scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Utilization of treated coffee husk as low-cost bio-sorbent for adsorption of methylene blue

2020 ◽  
Vol 38 (5-6) ◽  
pp. 205-222 ◽  
Author(s):  
Adane Adugna Ayalew ◽  
Tadele Assefa Aragaw
Keyword(s):  
Methylene Blue ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coffee Husk ◽  
Equilibrium Data ◽  
Endothermic Process ◽  
Pseudo Second Order ◽  
Maximum Removal

Dyes and pigments have been used in many industries for colorization purpose but they pose hazards to the environment and end users of water. Therefore, it is important to remove this pollutant from waste water before their final disposal. This study aimed to investigate the removal of methylene blue by cost effective, ecofriendly, high-efficiency bio-sorbent from activated coffee husk. The process was carried out using chemical activation (H3PO4) process. Fourier transform infrared spectroscopy and surface analyzer (Brunauer-Emmett-Teller) were used to characterize the adsorbent. The specific surface area adsorbent was obtained as 28.54 m2/g. The maximum removal efficiency was obtained as 96.9% at pH of 5, initial dye concentration of 20 mg/L, adsorbent dosage of 0.8 g/50 mL, for contact time of 50 min and 30°C temperature on the activation surface of coffee husk. Langmuir model was found to fit the equilibrium data for methylene blue adsorption with 6.82 mg/g at 30°C. The adsorption process follows the pseudo-second-order model. Thermodynamics analysis showed that the adsorption of methylene blue on to the activated coffee husk was a spontaneous and endothermic process. The experimental data obtained in the present study proved that coffee husk is a suitable bio-sorbent in removal of cationic dyes.

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

scholarly journals Modelling of new generation plasma optical devices

Nukleonika ◽  
2016 ◽  
Vol 61 (2) ◽  
pp. 207-212 ◽  
Author(s):  
Irina V. Litovko ◽  
Alexy A. Goncharov ◽  
Andrew N. Dobrovolskiy ◽  
Lily V. Naiko ◽  
Irina V. Naiko
Keyword(s):  
Low Cost ◽  
Rocket Engine ◽  
Cost Effective ◽  
Optical Devices ◽  
High Tech ◽  
Practical Applications ◽  
Plasma Accelerators ◽  
New Generation ◽  
Closed Electron ◽  
Positive Space

Abstract The paper presents new generation plasma optical devices based on the electrostatic plasma lens configuration that opens a novel attractive possibility for effective high-tech practical applications. Original approaches to use of plasma accelerators with closed electron drift and open walls for the creation of a cost-effective low-maintenance plasma lens with positive space charge and possible application for low-cost, low-energy rocket engine are described. The preliminary experimental, theoretical and simulation results are presented. It is noted that the presented plasma devices are attractive for many different applications in the state-of-the-art vacuum-plasma processing.

scholarly journals Effective Removal of Malachite Green from Aqueous Solutions Using Magnetic Nanocomposite: Synthesis, Characterization, and Equilibrium Study

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Ali Q. Alorabi
Keyword(s):  
Surface Area ◽  
Malachite Green ◽  
Chemical Activation ◽  
Aqueous Media ◽  
Kinetic Studies ◽  
Cost Effective ◽  
Magnetic Nanocomposite ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Order Kinetic

In this work, magnetized activated Juniperus procera leaves (Fe3O4@AJPL) were successfully prepared via chemical activation of JPL and in situ coprecipitation with Fe3O4. A Fe3O4@AJPL nanocomposite was successfully applied for the elimination of malachite green (MG) dye from aqueous media. The prepared Fe3O4@AJPL adsorbent was characterized by SEM, EDX, TEM, XRD, FTIR, TGA, and BET surface area analyses. The BET surface area and pore size of the Fe3O4@AJPL nanocomposite were found to be 38.44 m2/g and 10.6 nm, respectively. The XRD and FTIR results indicated the formation of a Fe3O4@AJPL nanocomposite. Different parameters, such as pH of the solution (3–8), adsorbent dosage (10–100 mg), temperature (25–45°C), contact time (5-240 min), and initial MG concentrations (20–350 mg/L), for the elimination of the MG dye using Fe3O4@AJPL were optimized and found to be 7, 50 mg, 45°C, 120 min, and 150 mg/L, respectively. The nonlinear isotherm and kinetic studies exhibited a better fitting to second-order kinetic and Langmuir isotherm models, with a maximum monolayer adsorption capacity of 318.3 mg/g at 45°C, which was highly superior to the previously reported magnetic nanocomposite adsorbents. EDX analyses confirmed the presence of nitrogen on the Fe3O4@AJPL surface after MG adsorption. The calculated thermodynamic factors indicated endothermic and spontaneous processes. The desorption of MG dye from Fe3O4@AJPL was performed using a solution of 90% ethanol. Finally, it could be concluded that the designed Fe3O4@AJPL magnetic nanocomposite will be a cost-effective and promising adsorbent for the elimination of MG from aqueous media.

