PEMANFAATAN GLISERIN DARI RESIDU GLISERIN SEBAGAI PLASTICIZER UNTUK PEMBUATAN BIOPLASTIK DENGAN BAHAN BAKU PATI BONGGOL PISANG KEPOK

2017 ◽  
Vol 5 (4) ◽  
pp. 26-32 ◽  
Author(s):  
Azaria Robiana ◽  
M. Yashin Nahar ◽  
Hamidah Harahap
Keyword(s):  
Tensile Strength ◽  
Hydrogen Bonding ◽  
Fatty Acid ◽  
Maximum Yield ◽  
Sem Analysis ◽  
Water Molecules ◽  
Banana Weevil ◽  
Gelatinization Temperature ◽  
Recharge Area ◽  
Maximum Quantity

Glycerin residue is waste oleochemical industry that still contain glycerin. To produce quality and maximum quantity of glycerin, then research the effect of pH acidification using phosphoric acid. Glycerin analysis includes the analysis of pH, Fatty Acid and Ester (FAE), and analysis of the levels of glycerin. The maximum yield obtained at pH acidification 2 is grading 91,60% glycerin and Fatty Acid and Ester (FAE) 3,63 meq/100 g. Glycerin obtained is used as a plasticizer in the manufacture of bioplastics. Manufacture of bioplastics using the method of pouring a solution with varying concentrations of starch banana weevil (5% w/v and 7% w/v), variations of the addition of glycerin (1 ml, 3 ml, 5 ml and 7 ml), and a variety of gelatinization temperature (60°C, 70°C, and 80°C). Analysis of bioplastics include FTIR testing, tensile strength that is supported by SEM analysis. The results obtained in the analysis of FTIR does not form a new cluster on bioplastics starch banana weevil, but only a shift in the recharge area only, it is due to the addition of O-H groups originating from water molecules that enter the polysaccharide through a mechanism gelatinitation that generates interaction hydrogen bonding strengthened. The maximum tensile strength of bioplastics produced at a concentration of starch 7% w/v, 1 ml glycerine and gelatinization temperature of 80°C is 3,430 MPa. While the tensile strength bioplastic decreased with increasing glycerin which can be shown from the results of SEM where there is a crack, indentations and lumps of starch insoluble.

Study on the effect of protein buffer solution on hydrogen bonding of water molecules based on terahertz metamaterial absorber

Optik ◽  
2021 ◽  
Vol 238 ◽  
pp. 166771
Author(s):  
Jianjun Liu ◽  
Tiejun Li ◽  
Senquan Yan ◽  
Haoxiang Wen ◽  
Fan Ding
Keyword(s):  
Hydrogen Bonding ◽  
Metamaterial Absorber ◽  
Water Molecules ◽  
Buffer Solution

Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler

2021 ◽  
pp. 004051752110086
Author(s):  
MJ Suriani ◽  
SM Sapuan ◽  
CM Ruzaidi ◽  
DS Nair ◽  
RA Ilyas
Keyword(s):  
Tensile Strength ◽  
Surface Morphology ◽  
Flame Retardant ◽  
Tensile Properties ◽  
Magnesium Hydroxide ◽  
Building Materials ◽  
Epoxy Composite ◽  
Sem Analysis ◽  
Palm Fiber ◽  
Sugar Palm Fiber

This paper aims to study the surface morphology, flammability and tensile properties of sugar palm fiber (SPF) hybrid with polyester (PET) yarn-reinforced epoxy composite with the addition of magnesium hydroxide (Mg(OH)2) as a flame retardant. The composites were prepared by hybridized epoxy and Mg(OH)2/PET with different amounts of SPF contents (0%, 20%, 35% and 50%) using the cold press method. Then these composites were tested by horizontal burning analysis, tensile strength testing and scanning electron microscopy (SEM) analysis. The specimen with 35% SPF (Epoxy/PET/SPF-35) with the incorporation of Mg(OH)2 as a flame retardant showed the lowest burning rate of 13.25 mm/min. The flame took a longer time to propagate along with the Epoxy/PET/SPF-35 specimen and at the same time producing char. Epoxy/PET/SPF-35 also had the highest tensile strength of 9.69 MPa. Tensile properties of the SPF hybrid with PET yarn (SPF/PET)-reinforced epoxy composite was decreased at 50% SPF content due to the lack of interfacial bonding between the fibers and matrix. Surface morphology analysis through SEM showed uniform distribution of the SPF and matrix with less adhesion, which increased the flammability and reduced the tensile properties of the hybrid polymeric composites. These composites have potential to be utilized in various applications, such as automotive components, building materials and in the aerospace industry.

