scholarly journals Comparison of Analytical Methods for Determining Methylesterification and Acetylation of Pectin

2021 ◽  
Vol 11 (10) ◽  
pp. 4461
Author(s):  
Yang Yu ◽  
Yuwen Wang ◽  
Xianbin Liu ◽  
Ying Liu ◽  
Li Ji ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Structural Analysis ◽  
Galacturonic Acid ◽  
Hplc Analysis ◽  
The Other ◽  
Sample Treatment ◽  
Citrus Pectin ◽  
Experimental Conditions ◽  
Ft Ir ◽  
Comparison Of Analytical Methods

The esterification of galacturonic acid with methanol and/or acetic acid is important for the structural analysis of pectin. Although several methods have been reported for determining the degree of methylesterification (DM) and acetylation (DAc), the present study compares and optimizes three methods (titration, FT-IR and HPLC) using commercial citrus pectin (CP). Our results showed that the DM of CP was 47.0%, 47.6% and 48.0% as determined by titration, FT-IR and HPLC, respectively, suggesting that DM determination is nearly identical using any of these methods. However, the titration approach requires more sample than the other two. HPLC showed that the DAc of CP was 1.6%, an approach that can be used to determine the DM and DAc of pectin simultaneously. Here, we simplified and optimized sample treatment for HPLC analysis and compared it with the reported literature. Our results provide useful information for choosing appropriate methods for determining the DM and DAc of pectin based on various sample properties and experimental conditions.

scholarly journals Optimization of Pectin Enzymatic Extraction from Malus domestica ‘Fălticeni’ Apple Pomace with Celluclast 1.5L

Molecules ◽  
2019 ◽  
Vol 24 (11) ◽  
pp. 2158 ◽  
Author(s):  
Florina Dranca ◽  
Mircea Oroian
Keyword(s):  
Malus Domestica ◽  
Acid Content ◽  
Galacturonic Acid ◽  
Extraction Yield ◽  
Citrus Pectin ◽  
Box Behnken Design ◽  
Degree Of Esterification ◽  
Ft Ir ◽  
Ir Analysis ◽  
Optimum Extraction

Pectin was extracted from apple (Malus domestica ‘Fălticeni’) pomace with Celluclast 1.5L, at doses of 20, 40, and 60 µL/g of material. The temperature and time of extraction were varied on three levels—temperature—40, 50, and 60 °C; time—12, 18, and 24 h. For each experiment, the extraction yield (R2 = 0.8905), the galacturonic acid content (R2 = 0.9866), and the degree of esterification (R2 = 0.9520) of pectin was determined. Response surface methodology (RSM) was implemented via a Box–Behnken design, to optimize pectin extraction. In the optimum extraction conditions (temperature of 48.3 °C, extraction time of 18 h 14 min, and enzyme dose of 42.5 µL/g of pomace), the design predicted a 6.76% yield with a galacturonic acid content of 97.46 g/100 g of pectin and a degree of esterification of 96.02%. FT-IR analysis of the pectin sample obtained in these conditions showed a chemical structure similar to that of commercial apple and citrus pectin.

scholarly journals Quantification of Lovastatin Produced by Monascus purpureus

2015 ◽  
Vol 9 (1) ◽  
pp. 6-13 ◽  
Author(s):  
A. Seenivasan ◽  
Sathyanarayana N. Gummadi ◽  
Tapobrata Panda ◽  
Thomas Théodore
Keyword(s):  
Absorption Spectrum ◽  
Spectrophotometric Method ◽  
Hplc Analysis ◽  
Fermentation Broth ◽  
The Other ◽  
Monascus Purpureus ◽  
Interesting Problem ◽  
Experimental Conditions ◽  
Novel Method ◽  
Uv Visible

Development of a novel method for the quantification of lovastatin is an interesting problem in the analytical field. In the literature, many reports use spectrophotometric method for the quantification of lovastatin. However, the analysis of fermentation broth containing lovastatin appears to be inaccurate using spectrophotometric method. Hence, the estimation of lovastatin produced by Monascus purpureus and pure lovastatin was attempted by UV-visible spectrophotometer as well as HPLC. It was observed that the analogues and/or intermediates of lovastatin synthesized in the fermentation broth and the products of fermentation caused superimposition effect on the absorption spectrum. Phosphate is a medium constituent for the production of lovastatin by the organism which contributed significantly to the superimposition of absorption spectrum. On the other hand, HPLC analysis consistently gave reliable results for the estimation of lovastatin under all the experimental conditions studied.

