scholarly journals Elevated Carbon Dioxide and Nitrogen Impact Wheat and Its Aphid Pest

2020 ◽  
Vol 11 ◽  
Author(s):  
Eva Carreras Navarro ◽  
Shu Kee Lam ◽  
Piotr Trębicki

The rise in atmospheric carbon dioxide (CO2) generally increases wheat biomass and grain yield but decreases its nutritional value. This, in turn, can alter the metabolic rates, development, and performance of insect pests feeding on the crop. However, it is unclear how elevated CO2 (eCO2) and nitrogen (N) input affect insect pest biology through changes in wheat growth and tissue N content. We investigated the effect of three different N application rates (low, medium, and high) and two CO2 levels (ambient and elevated) on wheat growth and quality and the development and performance of the bird cherry-oat aphid, a major cereal pest worldwide, under controlled environmental conditions. We found that eCO2 significantly decreased total aphid fecundity and wheat N content by 22 and 39%, respectively, when compared to ambient CO2 (aCO2). Greater N application significantly increased total aphid fecundity and plant N content but did not offset the effects of eCO2. Our findings provide important information on aphid threats under future CO2 conditions, as the heavy infestation of the bird cherry-oat aphid is detrimental to wheat grain yield and quality.

2009 ◽  
Vol 60 (8) ◽  
pp. 697 ◽  
Author(s):  
Mahabubur Mollah ◽  
Rob Norton ◽  
Jeff Huzzey

The AGFACE project commenced in June 2007 at Horsham (36°45′07″S, 142°06′52″E; 127 m elevation), Victoria, Australia. Its aim is to quantify the interactive effects of elevated atmospheric carbon dioxide concentration (e[CO2]), nitrogen, temperature (accomplished by early and late sowing times), and soil moisture on the growth, yield, and water use of wheat (Triticum aestivum L.) under Australian conditions. The main engineering goal of the project was to maintain an even temporal and spatial distribution of carbon dioxide (CO2) at 550 μmol/mol within AGFACE rings containing the experimental treatments. Monitoring showed that e[CO2] at the ring-centres was maintained at or above 90% of the target (495 μmol/mol) between 93 and 98% of the operating time across the 8 rings and within ±10% of the target (495–605 μmol/mol) between 86 and 94% of the time. The carbon dioxide concentration ([CO2]) measured inside the rings declined non-linearly with increasing distance downwind of the CO2 source and differed by 3–13% in concentration between the two canopy heights in each ring, but was not affected by wind speed or small variations in [CO2] at the ring-centres. The median values for model-predicted concentrations within the inner 11-m-diameter portion of the rings (>80% of the ring area) varied between 524 and 871 μmol/mol but remained close to target near the centres. The design criteria adopted from existing pure CO2 fumigating FACE systems and new ideas incorporated in the AGFACE system provided a performance similar to its equivalent systems. This provides confidence in the results that will be generated from experiments using the AGFACE system.


1971 ◽  
Vol 22 (1) ◽  
pp. 39 ◽  
Author(s):  
KS Fischer ◽  
GL Wilson

The relative contributions of different photosynthetic sites to the filling of the grain in grain sorghum (Sorghum vulgare cv. Brolga) were estimated by measuring the 14C in the grain after exposing various leaves and the head to radioactive carbon dioxide. Methods for preventing photosynthesis were also used. Of the grain yield, 93% was due to assimilation by the head and upper four leaves. The head contribution of 18 % was due equally to direct assimilation of atmospheric carbon dioxide and to reassimilation of carbon dioxide released within the grain by respiration of material translocated from the leaves. The remaining 75 % was equally assimilated by the upper four leaves, the flag leaf being the most efficient contributor per unit area and the third uppermost leaf the least efficient. The percentage contributions to the grain by the flag leaf and fourth leaf, estimated from the decrease in grain yield when they were shaded, agreed closely with the estimates obtained by using 14CO2.


