scholarly journals Study of Two Constraints Impacting Measurements of Human Glycemia Using a Microwave Sensor

Biosensors ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 83
Author(s):  
Mohamed Amine Zidane ◽  
Hichem Amar ◽  
Amar Rouane
Keyword(s):  
Specific Absorption Rate ◽  
Comsol Multiphysics ◽  
Second Phase ◽  
Tissue Heterogeneity ◽  
Tissue Model ◽  
Safety Standards ◽  
User Simulation ◽  
Microwave Sensor ◽  
The Impact ◽  
Good Agreement

The measurement of glycemia is impacted by several constraints; those constraints have to be identified and quantified when designing an electromagnetic noninvasive sensor. The second phase concerns the level of the influence of these constraints. In this work, we investigated the impact of vein radius located in the forearm on a resonant microwave sensor to measure glycemia. We performed a numerical simulation using COMSOL Multiphysics of a proposed tissue model that was in contact with a microwave resonator. Some other factors affect the measurement, such as temperature, perfusion, sensor positioning and motion, tissue heterogeneity, and other biological activity. The sensor must be robust to the above-mentioned constraints. Because vein size changes from one person to another, the dielectric properties seen by the sensor will be different. This has been demonstrated by the change created in the resonance frequency of the simulated sensor for different vein sizes. The second constraint that was assessed is the dosimetry. The specific absorption rate (SAR) of any electromagnetic device should be evaluated and compared with SAR limits in the safety standards to ensure the safety of the user. Simulation results are in good agreement with SAR limits in the safety standards.

Modeling of Tread Block Contact Mechanics Using Linear Viscoelastic Theory3

2008 ◽  
Vol 36 (3) ◽  
pp. 211-226 ◽  
Author(s):  
F. Liu ◽  
M. P. F. Sutcliffe ◽  
W. R. Graham
Keyword(s):  
High Speed ◽  
Slip Rate ◽  
Material Model ◽  
Contact Forces ◽  
Block Modeling ◽  
Rate Dependent ◽  
Linear Viscoelastic Material ◽  
Linear Viscoelastic ◽  
The Impact ◽  
Good Agreement

Abstract In an effort to understand the dynamic hub forces on road vehicles, an advanced free-rolling tire-model is being developed in which the tread blocks and tire belt are modeled separately. This paper presents the interim results for the tread block modeling. The finite element code ABAQUS/Explicit is used to predict the contact forces on the tread blocks based on a linear viscoelastic material model. Special attention is paid to investigating the forces on the tread blocks during the impact and release motions. A pressure and slip-rate-dependent frictional law is applied in the analysis. A simplified numerical model is also proposed where the tread blocks are discretized into linear viscoelastic spring elements. The results from both models are validated via experiments in a high-speed rolling test rig and found to be in good agreement.

Dynamic model for high-speed rotors based on their experimental characterization

2017 ◽  
Vol 2 (4) ◽  
pp. 25
Author(s):  
L. A. Montoya ◽  
E. E. Rodríguez ◽  
H. J. Zúñiga ◽  
I. Mejía
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Experimental Characterization ◽  
Rotating Systems ◽  
Computing Performance ◽  
The Impact ◽  
Stiffness Distribution ◽  
Good Agreement

Rotating systems components such as rotors, have dynamic characteristics that are of great importance to understand because they may cause failure of turbomachinery. Therefore, it is required to study a dynamic model to predict some vibration characteristics, in this case, the natural frequencies and mode shapes (both of free vibration) of a centrifugal compressor shaft. The peculiarity of the dynamic model proposed is that using frequency and displacements values obtained experimentally, it is possible to calculate the mass and stiffness distribution of the shaft, and then use these values to estimate the theoretical modal parameters. The natural frequencies and mode shapes of the shaft were obtained with experimental modal analysis by using the impact test. The results predicted by the model are in good agreement with the experimental test. The model is also flexible with other geometries and has a great time and computing performance, which can be evaluated with respect to other commercial software in the future.

