scholarly journals A comparative study on chemical and cooking properties of abiotic stress tolerant and other high yielding rice varieties in Bangladesh

2018 ◽  
Vol 42 (4) ◽  
pp. 673-679
Author(s):  
A Matin ◽  
MA Siddiquee ◽  
S Akther ◽  
MK Alam ◽  
MS Ali
Keyword(s):  
Abiotic Stress ◽  
Comparative Study ◽  
Normal Condition ◽  
Amylose Content ◽  
Cooking Time ◽  
Elongation Ratio ◽  
Rice Varieties ◽  
Cooking Properties

The experiment was conducted to know the chemical and cooking properties of nineteen BRRI released high yielding rice varieties (HYVs) including salinity, drought and submergence tolerant varieties. All the rice varities were grown in normal condition. Among the HYVs, amylose content of the varieties range from 19 to 27.0% and BRRI dhan47 contained the highest amylose content (27%). The highest amount of protein (9.3%) was found in BRRI dhan56 followed by BRRI dhan42 (9%) and BRRI dhan43 (8.8%). Alkali spreading value ranged from 3.0 to 7.0. Maximum cooking time (20.5 min.) was required in the variety of BRRI dhan40. Alkali spreading value was found significantly and negatively correlated with cooking time. The kernel elongation ratio was greater than 1.1 in all the varieties except BRRI dhan62. The imbibition ratio was greater than 3.0 in all the varieties except BRRI dhan43 and BRRI dhan61. There were no significant differences between non-abiotic and abiotic stress tolerant varities in respect of chemical and cooking properties because all varities were grown in normal condition.Bangladesh J. Agril. Res. 42(4): 673-679, December 2017

scholarly journals Cooking and functional properties of parboiled milled local rice marketed in the south-east zone of Nigeria

2020 ◽  
Vol 9 (2) ◽  
pp. 319-331
Author(s):  
Chinenye E. Azuka ◽  
Iro Nkama ◽  
Chinwendu R. Eze ◽  
Nahemiah Danbaba ◽  
Felix U. Asoiro
Keyword(s):  
Functional Properties ◽  
Amylose Content ◽  
Expansion Ratio ◽  
Grain Weight ◽  
Elongation Ratio ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Gel Consistency ◽  
High Amylose ◽  
Locally Grown

Imported rice is perceived to have better cooking properties than locally grown rice in Nigeria and it has increased its market share while reducing patronage for local rice. Rice in Nigeria has many applications, including consumption as whole cooked grain or dumpling or use as an adjunct in making beverages. Eighteen varieties of parboiled milled local rice and three imported rice varieties, coded Ip1, Ip2 and Ip3, were studied for their cooking and functional properties using standard methods. There was a significant (p<0.05) increase in the dimensions of all the rice varieties when cooked. There was a 25 g increase in the grain weight and an elongation ratio of more than 1.26 in all the rice varieties. Ghesua had the highest cooked grain weight (68.67 g) while Omor-Mas (6.00) and R-Bus (6.00) had the highest volume expansion ratio (VER). The VER was more than 3.00 for all the rice varieties. All the local rice varieties imbibed less water (17.67-25.33 ml) compared to the imported rice varieties (26.00-27.67ml) before they reached their optimum cooking time. The imported rice varieties were of soft gel consistency (89.67-73.50 mm) and intermediate amylose content (20.71-23.14 %) while the local rice varied in amylose and gel consistency. Abakiliki-Mas (27.00 mm) and R-8 (33.67 mm) were of hard gel-consistency, intermediate (21.11 %) and high amylose (27.21 %) content respectively and have not been exploited although they would be appropriate for making canned rice, dry mixes and rice-noodles.

scholarly journals Nutritional and cooking properties of some rice varieties in Noakhali region of Bangladesh

2019 ◽  
Vol 6 (2) ◽  
pp. 235-243
Author(s):  
Kazi Ishrat Anjum ◽  
Mohammad Anowar Hossain
Keyword(s):  
Saline Soil ◽  
Zinc Content ◽  
Soil Condition ◽  
Expansion Ratio ◽  
Elongation Ratio ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Coastal Belt ◽  
Iron And Zinc ◽  
Gel Consistency

