scholarly journals Techno-Economic Assessment of Co-Hydrothermal Carbonization of a Coal-Miscanthus Blend

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 630 ◽  
Author(s):  
Akbar Saba ◽  
Kyle McGaughy ◽  
M. Reza

Co-Hydrothermal Carbonization (Co-HTC) is a thermochemical process, where coal and biomass were treated simultaneously in subcritical water, resulting in bulk-homogenous hydrochar that is carbon-rich and a hydrophobic solid fuel with combustion characteristics like coal. In this study, technoeconomic analysis of Co-HTC was performed for a scaled-up Co-HTC plant that produces fuel for 110 MWe coal-fired power plant using Clarion coal #4a and miscanthus as starting feedstocks. With precise mass and energy balance of the Co-HTC process, sizing of individual equipment was conducted based on various systems equations. Cost of electricity was calculated from estimated capital, manufacturing, and operating and maintenance costs. The breakeven selling price of Co-HTC hydrochar was $117 per ton for a 110 MWe. Sensitivity analysis indicates that this breakeven selling price could be as low as $106 per ton for a higher capacity plant. Besides plant size, the price of solid fuel is sensitive to the feedstock costs and hydrochar yield.

2021 ◽  
Vol 13 (17) ◽  
pp. 9915
Author(s):  
Maria Dimopoulou ◽  
Vivian Offiah ◽  
Kolawole Falade ◽  
Alan M. Smith ◽  
Vassilis Kontogiorgos ◽  
...  

This research studied the commercial exploitation of an indigenous African crop in order to formulate high value products, with a potential significant impact on the local economy. More specifically, the present work investigated the extraction of polysaccharides from baobab in a bench-scale unit, focusing on the overall yield and the techno-economic assessment of the extraction process. Preliminary technoeconomic analysis for two scenarios (with and without ethanol recycling) was performed to determine the economic viability of the process and the development of the baobab market both in Nigeria and the UK. A full economic analysis was undertaken for each of the two scenarios, considering all operating and capital costs, and the production cost of baobab polysaccharides was estimated based on a constant return on investment. Combining the operating cost with the average polysaccharide yield, the minimum profitable selling price in the UK was estimated to be between £23 and £35 per 100 g of polysaccharide, which is comparable to the commercial selling price of high purity polysaccharides. An assessment of a scaled-up plant was also performed under Nigerian conditions and the results showed that such an investment is potentially viable and profitable, with a minimum profitable selling price of £27 per 100 g, a value comparable to the UK-based scenarios.


2021 ◽  
Author(s):  
Amir Al Ghatta ◽  
James D. E. T. Wilton-Ely ◽  
Jason P. Hallett

Process simulations allow the evaluation of the emissions and selling price for the production of the key monomer FDCA based on different feedstocks and solvent systems, alongside considerations of safety and current process development.


Processes ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 444 ◽  
Author(s):  
Samuel Carrasco ◽  
Javier Silva ◽  
Ernesto Pino-Cortés ◽  
Jaime Gómez ◽  
Fidel Vallejo ◽  
...  

The effect of magnesium chloride as an additive of hydrothermal carbonization (HTC) of lignocellulosic biomass (Pinus radiata sawdust) was studied. The HTC tests were carried out at fixed conditions of temperature and residence time of 220 °C and 1 h, respectively, and varying the dose of magnesium chloride in the range 0.0–1.0 g MgCl2/g biomass. The carbonized product (hydrochar) was tested in order to determine its calorific value (HHV) while using PARR 6100 calorimeter, mass yield by gravimetry, elemental analysis using a LECO TruSpec elemental analyzer, volatile matter content, and ash content were obtained by standardized procedures using suitable ovens for it. The results show that using a dose of 0.75 g MgCl2/g biomass results in an impact on the mass yield that was almost equal to change operating conditions from 220 to 270 °C and from 0.5 to 1 h, without additive. Likewise, the calorific value increases by 33% for this additive dose, resulting in an energy yield of 68%, thus generating a solid fuel of prominent characteristics.


Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2764
Author(s):  
Ameena Saad Al-Sumaiti ◽  
Abdollah Kavousi-Fard ◽  
Magdy Salama ◽  
Motahareh Pourbehzadi ◽  
Srikanth Reddy ◽  
...  

With the negative climate impact of fossil fuel power generation and the requirement of global policy to shift towards a green mix of energy production, the investment in renewable energy is an opportunity in developing countries. However, poor economy associated with limited income, funds availability, and regulations governing project funding and development are key factors that challenge investors in the energy sector. Given the various power generation resources, including renewables, it is necessary to evaluate the possible power generation investment options from an economic perspective. To realize this objective, solar PV, wind and diesel power generations are economically compared, considering the incremental rate of return and incremental benefit to cost ratio techniques. The alternative investment options of distributed generation technologies are evaluated for Maharashtra, India under different depreciation methods, and the effect of the latter on selecting the best investment candidate is investigated. The paper also conducts sensitivity analysis to examine the impact of capital cost, operation and maintenance cost, and fuel cost variations on the selection decision considering a comparison of the different general projects’ cash flow structures discussed in the literature. The economic aspects of selecting a project among possible alternatives for an investment in the power sector are analyzed, and the presented review provides comprehensive comparisons with respect to the literature approaches. The results reveal that, in the benchmark case study, the PV project is rejected and disregarded from further comparisons with other candidate projects since its equity internal rate of return (10.25%) is less than the minimum accepted rate of return, leaving the selection between wind and diesel energy projects. The study reveals that the incremental rates of return under such a comparison are 37.88%, 45.94% and 37.50% when MACRS, declining balance and straight line depreciations techniques are applied, respectively. Thus, the wind energy project is the favored option in this case. For the economic assessment of other case studies, the application of both sensitivity analysis on the capital cost and operation and maintenance cost and literature approaches to structure the projects reveal that wind energy for Maharashtra, India is a more attractive and feasible option compared to other distribution generation projects, while diesel is only considered to be a good option when its fuel cost is reduced by 5%. Finally, the paper highlights policy implications that can influence the decision to move towards investment in distributed generation technologies as a future research direction.


Sign in / Sign up

Export Citation Format

Share Document