scholarly journals Analisis Kinerja Website Dinas Komunikasi dan Informatika Menggunakan Metode Pieces

2021 ◽  
Vol 10 (2) ◽  
pp. 155-161
Author(s):  
Nurul Huda ◽  
Megawaty Megawaty
Keyword(s):  
Test Results ◽  
Performance Information ◽  
Good Efficiency ◽  
The Public ◽  
Analysis Measurement ◽  
Measurement Results ◽  
Economic Control ◽  
Cover Up ◽  
Speed Grade

The Diskominfo website is a means of communication to convey various information to the wider community. The existence of a website helps at the same time cover up the government's limitations in the dissemination of various information so that the public does not experience information gaps. This website is analyzed using the Pieces method such as performance, information, economic, control, efficiency, and service by testing using the GT Matrik Tools and Google Transparency Report, while the test results obtained after the analysis are obtained that the average page speed grade is 27%. or in grade F. This means that the quality of the Diskominfo website based on the index generated by Google is still very low, the same thing is also produced by YSlow Grade from Yahoo where the average YSlow Grade is 66% or grade D. The low quality of the web will certainly affect website performance. While testing based on the results of control measurements, the Diskominfo website is safe for public visits. The Diskominfo website has good efficiency, because the existing system can be used properly and can also produce the expected output. In the analysis measurement results, the menu structure that is built can be seen from its initial purpose, which is to provide services to the community, however, this service is still not optimal because the content of the service is not well filled. D. Rendahnya kualitas web tersebut tentu akan mempengaruhi kinerja website. Sedangkan pengujian Berdasarkan hasil pengukuran control, website Diskominfo aman untuk dikunjungi oleh masyarakat.  Website Diskominfo telah memiliki efisiensi yang baik, karena sistem yang ada telah dapat digunakan dengan baik dan juga dapat menghasilkan output yang diharapkan.  Pada hasil pengukuran analisis bahwa struktur menu yang dibangun dapat dilihat tujuan awalnya yaitu dapat memberikan pelayanan kepada masyarakat, Akan tetapi pelayanan ini masih belum maksimal dikarenakan konten pelayanan belum banyak terisi dengan baik.

PENGARUH SISTEM INFORMASI AKUNTANSI DAN TEKNOLOGI INFORMASI TERHADAP KINERJA PELAYANAN DI SEKTOR PUBLIK

2011 ◽  
Author(s):  
Hari Wahyudi
Keyword(s):  
Information Systems ◽  
Public Sector ◽  
Service Sector ◽  
Accounting Information ◽  
Service Performance ◽  
Test Reliability ◽  
Test Results ◽  
Performance Information ◽  
Accounting Information Systems ◽  
The Public

This study aimed to investigate the influence of accounting information systems and technology to service performance information on the public sector. Samples in this study were RS. M. Djamil in Padang, PLN, PDAM in Padang and taken at random (purposive sampling). Of the 122 questionnaires had been distributed only 85 questionnaires could be processed. Test Equipment used to test the validity of this study is the test, Test Reliability, Test for multicollinearity, coefficient Determination Test, and the t test, results of this study are: (a) The first hypothesis tests can be concluded that the accounting information systems has significant influence on performance in service sector public. (2) Information technology does not significantly influence the performance of services in the public sector.

FAKTOR-FAKTOR YANG MEMPENGARUHI AUDIT DELAY PADA PERUSAHAAN MANUFAKTUR YANG GO PUBLIK DI BEI

2015 ◽  
Vol 11 (2) ◽  
pp. 117
Author(s):  
Astuti Yuli Setyani
Keyword(s):  
Stock Exchange ◽  
Secondary Data ◽  
Financial Statements ◽  
Test Results ◽  
Public Accounting ◽  
Variable Size ◽  
Accounting Firms ◽  
Accounting Firm ◽  
The Public

"> This study aims to examine empirically the effect of firm size, solvency, profitability, and thequality of public accounting firms (KAP) to the audit delay on manufacturing companieslisted in Indonesia Stock Exchange. This study focuses on companies listed on the IndonesiaStock Exchange. The data used are secondary data, the audited financial statements of 47companies listed in Indonesia Stock Exchange in 2009-2012. To test the hypothesis,performed multiple regression analysis that begins classic assumption test includingnormality, linearity, multicollinearity, heteroscedasticity and autocorrelation. The data usedhas met all the classical assumptions. Partial test results show that the variable size andvariable quality of the public accounting firm (KAP) that affect audit delay, while variablesolvency and profitability variable does not affect the audit delay.Keywords: audit delay, KAP, company’s size, profitability, solvency

