scholarly journals Synthesis of New Antibiotics Derivatives by the Photocatalytic Method: A Screening Research

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1102
Author(s):  
Wojciech Baran ◽  
Ewa Masternak ◽  
Dominika Sapińska ◽  
Andrzej Sobczak ◽  
Ewa Adamek
Keyword(s):  
Quantum Yield ◽  
Biologically Active ◽  
Quantum Yields ◽  
Photocatalytic Process ◽  
Experimental Conditions ◽  
New Antibiotics ◽  
Photocatalytic Reactions ◽  
Kinetics Of ◽  
Derivatives Of ◽  
Uva Radiation

The aim of our study was to assess the possibility of using the photocatalytic process conducted in the presence of TiO2 to obtain new stable derivatives of antibacterial drugs. The possibility of introducing hydroxyl, chlorine, or bromide groups into antibiotics molecules was investigated. The experiments were conducted in aqueous solutions in the presence of TiO2-P25 as a photocatalyst, Cl− and Br- ions, and antibiotics belonging to eight different chemical classes. All experiments were initiated by UVa radiation. The kinetics of photocatalytic reactions and their quantum yield were determined, and the stable products were identified. All of the antibiotics used in the experiments underwent a photocatalytic transformation, and the quantum yields were in the range from 0.63 to 22.3%. The presence of Br- or FeCl3 significantly increased the efficiency of the photocatalytic process performed in the presence of TiO2, although Br- ion also acted as an inhibitor. Potentially biologically active chlorine derivatives from Trimethoprim, Metronidazole, Chloramphenicol, and bromine derivatives from Trimethoprim, Amoxicillin were obtained under experimental conditions. The potentially inactive halogen derivatives of Sulfamethoxazole and hydroxyl derivatives described in the literature were also identified.

Coupling Kinetics of 4-Sulfobenzenediazonium Ion with 2,4-Thiazolidinedione, Its 3-Methyl Derivative and 3-Methyl-5-isoxazolone

1994 ◽  
Vol 59 (9) ◽  
pp. 2022-2028
Author(s):  
Jaromír Kaválek ◽  
Vladimír Macháček ◽  
Vojeslav Štěrba
Keyword(s):  
Kinetic Data ◽  
Coupling Reaction ◽  
Biologically Active ◽  
Methyl Derivative ◽  
Kinetics Of ◽  
Derivatives Of

3- and 4-substituted 5-phenylazo derivatives of 2,4-thiazolidinedione were prepared as potential biologically active fungicides. The kinetics of coupling of 4-sulfobenzenediazonium salt with 2,4-thiazolidinedione and 3-methyl-2,4-thiazolidinedione have been studied and the results have been compared with kinetic data of coupling reaction of 3-methyl-5-isoxazolone.

Effect of the concentration of 5,5'-dithiobis(2-nitrobenzoic acid) on parameters of the kinetics of its chemisorption on thiol derivatives of cellulose

1986 ◽  
Vol 51 (3) ◽  
pp. 545-552 ◽  
Author(s):  
Albert Breier ◽  
Peter Gemeiner ◽  
Milan J. Beneš
Keyword(s):  
Ethyl Cellulose ◽  
Chemical Structure ◽  
Sorption Process ◽  
Sorption Kinetics ◽  
Cellulose Derivatives ◽  
Experimental Conditions ◽  
Nitrobenzoic Acid ◽  
Kinetics Of ◽  
Derivatives Of ◽  
Sorbate Concentration

Equations describing the dependence of parameters of sorption kinetics on the sorbate concentration have been determined. The validity of the equations has been verified for the chemisorption of 5,5'-dithiobis(2-nitrobenzoic acid) on bead O-(2-mercaptoethyl)-, O-(3-mercapto-2-hydroxy-propyl)- and O-[2-(4-mercaptophenylsulfonyl)ethyl]cellulose. Isothermic constants obtained from the equations can be calculated also under experimental conditions unfavourable for their determination. These constants may be utilized for characterizing relations between the chemical structure of cellulose derivatives and the sorption process. The equation which provides a complete time-concentration description of sorption is suggested.

