scholarly journals X-Band Photonic-Based Pulsed Radar Architecture with a High Range Resolution

2020 ◽  
Vol 10 (18) ◽  
pp. 6558
Author(s):  
Youngseok Bae ◽  
Minwoo Yi ◽  
Jinwoo Shin ◽  
Sang-Gug Lee
Keyword(s):  
Continuous Wave ◽  
Optical Switch ◽  
Pulse Repetition Frequency ◽  
Error Rates ◽  
Center Frequency ◽  
Waveform Generator ◽  
Range Resolution ◽  
Fmcw Radar ◽  
X Band ◽  
High Range

In this paper, we propose an X-band photonic-based pulsed radar architecture with a high range resolution. The proposed architecture is operated as a pulsed radar by adding a Mach-Zehnder modulator (MZM) operating as an optical switch to a transmitter of a conventional photonic-based frequency-modulated continuous wave (FMCW) radar. In addition, a balanced photodetector (BPD) is employed to enhance the amplitude of the received signal and remove common-mode noise. A proposed photonic-based pulsed radar prototype is implemented to operate at a center frequency of 10 GHz, a bandwidth of 640 MHz, and a pulse repetition frequency (PRF) of 1 kHz considering the performances of an arbitrary waveform generator (AWG). The implemented prototype is verified through an indoor experiment. As a result, the positions of targets are detected in real-time with 1.6% error rates of a range accuracy and obtained the range resolution of 0.26 m.

scholarly journals Radar Imager for Mars’ Subsurface Experiment—RIMFAX

2020 ◽  
Vol 216 (8) ◽  
Author(s):  
Svein-Erik Hamran ◽  
David A. Paige ◽  
Hans E. F. Amundsen ◽  
Tor Berger ◽  
Sverre Brovoll ◽  
...  
Keyword(s):  
Continuous Wave ◽  
Sand Dunes ◽  
Landing Site ◽  
Wide Band ◽  
Center Frequency ◽  
Depth Range ◽  
Fmcw Radar ◽  
Shallow Subsurface ◽  
Eventual Return ◽  
Ground Penetrating

AbstractThe Radar Imager for Mars’ Subsurface Experiment (RIMFAX) is a Ground Penetrating Radar on the Mars 2020 mission’s Perseverance rover, which is planned to land near a deltaic landform in Jezero crater. RIMFAX will add a new dimension to rover investigations of Mars by providing the capability to image the shallow subsurface beneath the rover. The principal goals of the RIMFAX investigation are to image subsurface structure, and to provide information regarding subsurface composition. Data provided by RIMFAX will aid Perseverance’s mission to explore the ancient habitability of its field area and to select a set of promising geologic samples for analysis, caching, and eventual return to Earth. RIMFAX is a Frequency Modulated Continuous Wave (FMCW) radar, which transmits a signal swept through a range of frequencies, rather than a single wide-band pulse. The operating frequency range of 150–1200 MHz covers the typical frequencies of GPR used in geology. In general, the full bandwidth (with effective center frequency of 675 MHz) will be used for shallow imaging down to several meters, and a reduced bandwidth of the lower frequencies (center frequency 375 MHz) will be used for imaging deeper structures. The majority of data will be collected at regular distance intervals whenever the rover is driving, in each of the deep, shallow, and surface modes. Stationary measurements with extended integration times will improve depth range and SNR at select locations. The RIMFAX instrument consists of an electronic unit housed inside the rover body and an antenna mounted externally at the rear of the rover. Several instrument prototypes have been field tested in different geological settings, including glaciers, permafrost sediments, bioherme mound structures in limestone, and sedimentary features in sand dunes. Numerical modelling has provided a first assessment of RIMFAX’s imaging potential using parameters simulated for the Jezero crater landing site.

scholarly journals Observations of tropical rain with a polarimetric X-band radar: first results from the CHUVA campaign

