scholarly journals Experimental Study of Fuel Consumption and Exhaust Gas Composition of a Diesel Engine Powered by Biodiesel from Waste of Animal Origin

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3472
Author(s):  
Dariusz Kurczyński ◽  
Grzegorz Wcisło ◽  
Piotr Łagowski
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Animal Origin ◽  
Exhaust Gas ◽  
Gas Composition ◽  
Animal Fat ◽  
Carbon Dioxide Concentrations ◽  
Petroleum Resources ◽  
Smoke Opacity

The use of biofuel is one method for limiting the harmful impact of diesel engines on the environment. It is also a way of gradually becoming less dependent on the depleting petroleum resources. New resources for producing biodiesel are currently being sought. The authors produced esters from animal fat waste, obtaining a fuel that can power diesel engines and identifying a way to utilise unnecessary waste. The animal fat methyl ester (AME) was produced using a reactor constructed for non-industrial ester production. The aim underlying this paper was to determine whether a diesel engine can be fuelled with AME biodiesel and to test this fuel’s impact on exhaust gas composition and fuel consumption. Fuelling a Perkins 1104D-44TA engine with AME biodiesel led to a reduction in the smoke opacity of the exhaust gas as well as in carbohydrate, particulate matter, and carbon monoxide concentrations. The carbon dioxide concentrations were similar for biodiesel and diesel fuel. Slight increases in nitrogen oxides concentrations and brake-specific fuel consumption were found for AMEs. An engine can be fuelled with AME biodiesel, but it is necessary to improve its low-temperature properties.

scholarly journals Model development and experimental validation of an exhaust brake supported dual loop exhaust gas recirculation on a medium duty Diesel engine

Mechanika ◽  
2020 ◽  
Vol 26 (6) ◽  
pp. 486-496
Author(s):  
Ádám NYERGES ◽  
Máté ZÖLDY
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Internal Combustion Engines ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
State Variables ◽  
Commercial Vehicles ◽  
Combustion Processes ◽  
Gas Recirculation

Due to the new European emission norms internal combustion engines have to comply stricter rules. The new norms contain new requirements that were not included in previous regulations for example the decreased temperature of the cold start or the real driving emission part. The emission cycles for passenger vehicles are completely news, the stricter emission norms for commercial vehicles will follow them within a few years. Despite the increasing spread of alternative transmission systems in road transport Diesel engines are going to be remain in commercial vehicles in the next decades due to their good torque and fuel consumption performance. The emission of Diesel engines can be kept low by several way: by the modification of combustion processes, or by exhaust gas after treatment. To comply future regulations both of them seems to be necessary. By exhaust gas recirculation systems alternative Diesel combustion processes can be realized which can provide lower nitrogen-oxide emission and in several operation points also lower fuel consumption. Exhaust gas recirculation systems also can support the thermal management of a Diesel engine. To utilize the advantages of the recirculated exhaust gases a complex system is necessary to get a freedom in control possibilities: duel loop exhaust gas recirculated systems supplemented with supporter valves on the intake or on the exhaust side. In this paper a pressure and mass flow rate based control oriented engine model will be presented which contains high and low pressure exhaust gas recirculation systems and both of them are supported by exhaust brakes. The model considers four balance volumes and it has five state variables. The model is validated by an engine dyno measurements on a medium duty Diesel engine.

scholarly journals Ensuring Requirements for Emissions of Harmful Substances of Diesel Engines

2020 ◽  
Vol 19 (4) ◽  
pp. 305-310
Author(s):  
G. M. Kuharonak ◽  
D. V. Kapskiy ◽  
V. I. Berezun
Keyword(s):  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Fuel Consumption ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
Average Temperature ◽  
Dispersed Particles ◽  
Harmful Substances ◽  
Gas Recirculation ◽  
Emissions Of Harmful Substances

The purpose of this work is to consider the requirements for emissions of harmful substances of diesel engines by selecting design and adjustment parameters that determine the organization of the workflow, and the exhaust gas cleaning system, taking into account the reduction of fuel consumption. Design elements and geometric characteristics of structures for a turbocharged diesel engine of Д-245 series produced by JSC HMC Minsk Motor Plant (4ЧН11/12.5) with a capacity of 90 kW equipped with an electronically controlled battery fuel injection have been developed: exhaust gas recirculation along the high pressure circuit, shape and dimensions of the combustion chamber, the number and angular arrangement of the nozzle openings in a nozzle atomizer, and inlet channels of the cylinder head. Methods for organizing a workflow are proposed that take into account the shape of the indicator diagrams and affect the emissions of nitrogen oxides and dispersed particles differently. Their implementation allows us to determine the boundary ranges of changes in the control parameters of the fuel supply and exhaust gas recirculation systems when determining the area of minimizing the specific effective fuel consumption and the range of studies for the environmental performance of a diesel engine. The paper presents results of the study on the ways to meet  the requirements for emissions of harmful substances, obtained by considering options for the organization of working processes, taking into account the reduction in specific effective fuel consumption, changes in the average temperature of the exhaust gases and diesel equipment. To evaluate these methods, the following indicators have been identified: changes in specific fuel consumption and average temperature of the toxicity cycle relative to the base cycle, the necessary degree of conversion of the purification system for dispersed particles and NOx. Recommendations are given on choosing a diesel engine to meet Stage 4 emission standards for nitrogen oxides and dispersed particles.

