scholarly journals Regulation of Structure and Quality of Dried Noodles by Liquid Pre-Fermentation

Foods ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2408
Author(s):  
Xiaoqing Xiong ◽  
Chong Liu ◽  
Xueling Zheng
Keyword(s):  
Breaking Strength ◽  
Tensile Force ◽  
Titratable Acidity ◽  
Cooking Time ◽  
Porous Structures ◽  
Fermentation Time ◽  
Total Titratable Acidity ◽  
Long Time ◽  
Fermentation Technology

Liquid pre-fermentation technology was innovatively applied to the development of dried fermented noodles. The effects of fermentation time (1, 3 and 6 h) and yeast addition (0.2, 0.5 and 1.0 g/100 g of flour) on the quality, microstructure and flavor of dried noodles were also investigated in this study. Conspicuous porous structures and greater thickness of dried noodles were found when the fermentation time was ≤ 3 h and the yeast addition was ≥ 0.5 g/100 g of flour, which contributed to the increase in the breaking strength, cooking time and water absorption. However, when the fermentation time increased to 6 h, finer microporous structures, little change related to thickness and richer flavor levels were detected. Additionally, the total titratable acidity of dried fermented noodles was increased to 3.38–4.43 mL compared with the unfermented noodles (2.15 mL). Weaker gluten network structures caused by long-time fermentation and acidic environment led to lower hardness, chewiness, tensile force and tensile distance of cooked fermented noodles.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Parâmetros físico-químicos de polpas de fruta produzidas na cidade de Petrolina – PE

2015 ◽  
Vol 10 (4) ◽  
pp. 01 ◽  
Author(s):  
A. C. Honorato ◽  
C. B. R. Dias ◽  
E. B. Souza ◽  
I. R. B. Carvalho ◽  
K. S. M. Sousa
Keyword(s):  
Ascorbic Acid ◽  
Physicochemical Parameters ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Fruit Pulp ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
The City

<p>Este trabalho teve como objetivo avaliar os parâmetros físico-químicos de polpas de fruta produzidas e comercializadas na cidade de Petrolina-PE, tendo como referência a Instrução Normativa nº 1, de 7 jan. 2000, do Ministério da Agricultura que define as características físicas e químicas estabelecendo limites mínimos e máximos específicos para cada polpa de fruta. Foram avaliadas duas marcas (1 e 2) de polpas de abacaxi, cacau, caju, graviola, maracujá e umbu, analisadas quanto aos parâmetros de pH, sólidos solúveis totais (SST), acidez total titulável (ATT), ácido ascórbico, relação SST/ATT e sólidos totais. Os resultados permitem inferir que a marca 2 apresentou qualidade superior na maioria dos parâmetros avaliados quando comparado com a marca 1. Entretanto para alguns sabores de polpa as duas marcas não atenderam os valores padrões. Entre as polpas o único sabor que apresentou os padrões exigidos foi a polpa de caju em ambas as marcas, e a que apresentou resultado de pior qualidade diante dos padrões foi a polpa de maracujá principalmente da marca 1. Dessa forma constata-se que há grandes variações entre as marcas, e entre alguns parâmetros, o que compromete a qualidade das polpas, prejudicando assim o consumidor.</p><p align="center"><strong><em>Physicochemical parameters of fruit pulps produced in Petrolina – PE</em></strong></p><p><strong>Abstract</strong><strong>: </strong>This study aimed to evaluate the physicochemical parameters of fruit pulps produced and marketed in the city of Petrolina-PE, with reference to the Instruction Nº 1 of 7 January 2000 of the Ministry of Agriculture, which defines the physical and chemical characteristics setting minimum and maximum limits specific to each fruit pulp. We evaluated two brands (1 and 2) of pineapple, cocoa, cashew, soursop, passion and umbu fruit pulp, analyzed for pH, total soluble solids (TSS), total titratable acidity (TTA), ascorbic acid, TSS / TTA and total solids parameters. Results show that the brand 2 showed superior in most evaluated parameters when compared to the brand 1. However, for some pulp flavors of both brands did not reached the standards values. Among the pulps, the only flavor that presented the required standards was the cashew pulp in both brands, and presented the results of lower quality on the standards was the passion fruit pulp mainly brand 1. Thus, it appears that there are great variations between brands and between some parameters, which compromises the quality of the pulp, thus impairing the consumer.</p>

scholarly journals Productivity and quality of irrigated organic yellow passion fruits in deep planting in Southeastern Amazon

