scholarly journals A Zero-Dimensional Mixing Controlled Combustion Model for Real Time Performance Simulation of Marine Two-Stroke Diesel Engines

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 2000 ◽  
Author(s):  
Yongming Feng ◽  
Haiyan Wang ◽  
Ruifeng Gao ◽  
Yuanqing Zhu
Keyword(s):  
Diesel Engine ◽  
Prediction Model ◽  
Real Time ◽  
Combustion Product ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Combustion Model ◽  
Injection Timing ◽  
Low Speed ◽  
Injection Model

The paper presents a performance prediction model of marine low-speed two-stroke diesel engines based on an advanced MCC (mixture controlled combustion) model coupled with a fuel injection model. Considering the time of real calculation, the so-called “concentrated exhausting gas” scavenging model and the working process model are used in the present work, and improved by introducing the ratio of pure combustion product over the total gas mass in the cylinder as an expression of the working medium components. The reaction rate model in the zero-dimensional MCC model is improved by introducing the fraction of combustion product in the fuel spray, and the relationship between the combustion model and scavenging quality is established. Meanwhile, the combustion model was simplified in the diffusion combustion phases and integrated with the fuel injection model in order to respond to the change of injection profile and injection timing. A large-scale low-speed marine diesel engine was used for a simulation. The results of the whole model are consistent with experimental data and the speed of calculation is fast enough for real time simulation of low speed and medium speed diesel engines. The prediction model can be used in the design and calibration of the electronic control system and performance optimization of the marine two-stroke diesel engine.

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbocharging System for Diesel Engines

2010 ◽  
Vol 132 (5) ◽  
Author(s):  
Shiyou Yang ◽  
Kangyao Deng ◽  
Yi Cui ◽  
Hongzhong Gu
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
High Speed ◽  
Control Mechanism ◽  
Operating Conditions ◽  
Combustion Model ◽  
Injection Timing ◽  
Low Speed ◽  
Turbocharging System ◽  
High Torque

A new turbocharging system, named automatically variable intake exhaust injection timing (AVIEIT), is proposed. Its main purpose is to improve the performance of low-speed high torque operating conditions and improve the economy of high-speed operating conditions for high-speed supercharged intercooled diesel engines. The principle of the AVIEIT turbocharging system is presented. A control mechanism for the proposed AVIEIT system used for a truck diesel engine is introduced. An engine simulation code has been developed. In this code, a zero-dimensional in-cylinder combustion model, a one-dimensional finite volume method-total variation diminishing model for unsteady gas flow in the intake and exhaust manifolds, and a turbocharger model are used. The developed code is used to simulate the performances of diesel engines using the AVIEIT system. Simulations of a military use diesel engine “12V150” and a truck diesel engine “D6114” using the AVIEIT system have been performed. Simulation results show that the in-cylinder charge air amount of the diesel engine with the AVIEIT system is increased at low-speed high torque operating conditions, and the fuel economy is improved at high-speed operating conditions. In order to test the idea of the AVIEIT system, an experiment on a truck diesel engine D6114 equipped with an AVIEIT control mechanism has been finished. The experiment results show that the AVIEIT system can improve the economy of high-speed operating conditions. Both the simulation and experiment results suggest that the AVIEIT system has the potential to replace the waste-gate and variable geometry turbocharger turbocharging systems.

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

2009 ◽  
Author(s):  
Shiyou Yang ◽  
Kangyao Deng ◽  
Yi Cui ◽  
Hongzhong Gu
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
High Speed ◽  
Control Mechanism ◽  
Operating Conditions ◽  
Combustion Model ◽  
Injection Timing ◽  
Low Speed ◽  
Charging System ◽  
High Torque