Study on the Preparation of WO3/TiO2 Composite Photocatalyst and its Photocatalytic Activity

2014 ◽  
Vol 540 ◽  
pp. 60-63
Author(s):  
Tian E Su ◽  
Chao Lin Miao
Keyword(s):  
Acetic Acid ◽  
Photocatalytic Activity ◽  
Sol Gel ◽  
Tetrabutyl Titanate ◽  
Gel Point ◽  
Doping Amount ◽  
Experimental Conditions ◽  
Composite Photocatalyst ◽  
Infrared Spectrometer ◽  
Ft Ir

WO3/TiO2 composite photocatalyst was prepared from tetrabutyl titanate, ammonium tungstate by sol-gel method. The influence of acetic acid and ethanol on the gel point time, and the influence of doping amount of W on the photocatalytic activity was studied. The properties of powders were characterized by Fourier transform infrared spectrometer(FT-IR), and the photocatalytic activity was characterized by probe reaction of methyl orange degradation. The results show that the homogeneous transparent precursor is prepared at the amount of acetic acid =1mL and the amount of ethanol =10mL.When the doping amount of W reached to 0.12%, the best photocatalysis efficiency was obtained. Under the experimental conditions, the infrared absorption band of the W－O was not observed.

Structuralism as a Pamphlet (On the Book by E. Reinert “How Rich CountriesGot Rich... And Why Poor Countries Stay Poor”. 2nd ed.)

2014 ◽  
pp. 147-153
Author(s):  
P. Orekhovsky
Keyword(s):  
Economic Theory ◽  
Economic Development ◽  
Structural Analysis ◽  
Increasing Returns ◽  
The Other ◽  
Static Theory ◽  
Poor Countries ◽  
Historical School ◽  
Socio Economic Development ◽  
The Relationship

The review outlines the connection between E. Reinert’s book and the tradition of structural analysis. The latter allows for the heterogeneity of industries and sectors of the economy, as well as for the effects of increasing and decreasing returns. Unlike the static theory of international trade inherited from the Ricardian analysis of comparative advantage, this approach helps identify the relationship between trade, production, income and population growth. Reinert rehabilitates the “other canon” of economic theory associated with the mercantilist tradition, F. Liszt and the German historical school, as well as a reconside ration of A. Marshall’s analysis of increasing returns. Empirical illustrations given in the book reveal clear parallels with the path of Russian socio-economic development in the last twenty years.

scholarly journals Biofoam of Spittlebug, Poophilus costalis (Walker): Preferential Sites, Temperature Regulation, Chemical Composition and Antimicrobial Activity

Insects ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 340
Author(s):  
Kitherian Sahayaraj ◽  
Balakrishnan Saranya ◽  
Samy Sayed ◽  
Loko Yêyinou Laura Estelle ◽  
Koilraj Madasamy
Keyword(s):  
Antimicrobial Activity ◽  
Chemical Composition ◽  
High Performance ◽  
Host Plants ◽  
Ground Level ◽  
College Campus ◽  
The Other ◽  
Mimosa Pudica ◽  
Ft Ir ◽  
Gas Chromatography Mass Spectroscopy

