scholarly journals Parameter Variability in Viscous Convection

Fluids ◽  
2021 ◽  
Vol 6 (11) ◽  
pp. 376
Author(s):  
Ekkehard Holzbecher
Keyword(s):  
Laboratory Experiments ◽  
Numerical Models ◽  
Vertical Cylinder ◽  
Flow Patterns ◽  
Cfd Models ◽  
Heating And Cooling ◽  
Dynamic Phase ◽  
Order Of Magnitude ◽  
Convective Motions ◽  
Computational Fluid Dynamics Cfd

For the optimal design of cooling and heating devices, the properties of the included fluids are crucial. The temperature dependence of viscosity deserves attention, as changes can be one order of magnitude or more. Here we examine the influence on convective motions by simulating a heating and cooling experiment with a vertical cylinder by finite element computational fluid dynamics (CFD) models. Such an experimental setup in which flow patterns are determined by transient viscous convection has not been simulated before. Evaluating the general behavior of the experiment in 2D, we find a dynamic phase after and before phases with moderate changes. Flow patterns in the dynamic phase change significantly with the temperature range of the experiment. We compare the outcome of the numerical models with results from laboratory experiments, finding major discrepancies concerning the flow patterns in the dynamic phase. 3D modeling shows weaker dynamics but does not show good timing with the experiment. The study depicts the importance of parameter dependencies for convective motions and demonstrates the capabilities and limitations of models to reproduce details of viscous convection.

Experimentally Calibrated Time-Domain Numerical Model for a Fixed OWC Device

2013 ◽  
Author(s):  
Arantza Iturrioz ◽  
Raúl Guanche ◽  
José A. Armesto ◽  
César Vidal ◽  
Íñigo J. Losada
Keyword(s):  
Time Domain ◽  
Numerical Models ◽  
Field Testing ◽  
Domain Model ◽  
Simple Problem ◽  
Cfd Models ◽  
First Approximation ◽  
Column Technology ◽  
Computational Fluid Dynamics Cfd ◽  
Correct Understanding

Oscillating Water Column technology (OWC) is one of the most promising Wave energy Converter (WEC) technologies. Different OWC devices are nowadays under development: fixed or floating, with one or several chambers. The correct understanding and efficient modelling of the simple problem of a fixed detached OWC is the basis of all of them. For this aim, a combined numerical-experimental working methodology has been followed, since it is believed to be the only way to make a real step forward in this field. Due to the high economic and time costs of experimental and field testing, the use of reliable numerical models is essential, especially during the early stages of the development. For this purpose, numerical models need to be calibrated and validated based on experimental data, ensuring realistic tools for OWC analysis. Computational Fluid Dynamics (CFD) models are widely considered the best way to analyze the dynamics involved in the problem. However, these models are complex and high computational demanding and the accuracy they offer is not necessary for a first approximation to the problem. Therefore, a simplified and faster time-domain model was built for the first stages of WEC analysis.

Investigating the Effect of Power Distribution on Cooling a Double-Sided PCB: Numerical Simulation and Experiment

2005 ◽  
Author(s):  
Jonas Johansson ◽  
Ilja Belov ◽  
Peter Leisner
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Power Distribution ◽  
Laboratory Experiments ◽  
Experimental Procedure ◽  
Cfd Models ◽  
Temperature Environment ◽  
Simulation And Experiment ◽  
Computational Fluid Dynamics Cfd ◽  
Cooling Methods

An experimental procedure for investigating the effect of power distribution on the cooling of a double-sided PCB is implemented. A number of computational fluid dynamics (CFD) models are validated by laboratory experiments performed in 19.5°C temperature environment. Case temperatures of surface-mounted components fully populating the PCB sides are measured and monitored in simulations. Different combinations of power distribution with other cooling methods, such as a heatsink tooled on a sealed or open enclosure, at natural or forced convection, are studied. Thermally efficient uniform and non-uniform power configurations are determined on a double sided PCB. It is concluded that managing power distribution on a double-sided PCB can be considered as a measure to improve the thermal performance of electronic modules.