The experiment was conducted to evaluate the nutritional and cooking properties of some rice varieties collected from the farmers of Noakhali region of Bangladesh. Noakhali district is situated in the coastal belt of the country and this area also termed as ‘char’ land. All of the selected varieties were grown in saline soil condition. For assessment of nutritional quality, protein, iron and zinc content were estimated. The protein, iron and zinc content ranged from 6.75 to 8.63%, 7.09 to 9.84ppm, 24.52 to 32.34ppm, respectively. The highest amount of protein, iron and zinc were found in Kajalshail variety. All of the rice varieties showed significant variation for all cooking properties studied in this work. The volume expansion ratio (VER) was varied from 1.89 to 2.20. The kernel elongation ratio (KER) was greater than 1.1 in all varieties except Carandol. On cooking Kajalshail variety exhibited highest VER and KER 2.20 and 1.19, respectively. Based on the gel consistency (GC) test, the average GC values ranged from 39.73 to 92.53mm and varieties were categorized as hard, medium and soft. On the basis of alkali spreading value (ASV) the varieties were classified into three groups namely- low, intermediate and high. ASV was found significantly and negatively correlated with gelatinization temperature (GT). The Kajalshail variety was found to have the better nutritional and cooking quality among all varieties. Res. Agric., Livest. Fish.6(2): 235-243, August 2019

Melting the secrets of gelatinisation temperature in rice

2010 ◽  
Vol 37 (5) ◽  
pp. 439 ◽  
Author(s):  
Rosa P. Cuevas ◽  
Venea D. Daygon ◽  
Henry M. Corpuz ◽  
Leilani Nora ◽  
Russell F. Reinke ◽  
...  
Keyword(s):  
Amylose Content ◽  
Oryza Sativa L ◽  
Length Distribution ◽  
Cooking Time ◽  
Scanning Calorimetry ◽  
Rice Varieties ◽  
Chain Length Distribution ◽  
Chain Lengths ◽  
Major Grouping ◽  
Upper Boundary

Gelatinisation temperature (GT) is one of the key traits measured in programs for breeding rice (Oryza sativa L.). It is commonly estimated by the alkali spreading value (ASV), and less commonly by differential scanning calorimetry (DSC). Using a diverse set of germplasm, it was determined that DSC values associate poorly with ASV, are not correlated with amylose content but correlate with cooking time. Rice varieties are traditionally grouped into three classes of GT based on ASV: high, intermediate and low. However, the distribution of DSC values of 4000 samples shows only two classes: high and low. Large differences in the distributions of chain lengths synthesised by starch synthase IIa (SSIIa) support the two classes as the major grouping, two haplotypes associating with each peak. Each peak of DSC values spanned 10°C. The chain length distribution of the amylopectin molecules from varieties at the upper boundary of each peak showed significantly more chains that span both the crystalline and amorphous lamellae of a cluster than varieties at the other end of that distribution. Improved varieties, classified as intermediate GT by ASV, belong to both of the classes defined by DSC, implying that some enzyme, other than SSIIa is involved in intermediate GT.

scholarly journals Milling, Nutritional, Physical and Cooking Properties of Four Basmati Rice Varieties

2018 ◽  
Vol 4 ◽  
pp. 18-24
Author(s):  
Pravin Ojha ◽  
Omkar Chaudhary ◽  
Ujjwol Subedi ◽  
Roman Karki ◽  
Durga Man Singh Dongol
Keyword(s):  
Cooking Quality ◽  
Expansion Ratio ◽  
Basmati Rice ◽  
Limited Information ◽  
Elongation Ratio ◽  
Milled Rice ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Head Rice ◽  
Characteristic Features

Rice is one of the most popular staple foods produced contributing higher most in agriculture gross domestic production in Nepal. Thus, nutritional, physicochemical, and cooking properties of rice might interplay important roles in their production and farming practice, therefore, it is inevitable to understand these characteristic features. However, there has been only limited information available on such properties, therefore we aimed to examine nutritional, physicochemical and cooking properties of four Basmati varieties of rice namely Red Basmati, White Basmati, Black Basmati and Pokhareli Basmati. These rice varieties were purchased from different places in Nepal in paddy form. In this study various parameters associated with milling, nutritional, physical and cooking properties were evaluated. To measure protein contents in rice, Kjeldal method was implied. Among the varieties, the protein content was maximum in Red Basmati (7.74%) and minimum in Black Basmati (6.51%). The milled rice percentage and head rice recovery were maximum in Pokhareli Basmati represented by 72.02±0.10 and 67.46±0.42, respectively, while and minimum in White Basmati represented by 68.17±0.50 and 65.11±0.28, respectively. The kernel elongation ratio and volume expansion ratio was maximum in Red Basmati represented by 1.62 and 2.85 respectively. Water uptake ratio was maximum 3.11 in Black Basmati and minimum of 2.18 in Red Basmati. Gruel loss was found lowest 1.05% in Red Basmati and highest represented by 2.40% in Black Basmati. The highest starch iodine blue value of 0.21 was observed in Red Basmati and lowest of 0.12 in Black Basmati. The Red Basmati was found to have the better cooking quality among all varieties.

