scholarly journals An Integrated Approach to Convert Lignocellulosic and Wool Residues into Balanced Fertilisers

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 497
Author(s):  
Filippo Marchelli ◽  
Giorgio Rovero ◽  
Massimo Curti ◽  
Elisabetta Arato ◽  
Barbara Bosio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Renewable Energy ◽  
Circular Economy ◽  
Integrated Approach ◽  
Lignocellulosic Residues ◽  
Biomass Waste ◽  
Slow Pyrolysis ◽  
C And N ◽  
Water Hydrolysis ◽  
Conversion Technologies

Valorising biomass waste and producing renewable energy or materials is the aim of several conversion technologies. In this work, we consider two residues from different production chains: lignocellulosic residues from agriculture and wool residues from sheep husbandry. These materials are produced in large quantities, and their disposal is often costly and challenging for farmers. For their valorisation, we focus on slow pyrolysis for the former and water hydrolysis for the latter, concisely presenting the main literature related to these two processes. Pyrolysis produces the C-rich biochar, suitable for soil amending. Hydrolysis produces a N-rich fertiliser. We demonstrate how these two processes could be fruitfully integrated, as their products can be flexibly mixed to produce fertilisers. This solution would allow the achievement of balanced and tuneable ratios between C and N and the enhancement of the mechanical properties. We propose scenarios for this combined valorisation and for its coupling with other industries. As a result, biomass waste would be returned to the field, following the principles of circular economy.

Renewable energy generation from livestock waste for a sustainable circular economy in Bangladesh

2021 ◽  
Vol 139 ◽  
pp. 110695
Author(s):  
KM Nazmul Islam ◽  
Tapan Sarker ◽  
Farhad Taghizadeh-Hesary ◽  
Anashuwa Chowdhury Atri ◽  
Mohammad Shafiul Alam
Keyword(s):  
Renewable Energy ◽  
Circular Economy ◽  
Energy Generation ◽  
Livestock Waste ◽  
Renewable Energy Generation

scholarly journals Implications for Sustainability of the Joint Application of Bioeconomy and Circular Economy: A Worldwide Trend Study

2021 ◽  
Vol 13 (13) ◽  
pp. 7182
Author(s):  
Emilio Abad-Segura ◽  
Ana Batlles-delaFuente ◽  
Mariana-Daniela González-Zamar ◽  
Luis Jesús Belmonte-Ureña
Keyword(s):  
Environmental Sustainability ◽  
Circular Economy ◽  
Sustainable Use ◽  
Integrated Approach ◽  
Green Economy ◽  
Economic Knowledge ◽  
Joint Application ◽  
Bibliometric Review ◽  
State Of Research ◽  
The Impact

The joint application of bioeconomy (BE) and circular economy (CE) promotes the sustainable use of natural resources, since by applying a systemic approach, it improves the efficiency of these resources and reduces the impact on the environment. Both strategies, which belong to the area of green economy, provide a global and integrated approach towards environmental sustainability, as regards the extraction of biological materials, the protection of biodiversity and even the primary function of food production in agriculture. The objective was to analyze the implications for sustainability of BE and CE joint application. A systematic and bibliometric review has been applied to a sample of 1961 articles, selected from the period 2004–May 2021. A quantitative and qualitative advance is observed in this field of study. The expansion of scientific production is due to its multidisciplinary nature, since it implies technical, environmental and economic knowledge. The main contribution of this study is to understand the state of research on the implications for sustainability that BE and CE have when combined, in relation to their evolution, the scientific collaboration between the main driving agents, and the identification of the main lines of research developed.

scholarly journals Synthesis of porous carbon material based on biomass derived from hibiscus sabdariffa fruits as active electrodes for high-performance symmetric supercapacitors

RSC Advances ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 354-363
Author(s):  
Hamouda Adam Hamouda ◽  
Shuzhen Cui ◽  
Xiuwen Dai ◽  
Lele Xiao ◽  
Xuan Xie ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Porous Carbon ◽  
Carbon Material ◽  
High Performance ◽  
Porous Carbon Material ◽  
Hibiscus Sabdariffa ◽  
Biomass Waste ◽  
Renewable Energy Storage ◽  
Carbon Based

Carbon-based materials are manufactured as high-performance electrodes using biomass waste in the renewable energy storage field.

