scholarly journals Structural Color Control of CoFeB-Coated Nanoporous Thin Films

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1123
Author(s):  
Xiaomin Zhu ◽  
Cuicui Zhao ◽  
Weiwei Zhang ◽  
Bo Zhang ◽  
Mengtao Sun ◽  
...  

Unlike color dyes, structural colors only slightly fade during long-term usage. Here, structural colors were controllably achieved by constructing CoFeB photonic crystal layers on the surface of a nanoporous aluminum oxide (AAO) substrate by magnetron sputtering deposition. The resulting material showed a wide visible spectral response and achieved structural color control with a high resolution, high color purity, and saturation. The angle-dependent color changes of CoFeB@AAO films were further investigated by changing the incident light angle. The simulation results of the model are consistent with the experiments, which is significant in practical applications. This strategy may have great potential applications for solid structure color coatings, anti-counterfeiting and security, information storage, and electromagnetic sensors.

2012 ◽  
Vol 78 (7) ◽  
pp. 2092-2099 ◽  
Author(s):  
Betty Kientz ◽  
Peter Vukusic ◽  
Stephen Luke ◽  
Eric Rosenfeld

ABSTRACTIridescence is a property of structural color that is occasionally encountered in higher eukaryotes but that has been poorly documented in the prokaryotic kingdom. In the present work, we describe a marine bacterium, identified asCellulophaga lytica, isolated from the surface of an anemone, that exhibits bright green iridescent colonies under direct epi-illumination. This phenomenon has not previously been investigated in detail. In this study, color changes ofC. lyticacolonies were observed at various angles of direct illumination or observation. Its iridescent green appearance was dominant on various growth media. Red and violet colors were also discerned on colony edges. RemarkableC. lyticabacterial iridescence was revealed and characterized using high-resolution optical spectrometry. In addition to this, by culturing other bacterial strains to which various forms of faintly iridescent traits have previously been attributed, we identify four principal appearance characteristics of structural color in prokaryotes. A new general classification of bacterial iridescence is therefore proposed in this study. Furthermore, a specific separate class is described for iridescentC. lyticastrains because they exhibit what is so far a unique intense glitter-like iridescence in reflection.C. lyticais the first prokaryote discovered to produce the same sort of intense iridescence under direct illumination as that associated with higher eukaryotes, like some insects and birds. Due to the nature of bacterial biology, cultivation, and ubiquity, this discovery may be of significant interest for both ecological and nanoscience endeavors.


2020 ◽  
Vol 34 (14) ◽  
pp. 2050142
Author(s):  
Yunfan Hong ◽  
Yufang Lei ◽  
Xiaoming Fang ◽  
Xingyi Li ◽  
Wenlong Wen ◽  
...  

Structural colors engineering as a promising research area provides a high-resolution and environmental-friendly sustainable colors implementation. Here, metasurface-based concept was used to design waveguides and gratings of Si3N4 material on silicon dioxide substrates. The shift of reflection peaks can be controlled by structural parameters and efficiencies exceeded 90% with half height and width less than 10 nm. This induced structural color with superior saturation. Moreover, such nanostructures showed good sensitivity to polarization angle and incident angle of incident light. The proposed coloring devices look promising for applications in active color displays, imaging devices, and anti-counterfeiting and so on.


2021 ◽  
Author(s):  
Yan-Lei Lu ◽  
Wen-Long Lan ◽  
Wei Shi ◽  
Qionghua Jin ◽  
Peng Cheng

Photo-induced variation of magnetism from ligand-based electron transfer have been extensively studied because of their potential applications in magneto-optical memory devices, light-responsive switches, and high-density information storage materials. In this...


Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 949
Author(s):  
Jiali Yu ◽  
Cheng-Hao Lee ◽  
Chi-Wai Kan

In contrast to traditional pigment colors, structural colors have developed a great potential in practical applications, thanks to their unique nonfading and color tunable properties; especially amorphous photonic structures with noniridescent structural colors have attracted considerable attention and their applications have expanded to more fields. Herein, graphene oxide (GO) and reduced graphene oxide (RGO) enhanced noniridescent structural colors with excellent mechanical robustness were established by a time-saving approach named spray coating, which allows for rapid fabrication of angular independent structural colors by spraying different photonic spray paints (PSPs) to ensure color multiplicity that was adjusted by the silica nanoparticles (SiO2 NPs) sizes onto the substrates. The incorporation of poly(methyl methacrylate-butyl acrylate) (PMB) improved the adhesion existing among SiO2 inter-nanoparticles and between SiO2 NPs and the substrates, taking advantages of the low glass transition temperature (Tg) of butyl acrylate derivative polymer and made PMB embedded PSPs coated patterns being imparted with good mechanical robustness and abrasive resistance. The peculiar light adsorption of GO and RGO across visible light spectrum facilitate higher color saturation. The improvement in color saturation of GO and RGO doped PSPs is expected to boost the promising applications in structurally colored paintings, inks and other color-related optical fields.


