scholarly journals Use of Unbound Materials for Sustainable Road Infrastructures

2020 ◽  
Vol 10 (10) ◽  
pp. 3465 ◽  
Author(s):  
Donato Ciampa ◽  
Raffaele Cioffi ◽  
Francesco Colangelo ◽  
Maurizio Diomedi ◽  
Ilenia Farina ◽  
...  
Keyword(s):  
Grain Size ◽  
Environmental Sustainability ◽  
Steel Production ◽  
Road Construction ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Continuous Increase ◽  
Waste Dumps ◽  
Granulated Slag

The growing environmental sensitivity and the reduction of natural resources create, in Italy and other developed countries, an increasing interest in the search for alternative materials to be used in road construction works. In recent years, the problems related to environmental sustainability have made it increasingly difficult to remove natural aggregates from quarries and, at the same time, the regulations for the management of waste dumps are more and more restrictive. For this reason, the use of recycled aggregates is experiencing a continuous increase in the civil construction sector. This paper deals with the study of construction and demolition waste (CDW) in the field of road construction, in particular for the construction of embankment, road subgrades, foundation layers and unbound bases for flexible superstructures. Three different particle size fractions were used to prepare the mixtures: the first having a coarse size and designation 0–63 mm, the second intermediate size with aggregates of 0–31.5 mm grain size and the third with the finest aggregates having a grain size of 0–4 mm. The study was carried out by analyzing three granulometric fractions, verifying the best application for each of them. Subsequently, the mix-design was investigated, operating in compliance with the requirements imposed by UNI 11531-1, EN ISO 14688, EN 13242 and EN 13285. For the unbound layers of subgrade, foundation and base, which require greater resistance to fragmentation, the use of CDW alone has shown some limitations. Therefore, in the experimentation, it was decided to mix the CDW with a granulated slag coming from the steel production in the electric arc furnaces (EAF) and with an additional CDW (0–31.5 mm) coming from the recovery of concrete with slag. EAF granulated slag was used in small quantities, due to its relatively high cost. Four eco-friendly and recycled mixtures were studied, with low economic impact and high environmental sustainability, suitable for the construction of unbound layers of road superstructures.

scholarly journals Recycling construction and demolition wastes within hydraulically bound mixtures for road pavements

2021 ◽  
Author(s):  
Marco Pasetto ◽  
Andrea Baliello ◽  
Giovanni Giacomello ◽  
Emiliano Pasquini
Keyword(s):  
Construction Industry ◽  
Environmental Sustainability ◽  
Road Construction ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
The Road ◽  
Construction And Demolition Wastes ◽  
European Standards ◽  
Water Contents ◽  
Mineral Aggregates

The recycling of Construction and Demolition Waste (CDW) is an actual challenge regarding the construction industry because of the increasing volumes worldwide produced and the related environmental impacts. In this regard, a suitable application can be developed in the road construction field, in particular for the production of hydraulically bound mixtures for road subbase and foundation layers. In this sense, the reuse of CDW can strongly enhance the environmental sustainability of road construction thanks to the achievable savings of natural resources such as the mineral aggregates obtained from quarry operations. Indeed, the utilization of a CDW as aggregate must ensure the production of mixtures with adequate mechanical and environmental characteristics. Therefore, the herein paper presents the results of an experimental characterization aimed at assessing the suitability of CDW for the production of hydraulically bound mixtures for road pavements. In particular, the main mechanical properties of some mixtures including different percentages and gradations of CDW were analysed and compared with the main technical prescriptions and classification criteria indicated by the reference European standards. Basic properties and production processes of the CDW materials were also studied to determine their effects on the optimum binder and water contents of the mixtures. The research clearly demonstrated that the use of a preliminary-washed CDW coarse aggregate was able to enhance the overall structural properties and the water resistance of mixtures.

scholarly journals Feasible Use of Recycled Concrete Aggregates with Alumina Waste in Road Construction

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1466
Author(s):  
Manuel Cabrera ◽  
Mónica López-Alonso ◽  
Laura Garach ◽  
Javier Alegre ◽  
Javier Ordoñez ◽  
...  
Keyword(s):  
Second Life ◽  
Road Construction ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
The Road ◽  
Road Pavement ◽  
Pavement Base ◽  
By Products

