scholarly journals SVM-Based Bearing Anomaly Identification with Self-Tuning Network-Fuzzy Robust Proportional Multi Integral and Smart Autoregressive Model

2021 ◽  
Vol 11 (6) ◽  
pp. 2784
Author(s):  
Shahnaz TayebiHaghighi ◽  
Insoo Koo
Keyword(s):  
Machine Learning ◽  
Variable Structure ◽  
Rolling Element Bearing ◽  
Crack Identification ◽  
Original Signal ◽  
Signal Modeling ◽  
Residual Signal ◽  
Average Accuracy ◽  
Self Tuning ◽  
The Difference

In this paper, the combination of an indirect self-tuning observer, smart signal modeling, and machine learning-based classification is proposed for rolling element bearing (REB) anomaly identification. The proposed scheme has three main stages. In the first stage, the original signal is resampled, and the root mean square (RMS) signal is extracted from it. In the second stage, the normal resampled RMS signal is approximated using the AutoRegressive with eXternal Uncertainty (ARXU) technique. Moreover, the nonlinearity of the bearing signal is solved using the combination of the ARXU and the machine learning-based regression, which is called AMRXU. After signal modeling by AMRXU, the RMS resampled signal is estimated using a combination of the proportional multi-integral (PMI) technique, the variable structure (VS) Lyapunov technique, and a self-tuning network-fuzzy system (SNFS). Finally, in the third stage, the difference between the original signal and the estimated one is calculated to generate the residual signal. A machine learning-based classification technique is utilized to classify the residual signal. The Case Western Reserve University (CWRU) dataset is used to evaluate anomaly identification performance of the proposed scheme. Regarding the experimental results, the average accuracy for REB crack identification is 98.65%, 97.7%, 97.35%, and 97.67%, respectively, when the motor torque loads are 0-hp, 1-hp, 2-hp, and 3-hp.

scholarly journals Bearing Anomaly Recognition Using an Intelligent Digital Twin Integrated with Machine Learning

2021 ◽  
Vol 11 (10) ◽  
pp. 4602
Author(s):  
Farzin Piltan ◽  
Jong-Myon Kim
Keyword(s):  
Machine Learning ◽  
Variable Structure ◽  
Vibration Signal ◽  
Crack Size ◽  
Approximation Technique ◽  
Digital Twin ◽  
Average Accuracy ◽  
Machine Learning Approach ◽  
The Impact ◽  
Signal Approximation

In this study, the application of an intelligent digital twin integrated with machine learning for bearing anomaly detection and crack size identification will be observed. The intelligent digital twin has two main sections: signal approximation and intelligent signal estimation. The mathematical vibration bearing signal approximation is integrated with machine learning-based signal approximation to approximate the bearing vibration signal in normal conditions. After that, the combination of the Kalman filter, high-order variable structure technique, and adaptive neural-fuzzy technique is integrated with the proposed signal approximation technique to design an intelligent digital twin. Next, the residual signals will be generated using the proposed intelligent digital twin and the original RAW signals. The machine learning approach will be integrated with the proposed intelligent digital twin for the classification of the bearing anomaly and crack sizes. The Case Western Reserve University bearing dataset is used to test the impact of the proposed scheme. Regarding the experimental results, the average accuracy for the bearing fault pattern recognition and crack size identification will be, respectively, 99.5% and 99.6%.

scholarly journals Loss of Smell and Taste Can Accurately Predict COVID-19 Infection: A Machine-Learning Approach

2021 ◽  
Vol 10 (4) ◽  
pp. 570
Author(s):  
María A Callejon-Leblic ◽  
Ramon Moreno-Luna ◽  
Alfonso Del Cuvillo ◽  
Isabel M Reyes-Tejero ◽  
Miguel A Garcia-Villaran ◽  
...  
Keyword(s):  
Machine Learning ◽  
Modelling Framework ◽  
Visual Analog Scales ◽  
Average Accuracy ◽  
Machine Learning Approach ◽  
Taste Disorders ◽  
Polymerase Chain ◽  
Fold Cross Validation ◽  
Validation Scheme ◽  
Control Study

