scholarly journals Techno-Economic Viability of Agro-Photovoltaic Irrigated Arable Lands in the EU-Med Region: A Case-Study in Southwestern Spain

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 593
Author(s):  
Guillermo P. Moreda ◽  
Miguel A. Muñoz-García ◽  
M. Carmen Alonso-García ◽  
Luis Hernández-Callejo
Keyword(s):  
Crop Yield ◽  
Production Costs ◽  
Total Production ◽  
Early Potato ◽  
Pv System ◽  
Partial Shading ◽  
Processing Tomato ◽  
Mediterranean Countries ◽  
Pv Modules ◽  
Yield Penalty

Solar photovoltaic (PV) energy is positioned to play a major role in the electricity generation mix of Mediterranean countries. Nonetheless, substantial increase in ground-mounted PV installed capacity could lead to competition with the agricultural use of land. A way to avert the peril is the electricity-food dual use of land or agro-photovoltaics (APV). Here, the profitability of a hypothetical APV system deployed on irrigated arable lands of southwestern Spain is analyzed. The basic generator design, comprised of fixed-tilt opaque monofacial PV modules on a 5 m ground-clearance substructure, featured 555.5 kWp/ha. Two APV shed orientations, due south and due southwest, were compared. Two 4-year annual-crop rotations, cultivated beneath the heightened PV modules and with each rotation spanning 24 ha, were studied. One crop rotation was headed by early potato, while the other was headed by processing tomato. All 9 crops involved fulfilled the two-fold condition of being usually cultivated in the area and compatible with APV shed intermitent shading. Crop revenues under the partial shading of PV modules were derived from official average yields in the area, through the use of two alternative sets of coefficients generated for low and high crop-yield shade-induced penalty. Likewise, two irrigation water sources, surface and underground, were compared. Crop total production costs, PV system investment and operating costs and revenues from the sale of electricity, were calculated. The internal rates of return (IRRs) obtained ranged from a minimum of 3.8% for the combination of southwest orientation, early-potato rotation, groundwater and high shade-induced crop-yield penalty, to a maximum of 5.6% for the combination of south orientation, processing-tomato rotation, surface water and low shade-induced crop-yield penalty.

scholarly journals Operation of TUT Solar PV Power Station Research Plant under Partial Shading Caused by Snow and Buildings

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Diego Torres Lobera ◽  
Anssi Mäki ◽  
Juha Huusari ◽  
Kari Lappalainen ◽  
Teuvo Suntio ◽  
...  
Keyword(s):  
Measuring System ◽  
Climatic Data ◽  
Building Structures ◽  
Solar Pv ◽  
Research Facility ◽  
Electrical Measurements ◽  
Pv System ◽  
Partial Shading ◽  
Power Characteristics ◽  
Pv Modules

A grid connected solar photovoltaic (PV) research facility equipped with comprehensive climatic and electric measuring systems has been designed and built in the Department of Electrical Engineering of the Tampere University of Technology (TUT). The climatic measuring system is composed of an accurate weather station, solar radiation measurements, and a mesh of irradiance and PV module temperature measurements located throughout the solar PV facility. Furthermore, electrical measurements can be taken from single PV modules and strings of modules synchronized with the climatic data. All measured parameters are sampled continuously at 10 Hz with a data-acquisition system based on swappable I/O card technology and stored in a database for later analysis. The used sampling frequency was defined by thorough analyses of the PV system time dependence. Climatic and electrical measurements of the first operation year of the research facility are analyzed in this paper. Moreover, operation of PV systems under partial shading conditions caused by snow and building structures is studied by means of the measured current and power characteristics of PV modules and strings.

scholarly journals Thermographic and electrical characterization of a photovoltaic panel under partial shading conditions: a case study

