scholarly journals Efficiency Analysis of Fractional KiloWatt Reluctance Motors with Various Frame Sizes, Taking into Account the Impact of the Punching Process

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 357 ◽  
Author(s):  
Zbigniew Gmyrek ◽  
Krzysztof Smółka
Keyword(s):  
Electricity Consumption ◽  
Operational Parameters ◽  
Stator Windings ◽  
Damaged Material ◽  
Material Part ◽  
Electrical Devices ◽  
Reduce Electricity Consumption ◽  
Negative Effect ◽  
Punching Process ◽  
The Impact

The need to reduce electricity consumption by electrical devices, including electric motors, is the reason for the development of new designs. Designers strive to improve operational parameters, including efficiency, using, for example, new types of magnetic materials, new types of stator windings, etc. Currently, in mass production, motor cores are made of punched laminations—punching causes damage of core parts. For motors of relatively large geometrical sizes, this effect is ignored during design. For motors having small dimensions, this negative effect results in a reduction in efficiency, which is mostly small for this type of motor. In this paper, the authors propose a new rapid algorithm based on simple measurements to determine the material characteristics of the damaged material part. Then, using them in the FEM models, they determine the efficiency of motors with various powers and frame sizes. On this basis, the conclusions are formulated, they may be helpful for motor designers.

Energy Efficiency and Electricity Reliability

2020 ◽  
pp. 1-78 ◽  
Author(s):  
Eliana Carranza ◽  
Robyn Meeks
Keyword(s):  
Energy Efficiency ◽  
Electricity Consumption ◽  
Kyrgyz Republic ◽  
Electrical Systems ◽  
Fluorescent Lamps ◽  
Compact Fluorescent Lamps ◽  
Reduce Electricity Consumption ◽  
Electricity Reliability ◽  
The Impact

Overloaded electrical systems are a major source of unreliable power. Using a randomized saturation design, we estimate the impact of compact fluorescent lamps (CFLs) on electricity reliability and household electricity consumption in the Kyrgyz Republic. Greater saturation of CFLs within a transformer leads to fewer outages, a technological externality benefitting all households, regardless of individual adoption. Spillovers in CFL adoption further reduce electricity consumption, contributing to increased reliability within a transformer. CFLs' impacts on household electricity consumption vary according to the effects on reliability. Receiving CFLs significantly reduces electricity consumption, but increased reliability permits greater consumption of electricity services.

scholarly journals Domesticating In Home Displays in Selected British and Norwegian Households

2017 ◽  
pp. 19-38 ◽  
Author(s):  
Tanja Winther ◽  
Sandra Bell
Keyword(s):  
New Technology ◽  
Electricity Consumption ◽  
Moral Economy ◽  
Social Practices ◽  
Material Object ◽  
Open Approach ◽  
Smart Meters ◽  
Reduce Electricity Consumption ◽  
Domestication Theory ◽  
The Impact

The paper uses qualitative data from Norway and the United Kingdom to understand the new technology of In Home Display monitors as a material object loaded with meaning and norms that may affect social practices and relations. The displays are designed to encourage householders to reduce electricity consumption. In contrast to technologies associated with ‘smart meters’, the monitors under study cannot be used for controlling or automatising various types of electricity consumption, but these devises nonetheless often form part of ‘smart grid solutions’. A large part of the research in this area has attempted to quantify the impact of displays, and qualitative research focusing on the users has also mainly sought to explain why - or why not – the introduction of displays has resulted in reduced household consumption. This paper follows a more open approach to the introduction and impact of displays by paying attention to the existing routines and social practices into which the display enters and potentially becomes integrated and domesticated. We examine to what extent ideas and norms inscribed in the display continue to have a bearing on the household moral economy and internal dynamics as the objects are negotiated and taken in use in British and Norwegian homes. Drawing on earlier studies that have sought to combine practice and domestication theory for understanding displays, the study’s novelty lies in its focus on the materiality of displays and social implications thereof, and its analysis of the social status of this object in two different contexts.

scholarly journals Comparison of the fractional power motor with cores made of various magnetic materials

