ◽  
Passive Margin ◽  
Source Rocks ◽  
Normal Faults ◽  
Rift Basin ◽  
Wide Range ◽  
Continental Rifts ◽  
Half Graben ◽  
Transfer Faults

The extension of the continental lithosphere that gives rise to continental rifts and eventually to passive continental margins and their basins is considered generally to involve shear on one or more major, shallow dipping normal faults (detachments). The operation of these detachments induces a basic asymmetry into the extensional terrane that is analogous to that in thrust terranes. As a result, the two sides of a continental rift and conjugate passive margin segments are predicted to have contrasting structure, facies development, subsidence history and thermal evolution.The major structural consequence of the detachment model is that half- graben rather than full graben geometry is expected in rift basins, consistent with recent interpretations in a wide range of continental rifts and passive margins. Half- graben geometry dominates in the Bass Strait basins, the Canning Basin and in a number of Proterozoic rifts, and has been observed on most parts of the Australian continental margin. Variations in the along- strike geometry of extensional basins are accommodated by transfer faults or fault zones. Transfer faults are as important and widespread in rifts as the classical normal faults, and they have important consequences for hydrocarbon exploration (e.g. design of seismic surveys, structural interpretation of seismic data, play and lead development).The fundamental asymmetry of extensional basins, and their compartmentalisation by transfer faults also control to a large extent the distribution of both source and reservoir facies. A model for facies distribution in a typical rift basin is presented, together with its implications for the prime locations of juxtaposed sources and reservoirs. Maturation of syn- rift source rocks depends on both the regional heat flow history and the amount of post- rift subsidence (and therefore burial). Both of these factors are influenced, and are partly predictable by the detachment model. In particular, there may be substantial horizontal offset of both the maximum thermal anomaly and the locus of post- rift subsidence from the rift basin. Analysis of deep crustal geophysical data may aid in the interpretation of detachment geometry and, therefore, of the gross distribution of thermal and subsidence histories.

APPLICATION OF THE DETACHMENT MODEL FOR CONTINENTAL EXTENSION TO HYDROCARBON EXPLORATION IN EXTENSIONAL BASINS

1988 ◽  
Vol 28 (1) ◽  
pp. 167 ◽  
Author(s):  
M.A. Etheridge ◽  
P.A. Symonds ◽  
T.G. Powell
Keyword(s):  
Thermal Anomaly ◽  
Hydrocarbon Exploration ◽  
Passive Margin ◽  
Source Rocks ◽  
Normal Faults ◽  
Rift Basin ◽  
Wide Range ◽  
Continental Rifts ◽  
Half Graben ◽  
Transfer Faults

The extension of the continental lithosphere that gives rise to continental rifts and eventually to passive continental margins and their basins is considered generally to involve shear on one or more major, shallow dipping normal faults (detachments). The operation of these detachments induces a basic asymmetry into the extensional terrane that is analogous to that in thrust terranes. As a result, the two sides of a continental rift and conjugate passive margin segments are predicted to have contrasting structure, facies development, subsidence history and thermal evolution.The major structural consequence of the detachment model is that half-graben rather than full graben geometry is expected in rift basins, consistent with recent interpretations in a wide range of continental rifts and passive margins. Half-graben geometry dominates in the Bass Strait basins, the Canning Basin and in a number of Proterozoic rifts, and has been observed on most parts of the Australian continental margin. Variations in the along-strike geometry of extensional basins are accommodated by transfer faults or fault zones. Transfer faults are as important and widespread in rifts as the classical normal faults, and they have important consequences for hydrocarbon exploration (e.g. design of seismic surveys, structural interpretation of seismic data, play and leav development).The fundam* nal asymmetry of extensional basins, and their compartmentalisation by transfer faults also control to a large extent the distribution of both source and reservoir facies. A model for facies distribution in a typical rift basin is presented, together with its implications for the prime locations of juxtaposed sources and reservoirs. Maturation of synrift source rocks depends on both the regional heat flow history and the amount of post-rift subsidence (and therefore burial). Both of these factors are influenced, and are partly predictable by the detachment model. In particular, there may be substantial horizontal offset of both the maximum thermal anomaly and the locus of post-rift subsidence from the rift basin. Analysis of deep crustal geophysical data may aid in the interpretation of detachment geometry and, therefore, of the gross distribution of thermal and subsidence histories.

scholarly journals Basement structure of the Hontomín CO2 storage site (Spain) determined by integration of microgravity and 3D seismic data

2016 ◽  
pp. 1-37
Author(s):  
J. Andres ◽  
J. Alcalde ◽  
P. Ayarza ◽  
E. Saura ◽  
I. Marzán ◽  
...  
Keyword(s):  
Deep Structure ◽  
General Structure ◽  
Normal Faults ◽  
Storage Site ◽  
3D Seismic ◽  
Borehole Data ◽  
Structural Domains ◽  
Multidisciplinary Study ◽  
Half Graben ◽  
Main Fault

A multidisciplinary study has been carried out in Hontomín (Spain) to determine the basement structural setting/ geometry and that of the sedimentary succession of an area aimed to be the first Spanish pilot plant of CO<sub>2</sub> injection. An integration of coincident 3D seismic results, borehole data and unpublished microgravity 5 maps aims to reproduce the deep structure of the basement and to quantify the thickness of the Triassic Keuper evaporites. All datasets manage to clearly identify two main fault systems compartmentalizing the main structural domains into three differentiated blocks. These have been interpreted to be reactivated normal faults that have led to the formation of 10 the Hontomín dome. The general structure is characterized by a half-graben setting filled with thick Keuper evaporites (up to 2000 m thick) forming an extensional forced fold.

