scholarly journals Ceramic Cracks Segmentation with Deep Learning

2021 ◽  
Vol 11 (13) ◽  
pp. 6017
Author(s):  
Gerivan Santos Junior ◽  
Janderson Ferreira ◽  
Cristian Millán-Arias ◽  
Ramiro Daniel ◽  
Alberto Casado Junior ◽  
...  
Keyword(s):  
Deep Learning ◽  
Ceramic Plate ◽  
Ceramic Tiles ◽  
Entire Area ◽  
Manual Inspection ◽  
Optical Inspection ◽  
Proposed Model ◽  
Processing Step ◽  
Long Time ◽  
Automated Optical Inspection

Cracks are pathologies whose appearance in ceramic tiles can cause various damages due to the coating system losing water tightness and impermeability functions. Besides, the detachment of a ceramic plate, exposing the building structure, can still reach people who move around the building. Manual inspection is the most common method for addressing this problem. However, it depends on the knowledge and experience of those who perform the analysis and demands a long time and a high cost to map the entire area. This work focuses on automated optical inspection to find faults in ceramic tiles performing the segmentation of cracks in ceramic images using deep learning to segment these defects. We propose an architecture for segmenting cracks in facades with Deep Learning that includes an image pre-processing step. We also propose the Ceramic Crack Database, a set of images to segment defects in ceramic tiles. The proposed model can adequately identify the crack even when it is close to or within the grout.

scholarly journals An End-to-End Deep Fusion Model for Mapping Forests at Tree Species Levels with High Spatial Resolution Satellite Imagery

2020 ◽  
Vol 12 (20) ◽  
pp. 3324
Author(s):  
Ying Guo ◽  
Zengyuan Li ◽  
Erxue Chen ◽  
Xu Zhang ◽  
Lei Zhao ◽  
...  
Keyword(s):  
Deep Learning ◽  
Tree Species ◽  
High Spatial Resolution ◽  
Kappa Coefficient ◽  
Species Level ◽  
Forest Types ◽  
Remote Sensing Images ◽  
Proposed Model ◽  
Processing Step ◽  
Forest Farm

Mapping the distribution of forest resources at tree species levels is important due to their strong association with many quantitative and qualitative indicators. With the ongoing development of artificial intelligence technologies, the effectiveness of deep-learning classification models for high spatial resolution (HSR) remote sensing images has been proved. However, due to the poor statistical separability and complex scenarios, it is still challenging to realize fully automated and highly accurate forest types at tree species level mapping. To solve the problem, a novel end-to-end deep learning fusion method for HSR remote sensing images was developed by combining the advantageous properties of multi-modality representations and the powerful features of post-processing step to optimize the forest classification performance refined to the dominant tree species level in an automated way. The structure of the proposed model consisted of a two-branch fully convolutional network (dual-FCN8s) and a conditional random field as recurrent neural network (CRFasRNN), which named dual-FCN8s-CRFasRNN in the paper. By constructing a dual-FCN8s network, the dual-FCN8s-CRFasRNN extracted and fused multi-modality features to recover a high-resolution and strong semantic feature representation. By imbedding the CRFasRNN module into the network as post-processing step, the dual-FCN8s-CRFasRNN optimized the classification result in an automatic manner and generated the result with explicit category information. Quantitative evaluations on China’s Gaofen-2 (GF-2) HSR satellite data showed that the dual-FCN8s-CRFasRNN provided a competitive performance with an overall classification accuracy (OA) of 90.10%, a Kappa coefficient of 0.8872 in the Wangyedian forest farm, and an OA of 74.39%, a Kappa coefficient of 0.6973 in the GaoFeng forest farm, respectively. Experiment results also showed that the proposed model got higher OA and Kappa coefficient metrics than other four recently developed deep learning methods and achieved a better trade-off between automaticity and accuracy, which further confirmed the applicability and superiority of the dual-FCN8s-CRFasRNN in forest types at tree species level mapping tasks.