scholarly journals Measuring Hydrometeors Using a Precipitation Microphysical Characteristics Sensor: Sampling Effect of Different Bin Sizes on Drop Size Distribution Parameters

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Xichuan Liu ◽  
Taichang Gao ◽  
Yuntao Hu ◽  
Xiaojian Shu
Keyword(s):  
Drop Size ◽  
Rain Rate ◽  
Monte Carlo Model ◽  
Rain Gauge ◽  
Sampling Schemes ◽  
Distribution Parameters ◽  
Optimum Sampling ◽  
Simulation Results ◽  
The Impact ◽  
Good Agreement

In order to improve the measurement of precipitation microphysical characteristics sensor (PMCS), the sampling process of raindrops by PMCS based on a particle-by-particle Monte-Carlo model was simulated to discuss the effect of different bin sizes on DSD measurement, and the optimum sampling bin sizes for PMCS were proposed based on the simulation results. The simulation results of five sampling schemes of bin sizes in four rain-rate categories show that the raw capture DSD has a significant fluctuation variation influenced by the capture probability, whereas the appropriate sampling bin size and width can reduce the impact of variation of raindrop number on DSD shape. A field measurement of a PMCS, an OTT PARSIVEL disdrometer, and a tipping bucket rain Gauge shows that the rain-rate and rainfall accumulations have good consistencies between PMCS, OTT, and Gauge; the DSD obtained by PMCS and OTT has a good agreement; the probability of N0, μ, and Λ shows that there is a good agreement between the Gamma parameters of PMCS and OTT; the fitted μ-Λ and Z-R relationship measured by PMCS is close to that measured by OTT, which validates the performance of PMCS on rain-rate, rainfall accumulation, and DSD related parameters.

scholarly journals Does Multidisciplinary Team Simulation-Based Training Improve Obstetric Emergencies Skills?

Healthcare ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 170
Author(s):  
Encarna Hernández ◽  
Marcos Camacho ◽  
César Leal-Costa ◽  
María Ruzafa-Martínez ◽  
Antonio Jesús Ramos-Morcillo ◽  
...  
Keyword(s):  
Health Professionals ◽  
Multidisciplinary Team ◽  
Simulation Training ◽  
Observer Agreement ◽  
Second Phase ◽  
High Fidelity ◽  
Breech Delivery ◽  
Obstetric Emergencies ◽  
Quasi Experimental ◽  
The Impact

Clinical simulation in obstetrics has turned out to be a tool that can reduce the rate of perinatal morbidity and mortality. The objective of this study was to analyze the impact and evaluate the effects of training with high-fidelity simulation of obstetric emergencies on a multidisciplinary group. The quasi-experimental research study was structured in three phases: a first phase where the most important obstetric emergencies were determined, a second phase of design and development of the selected cases for simulation training, and a third and final phase where the abilities and satisfaction of the multidisciplinary team were analyzed. Three scenarios and their respective evaluation tools of obstetric emergencies were selected for simulation training: postpartum hemorrhage, shoulder dystocia, and breech delivery. The health professionals significantly improved their skills after training, and were highly satisfied with the simulation experience (p < 0.05). An inter-observer agreement between good and excellent reliability was obtained. Regarding conclusions, we can state that high-fidelity obstetric emergency simulation training improved the competencies of the health professionals.

scholarly journals Fragility assessment of existing low-rise steel moment-resisting frames with masonry infills under mainshock-aftershock earthquake sequences

2021 ◽  
Vol 19 (6) ◽  
pp. 2483-2504
Author(s):  
Luigi Di Sarno ◽  
Jing-Ren Wu
Keyword(s):  
Seismic Vulnerability ◽  
Steel Frames ◽  
Steel Frame ◽  
Second Phase ◽  
Moment Frames ◽  
Damage Level ◽  
Masonry Infills ◽  
Aftershock Sequences ◽  
The Impact ◽  
Multiple Earthquakes