scholarly journals High yield synthesis of graphene quantum dots from biomass waste as a highly selective probe for Fe3+ sensing

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Aumber Abbas ◽  
Tanveer A. Tabish ◽  
Steve J. Bull ◽  
Tuti Mariana Lim ◽  
Anh N. Phan
Keyword(s):  
Quantum Dots ◽  
Optical Properties ◽  
Low Cost ◽  
Graphene Quantum Dots ◽  
Cost Effective ◽  
Renewable Resource ◽  
Microwave Treatment ◽  
High Yield ◽  
Biomass Waste ◽  
Practical Applications

AbstractGraphene quantum dots (GQDs), a novel type of zero-dimensional fluorescent materials, have gained considerable attention owing to their unique optical properties, size and quantum confinement. However, their high cost and low yield remain open challenges for practical applications. In this work, a low cost, green and renewable biomass resource is utilised for the high yield synthesis of GQDs via microwave treatment. The synthesis approach involves oxidative cutting of short range ordered carbon derived from pyrolysis of biomass waste. The GQDs are successfully synthesised with a high yield of over 84%, the highest value reported to date for biomass derived GQDs. As prepared GQDs are highly hydrophilic and exhibit unique excitation independent photoluminescence emission, attributed to their single-emission fluorescence centre. As prepared GQDs are further modified by simple hydrothermal treatment and exhibit pronounced optical properties with a high quantum yield of 0.23. These modified GQDs are used for the highly selective and sensitive sensing of ferric ions (Fe3+). A sensitive sensor is prepared for the selective detection of Fe3+ ions with a detection limit of as low as 2.5 × 10–6 M. The utilisation of renewable resource along with facile microwave treatment paves the way to sustainable, high yield and cost-effective synthesis of GQDs for practical applications.

Assessment of Urtica as a low-cost adsorbent for methylene blue removal: kinetic, equilibrium, and thermodynamic studies

2015 ◽  
Vol 69 (7) ◽  
Author(s):  
Mohammad Peydayesh ◽  
Mojgan Isanejad ◽  
Toraj Mohammadi ◽  
Seyed Mohammad Reza Seyed Jafari
Keyword(s):  
Methylene Blue ◽  
Adsorption Process ◽  
Low Cost ◽  
Cost Effective ◽  
Sem Analysis ◽  
Order Kinetic ◽  
Solution Ph ◽  
Factors Affecting ◽  
Order Kinetic Model ◽  
Mb Adsorption

AbstractMethylene blue (MB) removal using eco-friendly, cost-effective, and freely available Urtica was investigated. The morphology of the adsorbent surface and the nature of the possible Urtica and MB interactions were examined using SEM analysis and the FTIR technique, respectively. Various factors affecting MB adsorption such as adsorption time, initial MB concentration, temperature, and solution pH were investigated. The adsorption process was analysed using different kinetic models and isotherms. The results showed that the MB adsorption kinetic follows a pseudo-second-order kinetic model and the isotherm data fit the Langmuir isotherm well. Thermodynamic parameters, such as ΔG°, ΔH°, and ΔS°, were also evaluated, and the results indicated that the adsorption process is endothermic and spontaneous in nature. The MB adsorption capacity of Urtica was found to be as high as 101.01 mg g

scholarly journals Design and Implementation of Cost-Effective IoT Energy Meter to Monitor Energy Flow in Smart Grids

2020 ◽  
Vol 9 (1) ◽  
pp. 1584-1588
Keyword(s):  
Smart Grids ◽  
Energy Flow ◽  
Low Cost ◽  
Cost Effective ◽  
Android Application ◽  
Human Errors ◽  
Practical Applications ◽  
Energy Meter ◽  
Reduced Costs ◽  
Reducing Costs

This paper presents a device that uses the evolving IoT technology to design and implement an internet-based energy meter. This meters, being cheap and easy-to-implement solution, enables consumers to monitor the daily usage of electric power easily. This work primarily concerns the energy-monitoring aspect of IoT, along with discussing other advantages of this meter, such as its ability to overcome human errors and reducing dependency on manual labor, besides reducing costs in energy consumption. The proposed design in case 1,and case2 which are comprises a low-cost wireless network for smart energy along with an android application capable of automatically reading the unit and then sending the data automatically provides great advantages to users by allowing them to keep a track of their meter reading. This system will help users by allowing them to not only take steps to reduce power wastage but also bring down costs of consumption, along with minimizing the threat of power theft, which is incurs great losses to power companies. Experimental results of this study show that the proposed IoT meter works efficiently and has proven its potential in practical applications at substantially reduced costs.

scholarly journals Mangosteen Peel-Alginate Biocomposite Beads An Efficient and Sustainable Adsorbent For Decontamination of Methylene Blue

