scholarly journals Evaluation of the Shallow Geothermal Potential for Heating and Cooling and Its Integration in the Socioeconomic Environment: A Case Study in the Region of Murcia, Spain

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5740
Author(s):  
Adela Ramos-Escudero ◽  
M. Socorro García-Cascales ◽  
Javier F. Urchueguía
Keyword(s):  
Specific Heat ◽  
Geothermal Energy ◽  
Water Saturation ◽  
Regional Scale ◽  
Ghg Emissions ◽  
Heat Extraction ◽  
Heating And Cooling ◽  
Ground Source ◽  
Shallow Geothermal Energy ◽  
The Cost

In order to boost the use of shallow geothermal energy, reliable and sound information concerning its potential must be provided to the public and energy decision-makers, among others. To this end, we developed a GIS-based methodology that allowed us to estimate the resource, energy, economic and environmental potential of shallow geothermal energy at a regional scale. Our method focuses on closed-loop borehole heat exchanger systems, which are by far the systems that are most utilized for heating and cooling purposes, and whose energy demands are similar throughout the year in the study area applied. The resource was assessed based on the thermal properties from the surface to a depth of 100 m, considering the water saturation grade of the materials. Additionally, climate and building characteristics data were also used as the main input. The G.POT method was used for assessing the annual shallow geothermal resource and for the specific heat extraction (sHe) rate estimation for both heating and, for the first time, for cooling. The method was applied to the Region of Murcia (Spain) and thematic maps were created with the outputting results. They offer insight toward the thermal energy that can be extracted for both heating and cooling in (MWh/year) and (W/m); the technical potential, making a distinction over the climate zones in the region; the cost of the possible ground source heat pump (GSHP) installation, associated payback period and the cost of producing the shallow geothermal energy; and, finally, the GHG emissions savings derived from its usage. The model also output the specific heat extraction rates, which are compared to those from the VDI 4640, which prove to be slightly higher than the previous one.

scholarly journals Shallow geothermal energy in Denmark

1969 ◽  
Vol 26 ◽  
pp. 37-40
Author(s):  
Thomas Vangkilde-Pedersen ◽  
Claus Ditlefsen ◽  
Anker Lajer Højberg
Keyword(s):  
Co2 Emissions ◽  
Geothermal Energy ◽  
Best Practice ◽  
Fossil Fuels ◽  
Closed Loop ◽  
Energy Systems ◽  
Know How ◽  
Heating And Cooling ◽  
Ground Source ◽  
Shallow Geothermal Energy

The use of shallow geothermal energy instead of fossil fuels can lead to substantial reductions in CO2 emissions. However, the use of shallow geothermal energy in Denmark is limited compared to, e.g. Sweden and Germany and we still lack know-how and experience with its use in Denmark. In co-operation with research and industry partners, the Geological Survey of Denmark and Greenland is conducting a three-year project GeoEnergy, Tools for ground-source heating and cooling based on closed-loop boreholes (www.geoenergi.org). The objective of the project is to acquire knowledge and develop tools and best practice for the design and installation of shallow geothermal energy systems.

scholarly journals Economic justification of the choice of the thermal protection of buildings

2018 ◽  
Vol 196 ◽  
pp. 04078
Author(s):  
Elena Malyavina ◽  
Anastasya Frolova
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Specific Heat ◽  
Thermal Protection ◽  
Transfer Resistance ◽  
Cooling Systems ◽  
Heating And Cooling ◽  
Heat Protection ◽  
The Cost

A large number of factors influence the economically feasible heat transfer resistance of the building enclosing structures. First of all, it is the cost of insulation and heat for the building heating in the cold season. As shown by studies, it is not enough for air-conditioned buildings. The result depends on the mode of the building operation in time and the heat load on the heating and cooling systems. Therefore, in addition to these significant factors of economic feasibility of the thermal protection level, there are the cost of electricity for the production of cold for cooling the building, the cost of the building heating and cooling systems and the cost of connection to power supply networks. The got result is important to convey to the professional community in a clear and compact form. In the present work the buildings of administrative and office purpose are considered, the working day of which lasts from 9-00 to 18-00 hours with different specific heat supply from 0 to 80 W/m2 on the estimated area during working hours. Generalization of the research results is made on the basis of specific heat protection characteristics of the building, which is a product of the overall heat transfer coefficient of the building and the compactness coefficient. The total heat transfer coefficient of the building characterizes the heat losses and the heat inflows to the building through the enclosing structures, and the compactness coefficient can serve as an indicator of the surface area of the building, which is covered with insulation. For these buildings provision has been made for identification of the areas of the total discounted cost combination for all of the above components and the specific heat protection characteristics of the building relating to the feasibility of the specified level of the thermal protection.

