scholarly journals Shallow Gas Prospect Evaluation in Shahbazpur Structure Using Seismic Attributes Analysis - a Case Study for Bhola Island, Southern Bangladesh

2016 ◽  
Vol 64 (2) ◽  
pp. 135-140
Author(s):  
Morshedur Rahman ◽  
SM Mainul Kabir ◽  
Janifar Hakim Lupin
Keyword(s):  
High Amplitude ◽  
Seismic Attributes ◽  
Bright Spot ◽  
Deep Basin ◽  
Seismic Attribute ◽  
Spot Detection ◽  
Bright Spots ◽  
Amplitude Anomaly ◽  
Gas Fields ◽  
Migration Pathways

Shahbazpur structure is located in the southern Part of the central deep basin in the Hatia trough, where lie all the largest Gas fields of Bangladesh. A method is established to delineate the structural mapping precisely by interpreting four 2D seismic lines that are acquired over Shahbazpur structure. Moreover direct hydrocarbon indicators (DHI) related attributes are analyzed for further confirmation for presence of hydrocarbon. To do this synthetic seismogram generation, seismic to well tie, velocity modelling and depth conversion are performed. A limited number of seismic attributes functions that are available in an academic version of Petrel software are applied to analyze attributes. Seismic attribute analyses that are used in this interpretation mainly are associated to bright spot detection. Presence of bright spots or high amplitude anomaly over the present Shahbazpur structure, reservoir zone are observed. This signature will play a very important role in next well planning on the same structure to test the shallow accumulation of hydrocarbon. For better understanding of this shallow reserve, it is suggested to acquire 3D seismic data over Shahbazpur structure which will help to evaluate the hydrocarbon accumulation and to identify gas migration pathways. Dhaka Univ. J. Sci. 64(2): 135-140, 2016 (July)

GOLDEN BEACH: A BRIGHT SPOT

1978 ◽  
Vol 18 (1) ◽  
pp. 109
Author(s):  
R. B. Mariow
Keyword(s):  
Seismic Data ◽  
High Amplitude ◽  
Late Eocene ◽  
Polarity Reversal ◽  
Bright Spot ◽  
Areal Extent ◽  
Water Contact ◽  
Bright Spots ◽  
Gippsland Basin ◽  
Seismic Reflector

The Golden Beach closed anticlinal structure lies five kilometres offshore in the Gippsland Basin. Golden Beach 1A was drilled in 1967 near the crest of the structure and intersected a gas column of 19 m (63 feet) at the top of the Latrobe Group (Late Eocene) where most of the hydrocarbon accumulations in the Gippsland Basin have been found. The gas-water contact lies at a depth of 652 m (2139 feet) below sea level.On seismic data recorded over the structure, a high amplitude flat-lying event was interpreted as a bright 'flat spot' at the gas-water contact. Reprocessing of the seismic data enhanced the bright spot effect and enabled the areal extent of the gas zone to be mapped. The presence of the gas also leads to a polarity reversal of the top of the Latrobe Group seismic reflector over the gas accumulation.Seismic data from other structures containing hydrocarbons in the Gippsland Basin support the concept that bright spots and flat spots are more likely to be associated with gas than with oil accumulations, and that the observed bright spot effect decreases with increasing depth.

Geological origins of seismic bright spot reflections in the Ordovician strata in the Halahatang area of the Tarim Basin, western China

2018 ◽  
Vol 55 (12) ◽  
pp. 1297-1311 ◽  
Author(s):  
Wei Yang ◽  
Xiaoxing Gong ◽  
Wenjie Li
Keyword(s):  
Tarim Basin ◽  
Oil And Gas ◽  
High Amplitude ◽  
Hydrothermal Activity ◽  
Hydrocarbon Exploration ◽  
Western China ◽  
Bright Spot ◽  
Gas Reservoirs ◽  
Seismic Section ◽  
Bright Spots

