scholarly journals Synthesis and Characterization of NiMo Catalysts Supported on Fine Carbon Particles for Hydrotreating: Effects of Metal Loadings in Catalyst Formulation

2022 ◽  
Vol 3 ◽  
Author(s):  
Emma Aryee ◽  
Ajay Kumar Dalai ◽  
John Adjaye
Keyword(s):  
Bimetallic Catalyst ◽  
Arc Discharge ◽  
Synthesis Method ◽  
Supported Catalyst ◽  
Incipient Wetness Impregnation ◽  
Carbon Nanohorns ◽  
Carbon Particles ◽  
Nimo Catalysts ◽  
Fine Carbon

The by-products collected during the synthesis of carbon nanohorns via the arc discharge synthesis method is comprised of other carbon particles (OCP). At a hydrotreating operating temperature of 370°C, preliminary investigations using a bimetallic catalyst with support originating from the fine fractions of other carbon particles (OCPf) and containing 13 wt% Mo and 2.5 wt% Ni resulted in an HDS and HDN conversion of 78 and 25%, respectively. Variation of metal compositions in catalyst formulation and its impact on hydrotreating activity was therefore considered in this study to enhance the hydrotreating activity of OCPf–supported catalyst, and to determine if the best NiMo/OCPf catalyst achieved from this study could be a viable catalyst for hydrotreating applications. The co-incipient wetness impregnation was used in preparing series of hydrotreating catalysts with Ni and Mo loadings within the range of (2.5–5.0 wt%) and (13–26 wt%) respectively. Overall, the catalyst samples with maximum Ni loading of 5.0 wt% and Mo loadings of either 13 or 19 wt% showed higher dispersion and the ability to form a Type II Ni-Mo-S phase with enhanced activity. The effects of metal compositions on both HDS and HDN activities were correlated with their physicochemical properties.

Preparation and characterization of thin films of carbon nitride

1995 ◽  
Vol 53 ◽  
pp. 104-105
Author(s):  
L. Wan ◽  
R. F. Egerton
Keyword(s):  
Carbon Nitride ◽  
Arc Discharge ◽  
Ion Beam ◽  
Chemical Vapor ◽  
Reactive Sputtering ◽  
Vacuum Arc ◽  
Specimen Preparation ◽  
Bonding Structure ◽  
Electron Energy Loss

INTRODUCTION Recently, a new compound carbon nitride (CNx) has captured the attention of materials scientists, resulting from the prediction of a metastable crystal structure β-C3N4. Calculations showed that the mechanical properties of β-C3N4 are close to those of diamond. Various methods, including high pressure synthesis, ion beam deposition, chemical vapor deposition, plasma enhanced evaporation, and reactive sputtering, have been used in an attempt to make this compound. In this paper, we present the results of electron energy loss spectroscopy (EELS) analysis of composition and bonding structure of CNX films deposited by two different methods.SPECIMEN PREPARATION Specimens were prepared by arc-discharge evaporation and reactive sputtering. The apparatus for evaporation is similar to the traditional setup of vacuum arc-discharge evaporation, but working in a 0.05 torr ambient of nitrogen or ammonia. A bias was applied between the carbon source and the substrate in order to generate more ions and electrons and change their energy. During deposition, this bias causes a secondary discharge between the source and the substrate.

Comparative Characterization of Different Samples Containing Nano-ZnO Particles with Applicability in Topical Therapies

2019 ◽  
Vol 56 (3) ◽  
pp. 652-656
Author(s):  
Raul Chioibas ◽  
Florin Borcan ◽  
Ovidiu Mederle ◽  
Dana Stoian ◽  
Codruta Marinela Soica
Keyword(s):  
Synthesis Method ◽  
Pharmaceutical Preparations ◽  
Ultrasound Treatment ◽  
Heating Process ◽  
White Pigment ◽  
Nano Zno ◽  
Zno Particles ◽  
Repeated Freezing ◽  
Skin Healing

Zinc oxide (ZnO) is an inorganic compound used for its antiseptic and skin healing properties. It is an excellent protective filter against UV radiation and it can be used as white pigment in pharmaceutical preparations. In this study, nano-ZnO particles were obtained by ultrasound treatment, and respectively by repeated freezing/heating process. The influence of synthesis method and of ultrasound generator parameters on the particles size and stability was observed. The results reveal that were obtained samples with a very good stability and sizes between 15 and 96 nm. It was found that synthesis based on ultrasound treatment lead to the formation of nanoparticles with lower sizes.