Author(s):  
A. A. Oso ◽  
A. J. Okunoye

Okra, an economically important vegetable crop with numerous benefits to human, is often attacked by large number of insect species. These insect species cause direct damage to okra plants and also serve as vectors of diseases resulting in economic loss. Control of these insect pests given reducing hunger and poverty, and fostering agricultural ecosystems becomes imperative.  This study aimed at the use of indigenous medicinal plant and a sub-lethal dose of synthetic insecticide to check the invasion of pests and performance of okra. The field laid in a randomized complete block design of four treatments replicated three times. The treatments included; Curcuma longa 5%, Curcuma longa 20%, lambda-cyhalothrin, and a control. Data were collected on insect pest species recovered after treatment application and yield of okra. All data were subjected to analysis of variance and differences between the treatment means were separated using Duncan’s multiple range test. C. longa (20%) compared effectively with the sub-lethal dose of lambdacyhalothin (0.5 ml/l) in their attack against the targeted pests. Although higher number and weight of pods were harvested from synthetically treated plots, the C. longa treated plots produced significantly higher number and weight of harvested pods when compared with untreated plots. Water extract of the rhizomes also conferred some protection against okra pests; we recommend that farmers in Ekiti State adopt this botanical against the notorious flea beetles especially when the profits accrue from okra sales outweigh their net investment.  


1975 ◽  
Vol 55 (2) ◽  
pp. 359-362
Author(s):  
J. A. MACLEOD ◽  
L. B. MACLEOD

The effects of spring N fertilization on yield and N content of grain were studied over a 3-yr period on four cultivars of winter wheat (Triticum aestivum L.) with three rates of fall-applied fertilizer. No increases in grain yield, grain N concentration or grain N yield were observed when fall-applied N was increased from 22 to 44 kg/ha, or when fall-applied K was increased from 37 to 74 kg/ha. Increasing the rate of spring-applied N from 0 to 33 kg/ha increased grain yields by 0.84 metric ton/ha with no increase in grain N concentration. Increasing the rate of N application from 33 to 67 kg/ha increased grain yield by 0.59 metric ton/ha. This was accompanied by a 0.14% increase in grain N concentration. Increasing the rate of N application from 67 to 100 kg/ha increased grain yields by only 0.14 metric ton/ha. This was accompanied by an increase of 0.21% in grain N concentration. The increase in grain N yield was similar with each increment of N application and averaged 0.40 kg N in grain per kg fertilizer N applied in the spring. Larger increases in yield and smaller increases in grain N concentration were generally obtained with the high yielding, low N cv. Yorkstar than with the low yielding, high N cv. Richmond. The effects of N on Genesee and Talbot were intermediate.


ENTOMON ◽  
2018 ◽  
Vol 43 (4) ◽  
pp. 257-262
Author(s):  
Atanu Seni ◽  
Bhimasen Naik

Experiments were carried out to assess some insecticide modules against major insect pests of rice. Each module consists of a basal application of carbofuran 3G @ 1 kg a.i ha-1 at 20 DAT and Rynaxypyr 20 SC @ 30 g a.i ha-1 at 45 DAT except untreated control. All modules differ with each other only in third treatment which was applied in 65 DAT. The third treatment includes: Imidacloprid 17.8 SL @ 27 g a.i ha-1, Pymetrozine 50 WG @ 150 g a.i ha-1, Triflumezopyrim 106 SC @ 27 g a.i ha-1, Buprofezin 25 SC @ 250 g a.i ha-1; Glamore (Imidacloprid 40+Ethiprole 40% w/w) 80 WG @ 100 g a.i. ha-1, Thiacloprid 24 SC @ 60 g a.i ha-1, Azadirachtin 0.03 EC @ 8 g a.i ha-1, Dinotefuran 20 SG@ 40 g a.i ha-1 and untreated control. All the treated plots recorded significantly lower percent of dead heart, white ear- head caused by stem borer and silver shoot caused by gall midge. Module with Pymetrozine 50 WG @ 150 g a.i ha-1 treated plot recorded significantly higher per cent reduction of plant hoppers (>80% over untreated control) and produced higher grain yield (50.75 qha-1) than the other modules. Among the different treated modules the maximum number of spiders was found in Azadirachtin 0.03 EC @ 8 g a.i ha-1 treated module plot followed by other treatments.