Multi-Dimensional CFD Analysis of Rotating Blades in a Lawnmower Deck

2002 ◽  
Author(s):  
P. A. Hagen ◽  
W. Chon ◽  
R. S. Amano
Keyword(s):  
High Speed ◽  
Video Camera ◽  
Flow Patterns ◽  
Cfd Analysis ◽  
Rotating Blades ◽  
Cfd Models ◽  
High Speed Video Camera ◽  
Computational Fluid Dynamics Cfd ◽  
And Behavior ◽  
Blade Model

Aerodynamic experimentation and investigation of rotating blades has pioneered the research necessary for innovative lawnmower design. In this study, Computational Fluid Dynamics (CFD) models are generated for single and triple-blade arrangements to analyze their flow patterns and behavior. For the 2-D CFD analysis, blade profiles at several arbitrary radial sections have been selected for flow computations around the blade model. Likewise, the 3-D CFD analysis effectively simulates the flow patterns inside the entire triple-blade mower deck, as well as in single-blade enclosures. The accuracy of the attained CFD solutions was determined through comparison with experimental data. The flow behaviors were observed using both Laser Doppler Velocimetry (LDV) and a high-speed video camera recording at 2000 frames per second. Strain gage and pressure transducer analysis also aided in the correlative effort. It has been observed that both the mower deck configuration and blade profile share equal significance in the resultant flow profiles.

Predicting Hydrodynamic and Heat Transfer Effects of Sparger Geometry and Placement Within a Column Photobioreactor Using Computational Fluid Dynamics

2014 ◽  
Vol 11 (3) ◽  
Author(s):  
Ghazi S. Bari ◽  
Taylor N. Suess ◽  
Gary A. Anderson ◽  
Stephen P. Gent
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Porous Membrane ◽  
Flow Patterns ◽  
Transfer Effects ◽  
Eulerian Approach ◽  
Cfd Models ◽  
Computational Fluid Dynamics Cfd ◽  
Heat Transfer Effects

This research investigates the effects of the sparger on flow patterns and heat transfer within a column photobioreactor (PBR) using computational fluid dynamics (CFD). This study compares two types of spargers: a porous membrane, which occupies the entire floor of the reactor, and a single sparger, which is located along the centerline of the PBR floor. The PBR is modeled using the Lagrangian–Eulerian approach. The objective of this research is to predict the performance of PBRs using CFD models, which can be used to improve the design of PBRs used to grow microalgae that are used to produce biofuels and bioproducts.

scholarly journals Preliminary Results on the Dynamics of a Pile-Moored Fish Cage with Elastic Net in Currents and Waves

2020 ◽  
Vol 9 (1) ◽  
pp. 14
Author(s):  
Gianluca Zitti ◽  
Nico Novelli ◽  
Maurizio Brocchini
Keyword(s):  
Numerical Model ◽  
Laboratory Experiments ◽  
Numerical Models ◽  
Offshore Structures ◽  
Fish Farm ◽  
Maximum Displacement ◽  
Drag Forces ◽  
Real Size ◽  
Lift And Drag ◽  
Mesh Grid

Over the last decades, the aquaculture sector increased significantly and constantly, moving fish-farm plants further from the coast, and exposing them to increasingly high forces due to currents and waves. The performances of cages in currents and waves have been widely studied in literature, by means of laboratory experiments and numerical models, but virtually all the research is focused on the global performances of the system, i.e., on the maximum displacement, the volume reduction or the mooring tension. In this work we propose a numerical model, derived from the net-truss model of Kristiansen and Faltinsen (2012), to study the dynamics of fish farm cages in current and waves. In this model the net is modeled with straight trusses connecting nodes, where the mass of the net is concentrated at the nodes. The deformation of the net is evaluated solving the equation of motion of the nodes, subjected to gravity, buoyancy, lift, and drag forces. With respect to the original model, the elasticity of the net is included. In this work the real size of the net is used for the computation mesh grid, this allowing the numerical model to reproduce the exact dynamics of the cage. The numerical model is used to simulate a cage with fixed rings, based on the concept of mooring the cage to the foundation of no longer functioning offshore structures. The deformations of the system subjected to currents and waves are studied.