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Synthesis and Characterization of ZIF-8 Mixed Matrix Membranes

2014 ◽  
Vol 625 ◽  
pp. 661-664
Author(s):  
Chen Chuang Lok ◽  
Yin Fong Yeong
Keyword(s):  
Room Temperature ◽  
Synthesis Method ◽  
Mixed Matrix Membranes ◽  
Inorganic Filler ◽  
X Ray Diffraction ◽  
Mixed Matrix ◽  
Temperature Synthesis ◽  
X Ray ◽  
Matrix Membranes

In the present work, ZIF-8/6FDA-durene mixed matrix membranes (MMMs) were synthesized and characterized. ZIF-8 nanocrystals, which were used as the inorganic filler, were synthesized using rapid room-temperature synthesis method whereas 6FDA-durene polyimide was synthesized by polycondensation method followed by chemical imidization. Pure and 6FDA-durene membranes loaded with 5 wt%, 10 wt% and 15 wt% of ZIF-8 were fabricated. The structural properties and morphology of the resultant membranes were characterized by using X-ray Diffraction (XRD) and Field emission scanning electron microscope (FESEM) . The EDX images showed that ZIF-8 particles agglomerated in the polymer matrix. However, no phase separation was observed for all resultant MMMs.

Synthesis and Characterization of Alkeyl Imidazolium Ionic Liquids

2014 ◽  
Vol 1048 ◽  
pp. 452-455
Author(s):  
Qiang Wang ◽  
Shi Dong Wang ◽  
Ming Chen Qi ◽  
Shu Liang Zang
Keyword(s):  
Ionic Liquids ◽  
Chemical Structure ◽  
Direct Synthesis ◽  
Synthesis Method ◽  
Structure And Properties ◽  
Spectra Analysis ◽  
Infrared Spectrometer ◽  
Liquid Salts ◽  
Structure Of Matter

Two new imidazole ionic liquid salts, 1-allyl-3-methylimidazolium chloride ([AMIM]Cl) and 1-allyl-3-methy-imidazolium hydrogen sulfate ([EMIM]HSO4), were synthesized with direct synthesis and two-step synthesis method, using a viscosity meter, PH meter, conductivity meter, densitometer, infrared spectrometer determined its chemical structure and properties. The results show that two ionic liquids in the range is slightly different, the trend is roughly same. As the temperature increases, the viscosity decreases, PH gradually increased, the density decreases slightly, can be regarded as constant, the conductivity gradually increased. Ionic liquids of the two IR spectra analysis show its structure and synthetic route consistent with the structure of matter.

Characterization of single-walled carbon nanohorns using neon adsorption isotherms

Carbon ◽  
2009 ◽  
Vol 47 (3) ◽  
pp. 769-774 ◽  
Author(s):  
Vaiva Krungleviciute ◽  
Aldo D. Migone ◽  
Michael Pepka
Keyword(s):  
Adsorption Isotherms ◽  
Carbon Nanohorns ◽  
Single Walled Carbon

scholarly journals GREEN SYNTHESIS AND SPECTROSCOPIC CHARACTERIZATION OF IRON (III) COMPLEX OF UREA FROM HUMAN URINE AND IRON RUST

2020 ◽  
Vol 45 (5) ◽  
Author(s):  
V.O. Uduah ◽  
J.J. Gongden ◽  
M.L. Kagoro ◽  
K.K. Gurumyen ◽  
Y.N. Lohdip ◽  
...  
Keyword(s):  
Human Urine ◽  
Synthesis Method ◽  
Reaction Medium ◽  
Spectroscopic Characterization ◽  
Waste Materials ◽  
Spectroscopic Techniques ◽  
Distilled Water ◽  
Oxide Composition ◽  
Ft Ir

This work presents a dry synthesis of Iron (III) complex with urea isolated from human urine and Fe (III) obtained from iron rust particles. Iron (III), PI (Purified iron rust), was isolated from iron rust in 10% hydrochloric acid, HCl and distilled water respectively. The complex was synthesized via dry-synthesis method using the melted urea as reaction medium. The isolated Fe (III) was characterized by elemental analysis which was done using XRF Cu-Zn method. The complex was prepared in a 1:4 metal to ligand (M-L) ratio. The stoichiometry of reaction indicate a 1:3 ratio of M-L (Fe-U). The complex was characterized by FT-IR, UV-vis, XRF and XRD spectroscopic techniques. The Fe (III) isolate and Fe-U complex shows percentage yields of 35.7% and ~92% respectively. The elemental and oxide composition of Fe and Fe2O3 (i.e., PI) were 40.387% and 57.753% respectively. The results obtained from the characterization of the iron-urea complex, IUC, indicate FT-IR result as symmetric and asymmetric frequencies with peaks of a combination band of Vs (NH) and Vas (NH), C=O and V (C-N) all stretched, XRD showed the crystal to be amorphous. The elemental and oxide composition of the Fe and Fe2O3 in IUC were 40.007 and 44.201 respectively. The results obtained revealed that useful complexes can be synthesized easily from waste materials, such as urine and iron rust particles, which complement Green chemistry.

Sign in / Sign up

Export Citation Format

Share Document