Extrusion cooking properties of white and coloured rice varieties with different amylose content

2010 ◽  
Vol 63 (2) ◽  
pp. 55-63 ◽  
Author(s):  
Rutrada Sompong ◽  
Susanne Siebenhandl-Ehn ◽  
Emmerich Berghofer ◽  
Regine Schoenlechner
Keyword(s):  
Amylose Content ◽  
Extrusion Cooking ◽  
Rice Varieties ◽  
Cooking Properties

scholarly journals Variety difference of physicochemical and cooking properties of selected brown rice from Thailand and Malaysia

Food Research ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 630-635
Author(s):  
M.K. Chapagai ◽  
Wan Rosli W.I. ◽  
T. Karilla ◽  
S. Pinkaew
Keyword(s):  
Cooking Quality ◽  
Brown Rice ◽  
Textural Properties ◽  
Rice Flour ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Hydration Kinetics ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Solid Loss

Rice is a major staple food in Thailand and Malaysia. Although brown rice is a highly healthy substitute, preference is very low due to its texture and cooking quality. However, there are some brown rice varieties such as Sungyod (SY), Chiang (CH), Lepnok (LP) from Thailand and long grain specialty 1(LS1) and long grain specialty 2 (LS2) from Malaysian peninsula are commonly consumed in such areas. This study aimed to investigate the physicochemical and the cooking properties of these brown rice to understand the properties for better utilization. Therefore, Rapid visvo analyser (RVA), soaking characteristics, general cooking properties, textural properties and calorific values were measured and compared in 5 varieties of brown rice. Hydration kinetics indicated that LS1 and LS2 were faster in water absorption to reach plateau compared to the SY, LP, and CH. The cooking time of these brown rice was in the range from 29 to 35 min. The cooked brown rice had length/breadth (L/B) ratio (2.4 – 3.0), water uptake ratio (2.5 – 3.0), elongation ratio (1.1 –1.4) and gruel solid loss (3.2 – 5.2%). The hardness and the cohesiveness measured from texture analyzer were in the range of 6.75 – 15.5 N and 0.13 – 0.16. There was a significant variation in RVA pasting property of whole rice flour (p < 0.05). The variations of different properties of brown rice could be considered for the processing of brown rice and its application.

Exploring the physicochemical and cooking properties of some Indian aromatic and non-aromatic rice (Oryza sativa L.) cultivars

2020 ◽  
Vol 57 (2) ◽  
pp. 146-161
Author(s):  
Deepak Kumar Verma ◽  
Prem Prakash Srivastav
Keyword(s):  
Amylose Content ◽  
Oryza Sativa L ◽  
Basmati Rice ◽  
Aromatic Rice ◽  
Rice Cultivars ◽  
Elongation Ratio ◽  
Nutritional Values ◽  
Cooking Properties ◽  
Head Rice ◽  
Kernel Length

The objective of the present investigation was to assess the physicochemical and cooking properties of Indian rice cultivars grown locally by farmers. Results reported the highest hulling (80.82%) and milling (75.47%) in cultivar Badshah Bhog (BSB) while the head rice out-turns were maximum in Govind Bhog (GVB) (58.22%) and broken rice was minimum in Khushboo (KSB) (5.15%). The kernel length (6.16-7.88 mm) of KSB, Kalanamak (KLN), Sarbati (SRB) and Todal (TDL) cultivars were nearly alike to the preferred minimum acceptable standard of Basmati rice (6.6mm). The kernel and volume elongation ratio was highest in Swetganga (STG) (2.07) and TDL (4.07), respectively whereas the amylose content was highest (>20%) in all aromatic cultivars and categorized the intermediate type than evolved aromatic rice KLN and nonaromatic cultivars (SRB and TDL). Further, the studied rice cultivars had grain quality characteristics similar to the minimum acceptable standards for the breeding of basmati type cultivars which may be employed for breeding purposes and can be graded as export quality rice possessing distinct nutritional values at the global level.

scholarly journals Physico-chemical and cooking characteristics of some rice varieties

