scholarly journals Surface Plasmon Resonance Assay for Label-Free and Selective Detection of HIV-1 p24 Protein

Biosensors ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 180
Author(s):  
Lucia Sarcina ◽  
Giuseppe Felice Mangiatordi ◽  
Fabrizio Torricelli ◽  
Paolo Bollella ◽  
Zahra Gounani ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Covalent Binding ◽  
Hiv Infections ◽  
Selectivity Ratio ◽  
Selective Detection ◽  
Label Free ◽  
Self Assembled Monolayer ◽  
Label Free Detection ◽  
P24 Protein ◽  
Hiv 1

The early detection of the human immunodeficiency virus (HIV) is of paramount importance to achieve efficient therapeutic treatment and limit the disease spreading. In this perspective, the assessment of biosensing assay for the HIV-1 p24 capsid protein plays a pivotal role in the timely and selective detection of HIV infections. In this study, multi-parameter-SPR has been used to develop a reliable and label-free detection method for HIV-1 p24 protein. Remarkably, both physical and chemical immobilization of mouse monoclonal antibodies against HIV-1 p24 on the SPR gold detecting surface have been characterized for the first time. The two immobilization techniques returned a capturing antibody surface coverage as high as (7.5 ± 0.3) × 1011 molecule/cm2 and (2.4 ± 0.6) × 1011 molecule/cm2, respectively. However, the covalent binding of the capturing antibodies through a mixed self-assembled monolayer (SAM) of alkanethiols led to a doubling of the p24 binding signal. Moreover, from the modeling of the dose-response curve, an equilibrium dissociation constant KD of 5.30 × 10−9 M was computed for the assay performed on the SAM modified surface compared to a much larger KD of 7.46 × 10−5 M extracted for the physisorbed antibodies. The chemically modified system was also characterized in terms of sensitivity and selectivity, reaching a limit of detection of (4.1 ± 0.5) nM and an unprecedented selectivity ratio of 0.02.

scholarly journals Label-Free Electrochemical Biosensor Based on Au@MoS₂–PANI for Escherichia coli Detection

Chemosensors ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 49
Author(s):  
Pushap Raj ◽  
Man Hwan Oh ◽  
Kyudong Han ◽  
Tae Yoon Lee
Keyword(s):  
Escherichia Coli ◽  
Bacterial Infections ◽  
Limit Of Detection ◽  
Bacterial Pathogens ◽  
Cost Effective ◽  
Covalent Immobilization ◽  
Label Free ◽  
Self Assembled Monolayer ◽  
Detection Range ◽  
Linear Detection

Bacterial infections have become a significant challenge in terms of public health, the food industry, and the environment. Therefore, it is necessary to address these challenges by developing a rapid, cost-effective, and easy-to-use biosensor for early diagnosis of bacterial pathogens. Herein, we developed a simple, label-free, and highly sensitive immunosensor based on electrochemical detection using the Au@MoS₂–PANI nanocomposite. The conductivity of the glassy carbon electrode is greatly enhanced using the Au@MoS₂–PANI nanocomposite and a self-assembled monolayer of mercaptopropionic acid on the gold nanoparticle surface was employed for the covalent immobilization of antibodies to minimize the nonspecific adsorption of bacterial pathogens on the electrode surface. The biosensor established a high selectivity and sensitivity with a low limit of detection of 10 CFU/mL, and detected Escherichia coli within 30 min. Moreover, the developed biosensor demonstrated a good linear detection range, practical utility in urine samples, and electrode regenerative studies.

One-Dimensional Diffraction Grating of Poly(Methacrylic Acid) Brushes For The Rapid Label-Free Detection of Yersinia Pestis With a Reflective Laser System

2021 ◽  
Author(s):  
Feng-Ping Lin ◽  
Hui-Ling Hsu ◽  
Hui-Chung Lin ◽  
Hsin-Hsien Huang ◽  
Chien-Hsing Lu ◽  
...  
Keyword(s):  
Laser Beam ◽  
Yersinia Pestis ◽  
Methacrylic Acid ◽  
Limit Of Detection ◽  
Incident Angle ◽  
Diffraction Effect ◽  
Label Free ◽  
Diffraction Intensity ◽  
One Dimensional ◽  
Label Free Detection