A Deep Learning based Arabic Script Recognition System: Benchmark on KHAT

2020 ◽  
Vol 17 (3) ◽  
pp. 299-305 ◽  
Author(s):  
Riaz Ahmad ◽  
Saeeda Naz ◽  
Muhammad Afzal ◽  
Sheikh Rashid ◽  
Marcus Liwicki ◽  
...  
Keyword(s):  
Deep Learning ◽  
Character Recognition ◽  
Data Augmentation ◽  
Short Term Memory ◽  
Recognition System ◽  
Learning Approach ◽  
Arabic Text ◽  
Data Set ◽  
Processing Step ◽  
Handwritten Arabic

This paper presents a deep learning benchmark on a complex dataset known as KFUPM Handwritten Arabic TexT (KHATT). The KHATT data-set consists of complex patterns of handwritten Arabic text-lines. This paper contributes mainly in three aspects i.e., (1) pre-processing, (2) deep learning based approach, and (3) data-augmentation. The pre-processing step includes pruning of white extra spaces plus de-skewing the skewed text-lines. We deploy a deep learning approach based on Multi-Dimensional Long Short-Term Memory (MDLSTM) networks and Connectionist Temporal Classification (CTC). The MDLSTM has the advantage of scanning the Arabic text-lines in all directions (horizontal and vertical) to cover dots, diacritics, strokes and fine inflammation. The data-augmentation with a deep learning approach proves to achieve better and promising improvement in results by gaining 80.02% Character Recognition (CR) over 75.08% as baseline.

Human Activity Recognition using Fourier Transform Inspired Deep Learning Combination Model

2019 ◽  
Vol 9 (1) ◽  
pp. 16-31
Author(s):  
Kyungkoo Jun
Keyword(s):  
Fourier Transform ◽  
Deep Learning ◽  
Short Term Memory ◽  
Window Size ◽  
Sensor Data ◽  
Data Sets ◽  
Data Set ◽  
Proposed Model ◽  
Testing Data ◽  
Labeling Scheme

Background & Objective: This paper proposes a Fourier transform inspired method to classify human activities from time series sensor data. Methods: Our method begins by decomposing 1D input signal into 2D patterns, which is motivated by the Fourier conversion. The decomposition is helped by Long Short-Term Memory (LSTM) which captures the temporal dependency from the signal and then produces encoded sequences. The sequences, once arranged into the 2D array, can represent the fingerprints of the signals. The benefit of such transformation is that we can exploit the recent advances of the deep learning models for the image classification such as Convolutional Neural Network (CNN). Results: The proposed model, as a result, is the combination of LSTM and CNN. We evaluate the model over two data sets. For the first data set, which is more standardized than the other, our model outperforms previous works or at least equal. In the case of the second data set, we devise the schemes to generate training and testing data by changing the parameters of the window size, the sliding size, and the labeling scheme. Conclusion: The evaluation results show that the accuracy is over 95% for some cases. We also analyze the effect of the parameters on the performance.

Multi Disease-Prediction Framework Using Hybrid Deep Learning: An Optimal Prediction Model (Preprint)

2020 ◽  
Author(s):  
Anusha Ampavathi ◽  
Vijaya Saradhi T
Keyword(s):  
Feature Extraction ◽  
Big Data ◽  
Deep Learning ◽  
Weight Function ◽  
Optimization Algorithm ◽  
Large Scale ◽  
Heuristic Algorithms ◽  
Disease Prediction ◽  
Health Care Decisions ◽  
Proposed Model

UNSTRUCTURED Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient’s symptoms. For several medical organizations, disease prediction is important for making the best feasible health care decisions. Conversely, the conventional medical care model offers input as structured that requires more accurate and consistent prediction. This paper is planned to develop the multi-disease prediction using the improvised deep learning concept. Here, the different datasets pertain to “Diabetes, Hepatitis, lung cancer, liver tumor, heart disease, Parkinson’s disease, and Alzheimer’s disease”, from the benchmark UCI repository is gathered for conducting the experiment. The proposed model involves three phases (a) Data normalization (b) Weighted normalized feature extraction, and (c) prediction. Initially, the dataset is normalized in order to make the attribute's range at a certain level. Further, weighted feature extraction is performed, in which a weight function is multiplied with each attribute value for making large scale deviation. Here, the weight function is optimized using the combination of two meta-heuristic algorithms termed as Jaya Algorithm-based Multi-Verse Optimization algorithm (JA-MVO). The optimally extracted features are subjected to the hybrid deep learning algorithms like “Deep Belief Network (DBN) and Recurrent Neural Network (RNN)”. As a modification to hybrid deep learning architecture, the weight of both DBN and RNN is optimized using the same hybrid optimization algorithm. Further, the comparative evaluation of the proposed prediction over the existing models certifies its effectiveness through various performance measures.