2020 ◽  
Vol 42 (4) ◽  
Author(s):  
Wagner de Moura Francisco ◽  
Sebastião Elviro de Araújo Neto ◽  
Thays Lemos Uchôa ◽  
Luís Gustavo de Souza e Souza ◽  
Nilciléia Mendes da Silva
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organic System ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Total Productivity ◽  
Fruit Mass ◽  
Yellow Passion Fruit

Abstract The aim of this work was to evaluate the effect of irrigation and deep planting of tall yellow passion fruit seedlings in the organic system on fruit quality and productivity. A randomized complete block design with 2x4 subdivided plots, with 8 treatments and 4 blocks was used, with irrigated and rainfed systems being plots and 4 planting depths (0.20 m, 0.40 m, 0.60 m and 0.80 m) subplots. Seedlings aged 90 days and 2 m in height were used. Before planting, all stem leaves were removed from seedlings to be buried and to IBA at concentration of 4,000 mg kg-1 was applied. The number of fruits per plant, average fruit mass and total productivity and of 1st and 2nd crops, as well as total soluble solids (TSS), total titratable acidity (TTA), ratio (TSS/TTA), commercial and equatorial diameter classification were estimated. Irrigated planting at depths of 0.20 m and 0.40 m was more productive in the first crop, but there was no difference in the total productivity and in the second crop. Neither irrigation nor plant depth altered the chemical quality of fruits and commercial classification.

scholarly journals Effect of ultrasonication on sensory and chemical stability of passion fruit juice during refrigerated storage

2018 ◽  
pp. 85 ◽  
Author(s):  
Vicente M. Gomez-Lopez ◽  
Maria E. Buitrago, Amaury Martínez-Yepez
Keyword(s):  
Sensory Quality ◽  
Fruit Juice ◽  
Titratable Acidity ◽  
Passion Fruit ◽  
Refrigerated Storage ◽  
Thermal Methods ◽  
Total Sugars ◽  
Treatment Conditions ◽  
Total Titratable Acidity

Passion fruit juice (PFJ) is very susceptible to thermal degradation and may benefit from processing by non-thermal methods such as sonication. This study pursued to test the effect of sonication on sensory quality and related chemical compounds of PFJ during refrigerated storage. Treatment conditions were those of a previous study where a microbiologically stable PFJ was achieved. The effect of ultrasound (20 kHz, 263 W, 89.25 µm) on sensory quality, ºBrix, total titratable acidity (TTA), ºBrix/TTA and reducing and total sugars of PFJ during storage at 4 ºC up to 10 days was studied. Sonication did not cause significant (P>0.05) effects on TTA, ºBrix/TTA and reducing sugars but significantly (P<0.05) increased ºBrix and total sugars content. Panel scored sonication PFJ significantly (P<0.05) lower in colour, flavour and aroma scores; but the global acceptance was similar (P>0.05) than that of non-sonicated juice. Results indicate that sonication of PFJ is a treatment that does not affect the global sensory quality of the product.

scholarly journals Postharvest Quality of Grape Tomatoes Treated with 1-Methylcyclopropene at Advanced Ripeness Stages

HortScience ◽  
2006 ◽  
Vol 41 (1) ◽  
pp. 183-187 ◽  
Author(s):  
Muharrem Ergun ◽  
Steven A. Sargent ◽  
Donald J. Huber
Keyword(s):  
Ethylene Production ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Fruit Firmness ◽  
Soluble Solids Content ◽  
Respiration Rates ◽  
Total Titratable Acidity ◽  
Solids Content

Grape tomatoes (Lycopersicon esculentum Mill. `Santa') harvested at light-red (>90% color) and full-red stages were treated with 1 μL·L–1 1-methylcyclopropene (1-MCP) for 24 hours at 20 °C and stored at 20 °C. After 1 day of storage, fruit harvested at light-red stage treated with 1-MCP had a 56% lower respiration rate than untreated fruit. By day 7, respiration rates of the two treatments had converged at about 2 mL·kg–1·h–1. Ethylene production of light-red stage tomatoes treated with 1-MPC was 24% lower than untreated during storage, with rates converging by day 11. For fruit harvested full-red, 1-MCP had similar effects on respiration and ethylene production, although convergence occurred earlier, by day 5. Subsequent tests were conducted only with fruit harvested at full-red stage, since fruit harvested at the light-red stage had lower soluble solids content (4.3%) than fruit harvested at the full-red stage (5.5%). Several combinations of 1-MCP concentrations and exposure times were applied at 20 °C: 1 μL·L–1 for 24 h, 5 μL·L–1 for 6 or 12 h, 25 μL·L–1 for 6 or 12 h, and 50 μL·L–1 for 6 or 12 h; following the respective pretreatment fruits were stored at 20 °C. 1-MCP pretreatment extended marketable life by 1 d, irrespective of pretreatment regime, where untreated and pretreated fruit remained marketable (<15% of fruit soft, decayed and/or shriveled) for 6 and 7 d, respectively. However, 1-MCP did not affect whole fruit firmness, epidermal color, internal color, soluble solids content (6.5%), total titratable acidity (0.64%), or pH (4.3). In a third test simulating commercial handling procedures, full-red harvested tomatoes were treated with 1 μL·L–1 1-MCP for 24 h at either 13 or 20 °C, stored for 4 d at 13 °C, and then transferred to 20 °C. Under these conditions, marketable life for untreated and 1-MCP-treated tomatoes was 7 and 8 d, respectively.