PENGUJIAN PERFORMA DAN TINGKAT STRESS PADA WEBSITE RESMI PEMERINTAH (STUDI KASUS: KAB.SUBANG, KAB.BANDUNG BARAT, DAN KAB.CIANJUR)

2021 ◽  
Vol 5 (1) ◽  
pp. 132
Author(s):  
Carkiman Carkiman ◽  
Shandy Rikmansyah ◽  
Sandi Mahardi ◽  
Muhammad Adi Kuncoro
Keyword(s):  
Test Results ◽  
Display Time ◽  
The Public ◽  
Government Sector ◽  
District Government ◽  
Access Information ◽  
The Government ◽  
Almost All ◽  
Government Website

Melayani  masyarakat  ataupun  publik  dengan  menggunakan media teknologi informasi dan komunikasi berbasis  website  hampir  dilakukan  oleh  semua  sektor, termasuk sektor pemerintah seperti halnya pemerintahan ditingkat kabupaten. pemerintah kabupaten yang sudah memiliki website resmi diantaranya kab.subang  (subang.go.id), kab.bandung barat (bandungbaratkab.go.id), dan kab.cianjur (cianjurkab.go.id) yang  menjadi  fokus  penelitian ini. Keberadaan  website  resmi  milik  pemerintah, perlu dilakukan  pengukuran  kinerja  dan serta kualitas dari website tersebut dengan menggunakan alat uji  GTMetrix, WebPageTest, dan WAVE. Berdasarkan hasil pengujian dengan GTMetrix, maka website resmi pemerintah kabupaten  subang termasuk  kategori  lambat  dengan  waktu  tampil  18.9s,  sedangkan  untuk  website resmi pemerintah kabupaten cianjur  dan  kabupaten  bandung barat dengan waktu tampil  33.5s dan  31.0s  termasuk  kategori sangat  lambat. Berdasarkan  hasil  pengujian  dengan WebPagetest,  maka  website  resmi pemerintah kabupaten  Cianjur  memiliki  nilai performa baik dengan waktu tampil 20.015s dibandingkan dengan  kabupaten  subang dengan waktu tampil 65.871s dan  bandung  barat  dengan  waktu tampil  39.574s. Berdasarkan  hasil pengujian dengan WAVE, maka website resmi pemerintah  kabupaten  Bandung Barat memiliki nilai error sedikit  dengan jumlah  9 error dibandingkan dengan  kabupaten  subang dengan jumlah  61  error dan  kabupaten  cianjur  dengan  jumlah  168 error. Penelitian ini menyatakan bahwa dengan  fokus load time dari ketiga website resmi pemerintah kabupaten  tersebut, maka Semakin  kecil  angka  loadtime  yang dihasilkan, maka  kinerja  website  semakin  baik  dan  juga  Kualitas  sebuah  website  sangat  berpengaruh  terhadap minat    pengguna  ataupun  masyarakat  untuk  mengakses  website tersebut. saran  yang  dapat  diberikan berdasarkan hasil pengujian diatas adalah  meningkatkan  kinerja website  resmi pemerintah  terlebih  difokuskan  pada  load time website, dan  dari ketiga website resmi tersebut parameter security score nilainya F  itu  artinya  perlu ditingkatkan keamanan dari website milik pemerintah tersebut, sehingga dapat memberikan  kenyamanan dan  minat  pengguna untuk  mengakses  lnformasi  yang  terdapat  pada website  resmi  pemerintah  daerah  tersebut. Serving the public or the public by using information technology and website-based communication media is practiced by almost all sectors, including the government sector as well as the district level government. District governments that already have official websites include Kab.subang (subang.go.id), Kab.bandung Barat (bandungbaratkab.go.id), and Kab.cianjur (cianjurkab.go.id) which are the focus of this research. The existence of an official government website, it is necessary to measure the performance and quality of the website using the GTMetrix, WebPageTest, and WAVE test tools.  Based on the results of testing with GTMetrix, the official website of the Subang district government is in the slow category with a display time of 18.9s, while the official websites of the Cianjur regency and West Bandung regencies with a display time of 33.5s and 31.0s are in the very slow category. Based on the results of testing with WebPagetest, the official website of the Cianjur regency government has a good performance score with a display time of 20,015s compared to Subang district with a display time of 65,871s and Bandung Barat with a display time of 39,574s. Based on the results of testing with WAVE, the official website of the West Bandung district government has a slight error value with 9 errors compared to Subang district with 61 errors and Cianjur district with 168 errors. This research states that with the focus on the load time of the three official websites of the regency government, the smaller the load time is generated, the better the performance of the website and the quality of a website greatly affects the interest of users or the public to access the website. The suggestion that can be given based on the test results above is to improve the performance of the official government website, especially focused on the load time of the website, and from the three official websites the parameter of the security score is F, which means that the security of the government-owned website needs to be increased, so that it can provide user comfort and interest. to access information contained on the official website of the local governmen