AbstractThis paper presents the fragility assessment of non-seismically designed steel moment frames with masonry infills. The assessment considered the effects of multiple earthquakes on the damage accumulation of steel frames, which is an essential part of modern performance-based earthquake engineering. Effects of aftershocks are particularly important when examining damaged buildings and making post-quake decisions, such as tagging and retrofit strategy. The procedure proposed in the present work includes two phase assessment, which is based on incremental dynamic analyses of two refined numerical models of the case-study steel frame, i.e. with and without masonry infills, and utilises mainshock-aftershock sequences of natural earthquake records. The first phase focuses on the undamaged structure subjected to single and multiple earthquakes; the effects of masonry infills on the seismic vulnerability of the steel frame were also considered. In the second phase, aftershock fragility curves were derived to investigate the seismic vulnerability of infilled steel frames with post-mainshock damage caused by mainshocks. Comparative analyses were conducted among the mainshock-damaged structures considering three post-mainshock damage levels, including no damage. The impact of aftershocks was then discussed for each mainshock-damage level in terms of the breakpoint that marks the onset of exceeding post-mainshock damage level, as well as the probability of exceeding of superior damage level due to more significant aftershocks. The evaluation of the efficiency of commonly used intensity measures of aftershocks was also carried out as part of the second phase of assessment.

scholarly journals Effect of Short-Term Carbapenem Restriction on Antimicrobial Susceptibility of Resistant Gram-Negative Bacilli in an ICU

2020 ◽  
Vol 41 (S1) ◽  
pp. s200-s201
Author(s):  
Mariana Melo ◽  
Raquel Bandeira ◽  
lio de Castro Giselle Dias ◽  
Braulio Couto
Keyword(s):  
High Mortality ◽  
Bacterial Resistance ◽  
Statistical Significance ◽  
Public Health Problem ◽  
Resistance Rate ◽  
Second Phase ◽  
Short Term ◽  
Intervention Phase ◽  
Carbapenem Resistant ◽  
The Impact

Background: Carbapenem-resistant GNB infections are a serious public health problem worldwide, particularly due to the high mortality associated with them and the low number of therapeutic options. One approach to this challenge is the development of antimicrobial stewardship programs. Objective: We evaluated the impact of a carbapenem restriction program on reducing of bacterial resistance in an intensive care unit (ICU). Methods: A retrospective study conducted in 2 phases in the 80-bed ICU of an acute-care public hospital in Minas Gerais, Brazil. The preintervention phase lasted 16 months (January 2018–April 2019) and the second phase (carbapenem restriction), after the intervention, lasted 4 months (May–August 2019). The intervention was defined as carbapenem-sparing and the use of meropenem was authorized in 3 situations: (1) treatment of serious infections documented by extended-spectrum β-lactamase–producing Enterobacteriacea (ESBL); (2) therapeutic failure with the use of another antimicrobial; and (3) infectious disease recommendation. Data were obtained through consultation of electronic medical records and microbiological results, as standardized by the CLSI, for patients with a >48-hour stay in the ICU and who met the criteria for healthcare-associated infection (HAI) according to the CDC NHSN definition. Results: Before the intervention, on average, 50 cultures were obtained with positive results for multidrug-resistant GNB–MER-GNB (SD, 12.2) and in the intervention phase, this number was 31 cultures (SD, 12.8; P = .010). Average carbapenem consumption decreased significantly with corresponding increase in cefepime consumption in the same period (Fig. 1). The ATB (DDD per 1,000 patient days) before the intervention for carbapenems was 110.6 (SD, 97.1) and for cefepime was 8.2 (SD, 5.9). In the intervention phase, the ATB for carbapenems was 44.7 (SD, 38.5; P = .015) and for cefepime it was 32.0 (SD, 20.3; P < .001). In terms of multidrug resistance rate, before the intervention, 95 of 149 of Acinetobacter (64%) were resistant and during the intervention, 13 of 30 Acinetobacter (43%) were resistant (P = .043). Other GNB (Klebsiella, Proteus, Escherichia coli, and Pseudomonas) reduced the resistance rate, but without statistical significance. We observed a reduction in the HAI rate per MDR-GNB (Fig. 2): before the intervention, it was 22.7 (SD, 5.5) and during the intervention phase it was 16.5 (SD, 7.7; P = .07), although this change did not reach statistical significance. Nevertheless, the ICU Klebsiella infection rate did significantly decrease; it was 5.5 (SD, 1.9) before the intervention and 2.4 (SD, 1.8) after the intervention (P = .009). Conclusions: Short-term carbapenem restriction may be an effective strategy to reduce the incidence of carbapenem-resistant GNB infections in the ICU. The scarce arsenal available for the treatment of MDR-GNB and the high mortality rate justify the growing need for stewardship programs in Brazilian ICUs.Funding: NoneDisclosures: None