Anomalously high-amplitude seismic reflections are commonly observed in deeply buried Ordovician carbonate strata in the Halahatang area of the northern Tarim Basin. These bright spots have been demonstrated to be generally related to effective oil and gas reservoirs. These bright spot reflections have complex geological origins, because they are deeply buried and have been altered by multi-phase tectonic movement and karstification. Currently, there is no effective geological model for these bright spots to guide hydrocarbon exploration and development. Using core, well logs, and seismic data, the geological origins of bright spot are classified into three types, controlled by karstification, faulting, and volcanic hydrothermal activity. Bright spots differing by geological origin exhibit large differences in seismic reflection character, such as reflection amplitude, curvature, degree of distortion, and the number of vertically stacked bright spots in the seismic section. By categorizing the bright spots and the seismic character of the surrounding strata, their geological origins can after be inferred. Reservoirs formed by early karstification were later altered by epigenetic karstification. Two periods of paleodrainage further altered the early dissolution pores. In addition, faults formed by tectonic uplift also enhanced the dissolution of the flowing karst waters. Some reservoirs were subsequently altered by Permian volcanic hydrothermal fluids.

Are bright spots always hydrocarbons? A case study in the Taranaki Basin, New Zealand

2020 ◽  
Vol 8 (4) ◽  
pp. SR45-SR51
Author(s):  
Peter Reilly ◽  
Roberto Clairmont ◽  
Heather Bedle
Keyword(s):  
New Zealand ◽  
High Amplitude ◽  
Seismic Survey ◽  
Bright Spot ◽  
Temporal Region ◽  
Cross Sectional ◽  
Seismic Amplitude ◽  
Bright Spots ◽  
Seismic Amplitudes ◽  
Seismic Anomalies

In the shallower regions of the 3D Nimitz seismic survey, there exist multiple interesting bright seismic amplitude anomalies. These anomalies, or funny looking things, occur in a confined spatial and temporal region of the seismic. They have a concave-up seismic appearance along the cross section. Bright seismic amplitudes can be a direct hydrocarbon indicator, or they can be representative of strong lithologic contrasts and/or acquisition artifacts. We have set out to investigate misinterpreted seismic anomalies along cross-sectional lines. Therefore, we apply seismic attributes to indicate that these bright spot features, which we interpret to be submarine gullies looking along time-slice intersections, can possibly be mistaken for hydrocarbon anomalies in a cross-sectional view. However, we cannot fully rule out the presence of hydrocarbons because it is common for gas sands to create similar anomalies. Previously drilled wells within the survey (Korimako-1 and Tarapunga-1) point to a lack of hydrocarbon potential in the subsurface. Although it is possible that these bright spots are due to hydrocarbon presence, we develop a more likely hypothesis: The lithology of the interfluve sediments is similar to the gully-margin drapes but differs from the gully sediment fill. Funny looking thing (FLT): Submarine gullies Seismic appearance: High-amplitude spotted features Alternative interpretations: Lithologic anomalies, gas seeps, bright spots Features with a similar appearance: Gas accumulation, sediment fills in limestone paleocaves Formation: Giant Foresets Formation Age: Pleistocene Location: Taranaki Basin, New Zealand Seismic data: Nimitz 3D (cropped volume) Analysis tools: Curvature, instantaneous frequency, and sweetness attributes; well reports

scholarly journals Pitfalls and limitations in seismic attribute interpretation of tectonic features

2015 ◽  
Vol 3 (1) ◽  
pp. SB5-SB15 ◽  
Author(s):  
Kurt J. Marfurt ◽  
Tiago M. Alves
Keyword(s):  
Seismic Data ◽  
Seismic Attributes ◽  
Seismic Attribute ◽  
3D Data ◽  
Amplitude Data ◽  
Seismic Sections ◽  
Push Down ◽  
Data Coherence ◽  
Level Of Experience ◽  
Tectonic Features