The COVID-19 outbreak has spread extensively around the world. Loss of smell and taste have emerged as main predictors for COVID-19. The objective of our study is to develop a comprehensive machine learning (ML) modelling framework to assess the predictive value of smell and taste disorders, along with other symptoms, in COVID-19 infection. A multicenter case-control study was performed, in which suspected cases for COVID-19, who were tested by real-time reverse-transcription polymerase chain reaction (RT-PCR), informed about the presence and severity of their symptoms using visual analog scales (VAS). ML algorithms were applied to the collected data to predict a COVID-19 diagnosis using a 50-fold cross-validation scheme by randomly splitting the patients in training (75%) and testing datasets (25%). A total of 777 patients were included. Loss of smell and taste were found to be the symptoms with higher odds ratios of 6.21 and 2.42 for COVID-19 positivity. The ML algorithms applied reached an average accuracy of 80%, a sensitivity of 82%, and a specificity of 78% when using VAS to predict a COVID-19 diagnosis. This study concludes that smell and taste disorders are accurate predictors, with ML algorithms constituting helpful tools for COVID-19 diagnostic prediction.

scholarly journals Machine Learning Model of Dimensionless Numbers to Predict Flow Patterns and Droplet Characteristics for Two-Phase Digital Flows

2021 ◽  
Vol 11 (9) ◽  
pp. 4251
Author(s):  
Jinsong Zhang ◽  
Shuai Zhang ◽  
Jianhua Zhang ◽  
Zhiliang Wang
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Digital Microfluidics ◽  
Flow Patterns ◽  
Machine Learning Algorithms ◽  
Dimensionless Numbers ◽  
Two Phase ◽  
The Difference ◽  
Input Variables ◽  
Digital Microfluidic

In the digital microfluidic experiments, the droplet characteristics and flow patterns are generally identified and predicted by the empirical methods, which are difficult to process a large amount of data mining. In addition, due to the existence of inevitable human invention, the inconsistent judgment standards make the comparison between different experiments cumbersome and almost impossible. In this paper, we tried to use machine learning to build algorithms that could automatically identify, judge, and predict flow patterns and droplet characteristics, so that the empirical judgment was transferred to be an intelligent process. The difference on the usual machine learning algorithms, a generalized variable system was introduced to describe the different geometry configurations of the digital microfluidics. Specifically, Buckingham’s theorem had been adopted to obtain multiple groups of dimensionless numbers as the input variables of machine learning algorithms. Through the verification of the algorithms, the SVM and BPNN algorithms had classified and predicted the different flow patterns and droplet characteristics (the length and frequency) successfully. By comparing with the primitive parameters system, the dimensionless numbers system was superior in the predictive capability. The traditional dimensionless numbers selected for the machine learning algorithms should have physical meanings strongly rather than mathematical meanings. The machine learning algorithms applying the dimensionless numbers had declined the dimensionality of the system and the amount of computation and not lose the information of primitive parameters.

scholarly journals A Self-Adaptive Cuckoo Search Algorithm Using a Machine Learning Technique

Mathematics ◽  
2021 ◽  
Vol 9 (16) ◽  
pp. 1840
Author(s):  
Nicolás Caselli ◽  
Ricardo Soto ◽  
Broderick Crawford ◽  
Sergio Valdivia ◽  
Rodrigo Olivares
Keyword(s):  
Machine Learning ◽  
Optimization Problems ◽  
Search Algorithm ◽  
Cuckoo Search ◽  
Cuckoo Search Algorithm ◽  
Set Covering ◽  
Covering Problem ◽  
Parameter Configuration ◽  
Self Tuning ◽  
Problem Solvers

Metaheuristics are intelligent problem-solvers that have been very efficient in solving huge optimization problems for more than two decades. However, the main drawback of these solvers is the need for problem-dependent and complex parameter setting in order to reach good results. This paper presents a new cuckoo search algorithm able to self-adapt its configuration, particularly its population and the abandon probability. The self-tuning process is governed by using machine learning, where cluster analysis is employed to autonomously and properly compute the number of agents needed at each step of the solving process. The goal is to efficiently explore the space of possible solutions while alleviating human effort in parameter configuration. We illustrate interesting experimental results on the well-known set covering problem, where the proposed approach is able to compete against various state-of-the-art algorithms, achieving better results in one single run versus 20 different configurations. In addition, the result obtained is compared with similar hybrid bio-inspired algorithms illustrating interesting results for this proposal.

scholarly journals Machine Learning-Based Malicious X.509 Certificates’ Detection