scholarly journals The Impact of Salt on the Quality of Fresh Wheat Noodle

2017 ◽  
Vol 21 (2) ◽  
pp. 53-61 ◽  
Author(s):  
Yunfeng Hu ◽  
Jinjin Wei ◽  
Yuanyuan Chen
Keyword(s):  
Tensile Properties ◽  
Network Structure ◽  
Tensile Force ◽  
Salt Content ◽  
Cooking Time ◽  
Rheological Parameters ◽  
Internal Network ◽  
Stability Time ◽  
The Impact

AbstractThe purpose is to analyze the concentration-response relationship of salt on the rheological properties, cooking characteristic and microstructure of fresh noodle and investigate the influence rules of salt on rheological characteristics, cooking characteristics and microstructure of fresh noodle. The change rules of rheological parameters, cooking characteristics and microstructure were analyzed using the refined wheat flour as the experimental material, adding different proportion of salt (0 up to 5% weight on flour basis), making fresh noodles. Results showed that the dough formation time, stability time, the maximum tensile force and tensile range increased gradually, weakening degree and the best cooking time decreased gradually, in addition, the internal network structure was fine-meshed with the increase of salt content. But the tensile distance began to decline, the network structure became loose and the hole enlarged when adding amount surpassed 3%. Taken together, adding 3% of the salt can improve the quality of fresh noodle. Research conclusions: the right amount of salt can improve the opaque quality index and tensile properties, reduce water absorption and optimum cooking time, enhance the internal network structure; but excessive salt will reduce the tensile properties of noodles and cooking characteristics, black or even destroy the production of internal network structure.

scholarly journals Cricket-Enriched Oat Biscuit: Technological Analysis and Sensory Evaluation

Foods ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1561
Author(s):  
Barbara Biró ◽  
Mária Anna Sipos ◽  
Anikó Kovács ◽  
Katalin Badak-Kerti ◽  
Klára Pásztor-Huszár ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Acheta Domesticus ◽  
Technological Parameters ◽  
House Cricket ◽  
Control Product ◽  
Brown Colour ◽  
Total Titratable Acidity ◽  
Positive Effect ◽  
Technological Analysis

Insect-containing products are gaining more space in the market. Bakery products are one of the most promising since the added ground insects can enhance not only the nutritional quality of the dough, but technological parameters and sensory properties of the final products. In the present research, different amounts of ground Acheta domesticus (house cricket) were used to produce oat biscuits. Colour, hardness, and total titratable acidity (TTA) values were measured as well as a consumer sensory test was completed using the check-all-that-apply (CATA) method. An estimation of nutrient composition of the samples revealed that, according to the European Union’s Regulation No. 1924/2006, the products with 10 and 15 g/100 g cricket enrichment (CP10 and CP15, respectively) can be labelled as protein sources. Results of the colour, TTA, and texture measurements showed that even small amounts of the cricket powder darkened the colour of the samples and increased their acidity, but did not influence the texture significantly. Among product-related check all that apply (CATA) attributes, fatty and cheesy flavour showed a significant positive effect on overall liking (OAL). On the other hand, burnt flavour and brown colour significantly decreased OAL. OAL values showed that consumers preferred the control product (CP0) and the product with 5 g/100 g cricket enrichment (CP5) samples over CP10 and rejected CP15.

scholarly journals Production, chemical composition, and quality of Arabic coffee subjected to copper doses

2018 ◽  
Vol 53 (4) ◽  
pp. 443-452 ◽  
Author(s):  
Herminia Emilia Prieto Martinez ◽  
José Soares de Lacerda ◽  
Junia Maria Clemente ◽  
Jaime Barros da Silva Filho ◽  
Adriene Woods Pedrosa ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Organic Acids ◽  
Titratable Acidity ◽  
Coffee Bean ◽  
Total Phenols ◽  
Cu Content ◽  
Coffee Beans ◽  
Total Titratable Acidity ◽  
Effect Of Copper