scholarly journals Potential and Future Prospects of Geothermal Energy in Space Conditioning of Buildings: India and Worldwide Review

2020 ◽  
Vol 12 (20) ◽  
pp. 8428
Author(s):  
Vivek Aggarwal ◽  
Chandan Swaroop Meena ◽  
Ashok Kumar ◽  
Tabish Alam ◽  
Anuj Kumar ◽  
...  
Keyword(s):  
Geothermal Energy ◽  
Action Plan ◽  
Energy Utilization ◽  
Future Prospects ◽  
Heating And Cooling ◽  
Ground Source ◽  
Efficient Performance ◽  
Occupant Comfort ◽  
Generation Capacity ◽  
Air Conditioning Systems

This paper presents modern trends in geothermal energy utilization, mainly focusing on ground source heat (GSH) pumps for space conditioning in buildings. This paper focuses on India along with a general review of studies around the world. Space conditioning of a building contributes to about 40–50% of the total energy consumed in buildings and has an adverse impact on the environment and human health. The India Cooling Action Plan (ICAP) estimates that the demand for electricity for heating and cooling of buildings will increase by over 700% in India at current levels by 2047 with an additional 800 GW of power generation capacity needed just to meet heating and cooling needs by 2050, of which about 70% is required for the residential sector only. It further intensifies as the demand for peak electric load sharply increases in summer because of the extensive use of building air conditioning systems. Researchers across the globe have tried different cooling systems and found that some systems can offer a certain amount of energy-efficient performance, and also occupant comfort. Therefore, this article examines the geothermal potential in buildings for space conditioning by critically reviewing experimental and numerical studies along with the future prospects of GSH pumps.

scholarly journals BUILDINGS DESIGN INTEGRATION WITH GEOTHERMAL ENERGY SYSTEM TECHNOLOGIES AND AIR CONDITIONING APPLICATIONS

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Abeer Osama Radwan
Keyword(s):  
Geothermal Energy ◽  
Influence Factors ◽  
Energy System ◽  
Heat Pumps ◽  
Ground Source Heat Pumps ◽  
Human Thermal Comfort ◽  
Heating And Cooling ◽  
Ground Source ◽  
Modern Cities ◽  
Design Integration

Nowadays global warming and thermal islands in modern cities are spending much energy on heating and cooling spaces. Geothermal energy considered a renewable energy technology for space heating and cooling. The ground source heat pumps (GSHPs) are increasingly interested in their expressive potential to reduce fossil fuel consumption and hence reduce greenhouse gases. Geothermal energy used for both electricity generation and direct use, depending on the temperature and the chemistry of the resources. Recently, direct utilization has varied significantly, and there are several methods available for temperatures typically ranging from 4°C up to 80°C. (Lund J.W., 2012). This paper presents a comprehensive literature-based review of ground source heat pump technology, cooling, and heating applications buildings to achieve precisely human thermal comfort. Subsequently, propose the influence factors of the system components that would undoubtedly reflect on the optimal design of the building. As a result, achieve precisely an integrated building.

scholarly journals Assessment of the Potential Use of Shallow Geothermal Energy Source for Air Heating and Cooling in the Kingdom of Saudi Arabia

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
M. Ouzzane ◽  
M. T. Naqash ◽  
O. Harireche
Keyword(s):  
Saudi Arabia ◽  
Geothermal Energy ◽  
Air Cooling ◽  
Total Energy Consumption ◽  
Kingdom Of Saudi Arabia ◽  
Total Load ◽  
Heating And Cooling ◽  
Shallow Geothermal Energy ◽  
Almost All ◽  
Air Circulation