2020 ◽  
Vol 31 (1) ◽  
pp. 24-35 ◽  
Author(s):  
Somiahnadar Rajendran

Insects are a common problem in stored produce. The author describes the extent of the problem and approaches to countering it. Stored products of agricultural and animal origin, whether edible or non-edible, are favourite food for insect pests. Durable agricultural produce comprising dry raw and processed commodities and perishables (fresh produce) are vulnerable to insect pests at various stages from production till end-use. Similarly, different animal products and museum objects are infested mainly by dermestids. Insect pests proliferate due to favourable storage conditions, temperature and humidity and availability of food in abundance. In addition to their presence in food commodities, insects occur in storages (warehouses, silos) and processing facilities (flour mills, feed mills). Insect infestation is also a serious issue in processed products and packed commodities. The extent of loss in stored products due to insects varies between countries depending on favourable climatic conditions, and pest control measures adopted. In stored food commodities, insect infestation causes loss in quantity, changes in nutritional quality, altered chemical composition, off-odours, changes in end-use products, dissemination of toxigenic microorganisms and associated health implications. The insects contribute to contaminants such as silk threads, body fragments, hastisetae, excreta and chemical secretions. Insect activity in stored products increases the moisture content favouring the growth of moulds that produce mycotoxins (e.g., aflatoxin in stored peanuts). Hide beetle, Dermestes maculatus infesting silkworm cocoons has been reported to act as a carrier of microsporidian parasite Nosema bombycis that causes pebrine disease in silkworms. In dried fish, insect infestation leads to higher bacterial count and uric acid levels. Insects cause damage in hides and skins affecting their subsequent use for making leather products. The trend in stored product insect pest management is skewing in favour of pest prevention, monitoring, housekeeping and finally control. Hermetic storage system can be supplemented with CO2 or phosphine application to achieve quicker results. Pest detection and monitoring has gained significance as an important tool in insect pest management. Pheromone traps originally intended for detection of infestations have been advanced as a mating disruption device ensuing pest suppression in storage premises and processing facilities; pheromones also have to undergo registration protocols similar to conventional insecticides in some countries. Control measures involve reduced chemical pesticide use and more non-chemical inputs such as heat, cold/freezing and desiccants. Furthermore, there is an expanding organic market where physical and biological agents play a key role. The management options for insect control depend on the necessity or severity of pest incidence. Generally, nonchemical treatments, except heat, require more treatment time or investment in expensive equipment or fail to achieve 100% insect mortality. Despite insect resistance, environmental issues and residue problems, chemical control is inevitable and continues to be the most effective and rapid control method. There are limited options with respect to alternative fumigants and the alternatives have constraints as regards environmental and health concerns, cost, and other logistics. For fumigation of fresh agricultural produce, new formulations of ethyl formate and phosphine are commercially applied replacing methyl bromide. Resistance management is now another component of stored product pest management. In recent times, fumigation techniques have improved taking into consideration possible insect resistance. Insect control deploying nanoparticles, alone or as carriers for other control agents, is an emerging area with promising results. As there is no single compound with all the desired qualities, a necessity has arisen to adopt multiple approaches. Cocktail applications or combination treatments (IGRs plus organophosphorus insecticides, diatomaceous earth plus contact insecticides, nanoparticles plus insecticides/pathogens/phytocompounds and conventional fumigants plus CO2; vacuum plus fumigant) have been proved to be more effective. The future of store product insect pest management is deployment of multiple approaches and/or combination treatments to achieve the goal quickly and effectively.


2018 ◽  
Author(s):  
Oscar A. Douglas-Gallardo ◽  
Cristián Gabriel Sánchez ◽  
Esteban Vöhringer-Martinez

<div> <div> <div> <p>Nowadays, the search of efficient methods able to reduce the high atmospheric carbon dioxide concentration has turned into a very dynamic research area. Several environmental problems have been closely associated with the high atmospheric level of this greenhouse gas. Here, a novel system based on the use of surface-functionalized silicon quantum dots (sf -SiQDs) is theoretically proposed as a versatile device to bind carbon dioxide. Within this approach, carbon dioxide trapping is modulated by a photoinduced charge redistribution between the capping molecule and the silicon quantum dots (SiQDs). Chemical and electronic properties of the proposed SiQDs have been studied with Density Functional Theory (DFT) and Density Functional Tight-Binding (DFTB) approach along with a Time-Dependent model based on the DFTB (TD-DFTB) framework. To the best of our knowledge, this is the first report that proposes and explores the potential application of a versatile and friendly device based on the use of sf -SiQDs for photochemically activated carbon dioxide fixation. </p> </div> </div> </div>


Sign in / Sign up

Export Citation Format

Share Document