ACTA IMEKO ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 93
Author(s):  
Giovanni Bucci ◽  
Fabrizio Ciancetta ◽  
Edoardo Fiorucci ◽  
Antonio Delle Femine
Keyword(s):  
Electrical Characterization ◽  
Testing Procedure ◽  
Pv System ◽  
Partial Shading ◽  
Photovoltaic Panel ◽  
Pv Module ◽  
Pv Modules ◽  
Consequent Reduction

<p class="Abstract">Shading is one of the most critical factors that produces a reduction in power in photovoltaic (PV) modules. The main causes of shading are related to cloud cover; local specificity; natural characteristics; building and other civil works; and the presence of the PV system itself. A reduction in overall radiation produces a consequent reduction in electric power. Another more problematic effect is associated with the partial shading of the PV modules. The shaded cell behaves as a load, dissipating energy and increasing its temperature. This effect can involve irreversible changes to the PV module, with a decrease in performance that can even cause the destruction of the shaded cell.</p><p>The main aim of this work is the development of a testing procedure for the performance evaluation of commercial PV modules in the presence of partial shading on one cell. Tests were carried out using thermographic and electric measurements and by varying the shading levels according to IEC standards. Shading up to total darkening is achieved by means of a number of filters that reduce the direct solar irradiance.</p><p>As a case study, a complete characterisation of a 180 Wp polycrystalline PV module was performed according to the proposed testing procedure, showing that high temperatures can be measured on the shaded PV module surface even if only 50 % of the surface of one cell of the PV module is darkened.</p>

scholarly journals Power dissipation analysis of PV module under partial shading

2021 ◽  
Vol 11 (2) ◽  
pp. 1029
Author(s):  
Byunggyu Yu ◽  
Seok-Cheol Ko
Keyword(s):  
Power Dissipation ◽  
Input Voltage ◽  
Maximum Power ◽  
Pv System ◽  
Partial Shading ◽  
Point Tracking ◽  
Pv Inverter ◽  
Pv Module ◽  
Pv Modules ◽  
Total Maximum

Photovoltaic (PV) generation has been growing dramatically over the last years and it ranges from small, rooftop-mounted or building integrated systems, to large utility scale power stations. Especially for rooftop-mounted PV system, PV modules are serially connected to match with PV inverter input voltage specification. For serially connected PV system, shading is a problem since the shaded PV module reduces the output whole string of PV modules. The excess power from the unshaded PV module is dissipated in the shaded PV module. In this paper, power dissipation of PV module under partial shading is analyzed with circuit analysis for series connected PV modules. The specific current and voltage operating point of the shaded PV module are analyzed under shading. PSIM simulation tool is used to verify the power dissipation analysis. When there is no bypass diode and three solar modules are connected in series, upto 39.1% of the total maximum PV power is dissipated in the shaded PV module. On the other hand, when the bypass is attached, 0.3% of the total maximum power is generated as a loss in the shaded PV module. The proposed analysis technique of shaded PV module could be used in PV system performance analysis, especially for maximum power point tracking (MPPT) performance.

Immaterial Cost and Production: Maximum Production Cost Level Through Marginal Approach

2020 ◽  
Vol 8 (2) ◽  
pp. 128-149
Author(s):  
Dini Maulana Lestari
Keyword(s):  
Quantitative Study ◽  
Marginal Cost ◽  
Production Cost ◽  
Maximum Level ◽  
Production Costs ◽  
Total Production ◽  
Sugar Factory ◽  
Maximum Production ◽  
Cost Approach ◽  
South Sulawesi

This paper will discuss about the immaterial costs and production yields at one of the refined sugar factory companies in Makassar, South Sulawesi. The theory is based on the fact that Immaterial is a cost that is almsgiving, meaning costs that are outside of the basic costs of the company in producing production, so this research aims to find out: (1) what is the production cost needed to produce this production, (2) the maximum level of production at company from 2013 to 2017. This type of research is a quantitative study because it uses a questionnaire in the form of values ​​that are processed using the marginal cost approach formula. The results of the analysis show that (1) the maximum level of production costs occurred in 2016 amounting to 6,912 with an Immaterial cost of Rp. 2,481,796,800 and the total production produced is 359,077.3 tons (2) The required workforce with the total production produced is 359,077.3 tones of 180 people including the maximum production point which means that the lowest value is achieved (optimal).    