Abstract Background: Because of the low sensitivity of commercial products, development of a facile method to rapidly identify plague on-site remains highly attractive. Line arrays of poly(methacrylic acid) (PMAA) brushes were grafted using a photoresist template to fabricate one-dimensional diffraction gratings (DGs). The as-prepared samples first bound protein G to immobilize and orient the tails of the antibody of Yersinia pestis (abY). A laser beam was employed to analyze the 2D and 3D reflective signals of DGs at an incident angle of 45°. The abY-tailed PMAA DG possessed an optical feature with a characteristic diffraction effect along the SII, in which the projection of the laser beam on the plane of the DG chip was parallel to the strips, and ST configurations, in which they were perpendicular. A fluidic diffraction chip based on the abY-tailed PMMA DG was fabricated to examine the ability to detect Yersinia pestis along the ST configuration. Results: Upon flowing through the chip, Yersinia pestis was attached to the abY-tailed PMMA DG, which changed the diffraction intensity. The degree of the diffraction intensity exhibited a linear response to Yersinia pestis at concentrations from 102 to 107 CFU mL−1, and the limit of detection was 75 CFU mL−1, 1000 times lower than a commercial product (Alexter Bio-Detect Test). The diffractive sensor could selectively detect Yersinia pestis in spiked serum samples, with excellent standard deviation and recovery. Conclusion: Our platform provides a simple, label-free method for on-site plague diagnosis to prevent the highly rapid transmission of plague.

scholarly journals Rapid label-free SERS detection of foodborne pathogenic bacteria based on hafnium ditelluride-Au nanocomposites

2020 ◽  
Vol 13 (05) ◽  
pp. 2041004 ◽  
Author(s):  
Yang Li ◽  
Yanxian Guo ◽  
Binggang Ye ◽  
Zhengfei Zhuang ◽  
Peilin Lan ◽  
...  
Keyword(s):  
Pathogenic Bacteria ◽  
Limit Of Detection ◽  
Principal Component ◽  
High Sensitivity ◽  
Chemical Mechanism ◽  
Sers Substrate ◽  
Label Free ◽  
Label Free Detection ◽  
Surface Enhanced Raman ◽  
Foodborne Pathogenic Bacteria

Two-dimensional (2D) nanomaterials have captured an increasing attention in biophotonics owing to their excellent optical features. Herein, 2D hafnium ditelluride (HfTe[Formula: see text], a new member of transition metal tellurides, is exploited to support gold nanoparticles fabricating HfTe2-Au nanocomposites. The nanohybrids can serve as novel 2D surface-enhanced Raman scattering (SERS) substrate for the label-free detection of analyte with high sensitivity and reproducibility. Chemical mechanism originated from HfTe2 nanosheets and the electromagnetic enhancement induced by the hot spots on the nanohybrids may largely contribute to the superior SERS effect of HfTe2-Au nanocomposites. Finally, HfTe2-Au nanocomposites are utilized for the label-free SERS analysis of foodborne pathogenic bacteria, which realize the rapid and ultrasensitive Raman test of Escherichia coli, Listeria monocytogenes, Staphylococcus aureus and Salmonella with the limit of detection of 10 CFU/mL and the maximum Raman enhancement factor up to [Formula: see text]. Combined with principal component analysis, HfTe2-Au-based SERS analysis also completes the bacterial classification without extra treatment.

scholarly journals Plasmonic nanocrystals on polycarbonate substrates for direct and label-free biodetection of Interleukin-6 in bioengineered 3D skeletal muscles

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Gerardo A Lopez-Muñoz ◽  
Juan M Fernández-Costa ◽  
Maria Alejandra Ortega ◽  
Jordina Balaguer-Trias ◽  
Eduard Martin-Lasierra ◽  
...  
Keyword(s):  
Interleukin 6 ◽  
Limit Of Detection ◽  
Culture Media ◽  
Incident Angle ◽  
Wide Field ◽  
Label Free ◽  
Cell Culture Media ◽  
Muscle Tissues ◽  
Label Free Detection ◽  
Potential Benefits

Abstract The development of nanostructured plasmonic biosensors has been widely widespread in the last years, motivated by the potential benefits they can offer in integration, miniaturization, multiplexing opportunities, and enhanced performance label-free biodetection in a wide field of applications. Between them, engineering tissues represent a novel, challenging, and prolific application field for nanostructured plasmonic biosensors considering the previously described benefits and the low levels of secreted biomarkers (≈pM–nM) to detect. Here, we present an integrated plasmonic nanocrystals-based biosensor using high throughput nanostructured polycarbonate substrates. Metallic film thickness and incident angle of light for reflectance measurements were optimized to enhance the detection of antibody–antigen biorecognition events using numerical simulations. We achieved an enhancement in biodetection up to 3× as the incident angle of light decreases, which can be related to shorter evanescent decay lengths. We achieved a high reproducibility between channels with a coefficient of variation below 2% in bulk refractive index measurements, demonstrating a high potential for multiplexed sensing. Finally, biosensing potential was demonstrated by the direct and label-free detection of interleukin-6 biomarker in undiluted cell culture media supernatants from bioengineered 3D skeletal muscle tissues stimulated with different concentrations of endotoxins achieving a limit of detection (LOD) of ≈ 0.03 ng/mL (1.4 pM).