scholarly journals An Investigation into the Application of Deep Learning in the Detection and Mitigation of DDOS Attack on SDN Controllers

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 14
Author(s):  
James Dzisi Gadze ◽  
Akua Acheampomaa Bamfo-Asante ◽  
Justice Owusu Agyemang ◽  
Henry Nunoo-Mensah ◽  
Kwasi Adu-Boahen Opare
Keyword(s):  
Deep Learning ◽  
Network Architecture ◽  
Learning Algorithm ◽  
Single Point ◽  
Denial Of Service ◽  
Specific Work ◽  
Learning Models ◽  
Ddos Attack ◽  
Deep Learning Algorithm ◽  
Proposed Model

Software-Defined Networking (SDN) is a new paradigm that revolutionizes the idea of a software-driven network through the separation of control and data planes. It addresses the problems of traditional network architecture. Nevertheless, this brilliant architecture is exposed to several security threats, e.g., the distributed denial of service (DDoS) attack, which is hard to contain in such software-based networks. The concept of a centralized controller in SDN makes it a single point of attack as well as a single point of failure. In this paper, deep learning-based models, long-short term memory (LSTM) and convolutional neural network (CNN), are investigated. It illustrates their possibility and efficiency in being used in detecting and mitigating DDoS attack. The paper focuses on TCP, UDP, and ICMP flood attacks that target the controller. The performance of the models was evaluated based on the accuracy, recall, and true negative rate. We compared the performance of the deep learning models with classical machine learning models. We further provide details on the time taken to detect and mitigate the attack. Our results show that RNN LSTM is a viable deep learning algorithm that can be applied in the detection and mitigation of DDoS in the SDN controller. Our proposed model produced an accuracy of 89.63%, which outperformed linear-based models such as SVM (86.85%) and Naive Bayes (82.61%). Although KNN, which is a linear-based model, outperformed our proposed model (achieving an accuracy of 99.4%), our proposed model provides a good trade-off between precision and recall, which makes it suitable for DDoS classification. In addition, it was realized that the split ratio of the training and testing datasets can give different results in the performance of a deep learning algorithm used in a specific work. The model achieved the best performance when a split of 70/30 was used in comparison to 80/20 and 60/40 split ratios.

scholarly journals LiDAR Point Cloud Recognition and Visualization with Deep Learning for Overhead Contact Inspection

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6387 ◽  
Author(s):  
Xiaohan Tu ◽  
Cheng Xu ◽  
Siping Liu ◽  
Shuai Lin ◽  
Lipei Chen ◽  
...  
Keyword(s):  
Deep Learning ◽  
Computational Complexity ◽  
Point Cloud ◽  
High Speed ◽  
Point Cloud Data ◽  
Embedded Devices ◽  
Cloud Data ◽  
Manual Inspection ◽  
Order Of Magnitude ◽  
Supply Systems

As overhead contact (OC) is an essential part of power supply systems in high-speed railways, it is necessary to regularly inspect and repair abnormal OC components. Relative to manual inspection, applying LiDAR (light detection and ranging) to OC inspection can improve efficiency, accuracy, and safety, but it faces challenges to efficiently and effectively segment LiDAR point cloud data and identify catenary components. Recent deep learning-based recognition methods are rarely employed to recognize OC components, because they have high computational complexity, while their accuracy needs to be improved. To track these problems, we first propose a lightweight model, RobotNet, with depthwise and pointwise convolutions and an attention module to recognize the point cloud. Second, we optimize RobotNet to accelerate its recognition speed on embedded devices using an existing compilation tool. Third, we design software to facilitate the visualization of point cloud data. Our software can not only display a large amount of point cloud data, but also visualize the details of OC components. Extensive experiments demonstrate that RobotNet recognizes OC components more accurately and efficiently than others. The inference speed of the optimized RobotNet increases by an order of magnitude. RobotNet has lower computational complexity than other studies. The visualization results also show that our recognition method is effective.