The management of different industrial by-products, such as recycled aggregates from construction and demolition waste and alumina by-products, as well as the reduction of landfill deposits by incorporating these products in a second life cycle, were the focus of this work. The aim of this study was to demonstrate the technical viability of using these waste and by-product as a material for road pavement base layers. For this purpose, a real-scale application was carried out, and the behavior of three types of materials, applied on a section of an experimental road under real vehicle traffic conditions, was studied and compared. Three materials were used in these sections applied in the road sub-bases. First, a control material composed of a type of artificial gravel was used to be compared with the rest of materials; the second material was composed of recycled aggregates, and the third was composed of a mix of recycled aggregates and alumina waste. The results concluded that the effectiveness of the sections built using recycled aggregates and alumina waste was very positive and similar those constructed using natural aggregates.

scholarly journals Application of Construction and Demolition Waste in Civil Construction in the Brazilian Amazon—Case Study of the City of Rio Branco

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2247
Author(s):  
Fernando da Silva Souza ◽  
José Maria Franco de Carvalho ◽  
Gabriela Grotti Silveira ◽  
Vitória Cordeiro Araújo ◽  
Ricardo André Fiorotti Peixoto
Keyword(s):  
Mechanical Strength ◽  
Raw Materials ◽  
Amazon Region ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Federal State ◽  
Construction Sites ◽  
Demolition Waste ◽  
Conventional Concrete ◽  
Initial Adhesion

The lack of usable aggregates for civil construction in Rio Branco (capital of Acre, a Federal State in the Amazon region) makes the production and use of recycled aggregates from construction and demolition waste (CDW) an alternative of great interest. In this study, a comprehensive characterization of CDW collected from 24 construction sites of six building types and three different construction phases (structures, masonry, and finishing) was carried out. The fine and coarse recycled aggregates were produced and evaluated in 10 different compositions. The aggregates’ performance was evaluated in four mixtures designed for laying and coating mortars with a total replacement of conventional aggregates and a mixture designed for a C25 concrete with 50% and 100% replacement of conventional aggregates. CDW mortars showed lower densities and greater water retention, initial adhesion, and mechanical strength than conventional mortars. CDW concretes presented lower densities and greater resistance to chloride penetration than conventional concrete, with a small mechanical strength reduction. The recycled CDW aggregates proved to be technologically feasible for safe application in mortars and concrete; for this reason, it is believed that the alternative and proposed methodology is of great interest to the Amazonian construction industry, considering the high costs of raw materials and the need for defining and consolidating a sustainable development model for the Amazon region.

Concrete Production of Hot Asphalt Using Recycled Aggregates CDW

2016 ◽  
Vol 881 ◽  
pp. 346-350 ◽  
Author(s):  
Luzana Leite Brasileiro ◽  
Fátima Maria de Souza Pereira ◽  
Pablo de Abreu Vieira ◽  
José Milton Elias de Matos
Keyword(s):  
Solid Waste ◽  
National Policy ◽  
Mechanical Tests ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Final Destination ◽  
Natural Aggregate ◽  
Concrete Production

Every year, there is a considerable increase in the exploitation of deposits to supply the market for aggregates. On the other hand, so does the production of solid waste from construction and demolition waste (CDW). In 2010 Brazil approved the PNRS (National Policy on Solid Waste), which sets out how the country should have their waste, encouraging recycling and sustainability. As an alternative to the above problem, this paper aims to investigate the feasibility of partial and total replacement of the asphalt concrete aggregates by recycled aggregates from CDW in order to reduce the environmental impacts caused by the operation of quarries and give an adequate final destination the residue produced by man in construction. Were carried out five (05) projects mixture of: the first (parameter of our research) used only natural aggregates (0% CDW) in the second, third and fourth replaced 25%, 50% and 75% respectively of natural aggregate by the recycled aggregate and the fifth and last, used only recycled aggregates (100% CDW). They carried out the characterization of the aggregates by means of physico-chemical and mechanical, analyzing them with reference based on specific standards paving. For mixtures, they calculated the volumetric parameters and performed mechanical tests of tensile strength and stability. The results indicate that the recycled aggregate, in a defined proportion, can replace the natural aggregate in the flexible pavements

scholarly journals Catalogue of Pavements with Recycled Aggregates from Construction and Demolition Waste

Proceedings ◽  
2018 ◽  
Vol 2 (20) ◽  
pp. 1282 ◽  
Author(s):  
Auxi Barbudo ◽  
José Ramón Jiménez ◽  
Jesús Ayuso ◽  
Adela Pérez Galvín ◽  
Francisco Agrela
Keyword(s):  
Point Of View ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Technical Application ◽  
Technical Specifications ◽  
Lack Of Knowledge

Construction and Demolition Waste come from debris generated during construction, renovation and demolition of buildings, roads, and bridges. Recycling and reuse are essential in terms of sustainability, mainly from an environmental point of view. Although the recommendation of the use of these recycled aggregates is currently included in some technical specifications, its use is still not widespread due mainly to the lack of knowledge on their technical application. This work is a compilation of the recommendations proposed in the “Catalogue of road pavements with recycled aggregates”, supported by the construction of experimental stretches. It proposes different structural sections for road pavements by using recycled aggregates.