A carbon ink screen-printed immunoelectrode for Dengue virus NS1protein detection based on photosynthesized amine gold nanoparticles

2018 ◽  
pp. 1-12
Keyword(s):  
Gold Nanoparticles ◽  
Dengue Virus ◽  
Limit Of Detection ◽  
Colloidal Suspension ◽  
Electrochemical Immunosensor ◽  
Label Free ◽  
Vis Spectroscopy ◽  
Label Free Detection ◽  
The Impact ◽  
Screen Printed

Dengue virus (DENV) is a reemerging mosquito-borne disease that is endemic in more than 125 countries, affecting 200 million people per year. Screening testing has been a good attempt to minimize the impact caused by high morbity and mortality rates of DENV. In this study, a simple and disposable label-free electrochemical immunosensor based on a carbon ink graphite screen-printed electrode (SPE) one-step fabricated was developed for detection of non-structural 1 protein (NS1). The SPE surface was modified by drop casting, depositing a colloidal suspension containing amine-functionalized gold nanoparticles (AuNP-NH2). AuNPs were synthetized by a photoinduced physical method, illuminating preformed gold seeds with a light-emitting diode (LED,) at blue region, by using the polyethyleneimine (NH2) as reductor and stabilizing agent. UV-VIS spectroscopy and Transmission Electron Microscopy (TEM) were used to characterize the amine AuNPs. Electrocatalytic activity of AuNPs allowed more sensitivity for a label-free detection of NS1 by square wave voltammetry (SWV), with linear response from 0.1 to 2 µg mL-1. It was found a good linearity (coefficient of correlation of 0.995 (p<0.01) and a limit of detection of 0.03 µg mL-1 NS1 for analytical responses. AuNP-NH2 synthesis provided an easy oriented immobilization of anti-NS1 antibodies by Fc portion, resulting in a simple fabrication immunosensor with relative high performance and feasibility for early diagnostic of DENV.

scholarly journals Development of Monoclonal Antibodies against HIV-1 p24 Protein and Its Application in Colloidal Gold Immunochromatographic Assay for HIV-1 Detection

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Yi Ma ◽  
Chao Ni ◽  
Emmanuel E. Dzakah ◽  
Haiying Wang ◽  
Keren Kang ◽  
...  
Keyword(s):  
Monoclonal Antibodies ◽  
Early Diagnosis ◽  
Colloidal Gold ◽  
Limit Of Detection ◽  
Sandwich Elisa ◽  
Immunochromatographic Assay ◽  
Suitable Alternative ◽  
P24 Protein ◽  
Hybridoma Cell Lines ◽  
Hiv 1

Human immunodeficiency virus type 1 (HIV-1) p24 protein is the most abundant viral protein of HIV-1. This protein is secreted in blood serum at high levels during the early stages of HIV-1 infection, making it a biomarker for early diagnosis. In this study, a colloidal gold immunochromatographic assay (GICA) was established for detecting p24 protein using mouse monoclonal antibodies (mAbs). The HIV-1 p24 protein was expressed inE. colistrain BL21 and the purified protein was used to immunize mice. Stable hybridoma cell lines secreting anti-p24 monoclonal antibodies were obtained after ELISA screening and subcloning by limiting dilution. 34 different capture and labeling mAb pairs were selected by a novel antibody-capture indirect sandwich ELISA and then applied in GICA to detect p24 protein. The GICA method has a limit of detection (LOD) of 25 pg/mL and could detect p24 protein in all 10 positive samples obtained from the National Reference of HIV-1 p24 antigen. Out of 153 negative samples tested, 3 false positives results were obtained. The overall specificity of this test was 98.03%. The good sensitivity and specificity of this method make it a suitable alternative to provide a more convenient and efficient tool for early diagnosis of HIV infection.

scholarly journals Detecting Phase Shifts in Surface Plasmon Resonance: A Review

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Y. H. Huang ◽  
H. P. Ho ◽  
S. Y. Wu ◽  
S. K. Kong
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Limit Of Detection ◽  
Biological Species ◽  
Optical Beam ◽  
Phase Detection ◽  
Label Free ◽  
Advantages And Disadvantages ◽  
Label Free Detection