Open Physics ◽  
2017 ◽  
Vol 15 (1) ◽  
pp. 827-832 ◽  
Author(s):  
Zbigniew Gmyrek ◽  
Marcin Lefik ◽  
Andrea Cavagnino ◽  
Luca Ferraris
Keyword(s):  
Core Loss ◽  
Fractional Power ◽  
Magnetic Composite ◽  
New Materials ◽  
Operational Parameters ◽  
Technological Parameters ◽  
Magnetization Direction ◽  
The Core ◽  
Punching Process ◽  
The Impact

AbstractThe optimization of the motor cores, coupled with new core shapes as well as powering the motor at high frequency are the primary reasons for the use of new materials. The utilization of new materials, like SMC (soft magnetic composite), reduce the core loss and/or provide quasi-isotropic core’s properties in any magnetization direction. Moreover, the use of SMC materials allows for avoiding degradation of the material portions, resulting from punching process, thereby preventing the deterioration of operating parameters of the motor. The authors examine the impact of technological parameters on the properties of a new type of SMC material and analyze the possibility of its use as the core of the fractional power motor. The result of the work is an indication of the shape of the rotor core made of a new SMC material to achieve operational parameters similar to those that have a motor with a core made of laminations.

The Transnational Women's Rights Movement and the World Economy

2020 ◽  
Vol 6 (2) ◽  
pp. 145-173 ◽  
Author(s):  
Heidi E. Rademacher
Keyword(s):  
Women's Rights ◽  
Small Body ◽  
World System ◽  
World Society ◽  
Women’S Rights ◽  
Social Movement Organizations ◽  
Global Movement ◽  
Negative Effect ◽  
Society Perspective ◽  
The Impact

Promoting the ratification of the Convention on the Elimination of All Forms of Discrimination against Women (CEDAW) was a key objective of the transnational women's movement of the 1980s and 1990s. Yet, few studies examine what factors contribute to ratification. The small body of literature on this topic comes from a world-society perspective, which suggests that CEDAW represented a global shift toward women's rights and that ratification increased as international NGOs proliferated. However, this framing fails to consider whether diffusion varies in a stratified world-system. I combine world-society and world-systems approaches, adding to the literature by examining the impact of women's and human rights transnational social movement organizations on CEDAW ratification at varied world-system positions. The findings illustrate the complex strengths and limitations of a global movement, with such organizations having a negative effect on ratification among core nations, a positive effect in the semiperiphery, and no effect among periphery nations. This suggests that the impact of mobilization was neither a universal application of global scripts nor simply representative of the broad domination of core nations, but a complex and diverse result of civil society actors embedded in a politically stratified world.

The Impact of Competitive Quasi-Market on Service Delivery in Benue State University, Makurdi Nigeria

GIS Business ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. 85-98
Author(s):  
Idoko Peter
Keyword(s):  
Service Delivery ◽  
A Priori ◽  
Least Square ◽  
Secondary Source ◽  
State University ◽  
Ordinary Least Square ◽  
Negative Effect ◽  
The Impact ◽  
The Relationship

This research the impact of competitive quasi market on service delivery in Benue State University, Makurdi Nigeria. Both primary and secondary source of data and information were used for the study and questionnaire was used to extract information from the purposively selected respondents. The population for this study is one hundred and seventy three (173) administrative staff of Benue State University selected at random. The statistical tools employed was the classical ordinary least square (OLS) and the probability value of the estimates was used to tests hypotheses of the study. The result of the study indicates that a positive relationship exist between Competitive quasi marketing in Benue State University, Makurdi Nigeria (CQM) and Transparency in the service delivery (TRSP) and the relationship is statistically significant (p<0.05). Competitive quasi marketing (CQM) has a negative effect on Observe Competence in Benue State University, Makurdi Nigeria (OBCP) and the relationship is not statistically significant (p>0.05). Competitive quasi marketing (CQM) has a positive effect on Innovation in Benue State University, Makurdi Nigeria (INVO) and the relationship is statistically significant (p<0.05) and in line with a priori expectation. This means that a unit increases in Competitive quasi marketing (CQM) will result to a corresponding increase in innovation in Benue State University, Makurdi Nigeria (INVO) by a margin of 22.5%. It was concluded that government monopoly in the provision of certain types of services has greatly affected the quality of service experience in the institution. It was recommended among others that the stakeholders in the market has to be transparent so that the system will be productive to serve the society effectively