A large part of the total energy consumption in buildings in the Kingdom of Saudi Arabia (K.S.A.), is devoted to air cooling. This leads to high electricity costs for residents and a high amount of equivalent CO2 emissions. The work presented in this paper aims at evaluating and applying shallow geothermal energy for cooling and heating to reduce cost and environmental issues in the Kingdom. The system is based on the earth-air heat exchanger (EAHE) equipped with an air circulation fan. In this study, six cities have been selected; Madinah city, where our university is located, and five other cities representing five different climatic zones. A new parameter called “geothermal percentage” is proposed to calculate the ratio of geothermal energy to the cooling/heating total load. It has been shown that the proposed system covers part of the cooling load and the total heating needs for almost all the country’s territory. However, both heating and cooling needs can be fulfilled by the EAHE for few cities such as Guriiat and Khamis, characterized by a moderate climate.

Modeling Neighborhood-Scale Shallow Geothermal Energy Utilization - A Case Study in Berlin

2021 ◽  
Author(s):  
Shuang Chen ◽  
Jakob Randow ◽  
Katrin Lubashevsky ◽  
Steve Thiel ◽  
Tom Reinhardt ◽  
...  
Keyword(s):  
Geothermal Energy ◽  
Model Comparison ◽  
Energy Utilization ◽  
Fluid Temperature ◽  
Load Curve ◽  
Geothermal Heat ◽  
Heating And Cooling ◽  
Shallow Geothermal Energy ◽  
Neighborhood Scale ◽  
Set Up

<p>Nowadays, utilizing shallow geothermal energy for heating and cooling buildings has received increased interest in the energy market. Among different technologies, large borehole heat exchanger (BHE) arrays are widely employed to supply heat to various types of buildings and districts. Recently, a 16-BHE array was constructed to extract shallow geothermal energy to provide heat to the newly-developed public building in Berlin. According to the previous geological survey, different non-homogeneous sedimentary layers exist in the subsurface, with variating groundwater permeabilities and thermal parameters. To estimate the performance of the BHE array system, and its sensitivity to different subsurface conditions, as well as to determine its thermal impact to the surrounding area, a comprehensive 3D numerical model has been set up according to the Berlin BHE array project. The model is simulated for 25 years with two finite element simulators, the open source code software OpenGeoSys (OGS) and the well-known commercial software FEFLOW. In the model, an annual thermal load curve is assigned to each BHE according to the real monthly heating demand. Although the way of the implementing parameters in the two programs differs from each other and some assumptions had to be made in the model comparison, the comparison result shows that both OpenGeoSys and FEFLOW produce in good agreement. Different parameters, e.g. the Darcy velocity, the thermal dispersivity of the aquifer, the surface temperature and the geothermal heat flux are investigated with respect to their impact on the underground and BHE circulation temperature. At last, the computed underground temperature and the brine fluid temperature evolution from OGS is benchmarked with the results from the model simulated in FEFLOW. The numerical experiments show that the the ground water field has the strongest influence on the brine fluid temperature within the BHEs. When the thermal dispersivity of the aquifer is considered, the mixing effect in the aquifer leads to a higher brine fluid temperature in the BHE, indicating a better thermal recharge of the system.</p>

scholarly journals Shallow geothermal energy potential of south-west Germany

2021 ◽  
Author(s):  
Johannes Miocic
Keyword(s):  
Large Scale ◽  
Heat Pumps ◽  
West Germany ◽  
Heat Extraction ◽  
Scale Transformation ◽  
Energy Potential ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source ◽  
Geological Conditions