The Effects of Heat Treatment on the Chemical Alterations of Oak Wood

2016 ◽  
Vol 688 ◽  
pp. 44-49 ◽  
Author(s):  
Iveta Čabalová ◽  
František Kačík ◽  
Tereza Tribulová
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
High Performance Liquid Chromatography ◽  
Renewable Energy ◽  
Liquid Chromatography ◽  
Thermal Treatment ◽  
High Performance ◽  
Treated Wood ◽  
National Renewable Energy Laboratory ◽  
Oak Wood

Samples prepared from oak (Quercusrobur L.) wood were exposed to heat treatment at temperatures of 160, 180, 200 and 220 oC for 3, 6, 9 and 12 hours. In both untreated and thermally treated wood there were determined extractives and lignin by National Renewable Energy Laboratory (NREL) procedures, cellulose by Seifert's method, holocellulose according to Wise, hemicelluloses as difference between holocellulose and cellulose. Monosaccharides were determined by high performance liquid chromatography (NREL).The results show that hemicelluloses are less stable at thermal treatment than cellulose. The amounts of lignin and extractives rose by increasing both temperature and time of the treatment while the amounts of hemicelluloses decreased. Thermal treatment also resulted in significant decreases of the yields of non-glucosic saccharides. Degradation of carbohydrates can cause the deterioration of mechanical properties of wood.

scholarly journals Progress in Biodegradable Flame Retardant Nano-Biocomposites

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 741
Author(s):  
Zorana Kovačević ◽  
Sandra Flinčec Grgac ◽  
Sandra Bischof
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Circular Economy ◽  
Nanocomposite Materials ◽  
Thermal And Mechanical Properties ◽  
Specific Group ◽  
New Class ◽  
Research Initiatives ◽  
Positive Properties

This paper summarizes the results obtained in the course of the development of a specific group of biocomposites with high functionality of flame retardancy, which are environmentally acceptable at the same time. Conventional biocomposites have to be altered through different modifications, to be able to respond to the stringent standards and environmental requests of the circular economy. The most commonly produced types of biocomposites are those composed of a biodegradable PLA matrix and plant bast fibres. Despite of numerous positive properties of natural fibres, flammability of plant fibres is one of the most pronounced drawbacks for their wider usage in biocomposites production. Most recent novelties regarding the flame retardancy of nanocomposites are presented, with the accent on the agents of nanosize (nanofillers), which have been chosen as they have low or non-toxic environmental impact, but still offer enhanced flame retardant (FR) properties. The importance of a nanofiller’s geometry and shape (e.g., nanodispersion of nanoclay) and increase in polymer viscosity, on flame retardancy has been stressed. Although metal oxydes are considered the most commonly used nanofillers there are numerous other possibilities presented within the paper. Combinations of clay based nanofillers with other nanosized or microsized FR agents can significantly improve the thermal stability and FR properties of nanocomposite materials. Further research is still needed on optimizing the parameters of FR compounds to meet numerous requirements, from the improvement of thermal and mechanical properties to the biodegradability of the composite products. Presented research initiatives provide genuine new opportunities for manufacturers, consumers and society as a whole to create a new class of bionanocomposite materials with added benefits of environmental improvement.

scholarly journals Physical-Mechanical Properties of Cupola Slag Cement Paste

2021 ◽  
Vol 11 (15) ◽  
pp. 7029
Author(s):  
Carlos Thomas ◽  
José Sainz-Aja ◽  
Israel Sosa ◽  
Jesús Setién ◽  
Juan A. Polanco ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Circular Economy ◽  
Setting Time ◽  
Casting Process ◽  
Industrial Sector ◽  
Sulphate Attack ◽  
Experimental Campaign ◽  
High Consumption ◽  
Superior Mechanical Properties ◽  
Environmental Savings

The high consumption of natural resources in the industrial sector makes it necessary to implement measures that enable the reuse of the waste generated, seeking to achieve circular economy. This work assesses the viability of an alternative to the use of CEM III B 32.5 R cement in mortars for the internal coating of centrifugally spun cast iron pipes for water piping. The proposal is to reuse the slag generated in the casting process after being finely ground, as an addition mixed with CEM I 52.5 R cement, which is basically Portland clinker. In order to analyse this possibility, an extensive experimental campaign was carried out, including the analysis of the cupola slag (micro-structural and chemical composition, leachates, setting time, vitrification, puzzolanicity and resistance to sulphate) and regarding the mortars (workability and mechanical properties). The experimental programme has shown that the optimum substitution is achieved with a replacement percentage of 20% of the cement, with which similar workability, superior mechanical properties and guaranteed resistance to sulphate attack are obtained. In addition, both economic and environmental savings are achieved by not having to transport or landfill the waste. In addition, the new cement is cheaper than the cement currently used.