HALF-GRABEN MODEL FOR THE STRUCTURAL EVOLUTION OF THE FITZROY TROUGH, CANNING BASIN, AND IMPLICATIONS FOR RESOURCE EXPLORATION

1988 ◽  
Vol 28 (1) ◽  
pp. 76 ◽  
Author(s):  
B.J. Drummond ◽  
M.A. Etheridge ◽  
P.J. Davies ◽  
M.F. Middleton
Keyword(s):  
Structural Evolution ◽  
Passive Margin ◽  
Normal Faults ◽  
Canning Basin ◽  
North East ◽  
The North ◽  
Structural Style ◽  
Half Graben ◽  
Resource Exploration ◽  
Transfer Faults

The Fitzroy Trough is a north-west/south-east trending rift along the north-east margin of the Canning Basin. The major crustal extension in the trough occurred in the Middle Devonian to Early Carboniferous. Most idealised cross-sections show down-to-trough normal faults bounding both sides of the trough. In contrast, we show the trough to have a half- graben style, with one side a hinge zone or flexure, and the other side bounded by normal faults. Thus, the basin has marked structural asymmetry. The sense of asymmetry switches several times along strike with the hinged margin on the north-eastern margin in some places and the south-west margin in others. The switching in asymmetry occurs at transfer faults. This structural style is expected in extensional tectonic models where the extension occurs on a detachment surface and is typical of many continental and passive margin rifts. The asymmetry of the Palaeozoic structure has implications for resource exploration because of its influence on facies development in and subsequent structural evolution of the trough. Quite different syn-rift clastic and carbonate facies are expected on faulted and hinged margins of a half-graben. Post-rift subsidence will also be somewhat asymmetric, influencing the carbonate reef geometry in particular. Mesozoic deformation in the basin reactivated many of the Palaeozoic normal and transfer faults, and induced reverse slip up basement surfaces on the hinged margin segments.

scholarly journals Basement structure of the Hontomín CO<sub>2</sub> storage site (Spain) determined by integration of microgravity and 3-D seismic data

Solid Earth ◽  
2016 ◽  
Vol 7 (3) ◽  
pp. 827-841 ◽  
Author(s):  
Juvenal Andrés ◽  
Juan Alcalde ◽  
Puy Ayarza ◽  
Eduard Saura ◽  
Ignacio Marzán ◽  
...  
Keyword(s):  
Deep Structure ◽  
Normal Faults ◽  
Structural Domain ◽  
Data Sets ◽  
Storage Site ◽  
Borehole Data ◽  
Basement Structure ◽  
Multidisciplinary Study ◽  
Half Graben ◽  
Main Fault

<p><strong>Abstract.</strong> A multidisciplinary study has been carried out in Hontomín (Spain) to determine the basement structural setting, its geometry and the geometry of the sedimentary succession of an area aimed to be the first Spanish pilot plant for CO<sub>2</sub> storage. An integration of coincident 3-D seismic results, borehole data and unpublished microgravity data were used to reproduce the deep structure and topography of the basement and to quantify the thickness of the Triassic Keuper evaporites. The subsurface structure is characterized by a half-graben setting filled with Keuper evaporites (up to 2000<span class="thinspace"></span>m thick), forming an extensional forced fold. All data sets clearly identify two main fault systems, compartmentalizing the main structural domain into three differentiated blocks. These faults have been interpreted to be reactivated normal faults that have led to the formation of the Hontomín dome.</p>

scholarly journals MULTI-POLARIZATION FOR ANALYSIS OF GEOLOGICAL STRUCTURES AS FORMATION OF HYDROCARBON TRAPS CONTROLLER IN EAST JAVA BASIN

2020 ◽  
Vol 41 (2) ◽  
pp. 61-73
Author(s):  
Indah Crystiana ◽  
Hartono Hartono ◽  
Retnadi Heru Jatmiko ◽  
Taufan Junaedi
Keyword(s):  
Oil And Gas ◽  
Image Interpretation ◽  
Remote Sensing Data ◽  
Image Data ◽  
Research Area ◽  
Geological Structure ◽  
Normal Faults ◽  
Alos Palsar ◽  
Hydrocarbon Traps ◽  
Increasing Demand