scholarly journals The Process of Stellar Tidal Disruption by Supermassive Black Holes

2021 ◽  
Vol 217 (3) ◽  
Author(s):  
E. M. Rossi ◽  
N. C. Stone ◽  
J. A. P. Law-Smith ◽  
M. Macleod ◽  
G. Lodato ◽  
...  
Keyword(s):  
Black Holes ◽  
Initial Conditions ◽  
Numerical Models ◽  
Binary Star ◽  
Tidal Disruption ◽  
Massive Black Hole ◽  
Accretion Flows ◽  
Simple Order ◽  
Order Of Magnitude ◽  
A Chain

AbstractTidal disruption events (TDEs) are among the brightest transients in the optical, ultraviolet, and X-ray sky. These flares are set into motion when a star is torn apart by the tidal field of a massive black hole, triggering a chain of events which is – so far – incompletely understood. However, the disruption process has been studied extensively for almost half a century, and unlike the later stages of a TDE, our understanding of the disruption itself is reasonably well converged. In this Chapter, we review both analytical and numerical models for stellar tidal disruption. Starting with relatively simple, order-of-magnitude physics, we review models of increasing sophistication, the semi-analytic “affine formalism,” hydrodynamic simulations of the disruption of polytropic stars, and the most recent hydrodynamic results concerning the disruption of realistic stellar models. Our review surveys the immediate aftermath of disruption in both typical and more unusual TDEs, exploring how the fate of the tidal debris changes if one considers non-main sequence stars, deeply penetrating tidal encounters, binary star systems, and sub-parabolic orbits. The stellar tidal disruption process provides the initial conditions needed to model the formation of accretion flows around quiescent massive black holes, and in some cases may also lead to directly observable emission, for example via shock breakout, gravitational waves or runaway nuclear fusion in deeply plunging TDEs.

scholarly journals Hydraulic transmissivity inferred from ice-sheet relaxation following Greenland supraglacial lake drainages

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ching-Yao Lai ◽  
Laura A. Stevens ◽  
Danielle L. Chase ◽  
Timothy T. Creyts ◽  
Mark D. Behn ◽  
...  
Keyword(s):  
Laboratory Experiments ◽  
Ice Sheet ◽  
Drainage System ◽  
Greenland Ice Sheet ◽  
Field Observations ◽  
Surface Uplift ◽  
Drainage Networks ◽  
Order Of Magnitude ◽  
Lake Drainage ◽  
Magnitude Increase

AbstractSurface meltwater reaching the base of the Greenland Ice Sheet transits through drainage networks, modulating the flow of the ice sheet. Dye and gas-tracing studies conducted in the western margin sector of the ice sheet have directly observed drainage efficiency to evolve seasonally along the drainage pathway. However, the local evolution of drainage systems further inland, where ice thicknesses exceed 1000 m, remains largely unknown. Here, we infer drainage system transmissivity based on surface uplift relaxation following rapid lake drainage events. Combining field observations of five lake drainage events with a mathematical model and laboratory experiments, we show that the surface uplift decreases exponentially with time, as the water in the blister formed beneath the drained lake permeates through the subglacial drainage system. This deflation obeys a universal relaxation law with a timescale that reveals hydraulic transmissivity and indicates a two-order-of-magnitude increase in subglacial transmissivity (from 0.8 ± 0.3 $${\rm{m}}{{\rm{m}}}^{3}$$ m m 3 to 215 ± 90.2 $${\rm{m}}{{\rm{m}}}^{3}$$ m m 3 ) as the melt season progresses, suggesting significant changes in basal hydrology beneath the lakes driven by seasonal meltwater input.