Terminology, relative photonic efficiencies and quantum yields in heterogeneous photocatalysis. Part I: Suggested protocol

1999 ◽  
Vol 71 (2) ◽  
pp. 303-320 ◽  
Author(s):  
Nick Serpone ◽  
Angela Salinaro
Keyword(s):  
Quantum Yield ◽  
Heterogeneous Photocatalysis ◽  
Standard Test ◽  
Process Efficiency ◽  
Quantum Yields ◽  
Light Sources ◽  
Experimental Conditions ◽  
Simple Description ◽  
Broadband Radiation ◽  
Test Molecule

The term photocatalysis is one amongst several in a quagmire of labels used to describe a photon-driven catalytic process; a simple description of photocatalysis is proposed herein. Other labels such as quantum yield and/or quantum efficiency used in solid/liquid and solid/gas hetero-geneous photocatalytic systems to express process efficiencies have come to refer (incorrectly) to the ratio of the rate of a given event to the rate of incident photons impinging on the reactor walls and typically for broadband radiation. There is no accord on the expression for process efficiency. At times quantum yield is defined; often, it is ill-defined and more frequently how it was assessed is not described. This has led to much confusion in the literature, not only because of its different meaning from homogeneous photochemistry, but also because the description of photon efficiency precludes comparison of results from different laboratories owing to variations in light sources, reactor geometries, and overall experimental conditions. The previously reported quantum yields are in fact apparent quantum yields, i.e. lower limits of the true quantum yields. We address this issue and argue that any reference to quantum yields or quantum efficiencies in a heterogeneous medium is inadvisable until the number of photons absorbed by the light harvester (the photocatalyst) is known. A practical and simple alternative is proposed for general use and in particular for processes employing complex reactor geometries: the concept of relative photonic efficiency (xr) is useful to compare process efficiencies using a given photocatalyst material and a given standard test molecule. A quantum yield can subsequently be calculated since f= xrfphenol, where fphenol denotes the quantum yield for the photocatalyzed oxidative transformation of phenol used as the standard secondary actinometer and Degussa P-25 TiO2 as the standard photocatalyst. For heterogeneous suspensions (only), an additional method to determine quantum yields f is also proposed.

scholarly journals Improved photodecarboxylation properties in zinc photocages constructed using m-nitrophenylacetic acid variants

2021 ◽  
Author(s):  
Austin Shigemoto ◽  
Avik Bhattacharjee ◽  
Erin Hickey ◽  
Hallee Boyd ◽  
Theresa McCormick ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Quantum Yield ◽  
Photophysical Properties ◽  
Quantum Yields ◽  
Biological Applications ◽  
High Quantum Yield ◽  
High Quantum ◽  
Derivatives Of ◽  
Fluoro Derivatives

The methoxy- and fluoro-derivatives of meta-nitrophenylacetic acid (mNPA) chromophores undergo photodecarboxylation with comparable quantum yields to unsubstituted mNPA, but uncage at red-shifted excitation wavelengths. This observation prompted us to investigate DPAdeCageOMe (2-[bis(pyridin-2-ylmethyl)amino]-2-(4-methoxy-3-nitrophenyl)acetic acid) and DPAdeCageF (2-[bis(pyridin-2-ylmethyl)amino]-2-(4-fluoro-3-nitrophenyl)acetic acid) as Zn2+ photocages. DPAdeCageOMe has a high quantum yield and exhibits other photophysical properties comparable to XDPAdeCage ({bis[(2-pyridyl)methyl]amino}(9-oxo-2-xanthenyl) acetic acid), the best perforiming Zn2+ photocage reported to date. Since the synthesis of DPAdeCageOMe is more straightforward than XDPACage, the new photocage will be a highly competitive tool for biological applications.

Relative Photonic Efficiencies and Quantum Yields in Heterogeneous Photocatalysis

1997 ◽  
Vol 2 (1) ◽  
Author(s):  
Nick Serpone
Keyword(s):  
Quantum Yield ◽  
Heterogeneous Medium ◽  
Heterogeneous Photocatalysis ◽  
Process Efficiency ◽  
Quantum Yields ◽  
Light Sources ◽  
Apparent Quantum Yield ◽  
Experimental Conditions ◽  
Broadband Radiation ◽  
Solid Liquid

AbstractQuantum yield and quantum efficiency (QY) as used in heterogeneous photocatalysis (solid/liquid or solid/gas systems) have too often been used incorrectly to mean the ratio of the rate of a given event to the rate of incident photons impinging on the (external) reactor walls, typicallyfor broadband radiation. There is little accord on how to express process efficiency. At times QY is defined, often ill-defined, and more frequently workers fail to describe how it was assessed. This has led to much confusion in the literature, not only because of its different meaning from homogeneous photochemistry but also because this method of describing photon efficiency precludes a comparison of results from different laboratories owing to variations in light sources, reactor geometries, and overall experimental conditions. It cannot be overemphasized that the reported QY is an apparent quantum yield, indeed a lower limit of the true quantum yield. This position paper addresses this issue and argues that any reference to quantum yields or quantum efficiencies in a heterogeneous medium is ill-advised unless the actual number of photons absorbed by the light harvester (the photocatalyst) has been determined. The extent of light scattering in a solid/liquid heterogeneous medium is significant. A practical and simple alternative to compare process efficiencies was recently (Serpone et al., J Photochem. Photobiol. A.Chem., 94 (1996) 191-203) suggested by defining a relative photonic efficiency (ζ