scholarly journals Effects Rahn, Ijaroh, Customer Satisfaction Through Quality of Service in. PT. Sharia Rural Bank Syarikat Madani

2018 ◽  
Vol 7 (2.29) ◽  
pp. 1026
Author(s):  
Chablullah Wibisono ◽  
Rahmad Budi Harto
Keyword(s):  
Customer Satisfaction ◽  
Banking Sector ◽  
Banking System ◽  
Path Coefficient ◽  
Test Results ◽  
Strategic Investment ◽  
The Public ◽  
Credit Financing

Community desire of a product needs the companion for business credit financing, disposal venture capital partners for micro s and macro businesses and banking sector needs to increase every year, so the role of the strategic investment partner is so decisive.  As the products business development, Since 1991 Islamic banking system has served the public with "Syariah" products. To achieve these objectives, the role of the corporate world become extremely important to give influences in society economy, so better services to achieve customer satisfaction in banking area is needed.The data in this research was conducted by spreading some questionnaires and taking the entire sample of 150 respondents of PT. SRB SayrikatMadani, and then the Data were tested by using Path analysis. The test results showed that the variable of Rhan (X1) Customer Satisfaction (Y) through Quality Services (X3) has path coefficient value 0554 t-count = 0223 while t-table 1661 (α = 0.05) and 2367 (α = 0, 01). It showed that the value of t-count <t table, it can be concluded that the path coefficient is not significant. Ijaroh (X2) The customer Satisfaction (Y) through Services Quality (X3) has path coefficient 0.315 t-count = 0.016 while t-table 1661 (α = 0.05) and 2367 (α = 0.01). in this case, t count <t table, it can be concluded that the path coefficient is not significant.  

scholarly journals Perancangan Alat Pendeteksi Kualitas Minyak Goreng Dengan Parameter Viskositas Dan Densitas Mengggunakan Metode Fuzzy Logic

2021 ◽  
Vol 11 (1) ◽  
pp. 22-28
Author(s):  
Alex Surapati ◽  
Azam Zyaputra ◽  
Reza Satria Rinaldi
Keyword(s):  
Fuzzy Logic ◽  
Fuzzy Inference System ◽  
Fuzzy Inference ◽  
Oil Quality ◽  
Test Results ◽  
Inference System ◽  
The Public ◽  
Cooking Oil ◽  
Market Needs

AbstrakThe quality of cooking oil sold in the market needs to be checked to ensure its health. cooking oil quality detector is designed to make it easier for the public to know the quality of the cooking oil. The research method is to make tools and conduct testing. The test is carried out by measuring the viscosity and density using the tool made. When the viscosity of 985 fuzzification was "good", and the density was 542.93 Kg/mL of "good" fuzzification, the fuzzification was processed by a fuzzy inference system, then defuzzification occurred in the form of oil quality results. fried "good". When the viscosity of 932 fuzzification is "sufficient", and the density is 618.69 Kg/mL of "moderate" fuzzification, a fuzzy inference system occurs, a defuzzification process is "moderate", when the viscosity of 926 fuzzification is "bad", and a density of 631.31 Kg/mL fuzzification "bad", fuzzy inference system occurs, defuzzification process occurs with "bad" results. To ensure that the results are accurate, the sample is taken to the BPOM which measures free fatty acids. From the BPOM test results converted to viscosity and density. In order to obtain an accurate conversion value between viscosity and density, it is recommended that a large number of samples be tested..Keywords: viscosity, density, fuzzy logic

Involuntary Benchmarking and Quality Improvement: The Effect of Mandated Public Disclosure on Hospitals

1997 ◽  
Vol 12 (3) ◽  
pp. 315-346 ◽  
Author(s):  
John H. Evans ◽  
Yuhchang Hwang ◽  
Nandu Nagarajan ◽  
Karen Shastri
Keyword(s):  
Market Share ◽  
Health Care Cost ◽  
Public Disclosure ◽  
Quality Improvements ◽  
Performance Information ◽  
The Public ◽  
Financial Condition ◽  
Competitive Environments ◽  
Nonfinancial Performance

