Field Study of Low-Energy Long-Distance Wireless Communication for IoT Application in Remote Areas

Mekatronika ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 52-62
Author(s):  
Kwai Yang Sak ◽  
Ahmad Najmuddin Ibrahim

Long Range (LoRa) is a wireless radio frequency technology under the Low Power Wide Area Network (LPWAN). LoRa is able to communicate long range and low energy consumption. The communication range has become an essential element in the wireless radio frequency technology in the Internet of Things (IoT). The presence of LoRa is able IoT application performs in long communication distances with high noise sensitivity ability. People can operate, monitor, and do a variety of tasks from a remote distance. Therefore, this research aims to evaluate the performance of the LoRa connection between radio transceivers in remote locations. The different environment and structural elements affect the LoRa performance. This thesis will be supported by the experiment that LoRa communication in different environments and tests. This experiment tests in line of sight (LOS) and non-line of sight (NLOS). Two sets of LoRa parameters, including Spreading Factor (SF), Bandwidth, and coding rate, are tested in different environments. The experiment tests the LoRa performance in various aspects: received signal strength indicator (RSSI) and packet received ratio (PPR) at different coverage ranges. In addition, the LoRa performance is evaluated in university, residential areas and vegetation areas under similar temperature, weather, and time. The LoRa coverage distance in the vegetation area and university area is reached 900 meters in the LOS test. Still, the vegetation area's signal is more stable and able to receive weaker RSSI signals. The LoRa coverage distance in the NLOS test is shorter compared to the LOS test. NLOS test has only one-third of the LOS LoRa communication distance. It is due to the signal penetration on structural elements such as buildings and woods cause the signal power loss and only transmitting a shorter distance. The LoRa parameter with SF9, 31.25kHz bandwidth and 4/8 coding rate has a better coverage range and stable connection.

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.


2021 ◽  
Author(s):  
Evjola Spaho ◽  
Aleksandër Biberaj ◽  
Ares Tahiraga

AbstractRecently, low power wide area networks are attracting a lot of attention by the research community. They are wireless technologies characterized by large coverage area, low bandwidth and long battery life. One of these low power wide area networks technologies, the long range wide area network, can be used for different monitoring applications for health, agriculture, traffic, smart city.In this paper, different simulations and experiments are conducted to implement a low-cost long-range wide area network environmental monitoring application for Tirana city in Albania. Simulation and experimental data are compared and similar results were obtained. In the low-cost implemented system, the gateway can communicate with the sensors placed in strategic positions with long distance covered also using Radio Mobile software.


Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Nur-A-Alam ◽  
Mominul Ahsan ◽  
Md. Abdul Based ◽  
Julfikar Haider ◽  
Eduardo M. G. Rodrigues

In the era of Industry 4.0, remote monitoring and controlling appliance/equipment at home, institute, or industry from a long distance with low power consumption remains challenging. At present, some smart phones are being actively used to control appliances at home or institute using Internet of Things (IoT) systems. This paper presents a novel smart automation system using long range (LoRa) technology. The proposed LoRa based system consists of wireless communication system and different types of sensors, operated by a smart phone application and powered by a low-power battery, with an operating range of 3–12 km distance. The system established a connection between an android phone and a microprocessor (ESP32) through Wi-Fi at the sender end. The ESP32 module was connected to a LoRa module. At the receiver end, an ESP32 module and LoRa module without Wi-Fi was employed. Wide Area Network (WAN) communication protocol was used on the LoRa module to provide switching functionality of the targeted area. The performance of the system was evaluated by three real-life case studies through measuring environmental temperature and humidity, detecting fire, and controlling the switching functionality of appliances. Obtaining correct environmental data, fire detection with 90% accuracy, and switching functionality with 92.33% accuracy at a distance up to 12 km demonstrated the high performance of the system. The proposed smart system with modular design proved to be highly effective in controlling and monitoring home appliances from a longer distance with relatively lower power consumption.


BWK ENERGIE. ◽  
2019 ◽  
Vol 71 (01-02) ◽  
pp. 24-25
Author(s):  
Alexander Sommer

IOT | Das Internet der Dinge (IoT) ist bei Stadtwerken zum Trendthema avanciert. Die items GmbH aus Münster, Full-Service-IT-Dienstleister für die Versorgungsbranche, baut aktuell ein interdisziplinäres IoT-Team auf, um Stadtwerke beim Aufbau und Betrieb von Infrastrukturen im Bereich der Long-Range-Wide-Area-Network (LoRaWAN)-Technologie unterstützen zu können. Im Gespräch mit BWK erläutert Alexander Sommer, Leiter Innovation & Transformation, die Strategie von items.


Author(s):  
Deniz TAŞKIN ◽  
Selçuk YAZAR

The Internet of Things (IoT) applications has been developing greatly in recent years to solve communication problems, especially in rural areas. Within the IoT, the context-awareness paradigm, especially in precision agricultural practices, has come to a state of the planning of production time. As smart cities approach, the smart environment approach also increases its place in IoT applications and has dominated research in recent years in literature. In this study, soil and environmental information were collected in 17 km diameter in rural area with developed Long Range (LoRa) based context-aware platform. With the developed sensor and actuator control unit, soil moisture at 5 cm and 30 cm depth and soil surface temperature information were collected and the communication performance was investigated. During the study, the performance measurements of the developed Serial Peripheral Interface (SPI) enabled Long Range Wide Area Network (LoRaWAN) gateway were also performed.