MINIMALISASI BIAYA SIMPAN DAN BIAYA SETUP PADA MULTIPLE PRODUK: SIMULASI DENGAN CAPACITATED LOT SIZING PROBLEM

2019 ◽  
Vol 4 (2) ◽  
pp. 205-214
Author(s):  
Erika Fatma
Keyword(s):  
Production Cost ◽  
Lot Sizing ◽  
Setup Time ◽  
Production Costs ◽  
Total Production ◽  
Product Cycle ◽  
Lot Size ◽  
Setup Costs ◽  
Lot Sizing Problem ◽  
Capacitated Lot Sizing

Lot sizing problem in production planning aims to optimize production costs (processing, setup and holding cost) by fulfilling demand and resources capacity costraint. The Capacitated Lot sizing Problem (CLSP) model aims to balance the setup costs and inventory costs to obtain optimal total costs. The object of this study was a plastic component manufacturing company. This study use CLSP model, considering process costs, holding costs and setup costs, by calculating product cycle and setup time. The constraint of this model is the production time capacity and the storage capacity of the finished product. CLSP can reduce the total production cost by 4.05% and can reduce setup time by 46.75%.  Keyword: Lot size, CLSP, Total production cost.

scholarly journals Reconfigurable Distributed Power Electronics Technique for Solar PV Systems

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1121
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Energy Yield ◽  
Solar Pv ◽  
Charge Redistribution ◽  
Pv System ◽  
Partial Shading ◽  
Pv Systems ◽  
Simulation Based ◽  
In Series ◽  
A Cell ◽  
Power Balancing

A reconfiguration technique using a switched-capacitor (SC)-based voltage equalizer differential power processing (DPP) concept is proposed in this paper for photovoltaic (PV) systems at a cell/subpanel/panel-level. The proposed active diffusion charge redistribution (ADCR) architecture increases the energy yield during mismatch and adds a voltage boosting capability to the PV system under no mismatch by connected the available PV cells/panels in series. The technique performs a reconfiguration by measuring the PV cell/panel voltages and their irradiances. The power balancing is achieved by charge redistribution through SC under mismatch conditions, e.g., partial shading. Moreover, PV cells/panels remain in series under no mismatch. Overall, this paper analyzes, simulates, and evaluates the effectiveness of the proposed DPP architecture through a simulation-based model prepared in PSIM. Additionally, the effectiveness is also demonstrated by comparing it with existing conventional DPP and traditional bypass diode architecture.

scholarly journals Maximum Power Point Tracking of PV Systems under Partial Shading Conditions Based on Opposition-Based Learning Firefly Algorithm

2021 ◽  
Vol 13 (5) ◽  
pp. 2656
Author(s):  
Ahmed G. Abo-Khalil ◽  
Walied Alharbi ◽  
Abdel-Rahman Al-Qawasmi ◽  
Mohammad Alobaid ◽  
Ibrahim M. Alarifi
Keyword(s):  
Firefly Algorithm ◽  
Maximum Power ◽  
Pv System ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Point Tracking ◽  
Opposition Based Learning ◽  
Power Point Tracking ◽  
Convergence Process ◽  
Power Point

