scholarly journals The Study of Bending and Twisting Input Modalities in Deformable Interfaces

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2991
Author(s):  
Jibin Yin ◽  
Shujie Bai ◽  
Yi Han ◽  
Xiangliang Zhang ◽  
Siyang Deng ◽  
...  
Keyword(s):  
Visual Feedback ◽  
Control Level ◽  
Interactive Technology ◽  
Input Device ◽  
Flexible Display ◽  
Degree Of Deformation ◽  
Experimental Performance ◽  
Evaluation Indexes ◽  
Selection Strategies ◽  
Further Development

The deformable input provides users with the ability of physical operation equipment to interact with the system. In order to facilitate further development in flexible display interactive technology, we devised FlexSheet, an input device that can simulate the deformation environment. This paper presents two forms of deformation input, bending and twisting, with regard to three selection techniques. We conduct a controlled experiment to select discrete targets by combining two input forms and three selection strategies, taking into account the influence of visual feedback. Further, we use the deformation angle to reflect the degree of deformation and map it to the experimental variables. In accordance with the experimental results, we analyze the experimental performance under three evaluation indexes and prove the viability of our selection technology in bending and twisting input modes. Finally, we provide suggestions on the control level in bending and twisting input modes, respectively.

scholarly journals A UWB-Driven Self-Actuated Projector Platform for Interactive Augmented Reality Applications

2021 ◽  
Vol 11 (6) ◽  
pp. 2871
Author(s):  
Ahmed Elsharkawy ◽  
Khawar Naheem ◽  
Dongwoo Koo ◽  
Mun Sang Kim
Keyword(s):  
Augmented Reality ◽  
Interaction Design ◽  
Rapid Development ◽  
Interactive Technology ◽  
Ultra Wideband ◽  
Wireless Sensor ◽  
Interactive System ◽  
Input Device ◽  
Reasonable Accuracy ◽  
Calibration Algorithm

With the rapid development of interactive technology, creating systems that allow users to define their interactive envelope freely and provide multi-interactive modalities is important to build up an intuitive interactive space. We present an indoor interactive system where a human can customize and interact through a projected screen utilizing the surrounding surfaces. An ultra-wideband (UWB) wireless sensor network was used to assist human-centered interaction design and navigate the self-actuated projector platform. We developed a UWB-based calibration algorithm to facilitate the interaction with the customized projected screens, where a hand-held input device was designed to perform mid-air interactive functions. Sixteen participants were recruited to evaluate the system performance. A prototype level implementation was tested inside a simulated museum environment, where a self-actuated projector provides interactive explanatory content for the on-display artifacts under the user’s command. Our results depict the applicability to designate the interactive screen efficiently indoors and interact with the augmented content with reasonable accuracy and relatively low workload. Our findings also provide valuable user experience information regarding the design of mobile and projection-based augmented reality systems, with the ability to overcome the limitations of other conventional techniques.

scholarly journals Use of an online virtual environment in psychiatric problem-based learning

2012 ◽  
Vol 36 (10) ◽  
pp. 391-396 ◽  
Author(s):  
Jeremy Rampling ◽  
Aileen O'Brien ◽  
Keelyjo Hindhaugh ◽  
Luke Woodham ◽  
Sheetal Kavia
Keyword(s):  
Virtual Environment ◽  
Second Life ◽  
Online Survey ◽  
Real Life ◽  
Interactive Technology ◽  
Psychiatric Training ◽  
Psychotic Symptoms ◽  
Psychiatric Education ◽  
Educational Value ◽  
Further Development

Aims and methodTo create a simulated patient with psychosis for psychiatric training within the online virtual environment of Second Life. After design and delivery of the scenario, medical students were asked to complete it and provide feedback.ResultsA total of 24 students tried the scenario and gave feedback via an online survey. The project had been offered to 150 students so the take up was low. The feedback was predominantly negative with 53 critical responses to 32 positive ones. The consensus was that the scenario was cumbersome, did not imitate real life and was of little educational value. Multimedia representations of psychotic symptoms were more positively received and there may be scope for further development.Clinical implicationsInteractive technology has a role in psychiatric education but we would not recommend the use of scenarios that rely predominantly on verbal communication within Second Life.