Thermal performance comparison of different sun tracking configurations

2019 ◽  
Vol 88 (2) ◽  
pp. 20902
Author(s):  
O. Achkari ◽  
A. El Fadar
Keyword(s):  
Thermal Performance ◽  
Electricity Generation ◽  
Arid Regions ◽  
Performance Comparison ◽  
Water Desalination ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
The Impact ◽  
The Mathematical Model ◽  
Good Agreement

Parabolic trough collector (PTC) is one of the most widespread solar concentration technologies and represents the biggest share of the CSP market; it is currently used in various applications, such as electricity generation, heat production for industrial processes, water desalination in arid regions and industrial cooling. The current paper provides a synopsis of the commonly used sun trackers and investigates the impact of various sun tracking modes on thermal performance of a parabolic trough collector. Two sun-tracking configurations, full automatic and semi-automatic, and a stationary one have numerically been investigated. The simulation results have shown that, under the system conditions (design, operating and weather), the PTC's performance depends strongly on the kind of sun tracking technique and on how this technique is exploited. Furthermore, the current study has proven that there are some optimal semi-automatic configurations that are more efficient than one-axis sun tracking systems. The comparison of the mathematical model used in this paper with the thermal profile of some experimental data available in the literature has shown a good agreement with a remarkably low relative error (2.93%).

Temperature Dependence of Hole Impact Ionization Coefficient in 4H-SiC Photodiodes

2009 ◽  
Vol 615-617 ◽  
pp. 311-314 ◽  
Author(s):  
W.S. Loh ◽  
J.P.R. David ◽  
B.K. Ng ◽  
Stanislav I. Soloviev ◽  
Peter M. Sandvik ◽  
...  
Keyword(s):  
Phonon Scattering ◽  
Impact Ionization ◽  
Positive Temperature Coefficient ◽  
Positive Temperature ◽  
Different Temperatures ◽  
Ionization Coefficients ◽  
Increasing Temperature ◽  
The Impact ◽  
Good Agreement ◽  
Ionization Rates

Hole initiated multiplication characteristics of 4H-SiC Separate Absorption and Multiplication Avalanche Photodiodes (SAM-APDs) with a n- multiplication layer of 2.7 µm were obtained using 325nm excitation at temperatures ranging from 300 to 450K. The breakdown voltages increased by 200mV/K over the investigated temperature range, which indicates a positive temperature coefficient. Local ionization coefficients, including the extracted temperature dependencies, were derived in the form of the Chynoweth expression and were used to predict the hole multiplication characteristics at different temperatures. Good agreement was obtained between the measured and the modeled multiplication using these ionization coefficients. The impact ionization coefficients decreased with increasing temperature, corresponding to an increase in breakdown voltage. This result agrees well with the multiplication characteristics and can be attributed to phonon scattering enhanced carrier cooling which has suppressed the ionization process at high temperatures. Hence, a much higher electric field is required to achieve the same ionization rates.