This paper documents the responses of Pennsylvania hospitals to the public dissemination by the Pennsylvania Health Care Cost Containment Council (PHC4) in 1990 of mandated hospital disclosures of financial and nonfinancial performance information. We find that PHC4's relative performance disclosures had an effect in that hospitals that performed poorly on patient quality of care, as measured by mortality outcomes, reacted by making significant improvements in this measure by 1992, although this was accompanied by lower reductions in length of stay. Further, we find that the improvements in mortality outcomes were more marked for DRGs in more competitive environments and for hospitals that ranked higher on financial condition in the year of disclosure. Additionally, the rationale for these costly quality improvements in the period following the disclosure appears to be related to market share, that is, poorly performing hospitals lost, whereas better performing hospitals gained in market share.

Evaluators and the enhanced Commonwealth performance framework

2018 ◽  
Vol 18 (3) ◽  
pp. 141-164 ◽  
Author(s):  
David Morton ◽  
Brad Cook
Keyword(s):  
Public Service ◽  
Program Theory ◽  
Performance Information ◽  
Public Governance ◽  
The Public ◽  
Performance Framework ◽  
Input And Output ◽  
Evaluation Community ◽  
Public Resources

The enhanced Commonwealth performance framework was introduced on 1 July 2015 under the Public Governance, Performance and Accountability Act 2013. It should allow the Australian Parliament and public to understand the proper use of public resources, whether the accountable authorities of Commonwealth entities and companies are achieving their purposes and who is benefitting from Commonwealth activity. Demonstrating the achievement of purposes amounts to demonstrating outcomes and impacts. It requires Commonwealth entities and companies to move past an over-reliance on input- and output-focused performance measures. There is a clear role for evaluators in helping entities make this important adjustment. The opportunities lie in helping a larger cross-section of the Commonwealth public service understand and use the evaluators’ toolbox – for example, program theory and qualitative analysis – to improve the quality of published performance information available to the Commonwealth’s stakeholders. The evaluation community has the opportunity to become a centre of key expertise, and to make a critical contribution to building the capability of ‘performance professionals’ across the public sector.

scholarly journals OPINION ANALYSIS GOING CONCERN THROUGH AUDITOR QUALITY AND AUDITOR EXPERIENCE

2018 ◽  
Vol 12 (1) ◽  
pp. 65-73
Author(s):  
Retno Wulandari ◽  
Ida Nuryana
Keyword(s):  
Audit Quality ◽  
Test Reliability ◽  
Test Results ◽  
Accounting Firm ◽  
The Public ◽  
Going Concern ◽  
Auditor Quality ◽  
Going Concern Opinion ◽  
Measuring Tool

The research was conducted in Malang City area with auditor as the population while the sample with pursposive sampling while the data analysis used is variable test with linkert scale and using SPPS statitisk test. In this study conducted at the Public Accounting Firm in Malang, showed that by using validity test, reliability, assumption Heterokedastisitas, multicolinierity assumption test, hypothesis testing simultaneously and partial and autocorrelation test showed that the questionnaire used by the researchers is feasible as a measuring tool for analysis in this study and provide consistent results. In the test results Hypothesis gives results that reject Ho and accept the hypothesis of research Ha, so that the auditor experience and audit quality together provide a significant effect on going concern opinion. Partial experience does not affect the giving of going concern opinion while the quality of audit partially affect the giving of going concern opinion.

scholarly journals Evaluation of measurement uncertainty of impact resistance of ceramic brick

2020 ◽  
Vol 185 ◽  
pp. 04040
Author(s):  
Chen Weizhe
Keyword(s):  
Measurement Uncertainty ◽  
Ceramic Tile ◽  
Impact Resistance ◽  
Final Conclusion ◽  
Test Results ◽  
Ceramic Brick ◽  
Sources Of Uncertainty ◽  
Related Data ◽  
Measurement Results

As the economy continues to grow rapidly, people's requirements for product quality are increasing year by year, including ceramic tile products, which, as a typical building material product, are widely used in various large and small buildings. The quality of ceramic tile products is mainly evaluated through inspection and testing. As an important part of the test results, measurement uncertainty is an important parameter that characterizes the reliability of the measurement results. This article analyzes the sources of uncertainty in the measurement of ceramic tile impact resistance, uses the measurement results and related data, and draws the final conclusion.

