scholarly journals Compensation of Data Loss Using ARMAX Model in State Estimation for Control and Communication Systems Applications

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7573
Author(s):  
Syed Abuzar Bacha ◽  
Gulzar Ahmad ◽  
Ghulam Hafeez ◽  
Fahad R. Albogamy ◽  
Sadia Murawwat
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Autoregressive Model ◽  
Communication Systems ◽  
Closed Loop ◽  
The State ◽  
Data Loss ◽  
The Past ◽  
Challenging Issue ◽  
Proposed Model

Compensation of data loss in the state estimation plays an indispensable role in efficient and stable control and communication systems. However, accurate compensation of data loss in the state estimation is extremely challenging issue. To cater this challenging issue, two techniques such as the open-loop Kalman filter and the compensating closed-loop Kalman filter have emerged. The closed-loop technique compensates for the missing data using the autoregressive model. However, the autoregressive model used only past measurements for data loss compensation. Considering only one parameter, i.e., the past measurements, is insufficient and leads to inaccurate state estimation. Thus, in this work, autoregressive moving average with exogenous inputs model considers three parameters, i.e., the past measurements, the input signal, and the sensor noise, simultaneously to compensate data loss in state estimation. To endorse the effectiveness and applicability of the proposed model, a standard mass-spring-damper is employed in the case study. Simulation results show that the proposed model outperforms the existing autoregressive models in terms of performance parameters.

scholarly journals A Strong Tracking Mixed-Degree Cubature Kalman Filter Method and Its Application in a Quadruped Robot

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2251 ◽  
Author(s):  
Jikai Liu ◽  
Pengfei Wang ◽  
Fusheng Zha ◽  
Wei Guo ◽  
Zhenyu Jiang ◽  
...  
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Real Time ◽  
Quadruped Robot ◽  
The State ◽  
Estimation Accuracy ◽  
Robot System ◽  
Calculation Time ◽  
Motion State ◽  
Cubature Kalman Filter

The motion state of a quadruped robot in operation changes constantly. Due to the drift caused by the accumulative error, the function of the inertial measurement unit (IMU) will be limited. Even though multi-sensor fusion technology is adopted, the quadruped robot will lose its ability to respond to state changes after a while because the gain tends to be constant. To solve this problem, this paper proposes a strong tracking mixed-degree cubature Kalman filter (STMCKF) method. According to system characteristics of the quadruped robot, this method makes fusion estimation of forward kinematics and IMU track. The combination mode of traditional strong tracking cubature Kalman filter (TSTCKF) and strong tracking is improved through demonstration. A new method for calculating fading factor matrix is proposed, which reduces sampling times from three to one, saving significantly calculation time. At the same time, the state estimation accuracy is improved from the third-degree accuracy of Taylor series expansion to fifth-degree accuracy. The proposed algorithm can automatically switch the working mode according to real-time supervision of the motion state and greatly improve the state estimation performance of quadruped robot system, exhibiting strong robustness and excellent real-time performance. Finally, a comparative study of STMCKF and the extended Kalman filter (EKF) that is commonly used in quadruped robot system is carried out. Results show that the method of STMCKF has high estimation accuracy and reliable ability to cope with sudden changes, without significantly increasing the calculation time, indicating the correctness of the algorithm and its great application value in quadruped robot system.

scholarly journals Ellipsoidal and Gaussian Kalman Filter Model for Discrete-Time Nonlinear Systems

Mathematics ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 1168 ◽  
Author(s):  
Ligang Sun ◽  
Hamza Alkhatib ◽  
Boris Kargoll ◽  
Vladik Kreinovich ◽  
Ingo Neumann
Keyword(s):  
Kalman Filter ◽  
Nonlinear Systems ◽  
State Estimation ◽  
Discrete Time ◽  
Probability Distributions ◽  
Nonlinear Problems ◽  
The State ◽  
Filter Model ◽  
Highly Nonlinear ◽  
Correction Step

In this paper, we propose a new technique—called Ellipsoidal and Gaussian Kalman filter—for state estimation of discrete-time nonlinear systems in situations when for some parts of uncertainty, we know the probability distributions, while for other parts of uncertainty, we only know the bounds (but we do not know the corresponding probabilities). Similarly to the usual Kalman filter, our algorithm is iterative: on each iteration, we first predict the state at the next moment of time, and then we use measurement results to correct the corresponding estimates. On each correction step, we solve a convex optimization problem to find the optimal estimate for the system’s state (and the optimal ellipsoid for describing the systems’s uncertainty). Testing our algorithm on several highly nonlinear problems has shown that the new algorithm performs the extended Kalman filter technique better—the state estimation technique usually applied to such nonlinear problems.