2017 ◽  
Vol 2 (3) ◽  
pp. 112-119 ◽  
Author(s):  
Om-Kolsoom Shahryari ◽  
Amjad Anvari-Moghaddam ◽  
Shadi Shahryari

The smart grid, as a communication network, allows numerous connected devices such as sensors, relays and actuators to interact and cooperate with each other. An Internet-based solution for electricity that provides bidirectional flow of information and power is internet of energy (IoE) which is an extension of smart grid concept. A large number of connected devices and the huge amount of data generated by IoE and issues related to data transmission, process and storage, force IoE to be integrated by cloud computing. Furthermore, in order to enhance the performance and reduce the volume of transmitted data and process information in an acceptable time, fog computing is suggested as a layer between IoE layer and cloud layer. This layer is used as a local processing level that leads to reduction in data transmissions to the cloud. So, it can save energy consumption used by IoE devices to transmit data into cloud because of a long range, low power, wide area and low bit rate wireless telecommunication system which is called LoRaWAN. All devices in fog domain are connected by long range wide area network (LoRa) into a smart gateway.  The gateway which bridges fog domain and cloud, is introduced for scheduling devices/appliances by creating a priority queue which can perform demand side management dynamically. The queue is affected by not only the consumer importance but also the consumer policies and the status of energy resources.


2019 ◽  
Vol 5 (2) ◽  
pp. 83-92 ◽  
Author(s):  
Eko Didik Widianto ◽  
Al Arthur Faizal ◽  
Dania Eridani ◽  
Richard Dwi Olympus Augustinus ◽  
Michael SM Pakpahan

Standar terbuka pada sistem komunikasi LoRa (Long Range) menyebabkan perbedaan cara implementasi dalam setiap penggunaannya. LoRaWAN (Long Range Wide Area Network) sebagai protokol bawaan LoRa masih mempunyai beberapa kekurangan yang menyebabkannya kurang efektif untuk diimplementasikan pada sistem tertentu. Penelitian ini mengembangkan protokol SLP (Simple LoRa Protocol) sebagai alternatif protokol komunikasi dan arsitektur jaringan yang didesain berdasarkan kekurangan yang dimiliki oleh LoRaWAN. Protokol ini mendefinisikan format data dan proses komunikasi antara client dan gateway dalam mode setup untuk pendaftaran node secara mandiri dan polling untuk transaksi data. Proses setup mampu mengenali node dengan konfigurasi sensor beragam dan dapat mengirmkan data dari node ke gateway dengan baik. Hasil pengujian menunjukkan bahwa SLP menghasilkan peningkatan performa QoS dalam throughput dan packet loss dari LoRaWAN menggunakan modulasi yang sama.


BWK ENERGIE. ◽  
2019 ◽  
Vol 71 (05) ◽  
pp. 20-21

IOT-NETZE | Die Minol Zenner Connect GmbH bietet Stadtwerken und Industriebetrieben Unterstützung beim Long-Range-Wide-Area-Network (LoRaWAN)-Aufbau an. Das neue Unternehmen hat sich ein ambitioniertes Ziel gesteckt: Lokale Infrastrukturen sollen deutschlandweit zu einem möglichst flächendeckenden Funknetz verknüpft werden.


Author(s):  
Hongqiang Li ◽  
Dongyan Zhao ◽  
Xiaoke Tang ◽  
Jie Gan ◽  
Xu Zhao ◽  
...  

With the rapid development of IoT technology in recent years, higher requirements have been put forward for wireless communication technology. Low Power Wide Area Network (LPWAN) technology is emerging rapidly, the technology is characterized by low power consumption, low bandwidth, long-distance, and a large number of connections, and is specifically designed for Internet of Things applications. LoRa (Low Power Long Range Transceiver), as a typical representative of LPWAN technology, has been widely concerned and studied. This paper analyzes the performance of LoRa modulation in the tree topology network and analyzes the performance of LoRa modulation in the imperfect environment for point-to-point communication and multipoint-to-point communication. From theoretical analysis and performance simulation, it can be seen that the influence of frequency offset or multipath fading on LoRa signal is very obvious. However, when LoRa modulation is used for networking, multi-user interference will be introduced. Under the influence of many imperfect factors, the signal receiver performance of LoRa modulation will be difficult to guarantee. Because of these effects, Coordinated Multiple Points based on Timing Delay (DCoMP) is presented. Multiple nodes close to each other send the same data to the target node. Due to the inaccurate synchronization between nodes, there will be a certain relative delay when sending signals to the same target node. After the receiving node combines the signals of multiple nodes according to different relative delays, the reception performance of the signals can be improved. At the same time, the cooperative node can also actively adjust the signal sending time to improve the reception performance of the receiving node signal merging algorithm. LoRa modulation, by using DCoMP transmission, improves the reception of signals and thus the overall capacity of the system. Through the analysis of multipoint communication and single point communication, this paper is of great help to LoRa network deployment.


Sign in / Sign up

Export Citation Format

Share Document