2004 ◽  
Vol 47 (1) ◽  
pp. 71-76 ◽  
Author(s):  
Rolando J. González ◽  
Alberto Livore ◽  
Brigitte Pons
Keyword(s):  
Mechanical Properties ◽  
Amylose Content ◽  
Regression Line ◽  
Testing Machine ◽  
Cooking Time ◽  
Gelatinization Temperature ◽  
Interesting Point ◽  
Rice Varieties ◽  
Physico Chemical ◽  
Good Linear Correlation

Some physicochemical and cooking characteristics corresponding to different varieties and commercial samples of rice were analysed. Some mechanical properties determined by both, the viscoelastograf and the Instrom Universal Food Testing Machine were also analysed. Gelatinization time (Gt), gelatinization endotherm and amylose content were determined. The results showed that there was a very good correlation between gelatinization temperature and Gt, while no noticeable correlation among others phsycochemical characteristics was observed. Regarding the mechanical properties, both methods permited to show significant differences among most of the samples. However, when the samples order obtained with hardness (Instrom) values was compared with that corresponding to firmness (Viscoelastograf) values, some discrepancies were observed. This could be attributable to the number of grains and the cooking time used in each method. There was good linear correlation between hardness and amylose content. On the contrary, none of the viscoelastograf parameters are correlated well with amylose. An interesting point was that the slope of the regression line obtained between firmness and cooking time could be utilised as a measure of cooking resistance of each sample and was related to the rate of water absorption.

scholarly journals Evaluation of physical, milling and cooking properties of four new rice (Oryza sativa L.) varieties in Nigeria

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Mayowa S. Sanusi ◽  
Rahman Akinoso ◽  
Nahemiah Danbaba
Keyword(s):  
Water Uptake ◽  
Cooking Time ◽  
Width Ratio ◽  
Equivalent Diameter ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Milled Rice ◽  
Cooked Rice ◽  
Cooking Properties ◽  
Breadth Ratio

This comparative study investigated some physical, milling and cooking properties of four new rice varieties (FARO 44, FARO 52, FARO 60 and FARO 61) in Nigeria. The varieties were processed into white rice and their properties analyzed separately using standard procedures. Results showed that paddy length, paddy-length-to-width-ratio, equivalent diameter, sphericity, grain volume, aspect ratio, thousand paddy grain weight, milled rice length, milled rice width, milled rice length to width ratio, milling recovery, head milled rice, broken milled rice, L*, a*, b*, elongation ratio, cooked-rice-length-to-breadth-ratio, water uptake ratio and cooking time were significantly different (p<0.05) for all the varieties. Milling recovery was found to vary from 65.3 to 68.33%; with FARO 60 having the highest head milled rice. It was observed that FARO 44 had the longest cooking time, elongation ratio and cooked rice length/breadth ratio while FARO 61 was found to have the highest water uptake ratio. There was significant positive correlation (r = 0.824) between percentage head milled rice and milling recovery while negative correlation existed between cooking time and L* (r= - 0.711). This information could be exploited by rice processors in the post-harvest processing of the varieties.

scholarly journals Analysis of cooking characteristics of important rice varieties marketed in Gujarat State

2020 ◽  
Author(s):  
Bhavesh L Jani ◽  
Bansee M Devani ◽  
Sanjay H Akbari ◽  
Dineshchandra C Joshi
Keyword(s):  
Water Uptake ◽  
Cooking Time ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Gujarat State ◽  
Rice Varieties ◽  
Parboiled Rice ◽  
Solid Loss ◽  
Length Width ◽  
Pasting Temperature

Abstract The study was carried out to analyze cooking characteristics of important rice varieties grown and processed in Gujarat state of India. In the study cooking characteristics which are of the most important viz. optimum cooking time, elongation ratio, water uptake ratio, gruel solid loss, pasting temperature and final viscosity were determined by standard methodologies and found to be 17 min, 1.523, 2.6, 4.32%, 91.7 °C and 2558 ± 165.6 cP for parboiled rice, 12 min, 1.356, 2.7, 8.25%, 87.9 °C and 3546 ± 142.3 cP for Jeerasar rice and 14 min, 1.318, 2.8, 10%, 93.9 °C and 1523 ± 179.6 cP for GJ-17 rice, respectively. Also, the size i.e. length, width and thickness of all the three varieties were measured and plotted to observe the trend of expansion after cooking. From the above observations, it was found that parboiled rice has comparatively better cooking characteristics but has higher cooking time, which consumers may not accept for household purpose.

Sign in / Sign up

Export Citation Format

Share Document