The decline in oil reserves and the increasing demand for oil and gas energy led to the search for new reserves. The geological structure pattern used to know the pattern of distribution and formation of hydrocarbons traps in the East Java Basin is one of the important information that can be extracted through remote sensing data of multi-polarization system. The multi-polarization system of this study merged the \ Alos Palsar imagery with HH and HV polarization, and Sentinel Image polarized VV and VH. Processing both image data through calibration, multilook, speckle fi ltering, geometric correction and mosaic. Filtered imagery is composite and sharpening. The fi ltering technique use Lee 5x5 kernel fi lter and then continue with 5x5 median fi lter. The results of multi-polarization system image interpretation can be identifi ed by fold, thrust faults, normal faults, strike-slip faults, bedding, and closure structure. In the formation research area the structure lasted two periods, with the main emphasis N-S in the order of 1 and the main direction of the SW-NE direction in the order-2. The hydrocarbon traps and exploration targets can be distinguished in three zones (Zone A, Zone B, and Zone C). Closure in Zone A includes closures 3, 4, 5, 7, 8, 9, 10, 11, 22, 23, 24, 25, 26, 27, 28, 29, 30. Closure in Zone B includes closures 1, 2, 6, 12, 13, 14, 15, 16, 17, 31, 32. Closure on Zone C includes closure18, 19, 20, 21.

Tectonique synsedimentaire d'age cretace superieur en Tunisie nord orientale; blocs bascules et reorganisation des aires de subsidence

2000 ◽  
Vol 171 (4) ◽  
pp. 431-440 ◽  
Author(s):  
Lahcen Boutib ◽  
Fetheddine Melki ◽  
Fouad Zargouni
Keyword(s):  
Structural Analysis ◽  
Upper Cretaceous ◽  
Tectonic Activity ◽  
Normal Faults ◽  
Half Graben ◽  
Combined Movements ◽  
Basin Floor ◽  
Tunisian Atlas ◽  
Facies Variation ◽  
Regional Tectonics

Abstract Structural analysis of late Cretaceous sequences from the northeastern Tunisian Atlas, led to conclude on an active basin floor instability. Regional tectonics resulted in tilted blocks with a subsidence reorganization, since the Campanian time. These structural movements are controlled both by N140 and N100-120 trending faults. The Turonian-Coniacian and Santonian sequences display lateral thickness and facies variation, due to tectonic activity at that time. During Campanian-Maastrichtian, a reorganization of the main subsidence areas occurred, the early Senonian basins, have been sealed and closed and new half graben basins developed on area which constituted previously palaeohigh structures. These syndepositional deformations are characterized by frequent slumps, synsedimentary tilting materials, sealed normal faults and progressive low angle unconformities. These tilted blocks combined to a subsidence axis migration were induced by a NE-SW trending extensional regime. This extension which affects the Tunisian margin during the Upper Cretaceous, is related to the Tethyan and Mesogean rifting phase which resulted from the combined movements of the African and European plates.

APPLICATION OF A MULTIDIMENSIONAL DETERMINISTIC-STATISTICAL NUMERICAL CORRELATION MODEL TO REFINE THE STRUCTURE OF THE AS11 HORIZON OF THE ZAPADNO-KAMYNSKOYE FIELD

2021 ◽  
Vol 7 (3) ◽  
pp. 123-135
Author(s):  
Anatoly M. NIKASHKIN ◽  
Alexey A. KLIMOV
Keyword(s):  
Oil And Gas ◽  
Geological Structure ◽  
Correlation Model ◽  
Gas Reservoirs ◽  
Work Related ◽  
Correlation Models ◽  
Complex Geological Structure ◽  
Geophysical Information ◽  
Well Correlation ◽  
Clay Layers

One of the primary and significant tasks in the construction of geological models of oil and gas reservoirs and development facilities is the problem of correlation of productive layers. This task, as a rule, is reduced to the identification and areal tracing of presumably even-aged oil and gas strata, horizons, and layers characterized by clear boundaries between sand strata and clay layers overlapping them. The practice of work related to modeling the structure of oil and gas horizons, layers and strata indicates that the correlation is not always unambiguous. The ambiguity is especially noticeable when correlating strata characterized by a clinoform structure, one of the examples is the Achimov strata. The most reliable basis for well correlation is GIS materials and lithological features of the interlayers forming individual layers. Clay interlayers and clay strata separating productive deposits provide valuable information when choosing a correlation model in sedimentary sections. These interlayers are characterized by the greatest consistency in area and are most clearly displayed on geophysical diagrams by the nature of the drawings of GIS curves. However, even in this case, i. e. when using the entire accumulated volume of the most diverse lithological and field-geophysical information, the correlation models of the sections turn out to be different and often even opposite. In this paper, the authors had to face a similar situation when correlating the horizon AS11 of the Zapadno-Kamynskoye field. The paper describes a method for clarifying the position of the chops of the productive horizon of oil and gas deposits using a multidimensional deterministic-statistical numerical model of the correlation of sedimentary strata. The proposed approach allows us to uniquely determine the positions of the chops in the conditions of a complex geological structure of the object, high thin-layered heterogeneity. A concrete example shows the advantages of the proposed approach in comparison with the traditional one.

Sign in / Sign up

Export Citation Format

Share Document