Automated Image Denoising Model: Contribution Towards Optimized Internal and External Basis

2021 ◽  
pp. 2150051
Author(s):  
S. Elavaar Kuzhali ◽  
D. S. Suresh
Keyword(s):  
Image Denoising ◽  
Image Patch ◽  
The Past ◽  
Local Means ◽  
Hybrid Optimization Algorithm ◽  
Proposed Model ◽  
Processing Step ◽  
Non Local ◽  
Chicken Swarm Optimization ◽  
Selection Of

For handling digital images for various applications, image denoising is considered as a fundamental pre-processing step. Diverse image denoising algorithms have been introduced in the past few decades. The main intent of this proposal is to develop an effective image denoising model on the basis of internal and external patches. This model adopts Non-local means (NLM) for performing the denoising, which uses redundant information of the image in pixel or spatial domain to reduce the noise. While performing the image denoising using NLM, “denoising an image patch using the other noisy patches within the noisy image is done for internal denoising and denoising a patch using the external clean natural patches is done for external denoising”. Here, the selection of optimal block from the entire datasets including internal noisy images and external clean natural images is decided by a new hybrid optimization algorithm. The two renowned optimization algorithms Chicken Swarm Optimization (CSO), and Dragon Fly Algorithm (DA) are merged, and the new hybrid algorithm Rooster-based Levy Updated DA (RLU-DA) is adopted. The experimental results in terms of some relevant performance measures show the promising results of the proposed model with remarkable stability and high accuracy.

scholarly journals A Hybrid Optimized LSTM Models for Human Activity Recognition with IOT Devices

2021 ◽  
pp. 182-189
Author(s):  
S. Arokiaraj ◽  
Dr. N. Viswanathan
Keyword(s):  
Deep Learning ◽  
Internet Of Things ◽  
Short Term Memory ◽  
The Other ◽  
Learning Models ◽  
Computational Overhead ◽  
Temporal Features ◽  
Human Movements ◽  
Proposed Model ◽  
Iot Devices

With the advent of Internet of things(IoT),HA (HA) recognition has contributed the more application in health care in terms of diagnosis and Clinical process. These devices must be aware of human movements to provide better aid in the clinical applications as well as user’s daily activity.Also , In addition to machine and deep learning algorithms, HA recognition systems has significantly improved in terms of high accurate recognition. However, the most of the existing models designed needs improvisation in terms of accuracy and computational overhead. In this research paper, we proposed a BAT optimized Long Short term Memory (BAT-LSTM) for an effective recognition of human activities using real time IoT systems. The data are collected by implanting the Internet of things) devices invasively. Then, proposed BAT-LSTM is deployed to extract the temporal features which are then used for classification to HA. Nearly 10,0000 dataset were collected and used for evaluating the proposed model. For the validation of proposed framework, accuracy, precision, recall, specificity and F1-score parameters are chosen and comparison is done with the other state-of-art deep learning models. The finding shows the proposed model outperforms the other learning models and finds its suitability for the HA recognition.

scholarly journals Plant Disease Identification Using Shallow Convolutional Neural Network

Agronomy ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2388
Author(s):  
Sk Mahmudul Hassan ◽  
Michal Jasinski ◽  
Zbigniew Leonowicz ◽  
Elzbieta Jasinska ◽  
Arnab Kumar Maji
Keyword(s):  
Deep Learning ◽  
Late Blight ◽  
Early Blight ◽  
Gray Leaf Spot ◽  
Plant Diseases ◽  
Automated Identification ◽  
Average Accuracy ◽  
Proposed Model ◽  
Effective Manner ◽  
Tomato Diseases

Various plant diseases are major threats to agriculture. For timely control of different plant diseases in effective manner, automated identification of diseases are highly beneficial. So far, different techniques have been used to identify the diseases in plants. Deep learning is among the most widely used techniques in recent times due to its impressive results. In this work, we have proposed two methods namely shallow VGG with RF and shallow VGG with Xgboost to identify the diseases. The proposed model is compared with other hand-crafted and deep learning-based approaches. The experiments are carried on three different plants namely corn, potato, and tomato. The considered diseases in corns are Blight, Common rust, and Gray leaf spot, diseases in potatoes are early blight and late blight, and tomato diseases are bacterial spot, early blight, and late blight. The result shows that our implemented shallow VGG with Xgboost model outperforms different deep learning models in terms of accuracy, precision, recall, f1-score, and specificity. Shallow Visual Geometric Group (VGG) with Xgboost gives the highest accuracy rate of 94.47% in corn, 98.74% in potato, and 93.91% in the tomato dataset. The models are also tested with field images of potato, corn, and tomato. Even in field image the average accuracy obtained using shallow VGG with Xgboost are 94.22%, 97.36%, and 93.14%, respectively.

Sign in / Sign up

Export Citation Format

Share Document