<p>A large-scale transformation of the heating and cooling sector is needed to achieve the climate neutrality goals by 2050 as outlined in the European Green Deal. One frequently discussed option for reducing the greenhouse gas emissions is the widespread use of ground source heat pumps (GSHPs) for heating and cooling living spaces. Here, the technical potential of GSHPs to supply heat to buildings in the state of Baden-Württemberg, Germany, is analysed. This study is based on the yearly demand for heating energy at a building block scale, geological conditions, mean annual surface temperatures, as well as legal restrictions such as temperature differences at the heat pump, maximum monthly heat extraction rates as well as areas restricted from drilling. It is shown that for many densely populated areas many GSHPs would be needed to supply all the energy needed for heating. However, in less densely populated areas GSHPs can be used for heating. If future heating demand is lower due to wide-spread insulation retrofitting, GSHPs could supply most of the energy needed for heating even in densely populated areas.</p>

scholarly journals Geothermal energy: shallow sources

2014 ◽  
Vol 126 (2) ◽  
pp. 25
Author(s):  
Ian Johnston
Keyword(s):  
Heat Pump ◽  
Geothermal Energy ◽  
Heat Pumps ◽  
Cooling Mode ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source ◽  
Heating Mode ◽  
To Receive ◽  
Ground Energy

Below a depth of around 5 to 8 metres below the surface, the ground displays a temperature which is effectively constant and a degree or two above the weighted mean annual air temperature at that particular location. In Melbourne, the ground temperature at this depth is around 18°C with temperatures at shallower depths varying according the season. Further north, these constant temperatures increase a little; while for more southern latitudes, the temperatures are a few degrees cooler. Shallow source geothermal energy (also referred to as direct geothermal energy, ground energy using ground source heat pumps and geoexchange) uses the ground and its temperatures to depths of a few tens of metres as a heat source in winter and a heat sink in summer for heating and cooling buildings. Fluid (usually water) is circulated through a ground heat exchanger (or GHE, which comprises pipes built into building foundations, or in specifically drilled boreholes or trenches), and back to the surface. In heating mode, heat contained in the circulating fluid is extracted by a ground source heat pump (GSHP) and used to heat the building. The cooled fluid is reinjected into the ground loops to heat up again to complete the cycle. In cooling mode, the system is reversed with heat taken out of the building transferred to the fluid which is injected underground to dump the extra heat to the ground. The cooled fluid then returns to the heat pump to receive more heat from the building.

Geothermal energy potential of sedimentary formations in the Athabasca region, northeast Alberta, Canada

2016 ◽  
Vol 4 (4) ◽  
pp. SR19-SR33 ◽  
Author(s):  
Elahe P. Ardakani ◽  
Douglas R. Schmitt
Keyword(s):  
Thermal Energy ◽  
Geothermal Energy ◽  
Oil Sands ◽  
Fossil Fuels ◽  
Greenhouse Gas Emission ◽  
Energy Content ◽  
Regional Scale ◽  
Heat Extraction ◽  
Sequential Gaussian Simulation ◽  
Energy Potential

The Athabasca region, located in the northeast of Alberta, Canada, hosts many ongoing projects of bitumen extraction from oil sands and Devonian carbonate and siliciclastic reservoirs, which require a vast amount of thermal energy. Geothermal energy as a green renewable source of heat can help to reduce the amount of fossil fuels used to provide the required thermal energy for these projects and consequently decrease the greenhouse gas emission. To assess the geothermal development potential in this region, an integrated regional-scale 3D model was constructed with geologic and geophysical data (approximately 7000 formation tops and approximately 800 km seismic 2D profiles). Incorporation of 2D seismic profiles that filled in the gaps between sparse geologic tops particularly for deeper formations adds to structural details of the modeled formations. The temperature and porosity fields were simulated using the sequential Gaussian simulation approach within the modeled sedimentary formations. Based on spatial distribution, thickness, formation porosity and permeability analysis, five Paleozoic formations of Keg River, Waterways, Cooking Lake, Leduc, and Grosmont were identified as potential aquifers for geothermal development. These aquifers have enough coverage and thickness in the area and possess a high amount of thermal energy content. Because the sedimentary basin in the Athabasca region is quite shallow (less than 1400 m), these aquifers are all recognized as low enthalpy geothermal reservoirs with maximum of 40°C temperature and hence direct heating applications are not feasible. Use of industrial-scale heat-pump technologies that have long been used in northern Europe with high coefficients of performance would be recommended for heat extraction from these reservoirs.

Sign in / Sign up

Export Citation Format

Share Document