2021 ◽  
Author(s):  
Asma Nasrullah ◽  
Amir Sada Khan ◽  
A. H. Bhat ◽  
Taghreed M. Fagieh ◽  
Ersaa M. Bakhsh ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Cost Effective ◽  
Alginate Beads ◽  
Basic Medium ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Removal Capacity ◽  
Pseudo Second Order ◽  
Best Fit

Abstract This study examines mangosteen peels waste and alginate beads (MPAB) as an efficient, sustainable and low-cost adsorbent for removal of methylene blue (MB) cationic dye from aqueous solution in a batch adsorption system. Surface functional groups, surface morphology, surface properties, and thermal stability of MBAB were analyzed using various instrumental techniques such as FTIR, FESEM, BET and TGA techniques. MPAB adsorption efficiency for MB was investigated through variation of dosage (0.01- 0.08g), pH (2- 10), contact time (60- 1320 min), MB concentration (20- 100 mg/L) and temperature (298- 333K). MPAB showed maximum removal capacity of 373 mg/g at 25 oC in basic medium. Kinetic and isotherm studies showed that pseudo second order kinetic models and both Freundlich and Langmuir isotherms best fit the experimental data. The findings revealed that novel MPAB has the potential to be a cost-effective adsorbent for removal of textile dyes.

Comparative studies on adsorptive removal of heavy metal ions by biosorbent, bio-char and activated carbon obtained from low cost agro-residue

2015 ◽  
Vol 73 (2) ◽  
pp. 423-436 ◽  
Author(s):  
Çisem Kırbıyık ◽  
Ayşe Eren Pütün ◽  
Ersan Pütün
Keyword(s):  
Activated Carbon ◽  
Metal Ion ◽  
Low Cost ◽  
Chemical Activation ◽  
Second Order ◽  
Isotherm Models ◽  
Standard Entropy ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order

In this study, Fe(III) and Cr(III) metal ion adsorption processes were carried out with three adsorbents in batch experiments and their adsorption performance was compared. These adsorbents were sesame stalk without pretreatment, bio-char derived from thermal decomposition of biomass, and activated carbon which was obtained from chemical activation of biomass. Scanning electron microscopy and Fourier transform–infrared techniques were used for characterization of adsorbents. The optimum conditions for the adsorption process were obtained by observing the influences of solution pH, adsorbent dosage, initial solution concentration, contact time and temperature. The optimum adsorption efficiencies were determined at pH 2.8 and pH 4.0 for Fe(III) and Cr(III) metal ion solutions, respectively. The experimental data were modelled by different isotherm models and the equilibriums were well described by the Langmuir adsorption isotherm model. The pseudo-first-order, pseudo-second-order kinetic, intra-particle diffusion and Elovich models were applied to analyze the kinetic data and to evaluate rate constants. The pseudo-second-order kinetic model gave a better fit than the others. The thermodynamic parameters, such as Gibbs free energy change ΔG°, standard enthalpy change ΔH° and standard entropy change ΔS° were evaluated. The thermodynamic study showed the adsorption was a spontaneous endothermic process.

scholarly journals Easy Preparation of Liposome@PDA Microspheres for Fast and Highly Efficient Removal of Methylene Blue from Water

2021 ◽  
Vol 22 (21) ◽  
pp. 11916
Author(s):  
Vincenzo De Leo ◽  
Anna Maria Maurelli ◽  
Chiara Ingrosso ◽  
Fabio Lupone ◽  
Lucia Catucci
Keyword(s):  
Methylene Blue ◽  
High Efficiency ◽  
Adsorption Process ◽  
Water Remediation ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
Weakly Alkaline ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Alkaline Conditions

Mussel-inspired chemistry was usefully exploited here with the aim of developing a high-efficiency, environmentally friendly material for water remediation. A micro-structured material based on polydopamine (PDA) was obtained by using liposomes as templating agents and was used for the first time as an adsorbent material for the removal of methylene blue (MB) dye from aqueous solutions. Phospholipid liposomes were made by extrusion and coated with PDA by self-polymerization of dopamine under simple and mild conditions. The obtained Liposome@PDA microspheres were characterized by DLS and Zeta potential analysis, TEM microscopy, and FTIR spectroscopy. The effects of pH, temperature, MB concentration, amount of Liposome@PDA, and contact time on the adsorption process were investigated. Results showed that the highest adsorption capacity was obtained in weakly alkaline conditions (pH = 8.0) and that it could reach up to 395.4 mg g−1 at 298 K. In addition, adsorption kinetics showed that the adsorption behavior fits a pseudo-second-order kinetic model well. The equilibrium adsorption data, instead, were well described by Langmuir isotherm. Thermodynamic analysis demonstrated that the adsorption process was endothermic and spontaneous (ΔG0 = −12.55 kJ mol−1, ΔH0 = 13.37 kJ mol−1) in the investigated experimental conditions. Finally, the applicability of Liposome@PDA microspheres to model wastewater and the excellent reusability after regeneration by removing MB were demonstrated.

Sign in / Sign up

Export Citation Format

Share Document