Seismic attributes are routinely used to accelerate and quantify the interpretation of tectonic features in 3D seismic data. Coherence (or variance) cubes delineate the edges of megablocks and faulted strata, curvature delineates folds and flexures, while spectral components delineate lateral changes in thickness and lithology. Seismic attributes are at their best in extracting subtle and easy to overlook features on high-quality seismic data. However, seismic attributes can also exacerbate otherwise subtle effects such as acquisition footprint and velocity pull-up/push-down, as well as small processing and velocity errors in seismic imaging. As a result, the chance that an interpreter will suffer a pitfall is inversely proportional to his or her experience. Interpreters with a history of making conventional maps from vertical seismic sections will have previously encountered problems associated with acquisition, processing, and imaging. Because they know that attributes are a direct measure of the seismic amplitude data, they are not surprised that such attributes “accurately” represent these familiar errors. Less experienced interpreters may encounter these errors for the first time. Regardless of their level of experience, all interpreters are faced with increasingly larger seismic data volumes in which seismic attributes become valuable tools that aid in mapping and communicating geologic features of interest to their colleagues. In terms of attributes, structural pitfalls fall into two general categories: false structures due to seismic noise and processing errors including velocity pull-up/push-down due to lateral variations in the overburden and errors made in attribute computation by not accounting for structural dip. We evaluate these errors using 3D data volumes and find areas where present-day attributes do not provide the images we want.

Seismic attribute for characterization and prediction of carbonate faulted karst reservoirs in Tarim Basin, China

2021 ◽  
pp. 1-36
Author(s):  
Zhiwei Xiao ◽  
Li Wang ◽  
Ruizhao Yang ◽  
Dewei Li ◽  
Lingbin Meng
Keyword(s):  
Tarim Basin ◽  
Oil And Gas ◽  
Prediction Method ◽  
Strike Slip ◽  
Fault System ◽  
Bright Spot ◽  
Upper Ordovician ◽  
Reservoir Prediction ◽  
Seismic Attribute ◽  
Gas Field

An ultradeep, faulted karst reservoir of Ordovician carbonate was discovered in the Shunbei area of the Tarim Basin. Fractured-cavity reservoirs buried beneath the large thickness of upper Ordovician mudstone were formed along the fault-karst belts. The hydrocarbon accumulation in these reservoirs is controlled by the fault system, and the oil-gas accumulation was affected by karstification and hydrothermal reformation. Previous studies and 2D modeling revealed that the reservoirs had “bright spot” amplitude responses like “string beads,” and they have developed along the strike-slip faults. However, describing such a complex fault-controlled karst system is still a difficult problem that has not been well addressed. We have sought to instruct the attribute expression of faulted karst reservoirs in the northern part of the Tarim Basin. We applied coherence and fault likelihood (FL) seismic attributes to image faults and fractures zones. We then used a trend analysis method to calculate the residual impedance from the impedance of the acoustic inversion, using the fact that residual impedance has higher lateral resolution in reservoir predictions. Finally, we integrated the coherence, FL, and residual impedance attributes into a new seismic attribute, the “fault-vuggy body,” with a certain fusion coefficient. The fault-vuggy body attribute establishes a connection between faults and karst cavities. This method could help in the characterization and prediction of carbonate faulted karst reservoirs. Available drilling data were used to validate that the fused fault-vuggy body attribute was an effective reservoir prediction method. As the seismic sections and slices along the layer help delineate, the distribution of bright spots and strike-slip faults indicates that the main strike-slip fault zones are the most favorable reservoirs in the Shunbei Oil and Gas Field.

scholarly journals Characterization of reservoir sands using 3D seismic attributes in the coastal swamp area of Niger Delta Basin

2021 ◽  
Author(s):  
Oluwatoyin Khadijat Olaleye ◽  
Pius Adekunle Enikanselu ◽  
Michael Ayuk Ayuk
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Seismic Attributes ◽  
Effective Porosity ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Niger Delta Basin