A New Organic-Inorganic Hybrid Based on L-Arginine and Polyoxoanion

2015 ◽  
Vol 1105 ◽  
pp. 335-338
Author(s):  
Qiong Wu ◽  
Jing Lu ◽  
Xiao Lin Ji ◽  
Tao Yu Zou ◽  
Zhen Fang Qiao ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Sodium Cation ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Hydrogen Bonding Interactions ◽  
Photocatalytic Activities ◽  
Metal Organic ◽  
Supramolecular Networks

Modifying polyoxometalates with organic and/or metal-organic moieties is a widely adopted method for broading the range of properties. In this work a new polyoxometalate constructed from Anderson-type polyoxoanions and L-arginine (Arg =L-arginine) molecules Na [CrMo6(OH)6O18]}(H2Arg)2·8H2O(1) has been synthesized via conventional method and characterized by routine techniques. Single-crystal X-Ray diffraction analysis shows that compound 1 is constructed by chiralL-arginine grafted Anderson-type clusters, sodium cation and water molecules which are further stabilized by hydrogen bonding interactions constitute 3D supramolecular networks. In addition, both antitumor behavior and photocatalytic activities of compound 1 were investigated.

scholarly journals Biocomposite of Cassava Starch Reinforced with Cellulose Pulp Fibers Modified with Deposition of Silica (SiO2) Nanoparticles

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Joabel Raabe ◽  
Alessandra de Souza Fonseca ◽  
Lina Bufalino ◽  
Caue Ribeiro ◽  
Maria Alice Martins ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Sol Gel ◽  
Fiber Surface ◽  
Sio2 Nanoparticles ◽  
Thermoplastic Starch ◽  
Cassava Starch ◽  
Sem Analysis ◽  
Pulp Fibers ◽  
Moisture Adsorption ◽  
Cellulose Pulp

Eucalyptuspulp cellulose fibers were modified by the sol-gel process for SiO2superficial deposition and used as reinforcement of thermoplastic starch (TPS). Cassava starch, glycerol, and water were added at the proportion of 60/26/14, respectively. For composites, 5% and 10% (by weight) of modified and unmodified pulp fibers were added before extrusion. The matrix and composites were submitted to thermal stability, tensile strength, moisture adsorption, and SEM analysis. Micrographs of the modified fibers revealed the presence of SiO2nanoparticles on fiber surface. The addition of modified fibers improved tensile strength in 183% in relation to matrix, while moisture adsorption decreased 8.3%. Such improvements were even more effective with unmodified fibers addition. This result was mainly attributed to poor interaction between modified fibers and TPS matrix detected by SEM analysis.

scholarly journals Pentaaqua(1H-benzimidazole-5,6-dicarboxylato-κN3)cobalt(II) pentahydrate

2009 ◽  
Vol 65 (6) ◽  
pp. m702-m702 ◽  
Author(s):  
Wen-Dong Song ◽  
Hao Wang ◽  
Shi-Jie Li ◽  
Pei-Wen Qin ◽  
Shi-Wei Hu
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Organic Ligand ◽  
Octahedral Geometry ◽  
Mononuclear Complex ◽  
Distorted Octahedral Geometry ◽  
Water Molecules ◽  
Supramolecular Network ◽  
Hydrogen Bonding Interactions ◽  
Distorted Octahedral

In the title mononuclear complex, [Co(C9H4N2O4)(H2O)5]·5H2O, the CoIIatom exhibits a distorted octahedral geometry involving an N atom of a 1H-benzimidazole-5,6-dicarboxylate ligand and five water O atoms. A supramolecular network is generated through intermolecular O—H...O hydrogen-bonding interactions involving the coordinated and uncoordinated water molecules and the carboxyl O atoms of the organic ligand. An intermolecular N—H...O hydrogen bond is also observed.

scholarly journals Structure and hydrogen bonding of the hydrated selenite and selenate ions in aqueous solution

2014 ◽  
Vol 43 (17) ◽  
pp. 6315-6321 ◽  
Author(s):  
Lars Eklund ◽  
Ingmar Persson
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Bonding ◽  
Free Electron ◽  
Electron Pair ◽  
Bound Water ◽  
Water Molecules ◽  
Hydration Sphere ◽  
Free Electron Pair

The selenite ion has an asymmetric hydration sphere with loosely electrostatically bound water molecules outside the free electron pair.