Modeling of Compressor Drum Cavities With Radial Inflow

2016 ◽  
Author(s):  
D. Amirante ◽  
Z. Sun ◽  
J. W. Chew ◽  
N. J. Hills ◽  
N. R. Atkins
Keyword(s):  
Thermal Stratification ◽  
Turbulence Modeling ◽  
Navier Stokes ◽  
Inflow Rate ◽  
Cfd Models ◽  
Flow And Heat Transfer ◽  
Rotating Discs ◽  
Computational Fluid Dynamics Cfd ◽  
Inlet Conditions ◽  
Cooling Air

Reynolds-Averaged Navier-Stokes (RANS) computations have been conducted to investigate the flow and heat transfer between two co-rotating discs with an axial throughflow of cooling air and a radial bleed introduced from the shroud. The computational fluid dynamics (CFD) models have been coupled with a thermal model of the test rig, and the predicted metal temperature compared with the thermocouple data. CFD solutions are shown to vary from a buoyancy driven regime to a forced convection regime, depending on the radial inflow rate prescribed at the shroud. At a high radial inflow rate, the computations show an excellent agreement with the measured temperatures through a transient rig condition. At a low radial inflow rate, the cavity flow is destabilized by the thermal stratification. Good qualitative agreement with the measurements is shown, although a significant over-prediction of disc temperatures is observed. This is associated with under prediction of the penetration of the axial throughflow into the cavity. The mismatch could be the result of strong sensitivity to the prescribed inlet conditions, in addition to possible shortcomings in the turbulence modeling.

Applications of Computational Fluid Dynamics (CFD) Tools for Gravity Concentrators in Coal Preparation

2007 ◽  
Vol 2 (1) ◽  
Author(s):  
Y. K. Xia
Keyword(s):  
Multiphase Flows ◽  
Coupling Effect ◽  
Numerical Models ◽  
Dense Medium ◽  
Hindered Settling ◽  
Heavy Medium ◽  
Computational Fluid Dynamics Cfd ◽  
Dimensional Simulation ◽  
Dense Medium Cyclone ◽  
Lagrange Approach

Extensive progress has been made in using CFD tool in the simulation of multiphase flows in some gravity concentrators. Several case studies for calculation of multiphase flows by different numerical models in spiral, dense medium cyclone, water only cyclones, hindered-settling bed separator, heavy medium vessel and jig are reviewed. The Euler-Lagrange approach in calculation of the particle movement and particle-liquid coupling effect are also discussed. The limitation of Euler-Euler models in the treatment of the particles with a size distribution, and disadvantages of discrete element method (DEM) in description of the jigging processes will be presented. The successful two-dimensional simulation of the hindered-settling bed separator, heavy medium vessel and jig by Euler-Lagrange approach is also addressed.

The Effect of Bench Arrangements on the Natural Ventilation of a Multispan Greenhouse

2013 ◽  
Author(s):  
Sunita Kruger ◽  
Leon Pretorius
Keyword(s):  
Fluid Dynamics ◽  
Natural Ventilation ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Low Velocity ◽  
Lower Velocity ◽  
Cfd Models ◽  
Temperature Distributions ◽  
Computational Fluid Dynamics Cfd ◽  
Plant Level

In this paper, the influence of various bench arrangements on the microclimate inside a two-span greenhouse is numerically investigated using three-dimensional Computational Fluid Dynamics (CFD) models. Longitudinal and peninsular arrangements are investigated for both leeward and windward opened roof ventilators. The velocity and temperature distributions at plant level (1m) were of particular interest. The research in this paper is an extension of two-dimensional work conducted previously [1]. Results indicate that bench layouts inside the greenhouse have a significant effect on the microclimate at plant level. It was found that vent opening direction (leeward or windward) influences the velocity and temperature distributions at plant level noticeably. Results also indicated that in general, the leeward facing greenhouses containing either type of bench arrangement exhibit a lower velocity distribution at plant level compared to windward facing greenhouses. The latter type of greenhouses has regions with relatively high velocities at plant level which could cause some concern. The scalar plots indicate that more stagnant areas of low velocity appear for the leeward facing greenhouses. The windward facing greenhouses also display more heterogeneity at plant level as far as temperature is concerned.

Sign in / Sign up

Export Citation Format

Share Document