Abstract: The objective of this work was to evaluate the effect of copper on the chemical composition of coffee beans and on the quality of the beverage, relating both of them to the Cu leaf contents in coffee (Coffea arabica) plants. Coffee plants were grown in a hydroponic system containing 0.2, 0.4, 0.8, 1.6, and 3.2 μmol L-1 Cu until fruit setting. Coffee bean production was evaluated, and, after the cherries were dried, the following characteristics were determined: leaf Cu content; total titratable acidity; color index; electrical conductivity; leached K; polyphenol oxidase (PPO) activity; concentrations of caffeine, trigonelline, organic acids, total phenols, chlorogenic acids (3-CQA, 4-CQA, and 5-CQA), sucrose, glucose, arabinose, mannose, and galactose; and sensory quality of roasted beans. Cu increased bean yield, PPO activity, and the concentrations of organic acids, 3-CQA, sucrose, and arabinose. Total titratable acidity, total phenols, 4-CQA, and 5-CQA were reduced with increasing Cu doses. Leaf contents related to the maximum and minimum values of desirable and undesirable quality attributes ranged from 5.6 to 11.4 mg kg-1 Cu, respectively. Copper affects the production and chemical composition of coffee beans, and the attributes related to quality are maximized in plants with low leaf contents of the nutrient.

scholarly journals Postharvest mechanical damage affects fruit quality of 'Montenegrina' and 'Rainha' tangerines

2009 ◽  
Vol 44 (12) ◽  
pp. 1636-1640 ◽  
Author(s):  
Cândida Raquel Scherrer Montero ◽  
Lígia Loss Schwarz ◽  
Liege Cunha dos Santos ◽  
Cristiane Salete Andreazza ◽  
Carolina Pereira Kechinski ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Mechanical Damage ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Internal Quality ◽  
Color Changes ◽  
Randomized Design ◽  
Total Titratable Acidity ◽  
Completely Randomized Design

The objective of this work was to evaluate the visual and chemical quality of tangerines after mechanical damage by impacts. The tangerine cultivars Montenegrina and Rainha were submitted to different degrees of impact and evaluated for decay and oleocellosis, loss of fresh weight, total soluble solids, total titratable acidity and ascorbic acid degradation, as well as for epicarp color changes. Experiments with three replicates and experimental units of six fruit for each cultivar were done in a completely randomized design. Impact produced qualitative internal and minor external changes on tangerines. The main modifications produced by impact on the fruit were losses of citric acid and soluble solids, which increased the solid:acid ratio, and losses of ascorbic acid. 'Montenegrina' tangerines are more susceptible to internal quality damage than 'Rainha'.

scholarly journals Effect of the addition of psyllium (plantago ovata forsk) on the physicochemical characteristics of frozen banana pulp during storage

2021 ◽  
Vol 10 (8) ◽  
pp. e10510816997
Author(s):  
Elisangela Aparecida Nazario Franco ◽  
Davy William Hidalgo Chávez ◽  
Antonia Barbosa de Lima ◽  
Maria do Socorro Rocha Bastos ◽  
Nathália Ramos de Melo
Keyword(s):  
Storage Period ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Health Claims ◽  
Soluble Fiber ◽  
Significant Difference ◽  
Total Titratable Acidity ◽  
Different Temperatures ◽  
Gastric Emptying Time

Psyllium is a soluble fiber that has aroused the interest of several researchers for presenting proven functional benefits such as reducing LDL cholesterol, controlling blood glucose, delaying gastric emptying time among others. This study aimed to elaborate a banana pulp added psyllium and verify the effect on the physicochemical parameters (pH, total titratable acidity, color and rheology) during 90 days of storage under different temperatures (- 8 °C and – 18 °C). The results showed that the addition of 3% psyllium altered some parameters: the pH did not present a significant difference at time 0, but at times 30 and 60 it showed a difference and at the end of storage it did not show any difference, the ATT did not change at time 0 , but from time 30 it showed a significant decrease until the end of the storage period, the psyllium having a darker color than the banana reduced the luminosity (L *), it was verified that the addition of psyllium increased the apparent viscosity of the pulp. Psyllium has the potential to be used in banana pulp, since the changes in pH and TTA did not affect the quality of the product and meet the recommended by the current quality and identity standard for banana pulp, being a viable product with functional properties that can receive health claims.

Sign in / Sign up

Export Citation Format

Share Document