2021 ◽  
Vol 11 (5) ◽  
pp. 2164
Author(s):  
Jiaxin Li ◽  
Zhaoxin Zhang ◽  
Changyong Guo
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Ensemble Learning ◽  
Traffic Analysis ◽  
Learning Models ◽  
Detection Model ◽  
Analysis Tools ◽  
Average Accuracy ◽  
Machine Learning Models

X.509 certificates play an important role in encrypting the transmission of data on both sides under HTTPS. With the popularization of X.509 certificates, more and more criminals leverage certificates to prevent their communications from being exposed by malicious traffic analysis tools. Phishing sites and malware are good examples. Those X.509 certificates found in phishing sites or malware are called malicious X.509 certificates. This paper applies different machine learning models, including classical machine learning models, ensemble learning models, and deep learning models, to distinguish between malicious certificates and benign certificates with Verification for Extraction (VFE). The VFE is a system we design and implement for obtaining plentiful characteristics of certificates. The result shows that ensemble learning models are the most stable and efficient models with an average accuracy of 95.9%, which outperforms many previous works. In addition, we obtain an SVM-based detection model with an accuracy of 98.2%, which is the highest accuracy. The outcome indicates the VFE is capable of capturing essential and crucial characteristics of malicious X.509 certificates.

scholarly journals Data mining of coronavirus: SARS-CoV-2, SARS-CoV and MERS-CoV

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Jung Eun Huh ◽  
Seunghee Han ◽  
Taeseon Yoon
Keyword(s):  
Machine Learning ◽  
Amino Acid ◽  
Amino Acid Sequence ◽  
Decision Tree ◽  
Machine Learning Algorithms ◽  
High Similarity ◽  
Incubation Periods ◽  
Initial Question ◽  
The Difference ◽  
Blast Program

Abstract Objective In this study we compare the amino acid and codon sequence of SARS-CoV-2, SARS-CoV and MERS-CoV using different statistics programs to understand their characteristics. Specifically, we are interested in how differences in the amino acid and codon sequence can lead to different incubation periods and outbreak periods. Our initial question was to compare SARS-CoV-2 to different viruses in the coronavirus family using BLAST program of NCBI and machine learning algorithms. Results The result of experiments using BLAST, Apriori and Decision Tree has shown that SARS-CoV-2 had high similarity with SARS-CoV while having comparably low similarity with MERS-CoV. We decided to compare the codons of SARS-CoV-2 and MERS-CoV to see the difference. Though the viruses are very alike according to BLAST and Apriori experiments, SVM proved that they can be effectively classified using non-linear kernels. Decision Tree experiment proved several remarkable properties of SARS-CoV-2 amino acid sequence that cannot be found in MERS-CoV amino acid sequence. The consequential purpose of this paper is to minimize the damage on humanity from SARS-CoV-2. Hence, further studies can be focused on the comparison of SARS-CoV-2 virus with other viruses that also can be transmitted during latent periods.

scholarly journals A Machine Learning Approach For Classifying Low-mass X-ray Binaries Based On Their Compact Object Nature

2020 ◽  
Author(s):  
R Pattnaik ◽  
K Sharma ◽  
K Alabarta ◽  
D Altamirano ◽  
M Chakraborty ◽  
...  
Keyword(s):  
Machine Learning ◽  
Black Hole ◽  
Neutron Star ◽  
Binary Systems ◽  
Compact Object ◽  
X Ray ◽  
Average Accuracy ◽  
Machine Learning Approach ◽  
Low Mass ◽  
X Ray Binaries

Abstract Low Mass X-ray binaries (LMXBs) are binary systems where one of the components is either a black hole or a neutron star and the other is a less massive star. It is challenging to unambiguously determine whether a LMXB hosts a black hole or a neutron star. In the last few decades, multiple observational works have tried, with different levels of success, to address this problem. In this paper, we explore the use of machine learning to tackle this observational challenge. We train a random forest classifier to identify the type of compact object using the energy spectrum in the energy range 5-25 keV obtained from the Rossi X-ray Timing Explorer archive. We report an average accuracy of 87±13% in classifying the spectra of LMXB sources. We further use the trained model for predicting the classes for LMXB systems with unknown or ambiguous classification. With the ever-increasing volume of astronomical data in the X-ray domain from present and upcoming missions (e.g., SWIFT, XMM-Newton, XARM, ATHENA, NICER), such methods can be extremely useful for faster and robust classification of X-ray sources and can also be deployed as part of the data reduction pipeline.

Sign in / Sign up

Export Citation Format

Share Document