scholarly journals Modelling and Simulation of the Radiant Field in an Annular Heterogeneous Photoreactor Using a Four-Flux Model

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
O. Alvarado-Rolon ◽  
R. Natividad ◽  
R. Romero ◽  
L. Hurtado ◽  
A. Ramírez-Serrano
Keyword(s):  
Photocatalytic Oxidation ◽  
Reaction Rate ◽  
Comsol Multiphysics ◽  
Discrete Ordinate Method ◽  
Discrete Ordinate ◽  
Cylindrical Coordinates ◽  
Volumetric Rate ◽  
Flux Model ◽  
Reaction Rate Equation ◽  
Good Agreement

This work focuses on modeling and simulating the absorption and scattering of radiation in a photocatalytic annular reactor. To achieve so, a model based on four fluxes (FFM) of radiation in cylindrical coordinates to describe the radiant field is assessed. This model allows calculating the local volumetric rate energy absorption (LVREA) profiles when the reaction space of the reactors is not a thin film. The obtained results were compared to radiation experimental data from other authors and with the results obtained by discrete ordinate method (DOM) carried out with the Heat Transfer Module of Comsol Multiphysics® 4.4. The FFM showed a good agreement with the results of Monte Carlo method (MC) and the six-flux model (SFM). Through this model, the LVREA is obtained, which is an important parameter to establish the reaction rate equation. In this study, the photocatalytic oxidation of benzyl alcohol to benzaldehyde was carried out, and the kinetic equation for this process was obtained. To perform the simulation, the commercial software COMSOL Multiphysics v. 4.4 was employed.

scholarly journals Integrative analysis of <i>Geobacter</i> spp. and sulfate-reducing bacteria during uranium bioremediation

2012 ◽  
Vol 9 (3) ◽  
pp. 1033-1040 ◽  
Author(s):  
M. Barlett ◽  
K. Zhuang ◽  
R. Mahadevan ◽  
D. Lovley
Keyword(s):  
Sulfate Reducing Bacteria ◽  
Field Trials ◽  
Second Phase ◽  
Sulfate Reducing ◽  
Organic Electron ◽  
Poor Understanding ◽  
Key Factor ◽  
Reducing Bacteria ◽  
The Impact

Abstract. Enhancing microbial U(VI) reduction with the addition of organic electron donors is a promising strategy for immobilizing uranium in contaminated groundwaters, but has yet to be optimized because of a poor understanding of the factors controlling the growth of various microbial communities during bioremediation. In previous field trials in which acetate was added to the subsurface, there were two distinct phases: an initial phase in which acetate-oxidizing, U(VI)-reducing Geobacter predominated and U(VI) was effectively reduced and a second phase in which acetate-oxidizing sulfate reducing bacteria (SRB) predominated and U(VI) reduction was poor. The interaction of Geobacter and SRB was investigated both in sediment incubations that mimicked in situ bioremediation and with in silico metabolic modeling. In sediment incubations, Geobacter grew quickly but then declined in numbers as the microbially reducible Fe(III) was depleted whereas the SRB grow more slowly and reached dominance after 30–40 days. Modeling predicted a similar outcome. Additional modeling in which the relative initial percentages of the Geobacter and SRB were varied indicated that there was little to no competitive interaction between Geobacter and SRB when acetate was abundant. Further simulations suggested that the addition of Fe(III) would revive the Geobacter, but have little to no effect on the SRB. This result was confirmed experimentally. The results demonstrate that it is possible to predict the impact of amendments on important components of the subsurface microbial community during groundwater bioremediation. The finding that Fe(III) availability, rather than competition with SRB, is the key factor limiting the activity of Geobacter during in situ uranium bioremediation will aid in the design of improved uranium bioremediation strategies.

Sign in / Sign up

Export Citation Format

Share Document