scholarly journals Integrating CAD and 3D-Printing Techniques to Construct an In Vitro Laser Standard Treatment Platform for Evaluating the Effectiveness of Sterilization by Er:YAG Laser in Peri-Implant Intra-Bony Defects

2020 ◽  
Vol 10 (10) ◽  
pp. 3431
Author(s):  
Shih-Hao Chang ◽  
Hsiang-I Mei ◽  
Chun-Li Lin
Keyword(s):  
Escherichia Coli ◽  
3D Printing ◽  
Laser Irradiation ◽  
Dental Implants ◽  
Bacterial Adhesion ◽  
Er:Yag Laser ◽  
Bony Defect ◽  
Mandibular Incisor ◽  
Printing Techniques

This study established an in vitro model mimicking clinical peri-implant intra-bony defects. We investigated the effect of access limitation and the bactericidal effectiveness of erbium-doped yttrium, aluminum and garnet (Er:YAG) laser irradiation in shallow and deep peri-implant defects at different tooth positions. Reverse engineering, computer-aided design (CAD), and 3D-printing techniques were integrated to establish physical peri-implant intra-bony defect models at mandibular central incisor, first premolar, and first molar positions with shallow (2 mm depth) or deep (6 mm depth) defects and with 1.5 mm and 1.8 mm widths at the bottom and crestal portions of the alveolar process, respectively. Three-dimensional printed suites at the corresponding implant sites replaced experimental implant specimens for the investigation of bacterial adhesion in individuals. Dental implants with diameters of 3, 4 and 5 mm were utilized at the mandibular incisor, premolar, and molar positions, respectively. Bacterial adhesion of Gram (–) Escherichia coli on the exposed implant surfaces prior to sterilization was assessed. Sterilization with shallow and deep intra-bony defects was investigated by measuring the reduction of residual viable bacteria on implants after 60 s of irradiation with an Er:YAG laser. The adhesion rate of Gram (–) Escherichia coli on the investigated implant surfaces ranged from 1% to 3% (1.76 ± 1.25%, 2.19   ±   0.75% and 2.66   ±   1.26% for 3, 4, and 5 mm implants, respectively). With shallow peri-implant bony defects, the Er:YAG laser sterilization rates were 99.6 ± 0.5%, 99.3   ±   0.41% and 93.8 ± 7.65% at mandibular incisor, premolar, and molar positions, respectively. Similarly, sterilization rates in deep peri-implant defects were 99 ± 1.35%, 99.1 ± 0.98% and 97.14 ± 2.57%, respectively. A 3D-printed model with replaceable implant specimens mimicking human peri-implant intra-bony defects was established and tested in vitro. This investigation demonstrated effective sterilization using Er:YAG laser irradiation in both shallow and deep peri-implant intra-bony defects at different positions and diameters of dental implants.

Effect of Er:YAG laser irradiation on deciduous enamel roughness and bacterial adhesion: An in vitro study

2019 ◽  
Author(s):  
Bernardo Teutle‐Coyotecatl ◽  
Rosalía Contreras‐Bulnes ◽  
Rogelio José Scougall‐Vilchis ◽  
Argelia Almaguer‐Flores ◽  
Laura Emma Rodríguez‐Vilchis ◽  
...  
Keyword(s):  
Laser Irradiation ◽  
Bacterial Adhesion ◽  
Er:Yag Laser ◽  
In Vitro Study ◽  
Vitro Study ◽  
Enamel Roughness

scholarly journals Er:YAG laser-induced damage to a dental composite in simulated clinical scenarios for inadvertent irradiation: an in vitro study

2021 ◽  
Author(s):  
Katharina Kuhn ◽  
Carmen U. Schmid ◽  
Ralph G. Luthardt ◽  
Heike Rudolph ◽  
Rolf Diebolder
Keyword(s):  
Laser Irradiation ◽  
Laser Fluence ◽  
Ablation Threshold ◽  
Er:Yag Laser ◽  
In Vitro Study ◽  
Vitro Study ◽  
Crater Diameter ◽  
Clinical Scenarios ◽  
Laser Induced Damage

