scholarly journals ZIF-8 Metal Organic Framework for the Conversion of Glucose to Fructose and 5-Hydroxymethyl Furfural

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 812 ◽  
Author(s):  
Ryan Oozeerally ◽  
Shivendra D. K. Ramkhelawan ◽  
David L. Burnett ◽  
Christiaan H. L. Tempelman ◽  
Volkan Degirmenci

Herein, Zeolitic imidazolate framework-8 (ZIF-8) is considered as an easy and cheap to prepare alternative catalyst for the isomerization of glucose and production of 5-hydroxymethyl furfural (HMF). For the synthesis of the ZIF-8 catalysts two preparation methods were evaluated, being room temperature and hydrothermal synthesis at 140 °C. Of these, the hydrothermal synthesis method yields a material with exceptionally high surface area (1967 m2·g−1). As a catalyst, the ZIF-8 materials generated excellent fructose yields. Specifically, ZIF-8 prepared by hydrothermal synthesis yielded a fructose selectivity of 65% with a glucose conversion of 24% at 100 °C in aqueous reaction medium. However, this selectivity dropped dramatically when the reactions were repeated at higher temperatures (~140 °C). Interestingly, greater quantities of mannose were produced at higher temperatures too. The lack of strong Brønsted acidity in both ZIF-8 materials resulted in poor HMF yields. In order to improve HMF yields, reactions were performed at a lower pH of 1.0. At 140 °C the lower pH was found to drive the reaction towards HMF and double its yield. Despite the excellent performance of ZIF-8 catalysts in batch reactions, their activity did not translate well to the flow reactor over a continuous run of 8 h, which was operating with a residence time of 6 min. The activity of ZIF-8 halved in the flow reactor at 100 °C in ~3 h, which implies that the catalyst’s stability was not maintained in the long run.

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Heng Zhang ◽  
Jing Zhong ◽  
Guoxiang Zhou ◽  
Junliang Wu ◽  
Zhenyu Yang ◽  
...  

A microporous metal-organic framework (MOF), cobalt-based zeolitic imidazolate framework-67 (ZIF-67), was synthesized by the combination of solvent-free hand-mill and microwave irradiation, without any organic solvent and within 30 minutes. The hand-milling process can mix the reactants well by the virtue of high moisture/water absorption capacity of reactants. In addition, the outstanding electromagnetic wave absorption capability of cobalt leads to efficient conversion to MOF structures before carbonization. The obtained ZIF-67 possesses high surface area and micropore volume.


2018 ◽  
Vol 11 (06) ◽  
pp. 1830006 ◽  
Author(s):  
Wenhui Shi ◽  
Xilian Xu ◽  
Lin Zhang ◽  
Wenxian Liu ◽  
Xiehong Cao

Metal-organic frameworks (MOFs) have attracted great attention as versatile precursors or sacrificial templates for the preparation of novel porous structures. Due to their tunable compositions, structures and porosities as well as high surface area, MOF-derived materials have revealed promising performance for energy storage devices. In this mini review, the recent progress of MOF-derived materials as electrodes of next-generation rechargeable batteries was summarized. We briefly introduce the preparation methods, various design strategies and the structure-dependent performance of recently reported MOF-derived materials as electrodes of post-lithium-ion batteries, focusing on lithium-sulfur (Li-S) batteries, sodium-ion batteries (SIBs) and metal–air batteries. Finally, we give the conclusion with some insights into future development of MOF-derived materials for next-generation rechargeable batteries.


2021 ◽  
Author(s):  
Bahareh ameri ◽  
Akbar Mohammadi Zardkhoshoui ◽  
Saied Saeed Hosseiny Davarani

Metal-organic frameworks (MOFs) derived nanoarchitectures have special features, such as high surface area (SA), abundant active sites, exclusive porous networks, and remarkable supercapacitive performance when compared to traditional nanoarchitectures. Herein,...


Antioxidants ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 426
Author(s):  
Vaibhav Kumar Maurya ◽  
Amita Shakya ◽  
Manjeet Aggarwal ◽  
Kodiveri Muthukaliannan Gothandam ◽  
Torsten Bohn ◽  
...  

Nanotechnology has opened new opportunities for delivering bioactive agents. Their physiochemical characteristics, i.e., small size, high surface area, unique composition, biocompatibility and biodegradability, make these nanomaterials an attractive tool for β-carotene delivery. Delivering β-carotene through nanoparticles does not only improve its bioavailability/bioaccumulation in target tissues, but also lessens its sensitivity against environmental factors during processing. Regardless of these benefits, nanocarriers have some limitations, such as variations in sensory quality, modification of the food matrix, increasing costs, as well as limited consumer acceptance and regulatory challenges. This research area has rapidly evolved, with a plethora of innovative nanoengineered materials now being in use, including micelles, nano/microemulsions, liposomes, niosomes, solidlipid nanoparticles, nanostructured lipids and nanostructured carriers. These nanodelivery systems make conventional delivery systems appear archaic and promise better solubilization, protection during processing, improved shelf-life, higher bioavailability as well as controlled and targeted release. This review provides information on the state of knowledge on β-carotene nanodelivery systems adopted for developing functional foods, depicting their classifications, compositions, preparation methods, challenges, release and absorption of β-carotene in the gastrointestinal tract (GIT) and possible risks and future prospects.


Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1598 ◽  
Author(s):  
Tahir Rasheed ◽  
Komal Rizwan ◽  
Muhammad Bilal ◽  
Hafiz M. N. Iqbal

Metal-organic frameworks (MOFs) are a fascinating class of porous crystalline materials constructed by organic ligands and inorganic connectors. Owing to their noteworthy catalytic chemistry, and matching or compatible coordination with numerous materials, MOFs offer potential applications in diverse fields such as catalysis, proton conduction, gas storage, drug delivery, sensing, separation and other related biotechnological and biomedical applications. Moreover, their designable structural topologies, high surface area, ultrahigh porosity, and tunable functionalities all make them excellent materials of interests for nanoscale applications. Herein, an effort has been to summarize the current advancement of MOF-based materials (i.e., pristine MOFs, MOF derivatives, or MOF composites) for electrocatalysis, photocatalysis, and biocatalysis. In the first part, we discussed the electrocatalytic behavior of various MOFs, such as oxidation and reduction candidates for different types of chemical reactions. The second section emphasizes on the photocatalytic performance of various MOFs as potential candidates for light-driven reactions, including photocatalytic degradation of various contaminants, CO2 reduction, and water splitting. Applications of MOFs-based porous materials in the biomedical sector, such as drug delivery, sensing and biosensing, antibacterial agents, and biomimetic systems for various biological species is discussed in the third part. Finally, the concluding points, challenges, and future prospects regarding MOFs or MOF-based materials for catalytic applications are also highlighted.


2018 ◽  
Vol 57 (35) ◽  
pp. 11460-11464 ◽  
Author(s):  
Stefan Barwe ◽  
Jonas Weidner ◽  
Steffen Cychy ◽  
Dulce M. Morales ◽  
Stefan Dieckhöfer ◽  
...  

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 419
Author(s):  
Hamza Ahmad Isiyaka ◽  
Khairulazhar Jumbri ◽  
Nonni Soraya Sambudi ◽  
Jun Wei Lim ◽  
Bahruddin Saad ◽  
...  

Drift deposition of emerging and carcinogenic contaminant dicamba (3,6-dichloro-2-methoxy benzoic acid) has become a major health and environmental concern. Effective removal of dicamba in aqueous medium becomes imperative. This study investigates the adsorption of a promising adsorbent, MIL-101(Cr) metal-organic framework (MOF), for the removal of dicamba in aqueous solution. The adsorbent was hydrothermally synthesized and characterized using N2 adsorption-desorption isotherms, Brunauer, Emmett and Teller (BET), powdered X-ray diffraction (XRD), Fourier Transformed Infrared (FTIR) and field emission scanning electron microscopy (FESEM). Adsorption models such as kinetics, isotherms and thermodynamics were studied to understand details of the adsorption process. The significance and optimization of the data matrix, as well as the multivariate interaction of the adsorption parameters, were determined using response surface methodology (RSM). RSM and artificial neural network (ANN) were used to predict the adsorption capacity. In each of the experimental adsorption conditions used, the ANN gave a better prediction with minimal error than the RSM model. The MIL-101(Cr) adsorbent was recycled six times to determine the possibility of reuse. The results show that MIL-101(Cr) is a very promising adsorbent, in particular due to the high surface area (1439 m2 g−1), rapid equilibration (~25 min), high adsorption capacity (237.384 mg g−1) and high removal efficiency of 99.432%.


2021 ◽  
Author(s):  
Yong-Mei Wang ◽  
Xinxin Zhang ◽  
Dingyi Yang ◽  
Liting Wu ◽  
Jiaojiao Zhang ◽  
...  

Abstract The high porosity, controllable size, high surface area, and chemical versatility of a metal-organic framework (MOF) enable it a good material for a triboelectric nanogenerator (TENG), and some MOFs have been incorporated in the fabrication of TENGs. However, the understanding of effects of MOFs on the energy conversion of a TENG is still lacking, which inhibits the improvement of the performance of MOF-based TENGs. Here, UiO-66-NH2 MOFs were found to significantly increase the power of a TENG and the mechanism was carefully examined. The electron-withdrawing ability of Zr-based UiO-66-family MOFs was enhanced by designing the amino functionalized 1,4-terephthalic acid (1,4-BDC) as ligand. The chemically modified UiO-66-NH2 was found to increase the surface roughness and surface potential of a composite film with MOFs embedded in polydimethylsiloxane (PDMS) matrix. Thus the total charges due to the contact electrification increased significantly. The composite-based TENG was found to be very durable and its output voltage and current were 4 times and 60 times higher than that of a PDMS-based TENG. This work revealed an effective strategy to design MOFs with excellent electron-withdrawing abilities for high-performance TENGs.


2013 ◽  
Vol 125 (43) ◽  
pp. 11492-11495 ◽  
Author(s):  
Ruirui Yun ◽  
Zhiyong Lu ◽  
Yi Pan ◽  
Xiaozeng You ◽  
Junfeng Bai

2014 ◽  
Vol 50 (26) ◽  
pp. 3450 ◽  
Author(s):  
Ronny Grünker ◽  
Volodymyr Bon ◽  
Philipp Müller ◽  
Ulrich Stoeck ◽  
Simon Krause ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document