SOME DIRECTIONS IN THE MODIFICATION OF AZOLES

2020 ◽  
Vol 5 (443) ◽  
pp. 85-91
Author(s):  
Ibrayev M.K., ◽  
◽  
Takibayeva A.T., ◽  
Fazylov S.D., ◽  
Rakhimberlinova Zh.B., ◽  
...  
Keyword(s):  
13C Nmr Spectroscopy ◽  
Biologically Active Compounds ◽  
Biologically Active ◽  
Active Compounds ◽  
Synthesis Conditions ◽  
Alkaloid Cytisine ◽  
Azole Ring ◽  
Cyclic Compounds ◽  
New Compounds ◽  
Derivatives Of

This article presents studies on the targeted search for new derivatives of azoles, such as benzthiazole, 3,5-dimethylpyrazole, 1,3,4-oxadiazole-2-thione, 1,3,4-thiadiazole. The possibility of combining in one molecule of the azole ring with other cyclic compounds: the alkaloid cytisine, morpholine, furan and some arenes has been studied. To obtain new compounds, the reactions of bromination, acylation, and interaction with isothiocyanates were studied. Optimal synthesis conditions were studied for all reactions. It was found that the reaction of 4-bromo-3,5-dimethylpyrazole with isothiocyanates, in contrast to the previously written derivatives of anilines, takes a longer time and requires heating the reaction mixture. The combination of a pirasol fragment with halide substituents often results in an enhanced therapeutic effect. The synthesized 2-bromine-N-(6-rodanbenzo[d]thiazole-2-yl)acetamide, due to the alkylbromide group, is an important synth in the synthesis of new benzthiazole derivatives. Its derivatives combine in one molecule the rest of rhodanbenzthiazole with alkaloid cytisine and biogenic amine morpholine and are potentially biologically active compounds, since the molecule structure contains several pharmacophoric fragments: benzthiazole and alkaloid (amine) heterocycles, rhodane and urea groups. The mechanism of formation of 1,3,4-oxadiazole-2-tyons from hydrazides under action on them by carbon disulfide was studied and assumed. It was shown that dithiocarbamates in acidic medium decompose with the release of hydrogen sulfide and the formation of highly reactive isothiocyanate group. Then, intra-molecular cyclization occurs, with the formation of end products - 1,3,4-oxadiazole-2-thions. The structures of the synthesized compounds were studied by 1H and 13C NMR spectroscopy. All synthesized substances are potentially biologically active compounds, since they contain several pharmacophore fragments in their structure.

Cyclization and acid-catalyzed hydrolysis of O-benzoylbenzamidoximes

1986 ◽  
Vol 51 (12) ◽  
pp. 2786-2797
Author(s):  
František Grambal ◽  
Jan Lasovský
Keyword(s):  
Reaction Rate ◽  
Kinetic Isotope ◽  
Acid Base Equilibrium ◽  
Mineral Acids ◽  
Kinetics Of Formation ◽  
Acid Catalyzed ◽  
Ph Scale ◽  
Kinetics Of ◽  
Hydrolysis Of ◽  
Derivatives Of

Kinetics of formation of 1,2,4-oxadiazoles from 24 substitution derivatives of O-benzoylbenzamidoxime have been studied in sulphuric acid and aqueous ethanol media. It has been found that this medium requires introduction of the Hammett H0 function instead of the pH scale beginning as low as from 0.1% solutions of mineral acids. Effects of the acid concentration, ionic strength, and temperature on the reaction rate and on the kinetic isotope effect have been followed. From these dependences and from polar effects of substituents it was concluded that along with the cyclization to 1,2,4-oxadiazoles there proceeds hydrolysis to benzamidoxime and benzoic acid. The reaction is thermodynamically controlled by the acid-base equilibrium of the O-benzylated benzamidoximes.

scholarly journals Quantum-Chemical Search for Keto Tautomers of Azulenols in Vacuo and Aqueous Solution

Symmetry ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 497
Author(s):  
Ewa D. Raczyńska
Keyword(s):  
Aqueous Solution ◽  
Quantum Chemical ◽  
Biologically Active ◽  
Deprotonation Reaction ◽  
Chemical Studies ◽  
Quantum Chemical Studies ◽  
Scanty Information ◽  
Derivatives Of ◽  
Common Anion ◽  
Tautomeric Mixture