A new turbo-charging system, named AVIEIT (automatically variable intake exhaust injection timing), is proposed. Its main purpose is to improve the performance of low speed high torque operating conditions and improve the economy of high speed operating conditions for high-speed supercharged inter-cooled diesel engines. The principle of the AVIEIT turbo-charging system is presented. A control mechanism for the proposed AVIEIT system used for a truck diesel engine is introduced. An engine simulation code has been developed. In this code, zero-dimensional in-cylinder combustion model, one-dimensional FVM-TVD (finite volume method-total variation diminishing) model for unsteady gas flow in the intake and exhaust manifold, and turbocharger model are used. The developed code is used to simulate the performances of diesel engines using the AVIEIT system. Simulations of a military use diesel engine “12V150” and a truck diesel engine “D6114” using the AVIEIT system have been performed. Simulation results show that the in-cylinder charge air amount of the diesel engine with the AVIEIT system is increased at low speed high torque operating conditions, and the fuel economy is improved at high speed operating conditions. In order to test the idea of the AVIEIT system, an experiment on a truck diesel engine “D6114” equipped with an AVIEIT control mechanism has been finished. The experiment results show that the AVIEIT system can improve economy of high speed operating conditions. Both the simulation and experiment results suggest that the AVIEIT system has the potential to replace the Waste-Gate and VGT turbo-charging systems.

scholarly journals Performance evaluation of common rail direct injection (CRDI) engine fuelled with Uppage Oil Methyl Ester (UOME)

2015 ◽  
Vol 4 (1) ◽  
pp. 1-10 ◽  
Author(s):  
D.N. Basavarajappa ◽  
N. R. Banapurmath ◽  
S.V. Khandal ◽  
G. Manavendra
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Diesel Engines ◽  
High Speed ◽  
Alternative Fuels ◽  
High Pressures ◽  
Fuel Injection ◽  
Injection Timing ◽  
Engine Operation ◽  
Performance And Emission

For economic and social development of any country energy is one of the most essential requirements. Continuously increasing price of crude petroleum fuels in the present days coupled with alarming emissions and stringent emission regulations has led to growing attention towards use of alternative fuels like vegetable oils, alcoholic and gaseous fuels for diesel engine applications. Use of such fuels can ease the burden on the economy by curtailing the fuel imports. Diesel engines are highly efficient and the main problems associated with them is their high smoke and NOx emissions.  Hence there is an urgent need to promote the use of alternative fuels in place of high speed diesel (HSD) as substitute. India has a large agriculture base that can be used as a feed stock to obtain newer fuel which is renewable and sustainable. Accordingly Uppage oil methyl ester (UOME) biodiesel was selected as an alternative fuel. Use of biodiesels in diesel engines fitted with mechanical fuel injection systems has limitation on the injector opening pressure (300 bar). CRDI system can overcome this drawback by injecting fuel at very high pressures (1500-2500 bar) and is most suitable for biodiesel fuels which are high viscous. This paper presents the performance and emission characteristics of a CRDI diesel engine fuelled with UOME biodiesel at different injection timings and injection pressures. From the experimental evidence it was revealed that UOME biodiesel yielded overall better performance with reduced emissions at retarded injection timing of -10° BTDC in CRDI mode of engine operation.

scholarly journals Impact of Pilot Injection on Combustion and Emission Characteristics of a Low-Speed Two-Stroke Marine Diesel Engine

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 417
Author(s):  
Xingyu Liang ◽  
Ziyang Liu ◽  
Kun Wang ◽  
Xiaohui Wang ◽  
Zhijie Zhu ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Marine Diesel Engine ◽  
Pilot Injection ◽  
Long Distance ◽  
Low Speed ◽  
Marine Diesel

Low-speed two-stroke marine diesel engines dominate the modern global long-distance transportation market; with the increasingly stringent regulations, the combustion and emissions of these engines is gaining intense interest. The primary objective of the present study was to understand the effects of air-fuel mixing by pilot injection strategy on the combustion and emission characteristics of the marine diesel engines through a numerical study. Specifically, a computational fluid dynamic (CFD) model was established and validated by experimental data for a typical low-speed two-stroke marine diesel engine. The combustion parameters under different stages were analyzed, including mean in-cylinder temperature and pressure, indicated thermal efficiency (ITE), indicated specific fuel consumption (ISFC), and distribution of fuel-air mixture. Results indicated that, due to the premixing effect, the pilot injection produced unburned soot from the main injection’s ignition as well as decrease the intervals between the middle and final stages of combustion, thus raising the in-cylinder temperature. The interaction between the reduction of soot particles resulted from the increased temperature, and the decrease of the stage intervals led to lower overall boundary heat loss, which improved the effective thermal efficiency. The pilot injection timing and quality, respectively, showed quadratic and linear impact modes on engine performance and emissions.

