scholarly journals Shallow geothermal energy in Denmark

1969 ◽  
Vol 26 ◽  
pp. 37-40
Author(s):  
Thomas Vangkilde-Pedersen ◽  
Claus Ditlefsen ◽  
Anker Lajer Højberg
Keyword(s):  
Co2 Emissions ◽  
Geothermal Energy ◽  
Best Practice ◽  
Fossil Fuels ◽  
Closed Loop ◽  
Energy Systems ◽  
Know How ◽  
Heating And Cooling ◽  
Ground Source ◽  
Shallow Geothermal Energy

The use of shallow geothermal energy instead of fossil fuels can lead to substantial reductions in CO2 emissions. However, the use of shallow geothermal energy in Denmark is limited compared to, e.g. Sweden and Germany and we still lack know-how and experience with its use in Denmark. In co-operation with research and industry partners, the Geological Survey of Denmark and Greenland is conducting a three-year project GeoEnergy, Tools for ground-source heating and cooling based on closed-loop boreholes (www.geoenergi.org). The objective of the project is to acquire knowledge and develop tools and best practice for the design and installation of shallow geothermal energy systems.

scholarly journals Evaluation of the Shallow Geothermal Potential for Heating and Cooling and Its Integration in the Socioeconomic Environment: A Case Study in the Region of Murcia, Spain

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5740
Author(s):  
Adela Ramos-Escudero ◽  
M. Socorro García-Cascales ◽  
Javier F. Urchueguía
Keyword(s):  
Specific Heat ◽  
Geothermal Energy ◽  
Water Saturation ◽  
Regional Scale ◽  
Ghg Emissions ◽  
Heat Extraction ◽  
Heating And Cooling ◽  
Ground Source ◽  
Shallow Geothermal Energy ◽  
The Cost

In order to boost the use of shallow geothermal energy, reliable and sound information concerning its potential must be provided to the public and energy decision-makers, among others. To this end, we developed a GIS-based methodology that allowed us to estimate the resource, energy, economic and environmental potential of shallow geothermal energy at a regional scale. Our method focuses on closed-loop borehole heat exchanger systems, which are by far the systems that are most utilized for heating and cooling purposes, and whose energy demands are similar throughout the year in the study area applied. The resource was assessed based on the thermal properties from the surface to a depth of 100 m, considering the water saturation grade of the materials. Additionally, climate and building characteristics data were also used as the main input. The G.POT method was used for assessing the annual shallow geothermal resource and for the specific heat extraction (sHe) rate estimation for both heating and, for the first time, for cooling. The method was applied to the Region of Murcia (Spain) and thematic maps were created with the outputting results. They offer insight toward the thermal energy that can be extracted for both heating and cooling in (MWh/year) and (W/m); the technical potential, making a distinction over the climate zones in the region; the cost of the possible ground source heat pump (GSHP) installation, associated payback period and the cost of producing the shallow geothermal energy; and, finally, the GHG emissions savings derived from its usage. The model also output the specific heat extraction rates, which are compared to those from the VDI 4640, which prove to be slightly higher than the previous one.

scholarly journals Sustainable energy path

2005 ◽  
Vol 9 (3) ◽  
pp. 7-14 ◽  
Author(s):  
Hiromi Yamamoto ◽  
Kenji Yamaji
Keyword(s):  
Energy Consumption ◽  
Co2 Emissions ◽  
Fossil Fuels ◽  
Cost Minimization ◽  
Sustainable Energy ◽  
Energy Systems ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Photo Voltaic ◽  
Global Energy Supply

The uses of fossil fuels cause not only the resources exhaustion but also the environmental problems such as global warming. The purposes of this study are to evaluate paths to ward sustainable energy systems and roles of each renewable. In order to realize the purposes, the authors developed the global land use and energy model that figured the global energy supply systems in the future considering the cost minimization. Using the model the authors conducted a simulation in C30R scenario, which is a kind of strict CO2 emission limit scenarios and reduced CO2 emissions by 30% compared with Kyoto protocol forever scenario, and obtained the following results. In C30R scenario bio energy will supply 33% of all the primary energy consumption. How ever, wind and photo voltaic will supply 1.8% and 1.4% of all the primary energy consumption, respectively, because of the limits of power grid stability. The results imply that the strict limits of CO2 emissions are not sufficient to achieve the complete renewable energy systems. In order to use wind and photo voltaic as major energy resources we need not only to reduce the plant costs but also to develop unconventional renewable technologies. .