AbstractInadvertent Er:YAG laser irradiation occurs in dentistry and may harm restorative materials in teeth. The aim of this in vitro study was to quantify Er:YAG laser-induced damage to a nanohybrid composite in simulated clinical scenarios for inadvertent direct and indirect (reflection) laser irradiation. The simulation was performed by varying the output energy (OE;direct˃indirect) reaching the specimen and the operating distance (OD;direct˂indirect). Composite specimens were irradiated by an Er:YAG laser. The ablation threshold was determined and clinically relevant parameters were applied (n = 6 for each OE/OD combination) for direct (OE: 570 mJ/OD: 10 mm, OE: 190 mJ/OD: 10 mm) and indirect irradiation (OE: 466 mJ/OD: 15 mm, OE: 57 mJ/OD: 15 mm, OE: 155 mJ/OD: 15 mm, OE: 19 mJ/OD: 15 mm). The extent of damage in the form of craters was evaluated using a laser scanning microscope (LSM) and a conventional light microscope (LM). The ablation threshold was determined to be 2.6 J/cm2. The crater diameter showed the highest value (LM: 1075 ± 18 µm/LSM: 1082 ± 17 µm) for indirect irradiation (reflectant:dental mirror) (OE: 466 mJ/OD: 15 mm). The crater depth showed the highest and comparable value for direct (OE: 570 mJ/OD: 10 mm; LSM: 89 ± 2 µm) and indirect irradiation (OE: 466 mJ/OD: 15 mm; LSM: 90 ± 4 µm). For each OD, the crater diameter, depth, and volume increased with higher laser fluence. However, the OD—and thus the laser spot diameter—also had an enlarging effect. Thus, indirect irradiation (reflectant:dental mirror) with only 47% of the laser fluence of direct irradiation led to a larger diameter and a comparable depth. The three-dimensional extent of the crater was large enough to cause roughening, which may lead to plaque accumulation and encourage caries, gingivitis, and periodontitis under clinical conditions. Clinicians should be aware that reflected irradiation can still create such craters.

scholarly journals Screening of Escherichia coli Species Biodiversity Reveals New Biofilm-Associated Antiadhesion Polysaccharides

mBio ◽  
2011 ◽  
Vol 2 (3) ◽  
Author(s):  
Olaya Rendueles ◽  
Laetitia Travier ◽  
Patricia Latour-Lambert ◽  
Thierry Fontaine ◽  
Julie Magnus ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Bacterial Adhesion ◽  
Bioactive Molecules ◽  
Bacterial Biofilms ◽  
Gram Positive ◽  
Content Type ◽  
E Coli ◽  
Species Biodiversity

ABSTRACTBacterial biofilms often form multispecies communities in which complex but ill-understood competition and cooperation interactions occur. In light of the profound physiological modifications associated with this lifestyle, we hypothesized that the biofilm environment might represent an untapped source of natural bioactive molecules interfering with bacterial adhesion or biofilm formation. We produced cell-free solutions extracted fromin vitromature biofilms formed by 122 naturalEscherichia coliisolates, and we screened these biofilm extracts for antiadhesion molecules active on a panel of Gram-positive and Gram-negative bacteria. Using this approach, we showed that 20% of the tested biofilm extracts contained molecules that antagonize bacterial growth or adhesion. We characterized a compound, produced by a commensal animalE. colistrain, for which activity is detected only in biofilm extract. Biochemical and genetic analyses showed that this compound corresponds to a new type of released high-molecular-weight polysaccharide whose biofilm-associated production is regulated by the RfaH protein. We demonstrated that the antiadhesion activity of this polysaccharide was restricted to Gram-positive bacteria and that its production reduced susceptibility to invasion and provided rapid exclusion ofStaphylococcus aureusfrom mixedE. coliandS. aureusbiofilms. Our results therefore demonstrate that biofilms contain molecules that contribute to the dynamics of mixed bacterial communities and that are not or only poorly detected in unconcentrated planktonic supernatants. Systematic identification of these compounds could lead to strategies that limit pathogen surface colonization and reduce the burden associated with the development of bacterial biofilms on medical devices.IMPORTANCEWe sought to demonstrate that bacterial biofilms are reservoirs for unknown molecules that antagonize bacterial adhesion. The use of natural strains representative ofEscherichia colispecies biodiversity showed that nonbiocidal antiadhesion polysaccharides are frequently found in mature biofilm extracts (bacterium-free suspensions which contain soluble molecules produced within the biofilm). Release of an antiadhesion polysaccharide confers a competitive advantage upon the producing strain against clinically relevant pathogens such asStaphylococcus aureus. Hence, exploring the biofilm environment provides a better understanding of bacterial interactions within complex communities and could lead to improved control of pathogen colonization.