Problems of Implementation of an Import Substitution Policy in the Oil Industry

2019 ◽  
pp. 50-57
Author(s):  
Yu. V. Vertakova ◽  
A. S. Evtyukhin
Keyword(s):  
Import Substitution ◽  
Oil Industry ◽  
Investment Climate ◽  
Scientific Publications ◽  
Stage Of Development ◽  
Current Economic Situation ◽  
Negative Effect ◽  
Substitution Policy ◽  
Investment Process ◽  
The Impact

The presented study addresses the issues of implementation of an import substitution policy in the Russian oil industry. Support of domestic production is a key objective specified in the message of the President of the Russian Federation in 2019. In light of the current economic situation and considering the importance of the oil industry for the Russian economy, an import substitution policy could help achieve the objective set by the President.Aim. The study aims to identify the problems and ways of implementation of an import substitution policy in the Russian oil industry.Tasks. The authors analyze scientific publications on import substitution and the state of the Russian oil industry at the current stage of development; determine the directions and fundamental trends in the development of the oil industry; identify obstacles that hinder the implementation of an import substitution policy in the oil industry; describe conditions that facilitate the development of the  investment process in the oil industry; propose comprehensive methods and ways to intensify investments and optimize costs for enterprises in the oil industry.Methods. This study uses general scientific methods of cognition, comparative and statistical analysis to identify problems in the implementation of an import substitution policy in the oil industry.Results. Examination of the current state and development prospects of the oil industry allows the authors to identify obstacles to the development of import substitution. The study shows their impact on the potential of import substitution, which has a negative effect on the prospects of intensification of investment processes, and proposes comprehensive methods and mechanisms that could neutralize the impact of the identified obstacles, thus facilitating the formation of a positive investment climate. Conclusions. Investment climate is shown to have a decisive impact on the potential of import substitution in the Russian oil industry, and ways of overcoming negative trends in the development of the oil industry are proposed.

Application of vacuum belt press filters for cane mud filtration and performance comparison with rotary filters

2014 ◽  
pp. 298-301 ◽  
Author(s):  
Arnaud Petit
Keyword(s):  
Electricity Consumption ◽  
Performance Comparison ◽  
Operating Conditions ◽  
Vacuum Filter ◽  
Sugar Mill ◽  
Belt Press ◽  
Vacuum Belt ◽  
And Performance ◽  
Mud Filtration ◽  
The Impact

Bois-Rouge factory, an 8000 t/d cane Reunionese sugarcane mill, has fully equipped its filtration station with vacuum belt press filters since 2010, the first one being installed in 2009. The present study deals with this 3-year experience and discusses operating conditions, electricity consumption, performance and optimisation. The comparison with the more classical rotary drum vacuum filter station of Le Gol sugar mill highlights advantages of vacuum belt press filters: high filtration efficiency, low filter cake mass and sucrose content, low total solids content in filtrate and low power consumption. However, this technology needs a mud conditioning step and requires a large amount of water to improve mud quality, mixing of flocculant and washing of filter belts. The impact on the energy balance of the sugar mill is significant. At Bois-Rouge mill, studies are underway to reduce the water consumption by recycling low d.s. filtrate and by dry cleaning the filter belts.

Others' participation rate influences an individual's charitable behavior: Others' similarity as a moderator

2017 ◽  
Vol 45 (10) ◽  
pp. 1607-1618 ◽  
Author(s):  
Seung Yun Lee ◽  
Sunho Jung ◽  
Sangdo Oh ◽  
Seong Hoon Park
Keyword(s):  
Undergraduate Students ◽  
Participation Rate ◽  
High Rate ◽  
Charitable Behavior ◽  
High Participation ◽  
Negative Effect ◽  
The Impact ◽  
And Diffusion ◽  
High Participation Rate ◽  
Diffusion Of Responsibility

We proposed that a moderator, others' similarity, would determine the impact of high participation rates of others on an individual's charitable behavior, and aimed to show that this moderator would work through the diffusion of responsibility motive. Participants (N = 152 undergraduate students) completed measures of charitable behavior and diffusion of responsibility, after being assigned to 1 of 2 conditions where a set percentage of other students (manipulated as either similar undergraduate students or dissimilar graduate students) were stated to have already donated to a charitable campaign (high contribution condition = 70% participation, low contribution condition = 30% participation). Our results showed that the high participation rate of others increased an individual's charitable behavior when the others in question were similar to that individual, but not when the others were dissimilar. In addition, the high rate of participation by others increased the diffusion of responsibility motive when the others in question were dissimilar to that individual, leading to a negative effect on that individual's charitable behavior.