scholarly journals Ground Source Heat Pumps: Considerations for Large Facilities in Massachusetts

2020 ◽  
Author(s):  
Eric Wagner ◽  
Benjamin McDaniel ◽  
Dragoljub Kosanovic
Keyword(s):  
Co2 Emissions ◽  
Current System ◽  
Cost Benefit ◽  
Heating System ◽  
Heat Pumps ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source ◽  
Industry Standards ◽  
Conventional Cooling

Ground-source heat pump (GSHP) systems have been implemented at large scales on several university campuses to provide heating and cooling. In this study, we test the idea that a GSHP system, as a replacement for an existing Combined Heat and Power (CHP) heating system coupled with conventional cooling systems, could reduce CO2 emissions, and provide a cost benefit to a university campus. We use the existing recorded annual heating and cooling loads supplied by the current system and an established technique of modeling the heat pumps and borehole heat exchangers (BHEs) using a TRNSYS model. The GSHP system is modeled to follow the parameters of industry standards and sized to provide an optimal balance of capital and operating costs. Results show that despite a decrease in heating and cooling energy usage and CO2 emissions are achieved, a significant increase in electric demand and purchased electricity result in an overall cost increase. These results highlight the need for thermal energy storage, onsite distributed energy resources and/or demand response in cases where electric heat pumps are used to help mitigate electric demand during peak periods.

scholarly journals Potential and Future Prospects of Geothermal Energy in Space Conditioning of Buildings: India and Worldwide Review

2020 ◽  
Vol 12 (20) ◽  
pp. 8428
Author(s):  
Vivek Aggarwal ◽  
Chandan Swaroop Meena ◽  
Ashok Kumar ◽  
Tabish Alam ◽  
Anuj Kumar ◽  
...  
Keyword(s):  
Geothermal Energy ◽  
Action Plan ◽  
Energy Utilization ◽  
Future Prospects ◽  
Heating And Cooling ◽  
Ground Source ◽  
Efficient Performance ◽  
Occupant Comfort ◽  
Generation Capacity ◽  
Air Conditioning Systems

This paper presents modern trends in geothermal energy utilization, mainly focusing on ground source heat (GSH) pumps for space conditioning in buildings. This paper focuses on India along with a general review of studies around the world. Space conditioning of a building contributes to about 40–50% of the total energy consumed in buildings and has an adverse impact on the environment and human health. The India Cooling Action Plan (ICAP) estimates that the demand for electricity for heating and cooling of buildings will increase by over 700% in India at current levels by 2047 with an additional 800 GW of power generation capacity needed just to meet heating and cooling needs by 2050, of which about 70% is required for the residential sector only. It further intensifies as the demand for peak electric load sharply increases in summer because of the extensive use of building air conditioning systems. Researchers across the globe have tried different cooling systems and found that some systems can offer a certain amount of energy-efficient performance, and also occupant comfort. Therefore, this article examines the geothermal potential in buildings for space conditioning by critically reviewing experimental and numerical studies along with the future prospects of GSH pumps.

scholarly journals BUILDINGS DESIGN INTEGRATION WITH GEOTHERMAL ENERGY SYSTEM TECHNOLOGIES AND AIR CONDITIONING APPLICATIONS

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Abeer Osama Radwan
Keyword(s):  
Geothermal Energy ◽  
Influence Factors ◽  
Energy System ◽  
Heat Pumps ◽  
Ground Source Heat Pumps ◽  
Human Thermal Comfort ◽  
Heating And Cooling ◽  
Ground Source ◽  
Modern Cities ◽  
Design Integration

Nowadays global warming and thermal islands in modern cities are spending much energy on heating and cooling spaces. Geothermal energy considered a renewable energy technology for space heating and cooling. The ground source heat pumps (GSHPs) are increasingly interested in their expressive potential to reduce fossil fuel consumption and hence reduce greenhouse gases. Geothermal energy used for both electricity generation and direct use, depending on the temperature and the chemistry of the resources. Recently, direct utilization has varied significantly, and there are several methods available for temperatures typically ranging from 4°C up to 80°C. (Lund J.W., 2012). This paper presents a comprehensive literature-based review of ground source heat pump technology, cooling, and heating applications buildings to achieve precisely human thermal comfort. Subsequently, propose the influence factors of the system components that would undoubtedly reflect on the optimal design of the building. As a result, achieve precisely an integrated building.