Exploring the diversity of elastic responses of crystalline cadmium(ii) coordination polymers: from elastic towards plastic and brittle responses

CrystEngComm ◽  
2021 ◽  
Author(s):  
Mateja Pisačić ◽  
Ivan Kodrin ◽  
Ivana Biljan ◽  
Marijana Đaković
Keyword(s):  
Mechanical Properties ◽  
Coordination Polymers ◽  
Integrated Approach ◽  
Elastic Responses ◽  
Theory And Experiment

Noticeable differences in mechanically induced elastic responses were observed for isostructural crystalline coordination polymers, and their mechanical properties were examined through a highly integrated approach, using both theory and experiment.

Multi-Objective Build Orientation Optimization for Powder Bed Fusion by Laser

2017 ◽  
Vol 139 (11) ◽  
Author(s):  
Salah Eddine Brika ◽  
Yaoyao Fiona Zhao ◽  
Mathieu Brochu ◽  
Justin Mezzetta
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Integrated Approach ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Build Orientation ◽  
Multi Objective ◽  
Build Time ◽  
Process Factors ◽  
Experimental Data Analysis

This paper proposes an integrated approach to determine optimal build orientation for powder bed fusion by laser (PBF-L), by simultaneously optimizing mechanical properties, surface roughness, the amount of support structure (SUPP), and build time and cost. Experimental data analysis has been used to establish the objective functions for different mechanical properties and surface roughness. Geometry analysis of the part has been used to estimate the needed SUPP and thus evaluate the build time and cost. Normalized weights are assigned to different objectives depending on their relative importance allowing solving the multi-objective optimization problem using a genetic optimization algorithm. A study case is presented to demonstrate the capabilities of the developed system. The major achievements of this work are the consideration of multiple objectives and the establishment of objective function considering different load direction and heat treatments. A user-friendly graphical user interface was developed allowing to control different optimization process factors and providing different visualization and evaluation tools.

Performance Analysis of a Biomass Gasifier Genset at Varying Operating Conditions

2018 ◽  
Vol 34 (1) ◽  
pp. 135-143 ◽  
Author(s):  
Kyle D Palmer ◽  
Mark A Severy ◽  
Charles E Chamberlin ◽  
Anthony J. Eggink ◽  
Arne E Jacobson
Keyword(s):  
Renewable Energy ◽  
Biomass Conversion ◽  
Catalytic Converter ◽  
Operating Conditions ◽  
Diesel Generator ◽  
Forest Operations ◽  
Coast Redwood ◽  
Moisture Contents ◽  
Two Parameters ◽  
Conversion Technologies

Abstract. An All Power Labs PP20 gasifier generation set (Berkeley, Calif.) was tested to evaluate its suitability for powering biomass conversion technologies (BCT) at remote forest operations sites. Feedstock of the species tanoak (), coast redwood (), and Douglas fir () were tested at moisture contents of 15% and 25% (wet basis). The PP20 was connected to a load bank with five different load profiles designed to simulate possible BCT loads. Two parameters of power quality, voltage variability, and frequency deviation, were determined to be within acceptable limits. The unit also successfully powered a remote biochar operation in Branscomb, California. Emissions of the PP20, when compared to diesel generator regulations, would meet non-methane hydrocarbons (NMHC) and NOX requirements but exceed the CO emissions limits by a factor of ten. The CO emissions could be reduced by adding a catalytic converter. The results indicate that it is possible to use a PP20 unit to provide electric power for the highly variable loads of a BCT system. Keywords: Bioenergy, Biomass conversion technology, Gasification, Renewable energy.

Sign in / Sign up

Export Citation Format

Share Document