scholarly journals Improving Vision-Based Motor Rehabilitation Interactive Systems for Users with Disabilities Using Mirror Feedback

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Antoni Jaume-i-Capó ◽  
Pau Martínez-Bueso ◽  
Biel Moyà-Alcover ◽  
Javier Varona
Keyword(s):  
Cerebral Palsy ◽  
Visual Feedback ◽  
User Study ◽  
Interactive Systems ◽  
The Body ◽  
Input Device ◽  
Motor Rehabilitation ◽  
Feedback Mechanisms ◽  
Paired Samples ◽  
Within Subjects

Observation is recommended in motor rehabilitation. For this reason, the aim of this study was to experimentally test the feasibility and benefit of including mirror feedback in vision-based rehabilitation systems: we projected the user on the screen. We conducted a user study by using a previously evaluated system that improved the balance and postural control of adults with cerebral palsy. We used a within-subjects design with the two defined feedback conditions (mirrorandno-mirror) with two different groups of users (8with disabilitiesand 32without disabilities) using usability measures (time-to-start(Ts) andtime-to-complete(Tc)). A two-tailed paired samplest-test confirmed that in case of disabilities the mirror feedback facilitated the interaction in vision-based systems for rehabilitation. The measured times were significantly worse in the absence of the user’s own visual feedback (Ts=7.09(P<0.001) andTc=4.48(P<0.005)). In vision-based interaction systems, the input device is the user’s own body; therefore, it makes sense that feedback should be related to the body of the user. In case of disabilities the mirror feedback mechanisms facilitated the interaction in vision-based systems for rehabilitation. Results recommends developers and researchers use this improvement in vision-based motor rehabilitation interactive systems.

scholarly journals People can Compensate for Directional Mismatches Between Input Devices and Cursor Motions, up to a Threshold

2019 ◽  
Vol 63 (1) ◽  
pp. 1164-1168
Author(s):  
Matthew R. Yanko ◽  
Dan Odell
Keyword(s):  
Virtual Reality ◽  
Visual Feedback ◽  
Physical Space ◽  
Vertical Motion ◽  
Input Device ◽  
Input Devices ◽  
Tactile Stimuli ◽  
Pointing Task ◽  
Human Capacity ◽  
The Right

This paper explores the human capacity to use visual feedback to compensate for directional mismatches between input devices and cursor motions in a standardized pointing task. Sixteen participants completed blocks of 64 trials as the directional mismatch between the input device and cursor motion was incremented clockwise by 7.5° over thirteen blocks, from 0° to 90°. At 90°, a vertical motion of the mouse mapped to a cursor motion directly to the right. Participants were robust to these acclimated directional mismatches up to 30°, at which point pointing performance began to decline. The findings have application in understanding the robustness of traditional input methods, as well as in virtual reality where visual feedback mismatches can be used for steering physical motions to make better use of constrained physical space or to reuse tactile stimuli.

scholarly journals Looking at the task in hand impairs motor learning

2012 ◽  
Vol 108 (11) ◽  
pp. 3043-3048 ◽  
Author(s):  
Richard M. Wilkie ◽  
Robyn L. Johnson ◽  
Peter R. Culmer ◽  
Richard Allen ◽  
Mark Mon-Williams
Keyword(s):  
Motor Learning ◽  
Visual Feedback ◽  
Surgical Techniques ◽  
Sensory Information ◽  
Input Device ◽  
Visual Capture ◽  
Laparoscopic Techniques

“Visual capture” is the term used to describe vision being afforded a higher weighting than other sensory information. Visual capture can produce powerful illusory effects with individuals misjudging the size and position of their hands. The advent of laparoscopic surgical techniques raises the question of whether visual capture can interfere with an individual's rate of motor learning. We compared adaptation to distorted visual feedback in two groups: the Direct group appeared to have the advantage of directly viewing the input device, while the Indirect group used the same input device but viewed their movements on a remote screen. Counterintuitively, the Indirect group adapted more readily to distorted feedback and showed enhanced performance. The results show that visual capture impairs adaptation to distorted visual feedback, suggesting that surgeons need to avoid viewing their hands when learning laparoscopic techniques.

