scholarly journals Discovery of Disulfane (H2S2) in Fluid Inclusions in Rubies from Yuanjiang, China, and Its Implications

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1305
Author(s):  
Wenqing Huang ◽  
Pei Ni ◽  
Jungui Zhou ◽  
Ting Shui ◽  
Junying Ding ◽  
...  
Keyword(s):  
Raman Spectra ◽  
Fluid Inclusions ◽  
Elemental Sulfur ◽  
Elevated Temperatures ◽  
Red River ◽  
Sedimentary Sequence ◽  
Geological Samples ◽  
Metamorphic Belt ◽  
Facies Metamorphism

Raman spectra of fluid inclusions in gem rubies from Yuanjiang deposit (China) within the Ailao Shan-Red River (ASRR) metamorphic belt showed the presence of compounds such as CO2, COS, CH4, H2S, and elemental sulfur (S8), accompanied by two bands at approximately 2499 and 2570 cm−1. These two frequencies could be assigned to the vibrations of disulfane (H2S2). This is the second case of the sulfane-bearing fluid inclusions in geological samples reported, followed by the first in quartzite from Bastar Craton of India. The H2S2 was likely in situ enclosed by the host rubies rather than a reaction product that formed during the cooling of H2S and S8, suggesting sulfanes are stable at elevated temperatures (e.g., >600 °C). By comparing the lithologies and metamorphic conditions of these two sulfane-bearing cases (Bastar and Yuanjiang), it is suggested that amphibolite facies metamorphism of sedimentary sequence that deposited in a continental platform setting might favor the generation of sulfanes. Sulfanes may play an important role in the mobilization of Cr that is essential for ruby crystallization.

Electron and ion irradiation-induced dissolution of mechanical twins in the intermetalic U3Si: An in situ HVEM study

1989 ◽  
Vol 47 ◽  
pp. 652-653
Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher
Keyword(s):  
Elevated Temperatures ◽  
Ion Irradiation ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Heavy Ion ◽  
High Energy ◽  
Mechanical Twinning ◽  
In Situ Experiments

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

The threshold energy for atom displacement in fcc metals

1990 ◽  
Vol 48 (4) ◽  
pp. 530-531
Author(s):  
Wilfried Sigle ◽  
Matthias Hohenstein ◽  
Alfred Seeger
Keyword(s):  
Growth Rate ◽  
Elevated Temperatures ◽  
Threshold Energy ◽  
Dislocation Loops ◽  
Absolute Minimum ◽  
Voltage Electron ◽  
Atom Displacement ◽  
Electron Microscopes ◽  
Fcc Metal

Prolonged electron irradiation of metals at elevated temperatures usually leads to the formation of large interstitial-type dislocation loops. The growth rate of the loops is proportional to the total cross-section for atom displacement,which is implicitly connected with the threshold energy for atom displacement, Ed . Thus, by measuring the growth rate as a function of the electron energy and the orientation of the specimen with respect to the electron beam, the anisotropy of Ed can be determined rather precisely. We have performed such experiments in situ in high-voltage electron microscopes on Ag and Au at 473K as a function of the orientation and on Au as a function of temperature at several fixed orientations.Whereas in Ag minima of Ed are found close to <100>,<110>, and <210> (13-18eV), (Fig.1) atom displacement in Au requires least energy along <100>(15-19eV) (Fig.2). Au is thus the first fcc metal in which the absolute minimum of the threshold energy has been established not to lie in or close to the <110> direction.

In Situ Polymerized Protic Ionogels for Fuel Cells at Elevated Temperatures

2021 ◽  
Author(s):  
Mengdou Zou ◽  
Jie Luo ◽  
Xurui Wang ◽  
Shuai Tan ◽  
Caihong Wang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Elevated Temperatures

scholarly journals Ultraviolet Absorption Cross-Sections of Ammonia at Elevated Temperatures for Nonintrusive Quantitative Detection in Combustion Environments

2021 ◽  
pp. 000370282199044
Author(s):  
Wubin Weng ◽  
Shen Li ◽  
Marcus Aldén ◽  
Zhongshan Li
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Absorption Cross Section ◽  
Elevated Temperatures ◽  
Uv Absorption ◽  
Energy Utilization ◽  
Quantitative Detection ◽  
Absorption Cross ◽  
Hot Gas