Under certain conditions, a surface plasmon wave along a metal-dielectric interface can be excited by an optical beam. The reflected optical beam will then undergo changes in both intensity and phase. As the level of intensity or phase change is quite sensitive to the coupling conditions such as the molecule concentration on the metal surface, this phenomenon has been utilized for label-free detection of biological species and characterization of molecular interactions during the last two decades. Currently, most of the commercial surface plasmon resonance (SPR) sensors rely on the detection of absorption dip in angular or wavelength spectrum. However, recent researches have shown that phase detection has the potential to achieve lower limit of detection (LoD) and higher throughput. This paper, thus, intends to review various schemes and configurations for SPR phase detection. The performance advantages and disadvantages of various schemes will be emphasized. It is hoped that this paper will provide some insights to researchers interested in SPR sensing and help them to develop SPR sensors with better sensitivity and higher throughput.

scholarly journals PfHRP2 detection using plasmonic optrodes: performance analysis

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Médéric Loyez ◽  
Mathilde Wells ◽  
Stéphanie Hambÿe ◽  
François Hubinon ◽  
Bertrand Blankert ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Limit Of Detection ◽  
Fiber Surface ◽  
Malaria Diagnosis ◽  
High Sensitivity ◽  
Cost Effective ◽  
Label Free ◽  
Multiple Receptors ◽  
Label Free Detection

Abstract Background Early malaria diagnosis and its profiling require the development of new sensing platforms enabling rapid and early analysis of parasites in blood or saliva, aside the widespread rapid diagnostic tests (RDTs). Methods This study shows the performance of a cost-effective optical fiber-based solution to target the presence of Plasmodium falciparum histidine-rich protein 2 (PfHRP2). Unclad multimode optical fiber probes are coated with a thin gold film to excite Surface Plasmon Resonance (SPR) yielding high sensitivity to bio-interactions between targets and bioreceptors grafted on the metal surface. Results Their performances are presented in laboratory conditions using PBS spiked with growing concentrations of purified target proteins and within in vitro cultures. Two probe configurations are studied through label-free detection and amplification using secondary antibodies to show the possibility to lower the intrisic limit of detection. Conclusions As malaria hits millions of people worldwide, the improvement and multiplexing of this optical fiber technique can be of great interest, especially for a future purpose of using multiple receptors on the fiber surface or several coated-nanoparticles as amplifiers.

scholarly journals 3D-printed microfluidics integrated with optical nanostructured porous aptasensors for protein detection

2021 ◽  
Vol 188 (3) ◽  
Author(s):  
Sofia Arshavsky-Graham ◽  
Anton Enders ◽  
Shanny Ackerman ◽  
Janina Bahnemann ◽  
Ester Segal
Keyword(s):  
Limit Of Detection ◽  
Protein Detection ◽  
Target Protein ◽  
Superior Performance ◽  
Generic Model ◽  
Label Free ◽  
Uv Curable ◽  
Microfluidic Platform ◽  
Label Free Detection ◽  
3D Printed

AbstractMicrofluidic integration of biosensors enables improved biosensing performance and sophisticated lab-on-a-chip platform design for numerous applications. While soft lithography and polydimethylsiloxane (PDMS)-based microfluidics are still considered the gold standard, 3D-printing has emerged as a promising fabrication alternative for microfluidic systems. Herein, a 3D-printed polyacrylate-based microfluidic platform is integrated for the first time with a label-free porous silicon (PSi)–based optical aptasensor via a facile bonding method. The latter utilizes a UV-curable adhesive as an intermediate layer, while preserving the delicate nanostructure of the porous regions within the microchannels. As a proof-of-concept, a generic model aptasensor for label-free detection of his-tagged proteins is constructed, characterized, and compared to non-microfluidic and PDMS-based microfluidic setups. Detection of the target protein is carried out by real-time monitoring reflectivity changes of the PSi, induced by the target binding to the immobilized aptamers within the porous nanostructure. The microfluidic integrated aptasensor has been successfully used for detection of a model target protein, in the range 0.25 to 18 μM, with a good selectivity and an improved limit of detection, when compared to a non-microfluidic biosensing platform (0.04 μM vs. 2.7 μM, respectively). Furthermore, a superior performance of the 3D-printed microfluidic aptasensor is obtained, compared to a conventional PDMS-based microfluidic platform with similar dimensions. Graphical abstract

Sign in / Sign up

Export Citation Format

Share Document