The foam produced by nymphs of Poophilus costalis on eleven different host plants belonging to eight families on St. Xavier’s College campus in India was studied over five months. The chemical composition and antimicrobial activity of these biofoams were investigated. The results revealed that P. costalis preferred Theporsia purpurea and Mimosa pudica for laying their eggs and producing foam, over the other tested plants. P. costalis produce their foam on either nodes or internodes on monocotyledons (30%) (p < 0.05), whereas on dicotyledons, they produce more foam on the stems (63.8%) than on the leaves (6.2%) (p < 0.01). The number of nymphs in each piece of foam from P. costalis varied from 1 to 3 (mean = 1.8 per plant). They produced their foam (5.7 to 45.2 cm) from the ground level on a plant. The length and breadth of a piece of foam ranged from 1.0 to 3.9 cm and 0.6 to 4.7 cm, respectively. The foam tended to be cooler than the environment. Qualitative profiling showed that the foam consists of carbohydrates, including maltose; trypsin; amino acids; protease. The foam was also analyzed using a spectrophotometer, Fourier transform infrared spectroscopy (FT-IR), gas chromatography–mass spectroscopy (GC-MS), and high-performance liquid chromatography (HPLC). The antimicrobial activity of the biofoam was the greatest against Staphylococcus aureus, the growth of which was reduced by 55.9 ± 3.9%, suggesting that the foam could be used as an antimicrobial product. However, no activities were observed against Fusarium oxysporum and Candida albicans.

scholarly journals Synthesis of spiro[dihydropyridine-oxindoles] via three-component reaction of arylamine, isatin and cyclopentane-1,3-dione

2013 ◽  
Vol 9 ◽  
pp. 8-14 ◽  
Author(s):  
Yan Sun ◽  
Jing Sun ◽  
Chao-Guo Yan
Keyword(s):  
Acetic Acid ◽  
Reaction Mechanism ◽  
Room Temperature ◽  
The Other ◽  
Other Hand ◽  
Three Component Reaction ◽  
High Yields

A fast and convenient protocol for the synthesis of novel spiro[dihydropyridine-oxindole] derivatives in satisfactory yields was developed by the three-component reactions of arylamine, isatin and cyclopentane-1,3-dione in acetic acid at room temperature. On the other hand the condensation of isatin with two equivalents of cyclopentane-1,3-dione gave 3,3-bis(2-hydroxy-5-oxo-cyclopent-1-enyl)oxindole in high yields. The reaction mechanism and substrate scope of this novel reaction is briefly discussed.

Intercalation Processes in Cobalt Substituted Nickel Oxyhydroxides

1990 ◽  
Vol 210 ◽  
Author(s):  
Claude Delmas
Keyword(s):  
Ir Spectroscopy ◽  
Mechanical Treatment ◽  
Positive Charge ◽  
Van Der Waals ◽  
The Other ◽  
Hydrolysis Reaction ◽  
Water Molecules ◽  
Layered Oxides ◽  
Experimental Conditions ◽  
Cobalt Ions

AbstractChimie douce reactions (hydrolysis and reduction) from layered oxides : NaNiO2, NaxCoO2 and NaNil-xCoxO2 lead to numerous oxyhydroxides and hydroxides which differ by the composition of the intersheet space.According to the experimental conditions of the hydrolysis reaction, the oxyhydroxides can be unhydrated or intercalated with one or two layers of water molecules. From the most hydrated phases, the other ones can be obtained by chemical, thermal and even mechanical treatment.The reduction of Co-substituted nickel oxyhydroxides leads to hydroxides in which nickel and cobalt ions are respectively divalent and trivalent. In order to compensate the excess of positive charge in the (Ni, Co)O2 sheet, anions (OH-, CO32-, SO42-, NO3-) are inserted in the Van der Waals gap.For the highest anion amounts, well ordered α*-type materials are obtained. Water molecules are simultaneously inserted in the interslab space. Their structure is strongly related to the hydrotalcite one. When the amouit of anions in the intersheet space is not sufficient, interstratified materials are obtained. In this case the (Ni,Co)(OH)2 slabs are separated by a layer of CO32- anions and water molecules (α*-type) or by an empty Van der Waals gap (β(II)-type). The amount of α*-type planes in the structure increases with the cobalt amount. All these materials have been characterized by IR spectroscopy which allows to detect the existence of two types of O-H bonds (free in α*-type plane or hydrogen bonded in ²(II)-type plane).