Ammonia (NH3) is regarded as an important nitrogen oxides (NOx) precursor and also as an effective reductant for NOx removal in energy utilization through combustion, and it has recently become an attractive non-carbon alternative fuel. To have a better understanding of thermochemical properties of NH3, accurate in situ detection of NH3 in high temperature environments is desirable. Ultraviolet (UV) absorption spectroscopy is a feasible technique. To achieve quantitative measurements, spectrally resolved UV absorption cross-sections of NH3 in hot gas environments at different temperatures from 295 K to 590 K were experimentally measured for the first time. Based on the experimental results, vibrational constants of NH3 were determined and used for the calculation of the absorption cross-section of NH3 at high temperatures above 590 K using the PGOPHER software. The investigated UV spectra covered the range of wavelengths from 190 nm to 230 nm, where spectral structures of the [Formula: see text] transition of NH3 in the umbrella bending mode, v2, were recognized. The absorption cross-section was found to decrease at higher temperatures. For example, the absorption cross-section peak of the (6, 0) vibrational band of NH3 decreases from ∼2 × 10−17 to ∼0.5 × 10−17 cm2/molecule with the increase of temperature from 295 K to 1570 K. Using the obtained absorption cross-section, in situ nonintrusive quantification of NH3 in different hot gas environments was achieved with a detection limit varying from below 10 parts per million (ppm) to around 200 ppm as temperature increased from 295 K to 1570 K. The quantitative measurement was applied to an experimental investigation of NH3 combustion process. The concentrations of NH3 and nitric oxide (NO) in the post flame zone of NH3–methane (CH4)–air premixed flames at different equivalence ratios were measured.

scholarly journals The Fluoride Anion-Catalyzed Sulfurization of Thioketones with Elemental Sulfur Leading to Sulfur-Rich Heterocycles: First Sulfurization of Thiochalcones

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 822
Author(s):  
Grzegorz Mlostoń ◽  
Jakub Wręczycki ◽  
Katarzyna Urbaniak ◽  
Dariusz M. Bieliński ◽  
Heinz Heimgartner
Keyword(s):  
Elemental Sulfur ◽  
Fluoride Anion ◽  
Ring Size ◽  
Mild Conditions ◽  
Tetrabutylammonium Fluoride ◽  
Cesium Fluoride ◽  
Secondary Reactions ◽  
Derivatives Of

Fluoride anion was demonstrated as a superior activator of elemental sulfur (S8) to perform sulfurization of thioketones leading to diverse sulfur-rich heterocycles. Due to solubility problems, reactions must be carried out either in THF using tetrabutylammonium fluoride (TBAF) or in DMF using cesium fluoride (CsF), respectively. The reactive sulfurizing reagents are in situ generated, nucleophilic fluoropolysulfide anions FS(8−x)−, which react with the C=S bond according to the carbophilic addition mode. Dithiiranes formed thereby, existing in an equilibrium with the ring-opened form (diradicals/zwitterions) are key-intermediates, which undergo either a step-wise dimerization to afford 1,2,4,5-tetrathianes or an intramolecular insertion, leading in the case of thioxo derivatives of 2,2,4,4-tetramethylcyclobutane-1,3-dione to ring enlarged products. In reactions catalyzed by TBAF, water bounded to fluoride anion via H-bridges and forming thereby its stable hydrates is involved in secondary reactions leading, e.g., in the case of 2,2,4,4-tetramethyl-3-thioxocyclobutanone to the formation of some unexpected products such as the ring enlarged dithiolactone and ring-opened dithiocarboxylate. In contrast to thioketones, the fluoride anion catalyzed sulfurization of their α,β-unsaturated analogues, i.e., thiochalcones is slow and inefficient. However, an alternative protocol with triphenylphosphine (PPh3) applied as a catalyst, offers an attractive approach to the synthesis of 3H-1,2-dithioles via 1,5-dipolar electrocyclization of the in situ-generated α,β-unsaturated thiocabonyl S-sulfides. All reactions occur under mild conditions and can be considered as attractive methods for the preparation of sulfur rich heterocycles with diverse ring-size.

In-Situ Characterization of Growth and Intermixing at a Heteroepitaxial Interface: Fe on Au(001)

1993 ◽  
Vol 318 ◽  
Author(s):  
Q. Jiang ◽  
A. Chan ◽  
Y.-L. He ◽  
G.-C. Wang
Keyword(s):  
Elevated Temperatures ◽  
Chemical Elements ◽  
Background Intensity ◽  
In Situ Characterization ◽  
Initial Stage ◽  
Monolayer Growth ◽  
Low Energy Electron ◽  
Energy Dependent

ABSTRACTThe growth and chemical intermixing of submonolayer and a few monolayer thick Fe films on a Au(001) surface was studied by High Resolution Low Energy Electron Diffraction (HRLEED) technique. Through the analysis of the energy dependent angular profiles as a function of time, we obtained the distribution of islands and distribution of spacings during submonolayer growth. The interference of electron waves from different chemical elements in terraces at different heights in the surface contributes to the background intensity and broadening in the angular profiles of diffraction beams. A subsurface Fe capped by Au islands as a result of atomic place exchange was observed at the initial stage of monolayer growth. From the energy dependent angular profiles as a function of temperature, we determine the quantitative change of inhomogeneity length (∼20 Å) at the interface of ultrathin films at elevated temperatures due to intermixing.

scholarly journals Pyrobaculum yellowstonensis Strain WP30 Respires on Elemental Sulfur and/or Arsenate in Circumneutral Sulfidic Geothermal Sediments of Yellowstone National Park