Application of TEM to Deformation, Wear, and Fracture of Ceramics

1974 ◽  
Vol 32 ◽  
pp. 472-473
Author(s):  
B. J. Hockey
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Mechanical Behavior ◽  
Brittle Materials ◽  
High Temperature Strength ◽  
Wide Range ◽  
Corrosive Environments ◽  
Further Development

Ceramics, such as Al2O3 and SiC have numerous current and potential uses in applications where high temperature strength, hardness, and wear resistance are required often in corrosive environments. These materials are, however, highly anisotropic and brittle, so that their mechanical behavior is often unpredictable. The further development of these materials will require a better understanding of the basic mechanisms controlling deformation, wear, and fracture.The purpose of this talk is to describe applications of TEM to the study of the deformation, wear, and fracture of Al2O3. Similar studies are currently being conducted on SiC and the techniques involved should be applicable to a wide range of hard, brittle materials.

The stability of dislocation networks under various oxygen-doping conditions in superconducting Bi2Sr2CaCu2Oy single crystals and their influence on the flux pinning properties

1994 ◽  
Vol 52 ◽  
pp. 802-803
Author(s):  
Y. Feng ◽  
X. Y. Cai ◽  
R. J. Kelley ◽  
D. C. Larbalestier
Keyword(s):  
Single Crystals ◽  
Oxygen Content ◽  
Basal Plane ◽  
Flux Pinning ◽  
Pinning Centers ◽  
Before And After ◽  
Anomalous Peak ◽  
Basal Plane Dislocation ◽  
The Stability ◽  
Further Development

The issue of strong flux pinning is crucial to the further development of high critical current density Bi-Sr-Ca-Cu-O (BSCCO) superconductors in conductor-like applications, yet the pinning mechanisms are still much debated. Anomalous peaks in the M-H (magnetization vs. magnetic field) loops are commonly observed in Bi2Sr2CaCu2Oy (Bi-2212) single crystals. Oxygen vacancies may be effective flux pinning centers in BSCCO, as has been found in YBCO. However, it has also been proposed that basal-plane dislocation networks also act as effective pinning centers. Yang et al. proposed that the characteristic scale of the basal-plane dislocation networksmay strongly depend on oxygen content and the anomalous peak in the M-H loop at ˜20-30K may be due tothe flux pinning of decoupled two-dimensional pancake vortices by the dislocation networks. In light of this, we have performed an insitu observation on the dislocation networks precisely at the same region before and after annealing in air, vacuumand oxygen, in order to verify whether the dislocation networks change with varying oxygen content Inall cases, we have not found any noticeable changes in dislocation structure, regardless of the drastic changes in Tc and the anomalous magnetization. Therefore, it does not appear that the anomalous peak in the M-H loops is controlled by the basal-plane dislocation networks.

Arabidopsis 4-COUMAROYL-COA LIGASE 8 contributes to the biosynthesis of the benzenoid ring of coenzyme Q in peroxisomes

2019 ◽  
Vol 476 (22) ◽  
pp. 3521-3532
Author(s):  
Eric Soubeyrand ◽  
Megan Kelly ◽  
Shea A. Keene ◽  
Ann C. Bernert ◽  
Scott Latimer ◽  
...  
Keyword(s):  
Oxidative Metabolism ◽  
Time Course ◽  
Reverse Genetics ◽  
De Novo ◽  
Coenzyme Q ◽  
Control Level ◽  
Wild Type ◽  
Fluorescent Reporters ◽  
Coa Ligase ◽  
Peroxisomal Targeting