An Improved Rate of Heat Release Model for Modern High-Speed Diesel Engines

2017 ◽  
Vol 139 (9) ◽  
Author(s):  
Peter G. Dowell ◽  
Sam Akehurst ◽  
Richard D. Burke
Keyword(s):  
Heat Release ◽  
Diesel Engines ◽  
Engine Speed ◽  
Fuel Injection ◽  
Maximum Pressure ◽  
Injection Model ◽  
Wall Impingement ◽  
Small Set ◽  
Rate Of Heat Release ◽  
Engine System

To meet the increasingly stringent emissions standards, diesel engines need to include more active technologies with their associated control systems. Hardware-in-the-loop (HiL) approaches are becoming popular where the engine system is represented as a real-time capable model to allow development of the controller hardware and software without the need for the real engine system. This paper focusses on the engine model required in such approaches. A number of semi-physical, zero-dimensional combustion modeling techniques are enhanced and combined into a complete model, these include—ignition delay, premixed and diffusion combustion and wall impingement. In addition, a fuel injection model was used to provide fuel injection rate from solenoid energizing signals. The model was parameterized using a small set of experimental data from an engine dynamometer test facility and validated against a complete data set covering the full engine speed and torque range. The model was shown to characterize the rate of heat release (RoHR) well over the engine speed and load range. Critically, the wall impingement model improved R2 value for maximum RoHR from 0.89 to 0.96. This was reflected in the model's ability to match both pilot and main combustion phasing, and peak heat release rates derived from measured data. The model predicted indicated mean effective pressure and maximum pressure with R2 values of 0.99 across the engine map. The worst prediction was for the angle of maximum pressure which had an R2 of 0.74. The results demonstrate the predictive ability of the model, with only a small set of empirical data for training—this is a key advantage over conventional methods. The fuel injection model yielded good results for predicted injection quantity (R2 = 0.99) and enabled the use of the RoHR model without the need for measured rate of injection.

A phenomenological combustion analysis of a dual-fuel natural-gas diesel engine

2016 ◽  
Vol 231 (1) ◽  
pp. 66-83 ◽  
Author(s):  
Shuonan Xu ◽  
David Anderson ◽  
Mark Hoffman ◽  
Robert Prucka ◽  
Zoran Filipi
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Heat Release ◽  
Diesel Fuel ◽  
Fuel Injection ◽  
Dual Fuel ◽  
Injection Timing ◽  
Heavy Duty ◽  
Engine System ◽  
Wiebe Function

Energy security concerns and an abundant supply of natural gas in the USA provide the impetus for engine designers to consider alternative gaseous fuels in the existing engines. The dual-fuel natural-gas diesel engine concept is attractive because of the minimal design changes, the ability to preserve a high compression ratio of the baseline diesel, and the lack of range anxiety. However, the increased complexity of a dual-fuel engine poses challenges, including the knock limit at a high load, the combustion instability at a low load, and the transient response of an engine with directly injected diesel fuel and port fuel injection of compressed natural gas upstream of the intake manifold. Predictive simulations of the complete engine system are an invaluable tool for investigations of these conditions and development of dual-fuel control strategies. This paper presents the development of a phenomenological combustion model of a heavy-duty dual-fuel engine, aided by insights from experimental data. Heat release analysis is carried out first, using the cylinder pressure data acquired with both diesel-only and dual-fuel (diesel and natural gas) combustion over a wide operating range. A diesel injection timing correlation based on the injector solenoid valve pulse widths is developed, enabling the diesel fuel start of injection to be detected without extra sensors on the fuel injection cam. The experimental heat release trends are obtained with a hybrid triple-Wiebe function for both diesel-only operation and dual-fuel operation. The ignition delay period of dual-fuel operation is examined and estimated with a predictive correlation using the concept of a pseudo-diesel equivalence ratio. A four-stage combustion mechanism is discussed, and it is shown that a triple-Wiebe function has the ability to represent all stages of dual-fuel combustion. This creates a critical building block for modeling a heavy-duty dual-fuel turbocharged engine system.