2015 ◽  
Vol 81 (17) ◽  
pp. 5907-5916 ◽  
Author(s):  
Z. J. Jay ◽  
J. P. Beam ◽  
A. Dohnalkova ◽  
R. Lohmayer ◽  
B. Bodle ◽  
...  
Keyword(s):  
Yellowstone National Park ◽  
National Park ◽  
Elemental Sulfur ◽  
De Novo ◽  
Hot Spring ◽  
Content Type ◽  
Physiological Attributes ◽  
And Function ◽  
Metagenome Sequence

ABSTRACTThermoproteales(phylumCrenarchaeota) populations are abundant in high-temperature (>70°C) environments of Yellowstone National Park (YNP) and are important in mediating the biogeochemical cycles of sulfur, arsenic, and carbon. The objectives of this study were to determine the specific physiological attributes of the isolatePyrobaculum yellowstonensisstrain WP30, which was obtained from an elemental sulfur sediment (Joseph's Coat Hot Spring [JCHS], 80°C, pH 6.1, 135 μM As) and relate this organism to geochemical processes occurringin situ. Strain WP30 is a chemoorganoheterotroph and requires elemental sulfur and/or arsenate as an electron acceptor. Growth in the presence of elemental sulfur and arsenate resulted in the formation of thioarsenates and polysulfides. The complete genome of this organism was sequenced (1.99 Mb, 58% G+C content), revealing numerous metabolic pathways for the degradation of carbohydrates, amino acids, and lipids. Multiple dimethyl sulfoxide-molybdopterin (DMSO-MPT) oxidoreductase genes, which are implicated in the reduction of sulfur and arsenic, were identified. Pathways for thede novosynthesis of nearly all required cofactors and metabolites were identified. The comparative genomics ofP. yellowstonensisand the assembled metagenome sequence from JCHS showed that this organism is highly related (∼95% average nucleotide sequence identity) toin situpopulations. The physiological attributes and metabolic capabilities ofP. yellowstonensisprovide an important foundation for developing an understanding of the distribution and function of these populations in YNP.

An in situ microtomography apparatus with a laboratory x-ray source for elevated temperatures of up to 1000 °C

2021 ◽  
Vol 92 (3) ◽  
pp. 033704
Author(s):  
Rongqi Zhu ◽  
Zhaoliang Qu ◽  
Shuo Yang ◽  
Daining Fang
Keyword(s):  
Elevated Temperatures ◽  
X Ray

Pressure and Temperature Adaptation of Cytosolic Malate Dehydrogenases of Shallowand Deep-Living Marine Invertebrates: Evidence for High Body Temperatures in Hydrothermal Vent Animals

1991 ◽  
Vol 159 (1) ◽  
pp. 473-487 ◽  
Author(s):  
ELIZABETH DAHLHOFF ◽  
GEORGE N. SOMERO
Keyword(s):  
Deep Sea ◽  
Hydrothermal Vents ◽  
Elevated Temperatures ◽  
Marine Invertebrates ◽  
Distribution Patterns ◽  
Pressure Effects ◽  
Temperature Adaptation ◽  
Body Temperatures ◽  
Elevated Pressures

Effects of temperature and hydrostatic pressure were measured on cytosolic malate dehydrogenases (cMDHs) from muscle tissue of a variety of shallow- and deep-living benthic marine invertebrates, including seven species endemic to the deep-sea hydrothermal vents. The apparent Michaelis-Menten constant (Km) of coenzyme (nicotinamide adenine dinucleotide, NADH), used to index temperature and pressure effects, was conserved within a narrow range (approximately 15–25 μmoll−1) at physiological temperatures and pressures for all species. However, at elevated pressures, the Km of NADH rose sharply for cMDHs of shallow species (depths of occurrence &gt;Approximately 500 m), but not for the cMDHs of deep-sea species. Cytosolic MDHs of invertebrates from the deep-sea hydrothermal vents generally were not perturbed by elevated temperatures (15–25°C) at in situ pressures, but cMDHs of cold-adapted deep-sea species were. At a single measurement temperature, the Km of NADH for cMDHs from invertebrates from habitats with well-characterized temperatures was inversely related to maximal sustained body temperature. This correlation was used to predict the maximal sustained body temperatures of vent invertebrates for which maximal habitat and body temperatures are difficult to estimate. Species occurring on the ‘smoker chimneys’, which emit waters with temperatures up to 380°C, are predicted to have sustained body temperatures that are approximately 20–25°C higher than vent species living in cooler vent microhabitats. We conclude that, just as adaptation of enzymes to elevated pressures is important in establishing species’ depth distribution patterns, adaptation of pressure-adapted enzymes to temperature is critical in enabling certain vent species to exploit warm-water microhabitats in the vent environment.

Sign in / Sign up

Export Citation Format

Share Document