2018 ◽  
Vol 73 (6) ◽  
pp. 559-563 ◽  
Author(s):  
Junyuan Dong ◽  
Guanxia Yu ◽  
Jingjing Fu ◽  
Min Luo ◽  
Wenwen Du

AbstractIn this paper, the light scattering properties for multiple silver-coated dielectric nanocylinders with the symmetrical distribution were investigated. Based on the transfer matrix method, we derive the general transmission and reflection coefficient matrices for multiple dielectric nanocylinders. When the incident light frequencies are less than the plasma frequencies, the surface plasmons (SPs) appear in the interface between the silver and dielectrics. Numerical simulations show that there are three peaks of absorption cross-section (ACS) in the relationship between the ACS and the frequencies of the incident light, when the distance between the silver-coated dielectric nanocylinders is chosen properly. These SPs resonance peaks are characterised as resonances intrinsic to the cylindrically periodic system corresponding to different inner cavity structures. These multi-resonant cavities may have potential applications in integrated devices, optical sensors and optical storage devices.


Author(s):  
Vandana ◽  
Navdeep Kaur

The digitalization has been challenged with the security and privacy aspects in each and every field. In addition to numerous authentication methods, biometrics has been popularized as it relies on one’s individual behavioral and physical characters. In this context, numerous unimodal and multimodal biometrics have been proposed and tested in the last decade. In this paper, authors have presented a comprehensive survey of the existing biometric systems while highlighting their respective challenges, advantage and limitations. The paper also discusses the present biometric technology market value, its scope, and practical applications in vivid sectors. The goal of this review is to offer a compact outline of various advances in biometrics technology with potential applications using unimodal and multimodal bioinformatics are discussed that would prove to offer a base for any biometric-based future research.


2020 ◽  
Vol 13 (4) ◽  
pp. 108-117
Author(s):  
Steven Reed ◽  
Richard K Simpson ◽  
Kevin J McGraw

Among the most ornate animal traits in nature are the angle-dependent (e.g. iridescent) structural colors of many fishes, damselflies, birds, beetles, and butterflies. Though we now have a solid understanding of the mechanisms that create angle-dependent coloration in several groups, we know little about whether pigmentary colors reflect light in an angle-dependent fashion or if similar or different mechanisms govern angle-dependent reflectance from pigmentary versus structural colors. Here for the first time we describe non-iridescent angle-dependent coloration from the tail and wing feathers of several parrot species (Aves: Psittaciformes). We employed a novel approach—by calculating chromatic and achromatic contrasts (in just noticeable differences, JNDs) of straight and angled measurements of the same feather patch—to test for perceptually relevant angle-dependent changes in coloration on dorsal and ventral feather surfaces. We found, among the 15 parrot species studied, significant angle dependence for seven of our eight feather JND parameters. We then measured micro-scale features on each side of feathers, including size and color of barbs and barbules, to attempt to predict interspecific variation in degree of angle-dependent reflectance. We found that barb height, plumage-color type (e.g. melanin, structural), and differences between barb-barbule coloration (measured using Euclidean distances) were the strongest predictors of angle-dependent coloration. Interestingly, there was no significant phylogenetic signal in any of the angle-dependence models tested. These findings deepen our views on the importance of microscopic feather features in the production of directional animal coloration, especially in tissues that are colored predominantly by pigments and appear to be statically colored.


2020 ◽  
Vol Volume 15 ◽  
pp. 4959-4967
Author(s):  
Xiaoyan Sun ◽  
Lingzi Liu ◽  
Hui Zou ◽  
Caixia Yao ◽  
Zhengyu Yan ◽  
...  

Nanomaterials ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1467
Author(s):  
Xing Li ◽  
Jing Tang ◽  
Jonathan Baine

Based on the binary phase Fresnel zone plate (FZP), a polarization-independent metasurface lens that is able to focus incident light with any polarization state, including circular, linear, and elliptical polarizations, has been proposed and investigated. We demonstrate that the metasurface lens consisting of metal subwavelength slits can operate in a wide bandwidth in the visible range, and has a higher focusing efficiency than that of an amplitude FZP lens without phase modulation. A multi-focus FZP metasurface lens has also been designed and investigated. The proposed lens can provide potential applications in integrated nanophotonic devices without polarization limitations.


2019 ◽  
Vol 7 (3) ◽  
pp. 644-651 ◽  
Author(s):  
Lijun Cai ◽  
Huan Wang ◽  
Yunru Yu ◽  
Feika Bian ◽  
Yu Wang ◽  
...  

Abstract Artificial micromotors have a demonstrated value in the biomedical area. Attempts to develop this technology tend to impart micromotors with novel functions to improve the values. Herein, we present novel structural color-barcode micromotors for the multiplex assays. We found that, by rapidly extracting solvent and assembling monodispersed nanoparticles in droplets, it could form stomatocyte colloidal crystal clusters, which not only showed striking structural colors and characteristic reflection peaks due to their ordered nanoparticles arrangement, but also provided effective cavities for the integration of functional elements. Thus, the micromotors with catalysts or magnetic elements in their cavities, as well as with the corresponding structural color coding, could be achieved by using the platinum and ferric oxide dispersed pre-gel to fill and duplicate the stomatocyte colloidal crystal clusters. We have demonstrated that the self-movement of these structural color-barcode micromotors could efficiently accelerate the mixing speed of the detection sample and greatly increase the probe–target interactions towards faster and more sensitive single or multiplex detection, and the magnetism of these barcode micromotors enables the flexible collection of the micromotors, which could facilitate the detection processes. These features make the stomatocyte structural color-barcode micromotors ideal for biomedical applications.


Sign in / Sign up

Export Citation Format

Share Document