Antibacterial Efficacy of Diode and Er:YAG Laser Irradiation in Experimentally Contaminated Primary Molar Root Canals

2009 ◽  
Vol 34 (1) ◽  
pp. 43-48 ◽  
Author(s):  
Senem Selvi Kuvvetli ◽  
Nuket Sandalli ◽  
Nursen Topcuoglu ◽  
Guven Kulekci
Keyword(s):  
Laser Irradiation ◽  
Diode Laser ◽  
Er:Yag Laser ◽  
Positive Control ◽  
Control Group ◽  
Antibacterial Efficacy ◽  
Primary Molar ◽  
Root Canals ◽  
Number Of Bacteria

Objective: In vitro comparison of the antibacterial efficacy of Diode and Er:YAG laser irradiation with that of NaOCl irrigation in contaminated primary molar root canals. Study Design: 96 root canals prepared from 32 extracted primary molar teeth were mechanically enlarged and the teeth were randomly divided into 4 subgroups. The roots were inoculated with an overnight culture of Enterococcus faecalis in tryptic soy broth for 24 hours. The root canals irradiated with diode and Er:YAG laser and irrigated with NaOCl(5.25%) were experimental groups and untreated canals served as positive control group. Bacterial growth was analysed by counting viable E.faecalis on tryptic soy agar plates. Results: The number of bacteria was significantly reduced in experimental groups in comparison with the control group. Diode laser was determined to be more effective in reducing the number of bacteria when compared to Er:YAG laser. NaOCl irrigation was found significantly most effective. Conclusions: Diode laser irradiation and 5.25 % NaOCl application provided a significant antibacterial effect in vitro, in contaminated primary molar root canals.

scholarly journals Effect of Er:YAG laser irradiation on acid resistance to bovine dentin in vitro.

2000 ◽  
Vol 41 (2) ◽  
pp. 43-48 ◽  
Author(s):  
ATSUSHI KAMEYAMA ◽  
HIROSHI KOGA ◽  
MASAKAZU TAKIZAWA ◽  
YOSHINORI TAKAESU ◽  
YOSHITO HIRAI
Keyword(s):  
Laser Irradiation ◽  
Er:Yag Laser ◽  
Acid Resistance

scholarly journals In Vitro Evaluation of Bacterial Adhesion and Bacterial Viability of Streptococcus mutans, Streptococcus sanguinis, and Porphyromonas gingivalis on the Abutment Surface of Titanium and Zirconium Dental Implants

2019 ◽  
Vol 2019 ◽  
pp. 1-5 ◽  
Author(s):  
Ana Stefany Meza-Siccha ◽  
Miguel Angel Aguilar-Luis ◽  
Wilmer Silva-Caso ◽  
Fernando Mazulis ◽  
Carolina Barragan-Salazar ◽  
...  
Keyword(s):  
Dental Implants ◽  
Streptococcus Mutans ◽  
Porphyromonas Gingivalis ◽  
Bacterial Adhesion ◽  
Bacterial Species ◽  
Bacterial Adherence ◽  
Bacterial Viability ◽  
Streptococcus Sanguinis ◽  
Group 2