scholarly journals Effect of Competition and Climatic Conditions on the Growth of Beech in the Mixed Pine Beech Stand: Lithuanian Case Study

2020 ◽  
Vol 3 (1) ◽  
pp. 49
Author(s):  
Edgaras Linkevičius ◽  
Gerda Junevičiūtė
Keyword(s):  
Intraspecific Competition ◽  
Tree Species ◽  
Forest Growth ◽  
Competition Effect ◽  
Diameter Increment ◽  
Cart Analysis ◽  
Crown Width ◽  
Beech Stand ◽  
Negative Effect ◽  
The Impact

Climate change and warming will potentially have profound effects on forest growth and yield, especially for pure stands in the near future. Thus, increased attention has been paid to mixed stands, e.g., pine and beech mixtures. However, the interaction of tree species growing in mixtures still remains unknown. Thus, the aim of this study was to investigate the impact of the interspecific and intraspecific competition to diameter, height, and crown width of pine and beech trees growing in mixtures, as well as to evaluate the impact of climatic indicators to the beech radial diameter increment. The data was collected in 2017 at the mixed mature pine beech double layer stand, located in the western part of Lithuania. The sample plot of 1.2 hectare was established and tree species, diameter at the breast height, tree height, height-to-crown base, height-to-crown width, and position were measured for all 836 trees. Additionally, a representative sample of radial diameter increments were estimated only for the beech trees by taking out core discs at the height of 1 m when the stand was partially cut. Competition analysis was based on the distance-dependent competition index, which was further based on crown parameters. Climatic effect was evaluated using classification and regression tree (CART) analysis. We found almost no interspecific competition effect to diameter, height, or crown width for both tree species growing in the first layer. However, it had an effect on beeches growing in the second layer. The intraspecific competition effect was important for pine and beech trees, showing a negative effect for both of them. Our results show the possible coexistence of these tree species due to niche differentiation. An analysis of climatic indicators from 1991–2005 revealed that precipitation from February–May of the current vegetation year and mean temperatures from July to September expressed radial diameter increment effects for beech trees. Low temperatures during March and April, as well as high precipitation during January, had a negative effect on beech radial increments. From 2006–2016, the highest effect on radial diameter increments was the mean temperatures from July to September, as well as the precipitation in January of the current year. From 1991–2016, the highest effect on radial diameter increments was the temperature from July to September 1991–2016 and the precipitation in June 1991–2016. Generally, cool temperatures and higher precipitation in June had a positive effect on beech radial increments. Therefore, our results show a sensitivity to high temperatures and droughts during summer amid Lithuanian’s growth conditions.

scholarly journals The Impact of Urban Recreation Environment on Residents’ Happiness—Based on a Case Study in China

2021 ◽  
Vol 13 (10) ◽  
pp. 5549
Author(s):  
Lei Kang ◽  
Zhaoping Yang ◽  
Fang Han
Keyword(s):  
Low Income ◽  
Subjective Evaluation ◽  
Objective Evaluation ◽  
Income Group ◽  
High Income Group ◽  
Rapid Urbanization ◽  
Indirect Impact ◽  
Negative Effect ◽  
The Impact ◽  
Urban Recreation

Rapid urbanization promotes the expansion of urban tourism and recreation functions, but it also brings many problems, which affect residents’ happiness. Previous studies have emphasized the direct impact of urban recreation environment on happiness, and few have explored the indirect impact of urban recreation environment on happiness through subjective evaluation. Based on the survey data of nearly 10,000 permanent residents in 40 key tourism cities in China, this paper establishes a theoretical framework of the direct and indirect impact of urban recreation environment on happiness. The objective evaluation of natural recreation environment and sociocultural recreation environment has an important influence on happiness, but the influence of natural recreation environment is greater than that of sociocultural recreation environment. Individual subjective satisfaction with urban recreation environment mediates the relationship between urban objective environment and happiness. Urban parks have a positive effect on happiness, while tourist attractions have a negative effect. The influence of urban location on happiness is nonlinear. The high-income group is more sensitive to the recreation environment, while the low-income group is less sensitive to the recreation environment. These findings provide insights for further improving citizens’ quality of life and designing urban construction in developing countries under the conditions of rapid urbanization.

Sign in / Sign up

Export Citation Format

Share Document