Preparations, sulphinate coordination, and thermal decomposition of some bismuth triarenesulphinates

1972 ◽  
Vol 25 (10) ◽  
pp. 2107 ◽  
Author(s):  
GB Deacon ◽  
GD Fallon
Keyword(s):  
Thermal Decomposition ◽  
Acetic Acid ◽  
Sulphur Dioxide ◽  
Glacial Acetic Acid ◽  
The Other

Bismuth triarenesulphinates, Bi(02SR)3 [R = Ph, p-MeC6H4, p-ClC6H4, 2,4,6-(Me2CH)3C6H2, and p-MeCONHC6H4], have been prepared by reaction of bismuth triacetate with the appropriate arenesulphinio acids in glacial acetic acid, and the first two compounds have also been obtained by reaction of triphenyl-bismuth with the appropriate mercuric arenesulphinates. The sulphur-oxygen stretching frequencies of the bismuth sulphinates are indicative of O-sulphinate coordination, and the compounds are considered to be polymeric with bridging O-sulphinate groups and six-coordinate bismuth. Thermal decomposition of Bi(O2SR)3 (R = Ph, p-MeC6H4, or p-CIC6H4) under vacuum gave the corresponding triarylbismuth compounds and sulphur dioxide, the preparation of tri-p-chlorophenylbismuth being accompanied by formation of di-p-chlorophenyl sulphone and S-p-chlorophenyl p-chlorobenzenethiosulphonate. Pyrolysis of the other triarenesulphinates did not yield organobismuth compounds.

Clay Intercalated PVA-Nafion Bipolymer Matrix as Proton Conducting Nanocomposite Membrane for PEM Fuel Cells

2014 ◽  
Vol 807 ◽  
pp. 161-168
Author(s):  
B. Narayanamoorthy ◽  
B. Dineshkumar ◽  
S. Balaji
Keyword(s):  
Sol Gel ◽  
Composite Membranes ◽  
Pem Fuel Cells ◽  
The Other ◽  
Hybrid Nanocomposite ◽  
Nanocomposite Membranes ◽  
Free Standing ◽  
Ft Ir ◽  
Clay Materials ◽  
Sem Analyses

The amino functionalized magnesium phyllosilicate clay (AC) intercalated over PVA-Nafion hybrid nanocomposite membranes were prepared by sol-gel method. The free standing membranes were obtained by solution recasting. The composition of clay materials such as AC and montmorillonite (MMT) was varied between 2-10 wt.% with respect to PVA-Nafion content. The molecular interactions and surface morphology of nanocomposite membranes were investigated by FT-IR and SEM analyses respectively. The thermal and mechanical stabilities of nanocomposite membranes were studied using TGA and Nanoindentation techniques. For 6 wt. % AC/PVA-Nafion, TGA results showed no appreciable mass change up to 380 °C and hardness calculated from nanoindentation studies was nearly 30 % higher than the other compositions. An improved conductivity was obtained for 6 wt. % AC/PVA-Nafion (1.4×10-2 S/cm) compared to pure Nafion (1.2×10-2 S/cm) and PVA-Nafion and MMT/PVA-Nafion composite membranes. From these studies, we observed that 6 wt. % AC/PVA-Nafion membrane possessed a good conductivity with higher thermal and mechanical stabilities.

Changes in protein spectra of bean seed during germination

1970 ◽  
Vol 48 (7) ◽  
pp. 1347-1350 ◽  
Author(s):  
Pei-Show Juo ◽  
G. Stotzky
Keyword(s):  
Acetic Acid ◽  
Phaseolus Vulgaris ◽  
Basic Protein ◽  
The Other ◽  
Globulin Fraction ◽  
Bean Seed ◽  
Basic Proteins ◽  
Number Of Components ◽  
Red Kidney Bean ◽  
Protein Spectra

Globulins, albumins, and basic proteins were extracted from seeds of red kidney bean (Phaseolus vulgaris), and their distribution was in a ratio of about 3:2:1, respectively. The globulin fraction constituted a major portion of the reserve proteins and was hydrolyzed rapidly during germination. More than 90% of the basic proteins, extractable with 0.05 N acetic acid, disappeared 12 days after germination. Although the decrease in total albumin was not as marked as with the other two fractions, a number of components of this fraction disappeared during the early stages of germination, but several new components were detected about 8 days after germination. The apparent synthesis of new globulin components during germination was also observed, but no synthesis of basic protein could be detected.

Sign in / Sign up

Export Citation Format

Share Document