scholarly journals Assessment of the Potential Use of Shallow Geothermal Energy Source for Air Heating and Cooling in the Kingdom of Saudi Arabia

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
M. Ouzzane ◽  
M. T. Naqash ◽  
O. Harireche
Keyword(s):  
Saudi Arabia ◽  
Geothermal Energy ◽  
Air Cooling ◽  
Total Energy Consumption ◽  
Kingdom Of Saudi Arabia ◽  
Total Load ◽  
Heating And Cooling ◽  
Shallow Geothermal Energy ◽  
Almost All ◽  
Air Circulation

A large part of the total energy consumption in buildings in the Kingdom of Saudi Arabia (K.S.A.), is devoted to air cooling. This leads to high electricity costs for residents and a high amount of equivalent CO2 emissions. The work presented in this paper aims at evaluating and applying shallow geothermal energy for cooling and heating to reduce cost and environmental issues in the Kingdom. The system is based on the earth-air heat exchanger (EAHE) equipped with an air circulation fan. In this study, six cities have been selected; Madinah city, where our university is located, and five other cities representing five different climatic zones. A new parameter called “geothermal percentage” is proposed to calculate the ratio of geothermal energy to the cooling/heating total load. It has been shown that the proposed system covers part of the cooling load and the total heating needs for almost all the country’s territory. However, both heating and cooling needs can be fulfilled by the EAHE for few cities such as Guriiat and Khamis, characterized by a moderate climate.

GES-CAL: A new computer program for the design of closed-loop geothermal energy systems

Geothermics ◽  
2020 ◽  
Vol 87 ◽  
pp. 101852 ◽  
Author(s):  
Cristina Sáez Bláquez ◽  
Ignacio Martín Nieto ◽  
Rocío Mora ◽  
Arturo Farfán Martín ◽  
Diego González-Aguilera
Keyword(s):  
Computer Program ◽  
Geothermal Energy ◽  
Closed Loop ◽  
Energy Systems

Modeling Neighborhood-Scale Shallow Geothermal Energy Utilization - A Case Study in Berlin

2021 ◽  
Author(s):  
Shuang Chen ◽  
Jakob Randow ◽  
Katrin Lubashevsky ◽  
Steve Thiel ◽  
Tom Reinhardt ◽  
...  
Keyword(s):  
Geothermal Energy ◽  
Model Comparison ◽  
Energy Utilization ◽  
Fluid Temperature ◽  
Load Curve ◽  
Geothermal Heat ◽  
Heating And Cooling ◽  
Shallow Geothermal Energy ◽  
Neighborhood Scale ◽  
Set Up

<p>Nowadays, utilizing shallow geothermal energy for heating and cooling buildings has received increased interest in the energy market. Among different technologies, large borehole heat exchanger (BHE) arrays are widely employed to supply heat to various types of buildings and districts. Recently, a 16-BHE array was constructed to extract shallow geothermal energy to provide heat to the newly-developed public building in Berlin. According to the previous geological survey, different non-homogeneous sedimentary layers exist in the subsurface, with variating groundwater permeabilities and thermal parameters. To estimate the performance of the BHE array system, and its sensitivity to different subsurface conditions, as well as to determine its thermal impact to the surrounding area, a comprehensive 3D numerical model has been set up according to the Berlin BHE array project. The model is simulated for 25 years with two finite element simulators, the open source code software OpenGeoSys (OGS) and the well-known commercial software FEFLOW. In the model, an annual thermal load curve is assigned to each BHE according to the real monthly heating demand. Although the way of the implementing parameters in the two programs differs from each other and some assumptions had to be made in the model comparison, the comparison result shows that both OpenGeoSys and FEFLOW produce in good agreement. Different parameters, e.g. the Darcy velocity, the thermal dispersivity of the aquifer, the surface temperature and the geothermal heat flux are investigated with respect to their impact on the underground and BHE circulation temperature. At last, the computed underground temperature and the brine fluid temperature evolution from OGS is benchmarked with the results from the model simulated in FEFLOW. The numerical experiments show that the the ground water field has the strongest influence on the brine fluid temperature within the BHEs. When the thermal dispersivity of the aquifer is considered, the mixing effect in the aquifer leads to a higher brine fluid temperature in the BHE, indicating a better thermal recharge of the system.</p>

Sign in / Sign up

Export Citation Format

Share Document