scholarly journals Performance and stochastic stability of the adaptive fading extended Kalman filter with the matrix forgetting factor

2016 ◽  
Vol 14 (1) ◽  
pp. 934-945
Author(s):  
Cenker Biçer ◽  
Levent Özbek ◽  
Hasan Erbay
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Extended Kalman Filter ◽  
Stochastic Systems ◽  
Estimation Error ◽  
The State ◽  
Forgetting Factor ◽  
The Matrix ◽  
Stochastic Framework ◽  
Theoretical Results

AbstractIn this paper, the stability of the adaptive fading extended Kalman filter with the matrix forgetting factor when applied to the state estimation problem with noise terms in the non–linear discrete–time stochastic systems has been analysed. The analysis is conducted in a similar manner to the standard extended Kalman filter’s stability analysis based on stochastic framework. The theoretical results show that under certain conditions on the initial estimation error and the noise terms, the estimation error remains bounded and the state estimation is stable.The importance of the theoretical results and the contribution to estimation performance of the adaptation method are demonstrated interactively with the standard extended Kalman filter in the simulation part.

Optimal control of the digital twin of the enterprise.

2021 ◽  
Vol 5 ◽  
Author(s):  
S.N. Masaev ◽  
Keyword(s):  
Optimal Control ◽  
Kalman Filter ◽  
Computational Complexity ◽  
Execution Time ◽  
The State ◽  
Control Methods ◽  
Optimal Ratio ◽  
Digital Twin ◽  
The Past ◽  
Production Processes

The enterprise is presented as a digital twin of interrelated production processes, support processes and administrative processes. A semantic indicator for a general assessment of the state of the system at different points in time is given. The semantic indicator is applied to assess the optimal control by Kalman filter. The obtained estimates of optimal control make it possible to take into account the resources consumed by the processes in the past periods. The obtained optimal control can be used with other control methods through control and observation matrices. Estimates of the optimal ratio of values are obtained: the amount of the resource in the system, the method of attracting the resource, the execution time of the method, the computational complexity of the method.

A novel cubature statistically linearized Kalman filter for fractional-order nonlinear discrete-time stochastic systems

2017 ◽  
Vol 24 (24) ◽  
pp. 5880-5897 ◽  
Author(s):  
Hamed Torabi ◽  
Naser Pariz ◽  
Ali Karimpour
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Extended Kalman Filter ◽  
Fractional Order ◽  
Discrete Time ◽  
Stochastic Systems ◽  
Taylor Series Expansion ◽  
The State ◽  
Nonlinear Functions ◽  
Measurement Models

In this paper, the state estimation problem for fractional-order nonlinear discrete-time stochastic systems is considered. A new method for the state estimation of fractional nonlinear systems using the statistically linearized method and cubature transform is presented. The fractional extended Kalman filter suffers from two problems. Firstly, the dynamic and measurement models must be differentiable and, secondly, nonlinearity is approximated by neglecting the higher order terms in the Taylor series expansion; by the proposed method in this paper, these problems can be solved using a statistically linearized algorithm for the linearization of fractional nonlinear dynamics and cubature transform for calculating the expected values of the nonlinear functions. The effectiveness of this proposed method is demonstrated through simulation results and its superiority is shown by comparing our method with some other present methods, such as the fractional extended Kalman filter.

scholarly journals Iterative LQG Controller Design Through Closed-Loop Identification

1996 ◽  
Vol 118 (2) ◽  
pp. 366-372 ◽  
Author(s):  
Min-Hung Hsiao ◽  
Jen-Kuang Huang ◽  
David E. Cox
Keyword(s):  
Kalman Filter ◽  
State Feedback ◽  
Closed Loop ◽  
Controller Design ◽  
Open Loop ◽  
The State ◽  
Magnetic Suspension ◽  
Loop Model ◽  
Closed Loop Identification ◽  
Noise Statistics

This paper presents an iterative LQG controller design approach for a linear stochastic system with an uncertain openloop model and unknown noise statistics. This approach consists of closed-loop identification and controller redesign cycles. In each cycle, the closed-loop identification method is used to identify an open-loop model and a steady-state Kalman filter gain from closed-loop input/output test data obtained by using a feedback LQG controller designed from the previous cycle. Then the identified open-loop model is used to redesign the state feedback. The state feedback and the identified Kalman filter gain are used to form an updated LQG controller for the next cycle. This iterative process continues until the updated controller converges. The proposed controller design is demonstrated by numerical simulations and experiments on a highly unstable large-gap magnetic suspension system.

Sign in / Sign up

Export Citation Format

Share Document