scholarly journals MODIFYING MATHEMATICAL MODELS FOR CALCULATING OPERATIONAL CHARACTERISTICS OF DIESEL ENGINES BURNING RME BIOFUELS / MATEMATINIŲ MODELIŲ PRITAIKYMAS DYZELIŲ, DIRBANČIŲ RME BIODEGALAIS, DARBO PROCESUI IR EKSPLOATACINIAMS RODIKLIAMS SKAIČIUOTI / ДОРАБОТКА МАТЕМАТИЧЕСКИХ МОДЕЛЕЙ РАСЧЕТА ПОКАЗАТЕЛЕЙ РАБОТЫ ДИЗЕЛЯ НА БИОДИЗЕЛИНАХ РРМЭ

Transport ◽  
2011 ◽  
Vol 26 (1) ◽  
pp. 50-60 ◽  
Author(s):  
Sergejus Lebedevas ◽  
Galina Lebedeva ◽  
Kristina Bereišienė
Keyword(s):  
Diesel Engine ◽  
Mathematical Modelling ◽  
Mathematical Models ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Internal Heat ◽  
Computer Programs ◽  
Toxic Substances ◽  
Load Range ◽  
Operational Characteristics

The article considers and solves the problems of adapting the mathematical models, used in calculating operational characteristics of diesel engines burning mineral diesel oil, to engines converted to RME biofuels. The analysis of mathematical models of calculating the main technical and economic characteristics of diesel engines as well as the parameters of the in-cylinder process and the concentration of toxic substances in the exhaust gases is performed. The need for adjusting the calculation algorithms is also demonstrated. The computer programs based on single-zone thermodynamic models are used in the research. The programs of mathematical modelling are modified, i.e. supplemented with the algorithm for calculating energy characteristics of the combustion products (e.g. specific heat capacity, internal heat, the lower calorific value, etc.). Based on the computer programs, modified for examining diesel engines burning biofuels, the computer-aided mathematical modelling experiment is carried out. The results of modelling are compared with the data obtained in testing the diesel engine 1A41. The mathematical modelling performed demonstrates the accuracy acceptable for solving practical problems: the difference between the obtained calculation results and diesel engine testing data for the load range of (1.0÷0.5) Pi nom does not exceed ± 5÷7%. Higher accuracy of modelling the characteristics of diesel engines, operating in the low- and medium-load modes, may be accounted for by the adjustment of the algorithm for calculating the induction period and the on-set phase of fuel injection. Santrauka Publikacijoje pateikti dyzelio darbo proceso ir eksploatacinių rodiklių skaičiavimo matematinių modelių tobulinimo rezultatai, siekiant matematinius modelius pritaikyti dyzeliui dirbant riebiųjų rūgščių metilesterių, taip pat RME, biodegalais. Atlikta skaičiavimo algoritmų analizė ir pagrįsti pagrindiniai jų tobulinimo aspektai. Sukurtas kompiuterinis programinis modelis, skirtas darbinio kūno dyzelio cilindre energiniams parametrams skaičiuoti (specifinei šilumai, vidinei energijai), dyzeliui dirbant plačiąja elementinės cheminės sudėties biodegalų gama. Atliktas 1A41 dyzelio techninių ir ekonominių bei ekologinių rodiklių modeliavimas kompiuteriu, naudojant patobulintus matematinius modelius. Parodytas gautų rezultatų, pakankamų praktiniams uždaviniams spręsti, tikslumas: dyzeliui dirbant artimos nominaliosios apkrovos režimais (1,0÷0,5) Pi nom skirtumas tarp skaičiavimo ir dyzelio motorinių tyrimų rezultatų neviršija ±5÷7%. Dyzeliui dirbant mažos apkrovos režimu, matematinio modeliavimo rezultatų adekvatumo didinimas susijęs su kuro įpurškimo fazės bei savaiminio užsiliepsnojimo indukcijos periodo skaičiavimo algoritmo tobulinimu. Резюме Рассмотрены и решены задачи адаптации математических моделей расчета показателей дизеля при переводе их работы с минерального дизелина на биодизелины метилового эфира рапсового масла (МЭРМ). Выполнен анализ и дано обоснование направлений доработки расчетных алгоритмов ряда однозонных термодинамических математических моделей, используемых в практике исследования эксплуатационных показателей, параметров индикаторного процесса и эмиссии токсичных компонентов в выхлопных газах дизелей. В форме программного модуля составлен алгоритм расчета энергетических параметров рабочего тела в цилиндре (удельной теплоемкости, теплоты сгорания, внутренней энергии) для топлив с широким элементарным химическим составом. С использованием доработанных компьютерных программ выполнен широкий расчетный эксперимент и сопоставлены его результаты с данными моторных стендовых испытаний одноцилиндрового отсека дизеля 1А41. Показана приемлемая для решения практических задач точность математического моделирования: для нагрузочных режимов (1÷0,5) Pmi расхождения расчетных и экспериментальных значений параметров работы дизеля не превышают ±5÷7%. Повышение качества моделирования показателей дизеля на режимах средних и малых нагрузок связано с уточнением алгоритма расчета периода индукции и фазы начала видимого горения топлива в цилиндре.