Objective. To evaluate the in vitro adherence and viability of 3 bacterial species Streptococcus mutans (ATCC 25175), Streptococcus sanguinis (ATCC 10556), and Porphyromonas gingivalis (ATCC 33277) on the surfaces of dental implants of titanium, zirconium, and their respective fixing screws. Methods. Two analysis groups were formed: group 1 with 3 titanium pillars and group 2 with 3 zirconium pillars, each with their respective fixing screws. Each of these groups was included in tubes with bacterial cultures of Streptococcus mutans (ATCC 25175), Streptococcus sanguinis (ATCC 10556), and Porphyromonas gingivalis (ATCC 33277). These samples were incubated at 37°C under anaerobic conditions. Bacterial adherence was assessed by measurement of the change in colony-forming units (CFU), and bacterial viability was evaluated with the colorimetric test of 3-(4,5-dimethylthiazol-2)-2,5 diphenyl tetrazolium bromide (MTT). Results. The bacterial adhesion in the titanium abutments was higher for Streptococcus mutans (190.90 CFU/mL), and the viability was greater in Porphyromonas gingivalis (73.22%). The zirconium abutment group showed the highest adherence with Streptococcus mutans (331.82 CFU/mL) and the highest bacterial viability with the S. sanguinis strain (38.42%). The titanium fixation screws showed the highest adhesion with S. sanguinis (132.5 CFU/mL) compared to the zirconium fixation screws where S. mutans had the highest adhesion (145.5 CFU/mL). The bacterial viability of S. mutans was greater both in the titanium fixation screws and in the zirconium fixation screws 78.04% and 57.38%, respectively. Conclusions. Our results indicate that there is in vitro bacterial adherence and viability in both titanium abutments and zirconium abutments and fixation screws for both. Streptococcus mutans is the microorganism that shows the greatest adherence to the surfaces of both titanium and zirconium and the fixing screws of the latter. On the contrary, bacterial viability is greater on the titanium abutments with P. gingivalis than on the zirconium abutments with S. sanguinis. With respect to the fixation screws, in both cases, the viability of S. mutans was greater with respect to the other bacteria. In general, the titanium abutments showed less adherence but greater bacterial viability.

A review on 3D printing in tissue engineering applications

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohan Prasath Mani ◽  
Madeeha Sadia ◽  
Saravana Kumar Jaganathan ◽  
Ahmad Zahran Khudzari ◽  
Eko Supriyanto ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Cell Adherence ◽  
Engineering Applications ◽  
Proliferation And Differentiation ◽  
3D Printed ◽  
Printing Techniques

Abstract In tissue engineering, 3D printing is an important tool that uses biocompatible materials, cells, and supporting components to fabricate complex 3D printed constructs. This review focuses on the cytocompatibility characteristics of 3D printed constructs, made from different synthetic and natural materials. From the overview of this article, inkjet and extrusion-based 3D printing are widely used methods for fabricating 3D printed scaffolds for tissue engineering. This review highlights that scaffold prepared by both inkjet and extrusion-based 3D printing techniques showed significant impact on cell adherence, proliferation, and differentiation as evidenced by in vitro and in vivo studies. 3D printed constructs with growth factors (FGF-2, TGF-β1, or FGF-2/TGF-β1) enhance extracellular matrix (ECM), collagen I content, and high glycosaminoglycan (GAG) content for cell growth and bone formation. Similarly, the utilization of 3D printing in other tissue engineering applications cannot be belittled. In conclusion, it would be interesting to combine different 3D printing techniques to fabricate future 3D printed constructs for several tissue engineering applications.

Antimicrobial effect of Er:YAG laser irradiation in infected root canals: an in vitro study

2003 ◽  
Author(s):  
Marcelo Sampaio Moura ◽  
Fatima A. A. Zanin ◽  
Aldo Brugnera, Jr. ◽  
Cyntia Rodrigues de Araujo Estrela ◽  
Carlos Estrela ◽  
...  
Keyword(s):  
Laser Irradiation ◽  
Er:Yag Laser ◽  
In Vitro Study ◽  
Antimicrobial Effect ◽  
Vitro Study ◽  
Root Canals ◽  
Infected Root
Sign in / Sign up

Export Citation Format

Share Document