Diesel Engine Intake Condition Control-Oriented Models for Active Fuel Injection Profile Control

2011 ◽  
Author(s):  
Fengjun Yan ◽  
Junmin Wang
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Combustion Process ◽  
Exhaust Gas Recirculation ◽  
High Fidelity ◽  
Exhaust Gas ◽  
Engine Model ◽  
Profile Control ◽  
Gas Recirculation

Fueling control in Diesel engines is not only of significance to the combustion process in one particular cycle, but also influences the subsequent dynamics of air-path loop and combustion events, particularly when exhaust gas recirculation (EGR) is employed. To better reveal such inherently interactive relations, this paper presents a physics-based, control-oriented model describing the dynamics of the intake conditions with fuel injection profile being its input for Diesel engines equipped with EGR and turbocharging systems. The effectiveness of this model is validated by comparing the predictive results with those produced by a high-fidelity 1-D computational GT-Power engine model.

Optimization of Engine Efficiency for Diesel Engine Equipped With EGR-VGT and Aftertreatment Systems

2019 ◽  
Author(s):  
Kuo Yang ◽  
Pingen Chen
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Intrinsic Property ◽  
Nox Emission ◽  
Nox Emissions ◽  
Minimum Phase ◽  
Engine Efficiency ◽  
Simulation Results ◽  
Aftertreatment Systems

Abstract Engine efficiency improvement is very critical for medium to heavy-duty vehicles to reduce Diesel fuel consumption and enhance U.S. energy security. The tradeoff between engine efficiency and NOx emissions is an intrinsic property that prevents modern Diesel engines, which are generally equipped with exhaust gas recirculation (EGR) and variable geometry turbocharger (VGT), from achieving the optimal engine efficiency while meeting the stringent NOx emission standards. The addition of urea-based selective catalytic reduction (SCR) systems to modern Diesel engine aftertreatment systems alleviate the burden of NOx emission control on Diesel engines, which in return creates extra freedom for optimizing Diesel engine efficiency. This paper proposes two model-based approaches to locate the optimal operating point of EGR and VGT in the air-path loop to maximize the indicated efficiency of turbocharged diesel engine. Simulation results demonstrated that the engine brake specific fuel consumption (BSFC) can be reduced by up to 1.6% through optimization of EGR and VGT, compared to a baseline EGR-VGT control which considers both NOx emissions and engine efficiency on engine side. The overall equivalent BSFCs are 1.8% higher with optimized EGR and VGT control than with the baseline control. In addition, the influence of reducing EGR valve opening on the non-minimum phase behavior of the air path loop is also analyzed. Simulation results showed slightly stronger non-minimum phase behaviors when EGR is fully closed.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

scholarly journals INFLUENCE OF THE BIODIESEL FUELS WITH MULTIFUNCTIONAL ADDITIVES ON THE DIESEL ENGINE EFFICIENCY

2015 ◽  
Author(s):  
Renaldas BARANAUSKAS ◽  
Risto ILVES ◽  
Arne KÜÜT ◽  
Jüri OLT
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Speed ◽  
Repeated Loading ◽  
Exhaust Gas ◽  
Maximum Torque ◽  
Engine Efficiency ◽  
Multifunctional Additives ◽  
Biodiesel Fuels

The article presents the tests of the engine Valmet 320 DS installed in the teststand "Schenck Dynas3 LI 250". For these tests biodiesel produced by JSC Rapsoila was used. The test was carried out causing the engine speed to 2600 rpm and loading gradually to maximum. Torque (Te), engine speed (ne), fuel consumption (Bf), the pressure in the cylinder (Pe) and exhaust gas CO, CO2, O2, HC, NOx were measured. Initially, measurements were carried out using biodiesel (RME). After that, biodiesel was added with the additive Valvoline VPS HD Diesel System Complete keeping a ratio of 100:1. In order to evaluate the effects of additives the engine was working two hours using biodiesel and additive mixture. After two hours the measurements were repeated loading the engine in the same mode. The work presents the results of tests carried out.

Sign in / Sign up

Export Citation Format

Share Document