AbstractHydrocarbon accumulation and production within the Niger Delta Basin are controlled by varieties of geologic features guided by the depositional environment and tectonic history across the basin. In this study, multiple seismic attribute transforms were applied to three-dimensional (3D) seismic data obtained from “Reigh” Field, Onshore Niger Delta to delineate and characterize geologic features capable of harboring hydrocarbon and identifying hydrocarbon productivity areas within the field. Two (2) sand units were delineated from borehole log data and their corresponding horizons were mapped on seismic data, using appropriate check-shot data of the boreholes. Petrophysical summary of the sand units revealed that the area is characterized by high sand/shale ratio, effective porosity ranged from 16 to 36% and hydrocarbon saturation between 72 and 92%. By extracting attribute maps of coherence, instantaneous frequency, instantaneous amplitude and RMS amplitude, characterization of the sand units in terms of reservoir geomorphological features, facies distribution and hydrocarbon potential was achieved. Seismic attribute results revealed (1) characteristic patterns of varying frequency and amplitude areas, (2) major control of hydrocarbon accumulation being structural, in terms of fault, (3) prospective stratigraphic pinch-out, lenticular thick hydrocarbon sand, mounded sand deposit and barrier bar deposit. Seismic Attributes analysis together with seismic structural interpretation revealed prospective structurally high zones with high sand percentage, moderate thickness and high porosity anomaly at the center of the field. The integration of different seismic attribute transforms and results from the study has improved our understanding of mapped sand units and enhanced the delineation of drillable locations which are not recognized on conventional seismic interpretations.

scholarly journals APPLICATION OF DIRECT HYDROCARBON INDICATORS FOR OIL AND GAS PROSPECTING IN THE DNIPRO-DONETS DEPRESSION

2021 ◽  
pp. 99-108
Author(s):  
Sergiy VYZHVA ◽  
Ihor SOLOVYOV ◽  
Ihor МYKHALEVYCH ◽  
Viktoriia KRUHLYK ◽  
Georgiy LISNY
Keyword(s):  
Acoustic Impedance ◽  
Oil And Gas ◽  
Practical Importance ◽  
Seismic Attributes ◽  
Limited Range ◽  
Seismic Attribute ◽  
Tectonic Model ◽  
Hydrocarbon Traps ◽  
Attribute Analysis ◽  
Volumetric Images

Based on the results of numerous seismic studies carried out in the areas and fields of the Dnipro-Donets depression, the strategy to identify hydrocarbon traps in this region has been developed taking into account modern requirements for prospecting and exploration of gas and oil fields. The studies are designed to determine the favorable zones of hydrocarbon accumulations based on the analysis of the structural-tectonic model. A necessary element for solving such a problem is to aaply direct indicators of hydrocarbons to predict traps of the structural, lithological or combined type. It was determined that an effective approach to identify hydrocarbon traps in the region is attribute analysis employing seismic attributes such as seismic envelope, acoustic impedance or relative acoustic impedance. In most cases of practical importance, the analysis of the distribution of the values of these attributes turned out to be sufficient for performing the geological tasks. It is given an example of extracting additional useful information on the spatial distribution of hydrocarbon traps from volumetric images obtained from seismograms of common sources with a limited range of ray angles inclinations. To analyze the distributions of seismic attribute values, it is recommended to use the Geobody technology for detecting geological bodies as the most effective when using volumetric seismic data. The distributions of various properties of rocks, including zones of increased porosity or zones of presence of hydrocarbons are determined depending on the types of seismic attributes used in the analysis,. The use of several seismic attributes makes it possible to identify geological bodies saturated with hydrocarbons with increased porosity and the like. The paper provides examples of hydrocarbon traps recognition in the areas and fields of the Dnipro-Donets depression practically proved by wells. A generalization on the distribution of promising hydrocarbon areas on the Northern flank of the Dnipro-Donets depression and the relationship of this distribution with the identified structural elements of the geological subsoil is made. 

REDUCING RESOURCE UNCERTAINTY USING SEISMIC AMPLITUDE ANALYSIS ON THE SOUTHERN RANKIN TREND, NORTHWEST AUSTRALIA

1999 ◽  
Vol 39 (1) ◽  
pp. 128 ◽  
Author(s):  
D. Sibley ◽  
F. Herkenhoff ◽  
D. Criddle ◽  
M. McLerie
Keyword(s):  
Seismic Attributes ◽  
3D Seismic ◽  
Amplitude Analysis ◽  
Seismic Amplitude ◽  
Amplitude Versus Offset ◽  
Minimum Number ◽  
Gas Fields ◽  
Resource Uncertainty