scholarly journals Effects of Recycled Aggregate Resin (RAR) in Concrete Material

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Sharifah Salwa Mohd Zuki ◽  
◽  
Shahiron Shahidan ◽  
Shivaraj Subramaniam ◽  
◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Engineering Properties ◽  
Recycled Aggregates ◽  
Hardened Concrete ◽  
Demolition Waste ◽  
Split Tensile Strength ◽  
Close Proximity

This paper discussed the recycled aggregates produced from construction and demolition waste and their utilization in concrete construction. Along with a brief overview of the engineering properties of recycled aggregates, the paper also summarizes the effect and use of recycled aggregates on the properties of fresh and hardened concrete. The recycled aggregates were treated with epoxy resin to reduce the water absorptions with different percentages of resin such as 0%, 25%, 50%, 75%, and 100%. Epoxy resin is widely used in recent years owing to the enhancing of mechanical and durability of the concrete. This research also showed, recycled aggregate concrete are close proximity to normal concrete in terms of split tensile strength, compression strength and wet density. The low usage of resin was obtained good strength concrete compared to high percentage contained treated aggregates due to low bonding between material.

scholarly journals Comparative study of the influence of three types of fibre in the shrinkage of recycled mortar

2018 ◽  
Vol 68 (332) ◽  
pp. 168 ◽  
Author(s):  
P. Saiz-Martínez ◽  
D. Ferrández-Vega ◽  
C. Morón-Fernández ◽  
A. Payán de Tejada-Alonso
Keyword(s):  
Negative Impact ◽  
Polypropylene Fiber ◽  
Capacitive Sensor ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Moisture Loss ◽  
Recycled Aggregates ◽  
Fiber Types ◽  
Demolition Waste ◽  
Recycled Concrete Aggregates

Construction and demolition waste can be used as a substitution of natural aggregate in mortar and concrete elaboration. A poorer quality of recycled aggregates generally has negative impact on mortar properties. Shrinkage is one of the properties that experiences worse outcome due to the higher absorption of recycled aggregates. This research evaluates the potential shrinkage of mortars elaborated with recycled concrete aggregates both with and without fibres addition, as well as the relation between moisture loss and shrinkage caused by mortar drying process using a capacitive sensor of the authors’ own design. Two different mortar dosages 1:3 and 1:4 and three fiber types: polypropylene fiber, fiberglass and steel fiber, in different proportions were used. Obtained results show that the use of polypropylene fiber improves the recycled mortars performance against shrinkage in 0.2%. Moreover, a clear relation between dry shrinkage and moisture loss was observed.

scholarly journals Incorporation of recycled aggregates from construction and demolition waste in paver blocks

2020 ◽  
Vol 13 (4) ◽  
Author(s):  
Cinthia Maia Pederneiras ◽  
Maria Del Pilar Durante ◽  
Ênio Fernandes Amorim ◽  
Ruan Landolfo da Silva Ferreira
Keyword(s):  
Natural Resources ◽  
Mechanical Strength ◽  
Reference Sample ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
World Population ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Concrete Blocks ◽  
Modified Block

ABSTRACT: The consumption of natural resources and energy increased proportionally with the growth of the world population and its economic level. There was an increasing exponential consumption of natural resources, which implied an increase in environmental impacts. The construction sector is responsible for a very significant production of construction and demolition waste (CDW). Thus, there is a concern in search of a more sustainable final disposal. Many studies have been investigated the development of new materials with the incorporation of recycled aggregates from CDW. This paper presents a study of performance evaluation of concrete blocks produced with CDW. For that purpose, an experimental campaign was performed, including a characterization of the aggregates used. The incorporation of 100% of fine and coarse recycled aggregates. The mixtures were designed according to the condition of the aggregate (dry, washed or saturated). The performance of these blocks was evaluated in terms of mechanical strength and water absorption. Some additional tests were also performed to deeper analyze of the microstructure of these blocks. To assess the durability of the concrete blocks, a full-scale road was built. The results were very positive, since there were no significant differences between the modified concrete blocks and the reference sample (0% of the CDW). The modified block with fine aggregate presented the best performance of all the blocks, concerning mechanical strength. In addition, the performance of concrete blocks with washed recycled aggregates had a better performance compared to the others. The results obtained were satisfactory for the application of the blocks in the streets with low movement and low load.

Sign in / Sign up

Export Citation Format

Share Document