Plants have evolved the ability to derive the benzenoid moiety of the respiratory cofactor and antioxidant, ubiquinone (coenzyme Q), either from the β-oxidative metabolism of p-coumarate or from the peroxidative cleavage of kaempferol. Here, isotopic feeding assays, gene co-expression analysis and reverse genetics identified Arabidopsis 4-COUMARATE-COA LIGASE 8 (4-CL8; At5g38120) as a contributor to the β-oxidation of p-coumarate for ubiquinone biosynthesis. The enzyme is part of the same clade (V) of acyl-activating enzymes than At4g19010, a p-coumarate CoA ligase known to play a central role in the conversion of p-coumarate into 4-hydroxybenzoate. A 4-cl8 T-DNA knockout displayed a 20% decrease in ubiquinone content compared with wild-type plants, while 4-CL8 overexpression boosted ubiquinone content up to 150% of the control level. Similarly, the isotopic enrichment of ubiquinone's ring was decreased by 28% in the 4-cl8 knockout as compared with wild-type controls when Phe-[Ring-13C6] was fed to the plants. This metabolic blockage could be bypassed via the exogenous supply of 4-hydroxybenzoate, the product of p-coumarate β-oxidation. Arabidopsis 4-CL8 displays a canonical peroxisomal targeting sequence type 1, and confocal microscopy experiments using fused fluorescent reporters demonstrated that this enzyme is imported into peroxisomes. Time course feeding assays using Phe-[Ring-13C6] in a series of Arabidopsis single and double knockouts blocked in the β-oxidative metabolism of p-coumarate (4-cl8; at4g19010; at4g19010 × 4-cl8), flavonol biosynthesis (flavanone-3-hydroxylase), or both (at4g19010 × flavanone-3-hydroxylase) indicated that continuous high light treatments (500 µE m−2 s−1; 24 h) markedly stimulated the de novo biosynthesis of ubiquinone independently of kaempferol catabolism.

Clinical Success Using the Audio-Visual Feedback Training for Cluttering

2019 ◽  
Vol 4 (6) ◽  
pp. 1589-1594
Author(s):  
Yvonne van Zaalen ◽  
Isabella Reichel
Keyword(s):  
Visual Feedback ◽  
Clinical Success ◽  
Pause Duration ◽  
Digital Audio ◽  
Male Adolescents ◽  
Feedback Training ◽  
Positive Effects ◽  
Speech Monitoring ◽  
Adolescents And Adults

Purpose Among the best strategies to address inadequate speech monitoring skills and other parameters of communication in people with cluttering (PWC) is the relatively new but very promising auditory–visual feedback (AVF) training ( van Zaalen & Reichel, 2015 ). This study examines the effects of AVF training on articulatory accuracy, pause duration, frequency, and type of disfluencies of PWC, as well as on the emotional and cognitive aspects that may be present in clients with this communication disorder ( Reichel, 2010 ; van Zaalen & Reichel, 2015 ). Methods In this study, 12 male adolescents and adults—6 with phonological and 6 with syntactic cluttering—were provided with weekly AVF training for 12 weeks, with a 3-month follow-up. Data was gathered on baseline (T0), Week 6 (T1), Week 12 (T2), and after follow-up (T3). Spontaneous speech was recorded and analyzed by using digital audio-recording and speech analysis software known as Praat ( Boersma & Weenink, 2017 ). Results The results of this study indicated that PWC demonstrated significant improvements in articulatory rate measurements and in pause duration following the AVF training. In addition, the PWC in the study reported positive effects on their ability to retell a story and to speak in more complete sentences. PWC felt better about formulating their ideas and were more satisfied with their interactions with people around them. Conclusions The AVF training was found to be an effective approach for improving monitoring skills of PWC with both quantitative and qualitative benefits in the behavioral, cognitive, emotional, and social domains of communication.

Perceived Burden of Informal Caregivers of a Chronically Ill Older Family Member

GeroPsych ◽  
2011 ◽  
Vol 24 (3) ◽  
pp. 143-154 ◽  
Author(s):  
Elmar Gräßel ◽  
Raffaela Adabbo
Keyword(s):  
Family Member ◽  
Informal Caregiver ◽  
Chronically Ill ◽  
Stress Model ◽  
The Past ◽  
Perceived Burden ◽  
Hypothetical Construct ◽  
Care Situation ◽  
The Impact ◽  
Further Development

The burden of caregivers has been intensively researched for the past 30 years and has resulted in a multitude of individual findings. This review illustrates the significance of the hypothetical construct of perceived burden for the further development and design of the homecare situation. Following explanations regarding the term informal caregiver, we derive the construct burden from its conceptual association with the transactional stress model of Lazarus and Folkman. Once the extent and characteristics of burden have been set forth, we then present the impact of perceived burden as the care situation. The question of predictors of burden will lead into the last section from which implications can be derived for homecare and relief of caregivers.

Sign in / Sign up

Export Citation Format

Share Document