Between 1973 and 1996 West Australian Petroleum Pty Limited (WAPET) discovered five major gas fields on the southern Rankin Trend including Spar, West Tryal Rocks, Gorgon, Chrysaor, and Dionysus (collectively termed the Greater Gorgon Resource). Recent discoveries at Chrysaor and Dionysus emphasise the role of subtle 3D seismic attributes in finding hydrocarbons and defining reserves with a minimum number of wells.The Gorgon, Chrysaor, and Dionysus fields were covered by 3D seismic data shot in 1991 and 1995, which led WAPET to discover Chrysaor and later Dionysus. Subsequent to the 3D acquisitions, field reservoirs have been correlated with anomalous seismic events (seismic amplitude and amplitude versus offset) that conform to depth structure. Follow-up work has shown that combining these 3D seismic attributes improves the prediction of wet sands, gas sands, and other lithologies.The resulting understanding and confidence provided by this 3D seismic has driven an aggressive exploration program and defined field reserves at a high confidence level. Results include the recent award of permit area WA-267-P to WAPET and the ongoing studies to begin development of the Greater Gorgon Resource.

scholarly journals Application of 3D Seismic Attribute Analyses for Hydrocarbon Prospectivity in Uzot-Field, Onshore Niger Delta Basin, Nigeria

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
U. C. Omoja ◽  
T. N. Obiekezie
Keyword(s):  
Niger Delta ◽  
Hanging Wall ◽  
Average Energy ◽  
Maximum Amplitude ◽  
Seismic Attributes ◽  
Bright Spot ◽  
Maximum Magnitude ◽  
3D Seismic ◽  
Amplitude Maximum ◽  
Niger Delta Basin

3D seismic interpretative study was carried out across the Uzot-field in the western Coastal Swamp Depobelt of the onshore Niger Delta Basin, Nigeria, with the aim to identify possible hydrocarbon leads and prospects away from the drilled zone, utilizing seismic amplitude attributes. The method employed in this study involved systematic picking of faults and mapping of horizons/reservoir tops across seismic volume and extraction of seismic attributes. Structural analysis indicates the presence of down-to-basin footwall and hanging wall faults associated with rollover anticlines and horst-block (back-to-back fault). Generated time and depth structural maps from three reservoir intervals (D3100, D5000, and D9000) revealed the presence of fault dependent closure across the field. Analyses of relevant seismic attributes such as root-mean-square (RMS) amplitude, maximum amplitude, average energy amplitude, average magnitude amplitude, maximum magnitude attribute, and standard deviation amplitude, which were applied on reservoir tops, revealed sections with bright spot anomalies. These amplitude anomalies served as direct hydrocarbon indicators (DHIs), unravelling the presence and possible hydrocarbon prospective zones. In addition, structural top maps show that booming amplitude is seen within the vicinity of fault closures, an indication that these hydrocarbon prospects are structurally controlled. Results from this study have shown that, away from currently producing zone at the central part of the field, additional leads and prospects exist, which could be further evaluated for hydrocarbon production.

scholarly journals Extensive Sills in the Continental Basement from Deep Seismic Reflection Profiling

Geosciences ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 449
Author(s):  
Larry D. Brown ◽  
Doyeon Kim
Keyword(s):  
Seismic Reflection ◽  
Country Rock ◽  
High Amplitude ◽  
Tectonic Activity ◽  
Seismic Profiles ◽  
Mafic Intrusions ◽  
Bright Spots ◽  
Crystalline Crust ◽  
Seismic Reflection Profiling ◽  
Fluid Magma

Crustal seismic reflection profiling has revealed the presence of extensive, coherent reflections with anomalously high amplitudes in the crystalline crust at a number of locations around the world. In areas of active tectonic activity, these seismic “bright spots” have often been interpreted as fluid magma at depth. The focus in this report is high-amplitude reflections that have been identified or inferred to mark interfaces between solid mafic intrusions and felsic to intermediate country rock. These “frozen sills” most commonly appear as thin, subhorizontal sheets at middle to upper crustal depths, several of which can be traced for tens to hundreds of kilometers. Their frequency among seismic profiles suggest that they may be more common than widely realized. These intrusions constrain crustal rheology at the time of their emplacement, represent a significant mode of transfer of mantle material and heat into the crust, and some may constitute fingerprints of distant mantle plumes. These sills may have played important roles in overlying basin evolution and ore deposition.

Sign in / Sign up

Export Citation Format

Share Document