scholarly journals Organelle Genetics in Plants

2021 ◽  
Vol 22 (4) ◽  
pp. 2104
Author(s):  
Pedro Robles ◽  
Víctor Quesada
Keyword(s):  
Rna Editing ◽  
Posttranscriptional Regulation ◽  
Genome Engineering ◽  
Plant Mitochondria ◽  
Plastid Dna ◽  
Chloroplast Genomes ◽  
Wide Range ◽  
Organelle Genetics ◽  
Selection Of

Eleven published articles (4 reviews, 7 research papers) are collected in the Special Issue entitled “Organelle Genetics in Plants.” This selection of papers covers a wide range of topics related to chloroplasts and plant mitochondria research: (i) organellar gene expression (OGE) and, more specifically, chloroplast RNA editing in soybean, mitochondria RNA editing, and intron splicing in soybean during nodulation, as well as the study of the roles of transcriptional and posttranscriptional regulation of OGE in plant adaptation to environmental stress; (ii) analysis of the nuclear integrants of mitochondrial DNA (NUMTs) or plastid DNA (NUPTs); (iii) sequencing and characterization of mitochondrial and chloroplast genomes; (iv) recent advances in plastid genome engineering. Here we summarize the main findings of these works, which represent the latest research on the genetics, genomics, and biotechnology of chloroplasts and mitochondria.

scholarly journals Plugging Small RNAs into the Network

mSystems ◽  
2020 ◽  
Vol 5 (3) ◽  
Author(s):  
Lars Barquist
Keyword(s):  
Small Rnas ◽  
Posttranscriptional Regulation ◽  
Network Inference ◽  
Functional Characterization ◽  
The State ◽  
Diverse Range ◽  
Regulatory Interactions ◽  
Link Type ◽  
Wide Range

ABSTRACT Small RNAs (sRNAs) have been discovered in every bacterium examined and have been shown to play important roles in the regulation of a diverse range of behaviors, from metabolism to infection. However, despite a wide range of available techniques for discovering and validating sRNA regulatory interactions, only a minority of these molecules have been well characterized. In part, this is due to the nature of posttranscriptional regulation: the activity of an sRNA depends on the state of the transcriptome as a whole, so characterization is best carried out under the conditions in which it is naturally active. In this issue of mSystems, Arrieta-Ortiz and colleagues (M. L. Arrieta-Ortiz, C. Hafemeister, B. Shuster, N. S. Baliga, et al., mSystems 5:e00057-20, 2020, https://doi.org/10.1128/mSystems.00057-20) present a network inference approach based on estimating sRNA activity across transcriptomic compendia. This shows promise not only for identifying new sRNA regulatory interactions but also for pinpointing the conditions in which these interactions occur, providing a new avenue toward functional characterization of sRNAs.

scholarly journals Pipeline for the Generation and Characterization of Transgenic Human Pluripotent Stem Cells Using the CRISPR/Cas9 Technology

Cells ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 1312 ◽  
Author(s):  
Joffrey Mianné ◽  
Chloé Bourguignon ◽  
Chloé Nguyen Van ◽  
Mathieu Fieldès ◽  
Amel Nasri ◽  
...  
Keyword(s):  
Stem Cells ◽  
Cell Lines ◽  
Pluripotent Stem Cells ◽  
Genome Engineering ◽  
Disease Modeling ◽  
Mutant Cell ◽  
Point Mutations ◽  
Human Pluripotent Stem Cells ◽  
Wide Range

Recent advances in genome engineering based on the CRISPR/Cas9 technology have revolutionized our ability to manipulate genomic DNA. Its use in human pluripotent stem cells (hPSCs) has allowed a wide range of mutant cell lines to be obtained at an unprecedented rate. The combination of these two groundbreaking technologies has tremendous potential, from disease modeling to stem cell-based therapies. However, the generation, screening and molecular characterization of these cell lines remain a cumbersome and multi-step endeavor. Here, we propose a pipeline of strategies to efficiently generate, sub-clone, and characterize CRISPR/Cas9-edited hPSC lines in the function of the introduced mutation (indels, point mutations, insertion of large constructs, deletions).

scholarly journals Limited aromatic pathway genes diversity amongst aromatic compound degrading soil bacterial isolates

Genetika ◽  
2013 ◽  
Vol 45 (3) ◽  
pp. 703-716 ◽  
Author(s):  
Gordana Minovska ◽  
Tanja Narancic ◽  
Mina Mandic ◽  
Lidija Senerovic ◽  
Branka Vasiljevic ◽  
...  
Keyword(s):  
Environmental Samples ◽  
Bacterial Isolates ◽  
Degenerate Primers ◽  
Novel Genes ◽  
Biodegradation Pathway ◽  
Wide Range ◽  
Aromatic Pathway ◽  
Identification And Characterization ◽  
Selection Of

Identification and characterization of novel genes belonging to microbial aromatic biodegradation pathway is of great importance as they have been proven versatile biocatalysts. In this study, the selection of 19 environmental bacterial isolates capable to degrade a wide range of aromatic compounds has been screened for the presence of five genes from the lower and the upper aromatic biodegradation pathway using PCR methodology. In the case of 4-oxalocrotonate tautomerase and toluene dioxygenases, although present in the most of environmental isolates, very limited diversity of the genes has been encountered. Highly conserved sequences of these genes in environmental samples revealed high homology with gene sequences of the characterized corresponding genes from Pseudomonas putida species. The screen using degenerate primers based on known catechol-and naphthalene dioxygenases sequences resulted in a limited number of amplified fragments. Only two catechol 2,3-dioxygenase from two Bacillus isolates were amplified and showed no significant similarities with dioxygenases from characterized organisms, but 80-90% identities with partial catechol 2,3-dioxygenase sequences from uncultured organisms. Potentially three novel catechol 1,2-dioxygenases were identified from Bacillus sp. TN102, Gordonia sp. TN103 and Rhodococcus sp. TN112. Highly homologous tautomerase and toluene dioxygenases amongst environmental samples isolated from the contaminated environment suggested horizontal gene transfer while limited success in PCR detection of the other three genes indicates that these isolates may still be a source of novel genes.

Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability

1968 ◽  
Vol 26 ◽  
pp. 442-443 ◽  
Author(s):  
L.E. Murr ◽  
A.B. Draper
Keyword(s):  
Electron Microscopy ◽  
State Physics ◽  
Test Material ◽  
Milling Machine ◽  
Rotary Table ◽  
Solid State Physics ◽  
Materials Properties ◽  
Transmission Electron ◽  
Selection Of

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

Synthesis, Characterization and Antiproliferative Activity Assessment of a Novel 1H-5-mercapto-1,2,4 Triazole Derivative

2017 ◽  
Vol 68 (4) ◽  
pp. 745-747 ◽  
Author(s):  
Marius Mioc ◽  
Sorin Avram ◽  
Vasile Bercean ◽  
Mihaela Balan Porcarasu ◽  
Codruta Soica ◽  
...  
Keyword(s):  
Antiproliferative Activity ◽  
Biological Activities ◽  
Cancer Cell Line ◽  
Vascular Endothelial ◽  
Triazole Derivative ◽  
Activity Assessment ◽  
Wide Range ◽  
Specific Receptors ◽  
Endothelial Growth Factor ◽  
Selection Of

Angiogenesis plays an important function in tumor proliferation, one of the main angiogenic promoters being the vascular endothelial growth factor (VEGF) which activates specific receptors, particularly VEGFR-2. Thus, VEGFR-2 has become an essential therapeutic target in the development of new antitumor drugs. 1,2,4-triazoles show a wide range of biological activities, including antitumor effect, which was documented by numerous reports. In the current study the selection of 5-mercapto-1,2,4-triazole structure (1H-3-styryl-5-benzylidenehydrazino-carbonyl-methylsulfanil-1,2,4-triazole, Tz3a.7) was conducted based on molecular docking that emphasized it as suitable ligand for VEGFR-2 and EGFR1 receptors. Compound Tz3a.7 was synthesized and physicochemically and biologically evaluated thus revealing a moderate antiproliferative activity against breast cancer cell line MDA-MB-231.

Polymer Chemistry

2004 ◽  
Keyword(s):  
Conducting Polymers ◽  
Liquid Crystalline ◽  
Polymer Chemistry ◽  
Chain Growth ◽  
Crystalline Polymers ◽  
Wide Range ◽  
Cyclic Oligomers ◽  
Step Growth

Polymer Chemistry: A Practical Approach in Chemistry has been designed for both chemists working in and new to the area of polymer synthesis. It contains detailed instructions for preparation of a wide-range of polymers by a wide variety of different techniques, and describes how this synthetic methodology can be applied to the development of new materials. It includes details of well-established techniques, e.g. chain-growth or step-growth processes together with more up-to-date examples using methods such as atom-transfer radical polymerization. Less well-known procedures are also included, e.g. electrochemical synthesis of conducting polymers and the preparation of liquid crystalline elastomers with highly ordered structures. Other topics covered include general polymerization methodology, controlled/"living" polymerization methods, the formation of cyclic oligomers during step-growth polymerization, the synthesis of conducting polymers based on heterocyclic compounds, dendrimers, the preparation of imprinted polymers and liquid crystalline polymers. The main bulk of the text is preceded by an introductory chapter detailing some of the techniques available to the scientist for the characterization of polymers, both in terms of their chemical composition and in terms of their properties as materials. The book is intended not only for the specialist in polymer chemistry, but also for the organic chemist with little experience who requires a practical introduction to the field.

Effect of Contact Ratio on Spur Gear Dynamic Load With No Tooth Profile Modifications

1996 ◽  
Vol 118 (3) ◽  
pp. 439-443 ◽  
Author(s):  
Chuen-Huei Liou ◽  
Hsiang Hsi Lin ◽  
F. B. Oswald ◽  
D. P. Townsend
Keyword(s):  
Dynamic Load ◽  
Spur Gear ◽  
Tooth Size ◽  
Contact Ratio ◽  
Gear Dynamics ◽  
Wide Range ◽  
Gear Contact ◽  
Center Distance ◽  
Selection Of ◽  
Better Than

This paper presents a computer simulation showing how the gear contact ratio affects the dynamic load on a spur gear transmission. The contact ratio can be affected by the tooth addendum, the pressure angle, the tooth size (diametral pitch), and the center distance. The analysis presented in this paper was performed by using the NASA gear dynamics code DANST. In the analysis, the contact ratio was varied over the range 1.20 to 2.40 by changing the length of the tooth addendum. In order to simplify the analysis, other parameters related to contact ratio were held constant. The contact ratio was found to have a significant influence on gear dynamics. Over a wide range of operating speeds, a contact ratio close to 2.0 minimized dynamic load. For low-contact-ratio gears (contact ratio less than two), increasing the contact ratio reduced gear dynamic load. For high-contact-ratio gears (contact ratio equal to or greater than 2.0), the selection of contact ratio should take into consideration the intended operating speeds. In general, high-contact-ratio gears minimized dynamic load better than low-contact-ratio gears.

Sign in / Sign up

Export Citation Format

Share Document