2012 ◽  
Vol 5 (1) ◽  
pp. 1717-1761
Author(s):  
M. Schneebeli ◽  
J. Sakuragi ◽  
T. Biscaro ◽  
C. F. Angelis ◽  
I. Carvalho da Costa ◽  
...  
Keyword(s):  
Continuous Wave ◽  
Radar Data ◽  
Rain Attenuation ◽  
Fmcw Radar ◽  
X Band ◽  
Rain Drop ◽  
First Results ◽  
Radar Measurements ◽  
Drop Size Distributions ◽  
Set Up

Abstract. A polarimetric X-band radar has been deployed during one month (April 2011) for a field campaign in Fortaleza, Brazil, together with additional sensors like a Ka-band vertically pointing frequency modulated continuous wave (FMCW) radar and three laser disdrometers. The disdrometers as well as the FMCW radar are capable of measuring the rain drop size distributions (DSDs), hence making it possible to forward-model theoretical polarimetric X-band radar observables at the point where the instruments are located. This set-up allows to thoroughly test the accuracy of the X-band radar measurements as well as the algorithms that are used to correct the radar data for radome and rain attenuation. In the first campaign in Fortaleza it was found that radome attenuation dominantly affects the measurements. With an algorithm that is based on the self-consistency of the polarimetric observables, the radome induced reflectivity offset was estimated. Offset corrected measurements were then further corrected for rain attenuation with two different schemes. The performance of the post-processing steps is being analyzed by comparing the data with disdrometer-inferred polarimetric variables that were measured in a distance of 20 km to the radar.

Real-Time FMCW Radar X-Band Signal Acquisition and Visualization

2019 ◽  
pp. 165-179
Author(s):  
Akbar Eslami
Keyword(s):  
Data Acquisition ◽  
Real Time ◽  
Continuous Wave ◽  
Processing System ◽  
Fmcw Radar ◽  
Weather Radars ◽  
X Band ◽  
Recent Developments ◽  
Visualization Systems ◽  
Pulse Doppler

The recent developments in the remote sensing technologies have resulted in large amounts of data transmitted from spaceborne sensors. To keep up with the volume, speed, and variety of these data, new data acquisition and visualization systems need to be developed. This chapter focuses on some design and development considerations for a real-time data acquisition and visualization of X-band in a frequency-modulated continuous wave (FMCW) radar. Relevant issues such as high-speed network, parallel data processing system, and large-scale storage system are discussed. Ideally, the acquisition system should be capable of concurrent processing at low cost and visualization technique should be in the same time scale with other conventional 2D visualization of X-band weather radars. Benefits of this type of radar are that it is not just safe and inexpensive, but also serves as a means in filling in gaps of higher-powered pulse-doppler radars when used in conjunction with them.

A SiGe-based fully-integrated 122-GHz FMCW radar sensor in an eWLB package

2017 ◽  
Vol 9 (6) ◽  
pp. 1219-1230 ◽  
Author(s):  
Muhammad Furqan ◽  
Faisal Ahmed ◽  
Reinhard Feger ◽  
Klaus Aufinger ◽  
Walter Hartner ◽  
...  
Keyword(s):  
Antenna Arrays ◽  
High Performance ◽  
Continuous Wave ◽  
Supply Voltage ◽  
Angular Position ◽  
Frequency Multiplier ◽  
Wafer Level ◽  
Range Resolution ◽  
Fmcw Radar ◽  
Bicmos Technology

High-performance SiGe HBTs and advancements in packaging processes have enabled system-in-package (SiP) designs for millimeter-wave applications. This paper presents a 122-GHz bistatic frequency modulated continuous wave (FMCW) radar SiP. The intended applications for the SiP are short-range distance and angular position measurements as well as communication links between cooperative radar stations. The chip is realized in a 130-nm SiGe BiCMOS technology and is based on a fully differential frequency-multiplier chain with in phase quadrature phase receiver and a binary phase shift keying modulator in the transmit chain. On-wafer measurement results show a maximum transmit output power of 2.7 dBm and a receiver gain of 11 dB. The chip consumes a DC power of 570 mW at a supply voltage of 3.3 V. The fabricated chip is integrated in an embedded wafer level ball grid array (eWLB) package. Transmit/receive rhombic antenna arrays with eight elements are designed in two eWLB packages with and without backside metal, with a measured peak gain of 11 dBi. The transceiver chip size is 1.8 mm × 2 mm, while the package size is 12 mm × 6 mm, respectively. FMCW measurements have been conducted with a sweep bandwidth of up to 17 GHz and a measured range resolution of 1.5 cm has been demonstrated. 2D positions of multiple targets have been computed using two coherently linked radar stations.