Diesel engine performance mapping using a parametrized mixing time model

2017 ◽  
Vol 19 (2) ◽  
pp. 202-213 ◽  
Author(s):  
Michal Pasternak ◽  
Fabian Mauss ◽  
Christian Klauer ◽  
Andrea Matrisciano
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Mixing Time ◽  
Combustion Process ◽  
Engine Performance ◽  
Injection Timing ◽  
Engine Control ◽  
Reactor Model ◽  
Time Model ◽  
Tabulated Chemistry

A numerical platform is presented for diesel engine performance mapping. The platform employs a zero-dimensional stochastic reactor model for the simulation of engine in-cylinder processes. n-Heptane is used as diesel surrogate for the modeling of fuel oxidation and emission formation. The overall simulation process is carried out in an automated manner using a genetic algorithm. The probability density function formulation of the stochastic reactor model enables an insight into the locality of turbulence–chemistry interactions that characterize the combustion process in diesel engines. The interactions are accounted for by the modeling of representative mixing time. The mixing time is parametrized with known engine operating parameters such as load, speed and fuel injection strategy. The detailed chemistry consideration and mixing time parametrization enable the extrapolation of engine performance parameters beyond the operating points used for model training. The results show that the model responds correctly to the changes of engine control parameters such as fuel injection timing and exhaust gas recirculation rate. It is demonstrated that the method developed can be applied to the prediction of engine load–speed maps for exhaust NOx, indicated mean effective pressure and fuel consumption. The maps can be derived from the limited experimental data available for model calibration. Significant speedup of the simulations process can be achieved using tabulated chemistry. Overall, the method presented can be considered as a bridge between the experimental works and the development of mean value engine models for engine control applications.

Characteristics of injection of diesel fuel, rapeseed oil and their mixtures in diesel engines of various types

2021 ◽  
pp. 167-178
Author(s):  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Rapeseed Oil ◽  
High Speed ◽  
Fuel Injection ◽  
Experimental Studies ◽  
Fuel Injector ◽  
High Speed Diesel ◽  
Engine Type

The necessity of adapting diesel engines to work on vegetable oils is justified. The possibility of using rapeseed oil and its mixtures with petroleum diesel fuel as motor fuels is considered. Experimental studies of fuel injection of small high-speed diesel engine type MD-6 (1 Ch 8,0/7,5)when using diesel oil and rapeseed oil and computational studies of auto-tractor diesel engine type D-245.12 (1 ChN 11/12,5), working on blends of petroleum diesel fuel and rapeseed oil. When switching autotractor diesel engine from diesel fuel to rapeseed oil in the full-fuel mode, the mass cycle fuel supply increased by 12 %, and in the small-size high-speed diesel engine – by about 27 %. From the point of view of the flow of the working process of these diesel engines, changes in other parameters of the fuel injection process are less significant. Keywords diesel engine; petroleum diesel fuel; vegetable oil; rapeseed oil; high pressure fuel pump; fuel injector; sprayer

Sign in / Sign up

Export Citation Format

Share Document