scholarly journals Kajian Variasi Ketebalan Tumpukan Fermentasi Terhadap Kualitas Pliek U dan Minyak Pliek Yang Dikeringkan Dengan Alat Pengering Tipe Hohenheim

2017 ◽  
Vol 2 (2) ◽  
pp. 386-395
Author(s):  
Muhammad Al Hasani ◽  
Zulfahrizal Zulfahrizal ◽  
Raida Agustina
Keyword(s):  
Water Content ◽  
Fatty Acid Content ◽  
Coconut Oil ◽  
Thickness Variation ◽  
Test Results ◽  
The Public ◽  
Cooking Oil ◽  
The People ◽  
Equipment Type

Abstrak. Masyarakat Aceh secara turun-temurun telah menggunakan daging buah dan minyak kelapa terfermentasi (diperam) yang diproses secara tradisional. Minyak kelapa yang dihasilkan salah satunya dikenal dengan nama minyak pliek  yang digunakan sebagai minyak goreng dan juga dimanfaatkan sebagai obat untuk sakit kepala, luka, menurunkan panas, sakit persendian, dan sakit perut. Ampas yang diperoleh setelah pengepresan disebut pliek u, yang digunakan sebagai bumbu masakan.  Tujuan dari penelitian ini adalah mengkaji kualitas dari pliek u dan minyak pliek dengan variasi ketebalan tumpukan fermentasi 30 cm, 20 cm, dan 10 cm. Hasil penelitian menunjukkan bahwa pliek u dan minyak pliek yang paling diterima oleh panelis adalah ketebalan tumpukan fermentasi 30 cm. Berdasarkan hasil penelitian jumlah rendemen tertinggi pliek u dan minyak pliek terdapat pada ketebalan 30 cm. Kadar air setelah fermentasi dan kadar air pliek u yang dihasilkan pada setiap variasi ketebalan 30 cm, 20 cm dan 10 cm relatif sama, yakni berkisaran antara 57,6% – 60,0% untuk kadar air setelah fermentasi dan 4,4% – 6,5% untuk kadar air pliek u. Hasil pH pliek u lebih besar dibandingkan pH setelah fermentasi, namun nilai yang dihasilkan tidak melebihi angka 7 (netral), hal ini berlaku untuk setiap variasi ketebalan bahan. Secara keseluruhan minyak pliek yang dihasilkan masih memenuhi standar SNI. Minyak pliek yang dihasilkan dari ketebalan 30 cm yang memiliki kualitas terbaik karena memiliki kadar asam lemak bebas  terkecil yaitu sebesar 0,39%. Hasil pengujian organoleptik terhadap pliek u dan minyak pliek dapat disimpulkan bahwa masyarakat lebih menerima pliek u dan minyak pliek dengan ketebalan fermetasi 30 cm.Study on Thickness Variation Fermented of Quality Pliek U and Oil Pliek to Drained By Equipment Type Dryer HohenheimAbstract. The people of Aceh for generations have used fruit pulp and palm oil fermented (ripened) are processed traditionally. Coconut oil is produced by one of them known as pliek oil that is used as a cooking oil and is also used as a remedy for headaches, cuts, lower the heat, joint pain, and abdominal pain. The pulp obtained after pressing is name (oil pliek), which is used as a spice in cooking. The purpose of this study is to assess the quality of pliek u and oil pliek with thickness variation heap of fermentation 30 cm, 20 cm and 10 cm. The results showed that pliek u and oil pliek the most accepted by the panelists is 30 cm thick pile fermentation. Based on the results of the study the number of the highest yield and oil pliek pliek u are at a thickness of 30 cm. The water content after fermentation and water content pliek u generated on every variation of the thickness of 30 cm, 20 cm and 10 cm are relatively the same, ie ranging between 57.6% - 60.0% for water content after fermentation and 4.4% - 6 , 5% for water content pliek u. Results pliek u pH greater than pH after fermentation, but the resulting value does not exceed the number 7 (netral), this proses every variation of the thickness of the material. Overall oil produced pliek still meet ISO standards. Pliek oil produced from a thickness of 30 cm that has the best quality because it has the smallest free fatty acid content is 0.39%. The test results organoleptic pliek poil can be concluded that the public is receiving pliek u and oil fermetasi pliek with a thickness of 30 cm.

Sign in / Sign up

Export Citation Format

Share Document