Keto-enol prototropic conversions for carbonyl compounds and phenols have been extensively studied, and many interesting review articles and even books appeared in the last 50 years. Quite a different situation takes place for derivatives of biologically active azulene, for which only scanty information on this phenomenon can be found in the literature. In this work, quantum-chemical studies have been undertaken for symmetrically and unsymmetrically substituted azulenols (constitutional isomers of naphthols). Stabilities of two enol (OH) rotamers and all possible keto (CH) tautomers have been analyzed in the gas phase {DFT(B3LYP)/6-311+G(d,p)} and also in aqueous solution {PCM(water)//DFT(B3LYP)/6-311+G(d,p)}. Contrary to naphthols, for which the keto forms can be neglected, at least one keto isomer (C1H, C2H, and/or C3H) contributes significantly to the tautomeric mixture of each azulenol to a higher degree in vacuo (non-polar environment) than in water (polar amphoteric solvent). The highest amounts of the CH forms have been found for 2- and 5-hydroxyazulenes, and the smallest ones for 1- and 6-hydroxy derivatives. The keto tautomer(s), together with the enol rotamers, can also participate in deprotonation reaction leading to a common anion and influence its acid-base properties. The strongest acidity in vacuo exhibits 6-hydroxyazulene, and the weakest one displays 1-hydroxyazulene, but all azulenols are stronger acids than phenol and naphthols. Bond length alternation in all DFT-optimized structures has been measured using the harmonic oscillator model of electron delocalization (HOMED) index. Generally, the HOMED values decrease for the keto tautomers, particularly for the ring containing the labile proton. Even for the keto tautomers possessing energetic parameters close to those of the enol isomers, the HOMED indices are low. However, some kind of parallelism exists for the keto forms between their relative energies and HOMEDs estimated for the entire molecules.

scholarly journals Ruthenium-based PACT agents based on bisquinoline chelates: synthesis, photochemistry, and cytotoxicity

2021 ◽  
Author(s):  
Anja Busemann ◽  
Ingrid Flaspohler ◽  
Xue-Quan Zhou ◽  
Claudia Schmidt ◽  
Sina K. Goetzfried ◽  
...  
Keyword(s):  
Quantum Yield ◽  
Singlet Oxygen ◽  
Cancer Cells ◽  
Cellular Uptake ◽  
Ruthenium Complex ◽  
Human Cancer ◽  
Light Irradiation ◽  
Quantum Yields ◽  
Light Activation ◽  
Human Cancer Cells

AbstractThe known ruthenium complex [Ru(tpy)(bpy)(Hmte)](PF6)2 ([1](PF6)2, where tpy = 2,2’:6’,2″-terpyridine, bpy = 2,2’-bipyridine, Hmte = 2-(methylthio)ethanol) is photosubstitutionally active but non-toxic to cancer cells even upon light irradiation. In this work, the two analogs complexes [Ru(tpy)(NN)(Hmte)](PF6)2, where NN = 3,3'-biisoquinoline (i-biq, [2](PF6)2) and di(isoquinolin-3-yl)amine (i-Hdiqa, [3](PF6)2), were synthesized and their photochemistry and phototoxicity evaluated to assess their suitability as photoactivated chemotherapy (PACT) agents. The increase of the aromatic surface of [2](PF6)2 and [3](PF6)2, compared to [1](PF6)2, leads to higher lipophilicity and higher cellular uptake for the former complexes. Such improved uptake is directly correlated to the cytotoxicity of these compounds in the dark: while [2](PF6)2 and [3](PF6)2 showed low EC50 values in human cancer cells, [1](PF6)2 is not cytotoxic due to poor cellular uptake. While stable in the dark, all complexes substituted the protecting thioether ligand upon light irradiation (520 nm), with the highest photosubstitution quantum yield found for [3](PF6)2 (Φ[3] = 0.070). Compounds [2](PF6)2 and [3](PF6)2 were found both more cytotoxic after light activation than in the dark, with a photo index of 4. Considering the very low singlet oxygen quantum yields of these compounds, and the lack of cytotoxicity of the photoreleased Hmte thioether ligand, it can be concluded that the toxicity observed after light activation is due to the photoreleased aqua complexes [Ru(tpy)(NN)(OH2)]2+, and thus that [2](PF6)2 and [3](PF6)2 are promising PACT candidates. Graphic abstract

Sign in / Sign up

Export Citation Format

Share Document