This work presents an alternative to the conventional photovoltaic maximum power point tracking (MPPT) methods, by using an opposition-based learning firefly algorithm (OFA) that improves the performance of the Photovoltaic (PV) system both in the uniform irradiance changes and in partial shading conditions. The firefly algorithm is based on fireflies’ search for food, according to which individuals emit progressively more intense glows as they approach the objective, attracting the other fireflies. Therefore, the simulation of this behavior can be conducted by solving the objective function that is directly proportional to the distance from the desired result. To implement this algorithm in case of partial shading conditions, it was necessary to adjust the Firefly Algorithm (FA) parameters to fit the MPPT application. These parameters have been extensively tested, converging satisfactorily and guaranteeing to extract the global maximum power point (GMPP) in the cases of normal and partial shading conditions analyzed. The precise adjustment of the coefficients was made possible by visualizing the movement of the particles during the convergence process, while opposition-based learning (OBL) was used with FA to accelerate the convergence process by allowing the particle to move in the opposite direction. The proposed algorithm was simulated in the closest possible way to authentic operating conditions, and variable irradiance and partial shading conditions were implemented experimentally for a 60 [W] PV system. A two-stage PV grid-connected system was designed and deployed to validate the proposed algorithm. In addition, a comparison between the performance of the Perturbation and Observation (P&O) method and the proposed method was carried out to prove the effectiveness of this method over the conventional methods in tracking the GMPP.

scholarly journals A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2308
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Experimental Tests ◽  
Energy Yield ◽  
Power Electronic ◽  
Solar Pv ◽  
Partial Shading ◽  
Loss Analysis ◽  
Pv Systems ◽  
Pv Module ◽  
Pv Modules ◽  
In Series

Partial shading affects the energy harvested from photovoltaic (PV) modules, leading to a mismatch in PV systems and causing energy losses. For this purpose, differential power processing (DPP) converters are the emerging power electronic-based topologies used to address the mismatch issues. Normally, PV modules are connected in series and DPP converters are used to extract the power from these PV modules by only processing the fraction of power called mismatched power. In this work, a switched-capacitor-inductor (SCL)-based DPP converter is presented, which mitigates the non-ideal conditions in solar PV systems. A proposed SCL-based DPP technique utilizes a simple control strategy to extract the maximum power from the partially shaded PV modules by only processing a fraction of the power. Furthermore, an operational principle and loss analysis for the proposed converter is presented. The proposed topology is examined and compared with the traditional bypass diode technique through simulations and experimental tests. The efficiency of the proposed DPP is validated by the experiment and simulation. The results demonstrate the performance in terms of higher energy yield without bypassing the low-producing PV module by using a simple control. The results indicate that achieved efficiency is higher than 98% under severe mismatch (higher than 50%).

scholarly journals An Optimized PV Control System Based on the Emperor Penguin Optimizer

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 751
Author(s):  
Mariam A. Sameh ◽  
Mostafa I. Marei ◽  
M. A. Badr ◽  
Mahmoud A. Attia
Keyword(s):  
Duty Cycle ◽  
Optimization Technique ◽  
Pso Algorithm ◽  
Boost Converter ◽  
Emperor Penguin ◽  
Pv System ◽  
Partial Shading ◽  
Pv Systems ◽  
Point Tracking ◽  
Grid Connected Inverter

During the day, photovoltaic (PV) systems are exposed to different sunlight conditions in addition to partial shading (PS). Accordingly, maximum power point tracking (MPPT) techniques have become essential for PV systems to secure harvesting the maximum possible power from the PV modules. In this paper, optimized control is performed through the application of relatively newly developed optimization algorithms to PV systems under Partial Shading (PS) conditions. The initial value of the duty cycle of the boost converter is optimized for maximizing the amount of power extracted from the PV arrays. The emperor penguin optimizer (EPO) is proposed not only to optimize the initial setting of duty cycle but to tune the gains of controllers used for the boost converter and the grid-connected inverter of the PV system. In addition, the performance of the proposed system based on the EPO algorithm is compared with another newly developed optimization technique based on the cuttlefish algorithm (CFA). Moreover, particle swarm optimization (PSO) algorithm is used as a reference algorithm to compare results with both EPO and CFA. PSO is chosen since it is an old, well-tested, and effective algorithm. For the evaluation of performance of the proposed PV system using the proposed algorithms under different PS conditions, results are recorded and introduced.

Sign in / Sign up

Export Citation Format

Share Document