SYNTHESIS AND CHARACTERISATION OF WOVENROVING GLASS MAT FOR EPOXYCOMPOSITES

2020 ◽  
Vol 15 (4) ◽  
Author(s):  
Mahesh Mallampati ◽  
Sreekanth Mandalapu ◽  
Govidarajulu C
Keyword(s):  
Tensile Strength ◽  
Glass Fiber ◽  
Low Cost ◽  
Weight Ratio ◽  
High Strength ◽  
Hardness Test ◽  
Industrial Applications ◽  
Sem Analysis ◽  
Low Thermal Expansion ◽  
Manufacturing Techniques

The composite materials are replacing the traditional materials because oftheir superior properties such as high tensile strength, low thermal expansion, high strength to weight ratio, low cost, lightweight, high specific modulus, renewability and biodegradability which are the most basic & common attractive features of composites that make them useful for industrial applications. The developments of new materials are on the anvil and are growing day by day. The efforts to produce economically attractive composite components have resulted in several innovative manufacturing techniques currently being used in the composites industry. Generally, composites consist of mainly two phases i.e., matrix and fiber. In this study, woven roving mats (E-glass fiber orientation (-45°/45°,0°/90°, - 45°/45°),UD450GSM)were cut in measured dimensions and a mixture of Epoxy Resin (EPOFINE-556, Density-1.15gm/cm3), Hardener (FINE HARDTM 951, Density- 0.94 gm/cm3) and Acetone [(CH3)2CO, M= 38.08 g/mol] was used to manufacture the glass fiber reinforced epoxy composite by hand lay-up method. Mechanical properties such as tensile strength, SEM analysis, hardness test, density tests are evaluated.

scholarly journals Mechanical Properties of Oil Palm Shell Composites

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
J. Sahari ◽  
M. A. Maleque
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Oil Palm ◽  
Volume Fraction ◽  
Unsaturated Polyester ◽  
Tensile Modulus ◽  
Sem Analysis ◽  
Palm Shell ◽  
Pull Out ◽  
Oil Palm Shell

The mechanical properties of oil palm shell (OPS) composites were investigated with different volume fraction of OPS such as 0%, 10%, 20%, and 30% using unsaturated polyester (UPE) as a matrix. The results presented that the tensile strength and tensile modulus of the UPE/OPS composites increased as the OPS loading increased. The highest tensile modulus of UPE/OPS was obtained at 30 vol% of OPS with the value of 8.50 GPa. The tensile strength of the composites was 1.15, 1.17, and 1.18 times higher than the pure UPE matrix for 10, 20, and 30 vol% of OPS, respectively. The FTIR spectra showed the change of functional group of composites with different volume fractions of OPS. SEM analysis shows the filler pull-out present in the composites which proved the poor filler-matrix interfacial bonding.

scholarly journals Two New Polyiodides in the 4,4´-Bipyridinium Diiodide/Iodine System

2012 ◽  
Vol 67 (1) ◽  
pp. 5-10
Author(s):  
Guido J. Reiss ◽  
Martin van Megen
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Complex I ◽  
The Other ◽  
Cyclic Dimer ◽  
Water Molecules ◽  
Spectroscopic Methods ◽  
Halogen Bonds ◽  
One Dimensional ◽  
Hydroiodic Acid

The reaction of bipyridine with hydroiodic acid in the presence of iodine gave two new polyiodide-containing salts best described as 4,4´-bipyridinium bis(triiodide), C10H10N2[I3]2, 1, and bis(4,4´-bipyridinium) diiodide bis(triiodide) tris(diiodine) solvate dihydrate, (C10H10N2)2I2[I3]2 · 3 I2 ·2H2O, 2. Both compounds have been structurally characterized by crystallographic and spectroscopic methods (Raman and IR). Compound 1 is composed of I3 − anions forming one-dimensional polymers connected by interionic halogen bonds. These chains run along [101] with one crystallographically independent triiodide anion aligned and the other triiodide anion perpendicular to the chain direction. There are no classical hydrogen bonds present in 1. The structure of 2 consists of a complex I144− anion, 4,4´-bipyridinium dications and hydrogen-bonded water molecules in the ratio of 1 : 2 : 2. The I144− polyiodide anion is best described as an adduct of two iodide and two triiodide anions and three diiodine molecules. Two 4,4´-bipyridinium cations and two water molecules form a cyclic dimer through N-H· · ·O hydrogen bonds. Only weak hydrogen bonding is found between these cyclic dimers and the polyiodide anions.

Sign in / Sign up

Export Citation Format

Share Document