Programmable Ultrasound Phased Array Therapy System

2017 ◽  
Author(s):  
Yiying I. Zhu ◽  
Timothy L. Hall ◽  
Oliver D. Kripfgans
Keyword(s):  
High Power ◽  
Duty Cycle ◽  
Focused Ultrasound ◽  
Continuous Wave ◽  
Low Cost ◽  
Uterine Fibroids ◽  
High Intensity Focused Ultrasound ◽  
Center Frequency ◽  
Tissue Ablation ◽  
Waveform Generator

There has been an emerging interest in high intensity focused ultrasound (HIFU) for therapeutic applications. By means of its thermal or mechanical effects, HIFU is able to serve as a direct tool for tissue ablation, or an indirect moderating medium to manipulate microbubbles or perform heating (hyperthermia) for the purpose of targeted drug delivery. The development and testing of HIFU based phased arrays is favorable as their elements allow for individual phasing to steer and focus the beam. While FDA has already approved tissue ablation by HIFU for the treatment of uterine fibroids (2004) and pain from bone metastases (2012), development continues on other possible applications that are less forgiving of incomplete treatment, such as thermal necrosis of malignant masses. Ideally, each element, of such an array must have its own fully programmable electrical driving channel, which allows the control of delay, phase, and amplitude of the output from each element. To enable full control, each channel needs a waveform generator, an amplification device, and an impedance matching circuit between driver and acoustic element. Similar projects utilizing this approach to drive therapeutic arrays include a 512-channel therapy system which was built at the University of Michigan using low cost Field-Programmable Gate Arrays (FPGA) microcontroller and highly efficient MOSFET switching amplifiers [1]. However, this system lacks the ability to drive both, continuous wave (CW) and transient short duty-cycle high power pulses. This paper presents a hybrid system, which is able to perform CW and transient short duty-cycle high power excitation. In the following we will describe the design, programming, fabrication, and evaluation of this radiofrequency (RF) driver system as used in our laboratory for a 1.5 MHz center frequency, 298-element array (Imasonic SA, Besancon, France) [2], FPGA-controlled amplifier boards and matching circuitry. Advantages of our design include: 1. Inexpensive components (<$15/channel); 2. Ability to program/drive individual output channels independently; 3. Sufficient time and amplitude resolution for various acoustic pattern design; 4. Capability of hybrid switching between low power CW and short duty cycle, high instantaneous power.

Interrogation Signal Generation for SAW Temperature Sensor

2013 ◽  
Vol 694-697 ◽  
pp. 1089-1092
Author(s):  
Theng Wei Lee ◽  
Wan Young Chung
Keyword(s):  
Pulse Compression ◽  
Continuous Wave ◽  
Reference Signal ◽  
Phase Lock Loop ◽  
Matlab Simulation ◽  
Waveform Generator ◽  
Compression Technique ◽  
Range Resolution ◽  
Saw Sensor ◽  
Arbitrary Waveform

This paper presents the method to generate frequency modulated continuous wave (FMCW) interrogation signal by using a phase lock loop (PLL) transmitter and NI ELVIS development board. The FMCW interrogation signal can be used for measuring temperature from a surface acoustic wave (SAW) sensor. The development of the PLL transmitter is discussed. The Arbitrary Waveform Generator of NI ELVIS is utilized for generating a linear frequency sweep reference signal, which will be used as a stable input signal for the transmitter. A MATLAB simulation using a pulse compression technique is performed to investigate the relationship between the FMCW bandwidth and range resolution.

Sign in / Sign up

Export Citation Format

Share Document